Onderwerp Opties 
|
|
|
|
Stem op dit onderwerp
|
|
|
|
|
#1515646 - 14/06/2008 10:41
Re: Enigma 2 op de UFS 910!!!
[Re: Satlook]
|
Satlook
Sat4all Core Member
Geregistreerd: 01/06/2000
Berichten: 1444
Uit: Zuid Holland
|
De link mag niet zo te zien , dan zo maar:
It looked like a hoax in the past, but now it's finally true, you can now run Enigma 2 on the UFS 910! Team Ducktales did release their proof of concept Image.
Enigma 2 is a framework for Linux receivers & is the default interface for several Dreambox receivers, like the DM800.
Release notes
Team DuckTales proudly presents the first enigma2 alpha image for Kathrein UFS-910.
This image should be seen as a proof of concept - there are many bugs and some hardware
which is not supported at the moment. If you are a developer, and you have experience in
(embedded)hardware/linux-dvb-api coding feel free to contact us - you're welcome!
To test this enigma2 image you need a running nfs server and a serial & network
connection to the receiver.
1. extract the tgz file on the server and set the directory in /etc/exports
for example:
/nfs/target_enigma2 192.168.0.0/24(rw,no_root_squash,sync,no_subtree_check)
2. restart nfs server
3. connect via serial console to the receiver
4. turn on the receiver and hit enter in serial console
you should see the following prompt:
Hit any key to stop autoboot: 0
STB7100-REF>
5. customize the follwoing settings to your network environment and type them into the
serial console (without the doublequotes):
"set ipaddr '192.168.0.25'"
"set serverip '192.168.0.1'"
"set gateway '192.168.0.1'"
7. to set the bootargs also type:
"set bootargs 'console=ttyAS0,115200 root=/dev/nfs nfsroot=/nfs/target_enigma2 rw ip={$ipaddr}:{$serverip}:{$gateway}:255.255.255.0:kathrein:eth0:off mem=64m coprocessor_mem=4m@0x10000000,4m@0x10400000 nwhwconf=device:eth0,hwaddr:${ethaddr}'"
"setenv bootcmd 'nfs a5000000 {$serverip}:/nfs/target_enigma2/boot/uImage;bootm a5000000'"
where /nfs/target_enigma2 is the directory you added to /etc/exports
8. to save the settings type "saveenv"
9. simply type "boot" or restart the receiver with the power-switch. now enigma2 should boot.
You can download the Image
Bijlagen
Omschrijving:
_________________________
Triple dragon. ( PICmod cronbear1 image)
Kathrein ufs 910. (PICmod image )
Echostar 7000 via.
DM 500 (2x PLI )
Gregorian 120 & 90 cm.
|
|
Omhoog
|
|
|
|
|
|
|
|
|
|
|
|
#1515647 - 14/06/2008 10:41
Re: Enigma 2 op de UFS 910!!!
[Re: Satlook]
|
Bangkok By Night
Lid
Geregistreerd: 21/04/2008
Berichten: 32
|
Ik heb medelijden met hen die de Kathy al ingeruild hebben voor een DM800 
|
|
Omhoog
|
|
|
|
|
|
|
|
|
|
|
|
#1515702 - 14/06/2008 12:48
Re: Enigma 2 op de UFS 910!!!
[Re: Satellite Europe]
|
nlrela
Volwaardig lid
Geregistreerd: 05/02/2003
Berichten: 259
Uit: Zwitserland
|
Bij mij is de DM800 (inderdaad besteld vanwege enigma2) nog steeds niet aangekomen....
Is er eigenlijk al een held die het uitgeprobeerd heeft, of blijft iedereen de kat uit de boom kijken ?
_________________________
DM7000, DM800HD, Kathrein UFS910, Philips 100cm, 2x Quad Alps, 2x Quad Humax
|
|
Omhoog
|
|
|
|
|
|
|
|
Moderator: Murdock, EasySat
|
|
|
|
41068 Leden
49 Forums
247041 Onderwerpen
1543566 Berichten
458 berichten in de afgelopen 24 uur
Max Online: 336 @ 16/04/2008 20:22
|
|
|
|
|
|
|
Je kunt nu Enigma 2 op de UFS 910 draaien! Team Ducktales kreeg 't voor elkaar om 'n Enigma 2 Image te laten draaien op de UFS 910.
trouwens
