				**** DISCLAIMER ***

This procedure has been tested many times with success but remember does not mean will work in all cases so be respectfull to the work done till now for our humaxes.


Settings "HICK-UP" which means any strange behaviour you are experiencing with your box such ex: wrong handling of simul and multi crypt or simple AV or 0000. All these can be reduced but you never will have 100% problem free box, which is all the fun to play with :-))


1. Upload the "Delete All The Channels.hdf" file which has been created to total removal of any trace of previous settings. 

2. Upload the channel settings list *** REMEMBER to check them always !!! ex: Rule of thumb 16 for Dual and 32 for motorized *** 

3. Upload the PMCT-Table (ToH2.0) for ITA only(HB/Astra) for sync of time and compatibility between +CAM and Aston 1.05 


Anyway when such problem happens more than once is good to redo from scratch:

Follow this sequence

Upload "Delete All The Channels.hdf" --> Upload the Full Original vs (HIC 1.05.00.hdf) for your Rec (5400old) --> Upload latest +CAM/ToH vs ---> Upload correct channel settings ---> Upload correct PMCT-table to your rec.

That is it 


Good Luck to ALL

Special thanks to all m8 that have been hard working to make this receiver better and better 

ToH Team 
+CAM (PH)
and all the m8 that put effort to overcome problems on the receiver.

P.S. 

Delete All The Channel.hdf  is not made by me but someone else did  so all Credits goes to him (i just fixed a very small thing) 

Channel settings are a mix from LuKe(hnf)-DxAndy(dvb) and my personal touch putting them togheter for my use ;-)).

PMCT-Table are based mostly on collecting and recheking all the ECM and Ids and comps to solve probs(MM9600 the king). Also Thanks again to ToH Team we can now fix time shifts too !!!!  Waiting for real time flash changes for PMCT :-))

Regards
RuXoR