Tips for settings that are special for each receiver.


Force Dmaster 1030-1133S  with V49 software
===========================================
lincardemu.rc: (for viaccess and conax sections)
baud=9600

ATR/Reset tips:
For Force Dmaster 1030-1133  V49 software :
Instead of taking the season interface in and out, try following:
1. set in standby (off) 
2. the red LED to the left of the LED-DISPLAY on the receiver will turn on
3. just as the green LED to the left of the display turns on press "OK" on the remote. (and later "Exit")


Force  1144-2055S 
=================
baud=8861  ; or 9600 


Humax 5350
==========
[Viaccess]
baud=10472

Conax CAM 4.00
==============
[Conax]
baud=8861


TOPFIELD 3000/4000
=================== 
[Conax]  
   ......cut.....
baud=10472
parity=even  
direct  
atr = 3b 24 00 30 42 30 30 


Pioner/Grundig/Phillips rental boxes
====================================
does not work with LCE.

[Conax]
 ....cut.....
baud=9600
atr = 3b 24 00 30 42 30 30 
