##############################################################################
##
## FLASH WIZARD localization file
## !!! DO NOT LEAVE ANY TEXT LINE EMPTY:
## !!! ALWAYS PUT THE COMMENT "#" POUND AT THE BEGINNING OF UNUSED LINES
##
## !!! NO SPACES at the end of text lines! Spaces will be added automatically
##
##############################################################################
##
English
English translation by Musicbob
www.satnews.it
##
###############################################
## Hello msg + Principal buttons text         #
###############################################
##
Welcome to FlashWizard PRO! Written by MusicBob - SatNews.it
Install a firmware into FLASH memory
Install or remove a firmware in MULTIBOOT
Configuration and Utilities
Install automatically an image in flash memory
Install or remove automatically an image on multiboot, on Usb Stick and Hard Disk
FlashWizard configuration and utilities panel
About FlashWizard...
##
###############################################
## "Install on Flash memory" window           #
###############################################
##
Install on FLASH
Drag&&Drop a file here, or open folder: 
Recent firmwares
Connect
Settings Backup
Sending Firmware
Sending AutoFlashErase procedure
Initializing Flash memory
Writing and verifying Cramfs memory partition
Rebooting Dreambox
Restoring settings
Settings copy
Settings Backup
Drag and drop here an image file to install (or one from the recent box)
Recently installed images. Right mouse button for options menu
Are you sure you want to install
is not a valid firmware file.
is not a firmware that can be installed in flash.
It is too big for flash memory, try to install it in multiboot mode.
not connected
Unable to connect to address
Invalid Login or Password.
Possible reason: maybe new firmware has different login and/or password.
Please check connection parameters.
Installing
connected to
Finished. Total time
minutes and
seconds.
Installing of firmware
successfully terminated.
Go to Stand-by mode before installing
Switching DreamBox to stand-by mode...
blocks rewritten
##
################################################
## Texts to be displayed on Enigma window      #
## NO SPACES HERE !!!                          #
## !!! Be sure to put %20 instead of spaces!!! #
################################################
##
Installing%20firmware
Please%20wait...
Finished!%20%20Total%20time:%20
%20minutes%20and%20
%20seconds.
##
################################################
## "Install in Multiboot" window               #
################################################
##
Install on MULTIBOOT
Install image
Utilities
Drag&&Drop a file here, or open folder:
Connecting to Dreambox
Sending image
Installing
Image setup and init
Set new image as default choice on FlashWizard PRO boot menu
Restart Dreambox when finished
on flash:
on multiboot:
Remove
Rename
Boot
Telnet Here!
Checking devices...
Autodetect...
not found
No images found on
installed images on
Format Usb
Mount Usb
Image installed successsfully!
##
The Boot Menu of FlashWizard PRO is not installed
on flash image. Do you want to install it now?
Boot Menu installed successfully. Multiboot install enabled.
Multiboot disabled:
you must install the BootMenu for having it enabled.
Choose install device:
Unable to install: neither Hard Disk or Usb Stick were found.
##
You can't remove the currently loaded and 
running image (pointed by the red arrow).
No changes were made.
##
Do you really want to delete
Deleting image
##
################################################
## "Configuration and Utilities" window        #
################################################
##
FlashWizard Configuration and Utilities
Connecting parameters
Settings
Language
Utilities
No Dreambox settings files found in the selected folder.
Please, select another directory.
Warning: "satellites.xml" file is not present!
copy settings from a given directory
also copy the programmed recordings list (TimerList)
Settings folder:
Send all settings now!
< choose a directory >
Format Usb Stick
Reset
Software
Hardware
Remove FlashWizad Pro
FlashWizard PRO has been removed from the flash image.
##
################################################
## Various Strings (errors and more)           #
################################################
##
A new release of FlashWizard is available!
Do you want to download it from the official site?
Unable to create temp work directory!
You must login on Windows as System Administrator
to have the permission to create files and folders.
transferred bytes
Please, choose a settings directory and select one of the files to confirm:
Please select a Dreambox firmware to install (image files [*.IMG]):
Sending settings...
Connecting...
All settings sent successfully.
##
No free space available to install
a new image in multiboot.
##
Name of the image
Rename the image
New name for the image:
The entered name is already present, please retry.
Error while installing.
Wait please...
Dreambox rebooted.
Deleting...
##
Opens SmartTelnet window on the root directory of the selected image.
Delete selected image from multiboot menu
Rename selected image (22 characters max)
Drag&&Drop an image file here to install it in multiboot
Images installed on multiboot.
No image installed yet.
Base image on flash memory, kernel version shown between brackets.
Set the image as default choice on FlashWizard Pro boot menu on next restart
Click here to refresh all informations about the images installed
##
WARNING: file "satellites.xml" was not found in settings files.
##
is selected and
set as default boot image on next restart.
Reboot Dreambox now?
Are you sure you want to reboot?
Enigma has started the soft reboot procedure.
Dreambox will be rebooted in a few seconds.
##
## FORMAT E MOUNT USB:
##
Usb stick successfully mounted
Mounting error. Usb Stick not found or not yet formatted!
Unable to unmount the Usb Stick.
Probably the currently running image is not the flash image.
Or another program is using it (FTP or Telnet clients)
To format the Usb Stick, you must boot from the flash image.
Are you sure you want to format the Usb Stick?
Connecting
Usb Stick successfully formatted and linked
Unable to format and mount the Usb Stick!
No Usb Stick found!
Available free space:
##
########
##
A powerful firmware installer for Dreambox DM7000, with
channels, bouquets, settings and timerlist copy and restore options.
FlashWizard allows to install Dreambox images directly from 
Windows desktop via drag and drop, performing automatically
all the needed procedures (including reboot and flash erase).
No more buttons to press on Dreambox panel!
Images can be installed in Flash memory or Multiboot, on Hard Disk
and/or Usb Stick, even together: they will be automatically
recognized at boot-up time.
FlashWizard allows also to make complete Backups of the installed
images, both for flash memory and multiboot, that can be restored
at anytime, even on other dreamboxes than yours.
FlashWizard PRO has his own boot menu in 256 colors, that 
allows to display the boot logo (the starting picture) also for
the images installed in multiboot on Usb Stick or Hard Disk.
And, more, the VCR Scart output is enabled by FlashWizard PRO
boot menu, even at boot time.
Written by MusicBob - Official support forum:
http://www.satnews.it/vbforum/forumdisplay.php?f=28
###
### BACKUP RESTORE ######
###
Image Backup
Flash Image Backup
Size
Performing image backup, wait please...
Not enough space for performing backup!
For this image, you need
Checking size...
Displays the size of the selected image
Performs the complete backup of the selected image automatically
Checking free space...
FlashWizard is ready to start the backup of
Path of the image:
Temp space needed for the backup
Copying files...
Archiving image...
Backup successfully completed!
is a flash memory backup, it can't be installed on multiboot.
You should restore it from the "Install in FLASH" window.
is a multiboot backup, it can't be installed in flash memory.
You should restore it from the "Install on MULTIBOOT" window.
##
Sure to restore the backupped image
Free space needed is
Not enough free space for restoring on
You need
free space, try to delete some installed image(s).
Ready to begin the restoring of
Temporary space needed for restoring
##
Unable to restore: not enough free space for temp files.
Restoring image, please wait...
Reading of the archive...
Finishing restore...
Restore successfully completed!
Save backup as:
Reading Jffs2 partition...
Copying file...
Reading Cramfs partition...
Erasing Jffs2 partition...
Writing Jffs2 partition...
Erasing Cramfs partition...
Writing Cramfs partition...
Dreambox is rebooting the new image.
Warning: DO NOT flash erase!!
Performs automatically a complete backup of the flash image
FlashWizard update
Check if available on official site
No new version available yet.
Settings Backup and Restore
include the TimerList
Receive and save dreambox's settings
Choose a folder
Settings successfully saved into "My Last Settings" folder.
##
#### NEW in 4.5
##
An old FlashWizard PRO version has been detected on
your flash image, and will be automatically updated.
Copy text to clipboard (CTRL-C)
Paste text from clipboard (CTRL-V)
Logo
Choose a new logo for the selected image
The selected file is not a valid Logo file.
New Logo successfully saved.
Error while writing the logo file..
Insert a new Logo for the selected image (will be visible on next reboot)
SmartSettings Copy from active image
Could not find the "enigma" directory
(maybe the currently active image is a Neutrino)
Unable to do the SmartSettings copy procedure.
##
##
## END_OF_FILE :-)
##
################################################
