#gbox config file

# Trace/Debug
# xx yz ; xx=00 no konsole output
# xx yz ; xx=01 konsole output
# xx yz ; y=0 debug output (don´t use)
# xx yz ; y=1 no debug output
# xx yz ; z=0 ouput to konsole
# xx yz ; z=1 output to /var/tmp/debug.txt
# xx yz ; z=2 Output to UDP (to capture with gboxt)
Z: { 00 12 } 192.168.1.104 8024

#     00 auto
#     01 80X86
#     02 MPC823
#     03 IBM STB04xxx
#        00 auto
#        01 ibm
#        02 api2
#        03 api3
#           00 cw write style = use internal routine (only dbox2)
#           01 cw write style = CA_SET_DESCR type1 (dbox2, vdr)
#           02 cw write style = CA_SET_DESCR type2
#           03 cw write style = CA_SET_DESCR type3
#           04 cw write style = 16 byte /proc/bus/gtx
#           05 cw write style = 4096 byte /proc/bus/gtx, cw offset=0x04D0
#              xx write cw in 1st device with index=xx
#                 yy write cw in 2nd device with index=yy
#                      01 means with .index=0 (default)
#                      02 means with .index=1
#                      03 means with .index=0 and .index=1
#                      .. any bitwise combination ... 
#                      FF means with all 8 indexes (0-7)

# PPC files,folders,devices
#          folder/device             comment
#F: { 01 } /var/tmp/pmt.tmp          // pmt file
#F: { 02 } /var/tmp/emm.info         // key update log file
#F: { 03 } /var/tmp/ecm.info         // ecm info file
#F: { 11 } /var/keys                 // folder for config files
#F: { 12 } /var/tmp                  // folder for temporary file
#F: { 13 } /var/tmp                  // folder for keyfiles
#F: { 21 } /dev/dvb/adapter0/ca0     // ca device
#F: { 22 } /dev/dvb/adapter0/dvr0    // dvr device
#F: { 23 } /dev/dvb/adapter0/demux0  // demux device
#F: { 31 } /dev/dvb/adapter0/ca1     // second ca device to write cw´s (recording)
#F: { 41 } /dev/sci0                 // STB04xxx slot1
#F: { 42 } /dev/sci1                 // STB04xxx slot2
#F: { 43 } /dev/tts/0                // rs232 com1
#F: { 44 } /dev/tts/1                // rs232 com2

#gbox working mode
#    00 pure Emu
#    01 pure SoftCam (when card inside), Emu (when no card inside)
#    02 pure Net Client
#    03 Mixed mode !!!!! always use this !!!!!
G: { 03 }

# Display ECM messages on Konsole
#    00 don´t show any ECM´s
#    01 show only valid ECM´s
#    02 show valid and bad ECM´s with complete data display
C: { 02 }

# Display EMM messages on Konsole
#    00 don´t show any EMM´s
#    01 show only valid EMM´s
#    02 show valid and bad EMM´s with complete data display
#    1* Log any tier change on PW-Nagra-17xx cards into /var/keys/pwupdate.log
M: { 02 }

# AutoUpdate
#    00 is ignored (default)
#    01 enable AU
#    02 Auto AU !!!!! always use this !!!!!
A: { 02 }

# Key update
#    01 update only new keys, default setting
#    02 update all keys (used for valid PMK checking)
U: { 01 }

# Hash pids
#    00 hash all pids, DO NOT USE THIS OPTION, IT IS ONLY FOR TESTING STUFF
#    01 hash only pids with implemented algos and available keys !!!!! always use this
H: { 01 }

# Key files folder
#    00 keyfiles in /var/keys
#    01 keyfiles in /var/tmp
T: { 00 }

# On Screen Display for the Multysystemcam on com1/com2
#    00 No OSD (default)
#    01 display Smartcard messages in Neutrino
#    02 display Smartcard messages in Neutrino new nhttpd format
#    03 display Smartcard messages in Enigma
O: { 03 } 192.168.1.104

# Logger and NET-mode UDP port Init
#    00 do not init UDP port
#    01 Init UDP port for IP, port, UDP
L: { 00 } 192.168.1.104 8017

# Use SSSP over rs232 port
# a0     a=1 debug on, a=0 normal operatiuon
# 0b     b=1 for com1, b=2 for com2

# Option for Seasons-Interface
W: { 00 00 } 9600

# *x ** ; x = device nummber to be used (0= default)
# D* ** ; force use of /proc/bus/gtx for cw write operations
          (in the dbox2 the gbox writes directly the CW´s, 00 is the
           recommended mode ! No drivers are required) use D* ** ONLY if
           you have Problems. 0* ** should be prefered !!!
# F* ** ; write CW´s in both devices (used for PVR in STB04xxx devices)
# ** y* ; y=0001b (0x1*) use slot1 as Multicam (only on STB04xxx)
# ** y* ; y=0010b (0x2*) use slot2 as Multicam (only on STB04xxx)
# ** y* ; y=0011b (0x3*) use slot1 and slot2 as Multicams (only on STB04xxx)
# ** *z ; z=0001b (0x*1) use com1 as Multicam
# ** *z ; z=0010b (0x*2) use com2 as Multicam
# ** *z ; z=0011b (0x*3) use com1 and com2 as Multicams
# ** yz ; yz=00110011b (0x33) use slot1+slot2+com1+com2 as Multicams
# ** *z ; z=0100b (0x*4) invert CTS detection on com1
# ** *z ; z=1000b (0x*8) invert CTS detection on com2
# example: yz = 0x0A = 00001010 (use com2 with inverted CTS detection line)
V: { F0 30 }