====================================================
Elektro Power Save for Dreambox 7025 
Version 2.0 by gutemine from 31.12.2006
!!!!! Happy New Year !!!!
====================================================
Release infos 
====================================================
1.0   first version, as usually completely 
      untested - have Fun !
1.1   now after boot the Dreambox will go 
      immediately to normal Standby
1.2   some bugfixes on Plugin Text and 
      make standby on boot configurable
2.0   make ipk kit, add info messages before standby 
      and prevent deepstandby if timer is running
====================================================
The Englis Documentation is below the German one 
====================================================

1) Voraussetzung
----------------

Jedes Image sollte funktioniere, aber bitte beachten
das die DreamboxHardware.py ersetzt wird.

Seit Euch bewusst das dies Probleme verursachen 
knnte. Die originale DreamboxHardware.py wird
jetzt aber gesichert, ein ipkg remove sollte 
also den Originalzustand wieder herstellen.

Power Save sollte mit dem Slep Timer kompatibel
sein, muss aber nicht sein !

2) Installation
---------------

Zuerst kopiert das elektro*.ipk File vom 
elektro*.zip auf /tmp mit ftp (TCP/IP muss
natrlich schon funktionieren). 

Wenn Ihr ein Image geflashed habt, das ein Blue 
Pannel hat knnt Ihr damit mit Manual Install das
ipk file installieren.

Wenn nicht, dann installiert elektro mit folgenden 
Kommandos im Telnet:

cd /
ipkg install /tmp/elektro*.ipk

Beim ipk install wird enigma auch gleich 
restarted, um das Elektro Plugin bei den 
Spielen/Erweiterungen angezeigt zu bekommen. 
Wenn es dort nicht auftaucht, 
probieren sie einen manuellen Reboot.

3) Usage
--------

Im Erweiteurngs Menu kann man die Einschlafzeit
einstellen zu der die Box in den Deepstandby 
gehen soll und die Zeit zu der Sie wieder 
aufwachen soll.

Im Moment sind nur volle Stunden dafr
untersttzt und die vorgeschlagenen 
Standardwerte sind 23h
fr den Deepstandby und 7h fr 
die Aufwachzeit.

Bitte beachten das wenn Ihr im Elektro Plugin 
das Standby beim Booten Feature aufdreht, 
dass nach dem Booten die Box in Standby geht
- kurzes Drcken des Power Knopfes auf
der Fernbedienung 2x bringt die Box dann erst
komplett online.

Das Elektro Power save plugin sollte in der 
Lage sein die Box sauber aufzuwecken wenn 
eine Aufnahme in der Schlafenszeit eingeplant 
wurde (das ist der Grund warum die 
DreamboxHardware.py gepatched wurde).

Wenn Ihr Aufnahmen whrend der Schlafenszeit 
einplant, dann vergesst nicht diese mit 
Standby nach der Aufnahme einzuplanen, 
ansonsten wird die Dreambox online bleiben.

Wenn eine Aufnahme luft whrend die 
Schlafenszeit kommt, wird das Elektro 
Plugin die Box nur in normales Standby 
schicken um die Aufnahme nicht zu stren.

Nachdem diese Aufnahme beendet wurde, wird 
kein verspteter Deepstandby stattfinden, 
ausser diese Aufnahme wurde mit Deepstandby 
nach dem Beenden eingeplant.

====================================================
Viel Spass mit dem Stromsparen und Umweltschtzen
mit dem Elektro Plugin auf der Dreambox 7025 !!!!
====================================================


1) Prerequisites
----------------

Any Image should work, but the DreamboxHardware.py 
is replaced, so be aware that this could cause 
Troubles !

But original DreamboxHardware.py is now saved, 
so ipkg remove will  bring back the original state.

Power Save should be compatible to the Sleeptimers 
available, but don't take this for sure !

2) Installation
---------------

First copy the elektro*.ipk file from elektro*.zip
to /tmp with ftp (TCP/IP must be working already). 

If you have flashed an image that offer in Blue 
Pannel Manual Addon Install you can use this 
functionality to install the ipk file.

If not, then install Elektro by entering the 
following commands in a Telnet session:

cd /
ipkg install /tmp/elektro*.ipk

The ipkg install will also restart enigma for 
you to get the Elektro Plugin shown in addons 
menu. If it doesn't show up try to reboot 
manually.

3) Usage
--------

In the addons menu of Elektro you can specifiy 
the Time at which the box should go into 
Deepstandby and the time when it should wakeup.

Currently only full hours are supported and the 
default suggested time is 23h for Deepstandby 
and 7h for wakeup.

Be aware that if you enable the Standby on 
boot feature with Elektro, that after 
wakeup/boot the box will go to Standby
- short Press of the Power Button 2x will 
get it fully awake.

The Elektro Power save should be able to 
handle that the box awakes properly if there 
is a timer planned during the Power Save Time 
(this is the reason why DreamboxHardware.py 
is patched).

When you plan Timers during the Powersave 
time don't forget to plan them with Standby 
after Recording, or Dreambox will stay online.

If there is a timers/recording running when
Sleeptime occures the Elektro Plugin will do 
a normal Standby instead of Deepstandby 
to prevent harming the recording. 

After this recording is finished NO delayed 
Deepstandby will occure, unless you have 
planned your timer with Deepstandby when 
finished.

======================================================
Have Fun to let Elektro Save Power and the 
Environment with your Dreambox 7025 !!!!
======================================================