Project Name: PIONEER NEW GENERATION 2.4
Release Date: 22.01.2007

Platform: PIONEER 14xx - 15xx - 16xx

Description: NEW GENERATION OF GRAFIC AND MORE 

Base HDL     : GENERATOR M98a
Part MHW     : FOXFOX and LARAPEPERINA for test 
Channel List : CORVONE - DUAL 


Thx To: Generator and JulekJulek 
	CLIPART  for satlist  
        CECELIFE for DOWNLOADERGB 


Developed by Brasolino Team 2006 (www.brasolino.info)

DO NOT REMOVE THIS TXT FROM PACKAGE!

----------------------------------------------------------------------------

Versione 2.4 - release date 22.01.2007

- Now you can upload your files .BIN with a SERVICE CARD 

- Insert the NEDERLAND language

- Motorlist, included in the document, with NEW GENERATION position 

- Some Bugs Fixed 


----------------------------------------------------------------------------

Versione 2.3 - release date 21.11.2006

- Insert FAST NG tuning, with CORVONE list's (from an HDL TEAM idea's
  developed for PIONIERO from FOX FOX active with PERS - 4 - 4)

- Improved the interface customer management rs232, pressing "E" key
  after the loading delle several sections returns at menu 4 without 
  confirmation.

- SID number in HEX code when key B is pressed

- Fixed Emu in 15xx e 16xx 

- the motor can be moved with the remote control, press key + C and key arrow <- | ->
  ( SATLIST in the file satelliti.txt ) 

- Now you can send T*P*S*.BIN e DCW with MediasatConnect
  the files they must be sendes singularly

- With the program MediasatConnect and RS232 port, you can send the following section

	* TCS
	* TPT
	* TSR
	* EMU
	* TPS
	* DCW
	* TSETTING

- 64 + 12 Positions BISS and CW/DW

  The positions are 76 and they can be used activating or deactivating 
  the BISS panel in EMU section.
  
- Nel menu' PERS 9 l'opzione 4 resetta il buffer DCW cioe' le 64 keys BISS & CW

- Compatibility with DOWLOADERGB of CECELIFE to send data through RS232 

-------------------------------------------------------------------------

Version 2.2 - release date 17.11.2006

- NOT COMPATIBLE WITH T*P*S*.BIN

- Fix Autoroll 


*** From GENERATOR doc *** 

- enabled "Direct Control Word" (DCW or BISS) adding
  to any channel possessing ECM-PID;

- Number of channels enabled to have this "static" feature
  is limited to 64....I for one presume it's quite enough....for the time being, at   least.
  To edit press + D 6 5 and jot down the cw0 and cw1 keys,then press OK to save   changes.That's it.

  Now every time upon switching on the desired channel,a static decrypt or BISS-key   will be loaded into descrambler.It's the only thing you'll have to do - no     further action is required!

*** End GENERATOR doc *** 


-------------------------------------------------------------------------

Version 2.1b - release date 11.11.2006

- Fix Autoroll 

- Service Card Fixed 

- Parental Control Fixed - Thx to MARCOZARDI 

- Fixed add channels 


BISS PANEL Usage with CW:

- Operations to perform:

1) Position on the desired channel
2) Press + PERS and remember the ECMPID value 
3) Press 3 Edit channel and remember the SID value
4) Activate the BISS cam + PERS 8 6
5) Transform the 2 values in HEX number
6) Go on the EMU and select BISS
7) Compile the values required. 

BISS PANEL Usage with BISS KEY 

1) Position on the desired channel
2) Press + PERS 3 Edit channel and remember the SID value 
4) Activate the BISS cam + PERS 8 6
5) Transform the values in HEX number
6) Go on the EMU and select BISS
7) Compile only SID and 00 KEY



-------------------------------------------------------------------------

Version 2.1a - release date 04.11.2006

- Fix Autoroll 

- switch off the 2nd emu pannel in biss section, 
  this fix AUTOROLL when the panel is active

- some minor bugs corrected


-------------------------------------------------------------------------

Version 2.1 - release date 27.10.2006

N E W 

- Added: menu +/Pers/6 - "ZAP30 tras" - yes/no; changes working mode for ZAP30, and stores your choice for future use.

- Menu language stored (was lost after switch off)

- Optimization on several code lines

+ pers 8 cam biss si ----> enables BISS cam
+ pers 8 cam biss no ----> enables Conax cam

- fixed parental lock storage, and channel list that was lost at switch off.

-------------------------------------------------------------------------

New Generation 2.0 - Release date 21.10.2006

- Inserted ZAP 30 function

Thanks to Photos of Ghost and T.I.S. TEAM

- BISS PANNEL

Press OK + A or B,C,D and it will return to the mask

- Volume panel modified

- Fixed AUTOSAT = ON

- Higher speed in channel change

- graphical and color improvements

- some minor bugs corrected

----------------------------------------------------------------------------



**********************************************
      ___                             _
     (  _`\                          (_ )  _
     | (_) ) _ __   _ _   ___    _    | | (_)  ___     _
     |  _ <'( '__)/'_` )/',__) /'_`\  | | | |/' _ `\ /'_`\
     | (_) )| |  ( (_| |\__, \( (_) ) | | | || ( ) |( (_) )
     (____/'(_)  `\__,_)(____/`\___/'(___)(_)(_) (_)`\___/'


      _____                              __     __     __    _____
     (_   _)                           /'__`\ /' _`\ /' _`\ (  ___)
       | |   __     _ _   ___ ___     (_)  ) )| ( ) || ( ) || (__
       | | /'__`\ /'_` )/' _ ` _ `\      /' / | | | || | | ||  _ `\
       | |(  ___/( (_| || ( ) ( ) |    /' /( )| (_) || (_) || (_) |
       (_)`\____)`\__,_)(_) (_) (_)   (_____/'`\___/'`\___/'`\___/'

