############################################################################## # incubusCamd configuration file # # All configuration options in this file observe the same format: # # = # # # # Each section are [::] like. # # # # No matter about white spaces on any place or UNIX/DOS style files # ############################################################################## ########################### general configuration ############################ [General] # Enable (1) or disable (0) background execution # 0 - Off # 1 - On background_execution=1 # This sets the level of console output for debugging: # 0 - No debug messages, 1 - First level debug messages, 2 - Second level debug messages, # 3 - Print all debug messages debug_level=3 # This option enables (1) or disables (0) the writing of debug information to the # console. log_to_console=1 # This option enables (1) or disables (0) the writing of console output to a log file log_to_file=0 # When log_to_file is set to 1, this is the path and filename to write console # ouput to. logfile_name=/var/bin/camd.log # Used to activate on-screen messages. Username and password required if # HTTP authentication is enabled on enigma. on_screen_messages_show=1 on_screen_messages_username=root on_screen_messages_password= on_screen_messages_key_update=1 on_screen_messages_wait_for_key_update=0 on_screen_messages_ecm=0 on_screen_messages_emm=0 #When activated, camd will listen on the specified port for connections. All #log activity will be broadcast in real-time to connected clients. console_logs_broadcast=1 console_logs_broadcast_port=666 ############################ caid configuration ############################## # # First of all the cam use the incubusCamd.prio file, then use the # configuration below. # Sections are defined by the value of the CaID. # You can choose the default ecm table used by the codify, this means that # you can choose the first byte of the raw ecm that is downloaded from sat. # If you don't know what value to insert, use "80". (all value are in hex) # Default value for ecm_table is 0x80. # The option "priority" tells if one caid should be selected before try # another one with a priority value greater. # The less is the value the greatest is the priority. Choose from "0" to any value, # priority value is decimal. # [CaID:0100] ecm_table=80 priority=1 [CaID:0500] ecm_table=80 priority=1 [CaID:0600] ecm_table=80 priority=1 [CaID:0919] ecm_table=80 priority=1 [CaID:093B] ecm_table=80 priority=1 [CaID:0B00] ecm_table=80 priority=1 [CaID:0D00] ecm_table=80 priority=1 [CaID:1700] ecm_table=80 priority=1 [CaID:1800] ecm_table=80 priority=1 [CaID:2600] ecm_table=80 priority=1 ########################### provider configuration ########################### # # All parameters are in hexadecimal notation. # Each section is defined by the provider id value. # If you don't know the provider id value then use the provider id "000000" and ca id "0000". # On provider 000000 caid 0000 goes all provider wich are not declared. If the provider # is declared then the cam will use the provider founded. # [Prov:000501:CaID:1833] # ---------------------------------------------------------------------------- # URL of card-server to use, formats are as follows: # # newcamd://:@:/ # aroureos://@: # radegast://@: # # Example: # newcamd://foo:bar@192.168.0.100:12345/0CE3476FF2E1C9D9A0A109B371E3 # # Multiple card-server url's can be specified for server fail-over. # If the emu fails to connect or fails to get valid CW's, it will try to # connect to other servers in a round-robin fashion. # # Up to 16 servers can be added from index 0 to 15. # # You can choose also to select a cccam or gbox server, but they must be declared # in the "servers configuration" section ( [Servers] ). # e.g. : if you want to use a cccam server for a provider you must put it on # the parameter card_server_url_0=cccam:// # NO MATTER the value after the double slash because server configuration is # made in the section [Servers]. # Only for newcamd, radegast and aroureos is usefull to put correct connection # parameters because they are provider dependent. # # # Example i want to use mine card into the slot with newcs for prov 0501 on nagra3 (caid 1833) card_server_url_0=newcamd://username:password@192.168.0.100:10550/0102030405060708091011121314 [Prov:000101:CaID:1810] # ---------------------------------------------------------------------------- # Multiple card-server url's can be specified for server fail-over. # If the emu fails to connect or fails to get valid CW's, it will try to # connect to other servers in a round-robin fashion. # # Up to 16 servers can be added from index 0 to 15. # # URL of card-server to use, formats are as follows: # # newcamd://:@://[EMM] # aroureos://@:/[EMM] # radegast://@:/[EMM] # card_server_url_0=newcamd://username:password@192.168.0.100:10550/0102030405060708091011121314/EMM card_server_url_1=newcamd://username:password@192.168.0.101:10551/0102030405060708091011121314/EMM card_server_url_2=newcamd://username:password@192.168.0.102:10552/0102030405060708091011121314/EMM [Prov:FF00] # this provider is a stand-in for all cards and all caid not declared previously # # For example I choose to use cccam protocol on all other provider. # card_server_url_0=cccam:// card_server_url_0=cccam:// lijntje 1 ########################### servers configuration ############################ [Servers] # # This is the section for the multi-server configuration. # # URL of card-server to use, formats are as follows: # # cccam://:@://[EMM] # where should assume value "yes" (without quotes, if you like to receive emus data shared by the server) or "no" (this is assumed by default) # # gbox://::@::/[EMM] # # NOTE: The "EMM" suffix is optional and tells the card-server client whether # to send EMM's to the card-server or not. Enabling or disabling this only # has effect if the card-server is configured to accept emms from this client. # # NOTE 2: The "card_server_url" is not the same as previously declared in the prov/caid section # use how many server as you like # card_server_url=cccam://:@: card_server_url=cccam://:@: card_server_url=cccam://:@: card_server_url_0=cccam://enigma2-1: lijntje 2