Ricorda che e illegale vedere pay Tv senza pagamento del abbonamento!
I Files inclusi qui possono essere usati solo per scopi di studio.
=========================================================================

14_OFM_230709_PI725a16
----------------------
Added:

- implementation SSSP  Simple Serial Sharing Protocol
implemented protocol sssp
and the corresponding software on the PC/STB (mbox, gbox, ...)
1530 enables communication with other STB
through the LAN and/or the Internet
and the decoding of the cards supported by the tuners.
Enabling sssp:
'+, menu, 6, 7' / 'DW HOST' - mark
'+, menu, 6, 8' / 'DW MODE' - select 'SSSP'
( 'HOST' -> ECM sends text - sssp is off )

- 'menu, 6' / 'CARD VALIDITY CHECK'
added information on rights for 0000 seca prov
and added information about the serial, PBM and PPUA
( Go to the following information, with the 'B' ).

- '+, menu, 6, ->, 2' / 'DEBUG TV'
added option to enable debug information
on the departure screen TV ( for developers )
to assist in the busy port COM STB.
Sample lines from the script to derive information on the screen: 
Call_Script("trace_tv", ("pmt_send_CAID: " + IntToHex(dump.CAID_HDL)));
Call_Script("trace_tv", "pmt_fta");

Thanks for D-mon, coroner-666, baobab, enter, 

julekjulek
--------------------------------------

15_OFM_100408_PI725a9
----------------------
Added:
OnLine Edition Keys EMU.
The way of the conduct:
- connect the STB from the PC the cable of COM
- turn on in the STB the connection of COM
/ 2x_MENU (on the front panel of the STB, LED CoM1)   
or '+, MENU, 6, 4'
or 'lub 2x_A, 4'
or 'E, 1, 4' /

- Start the PC the added programme MediasatConnect_v3.1.0
- pass to the tuck 'EMU Keys'
- press 'Connect'
- press 'OnLine EMU'
-- if the connection RS among STB and PC
--- he is correct, MC will read the OnLine set of keys
--- he is not correct, MC will make possible THE EMU from the file openly

- you can now edit keys in the EMU, similarly
as in the programme 'EMU Keys Editor' ( D-mon )
-- near the active connection of COM
altered keys, attributes, etc. they automatically are
actualized in STB.
-- near the switched off connection of COM,
the edition keys analogous as in the 'EMU Keys Editor'

/ you can change the order provi ( soid ) by threading the mouse
in the grounds of the list provi
- the altered order is remembered, if you write down
the EMU to the file ('Save EMU')
- the change the order provi, he is not sent OnLine to STB
( you can send whole EMU's written down to the file, the order provi
in STB will be such alone then as in the EMU file ) /

Big thanks for the D-mon.

julekjulek
--------------------------------------

=== Information for developers ===

New RS232 command for uploading of keys added.
RS232 Command format:
1.  Header (hexadecimal): 55 21 KN 
    where $55 is standard prefix,
    $21 is the command ( CMD_SEND_KEYS_ATRIB, store in basic.BUFEMU_E_HDL ),
    KN is the total number of keys
     
     Key format: 
       00 - CA System ID as defined for BUFEMU
       01...03 - 3 bytes of SOID
       04 - Key_id
       05 - length Key
       06 ... value Key

2.  Header (hexadecimal): 55 22 KN 
    where $55 is standard prefix,
    $22 is the command ( DELETE_KEYS ),
    KN is the total number of keys
     
     Key format: 
       00 - CA System ID as defined for BUFEMU
       01...03 - 3 bytes of SOID
       04 - Key_id
       05 - command ( DELETE_MODE )
            DELETE_MODE:
              0 - key of RSA_KEY
              1 - key of EMU
              2 - delete all key and provi

3.  Header (hexadecimal): 55 AB CMD 
    where $55 is standard prefix,
    $AB is the command ( SEND_BUF_EMU ),
      CMD is the command:
        0 - BUFEMU
        1 - RSA_KEYS

=========================================================================

15_OFM_090307_PI724a10
----------------------
A simultaneous public release of Deemonru's PI723a9 HDL and OFM MHW layer (OpenFirmwareMulti...)

Added new algorithms and the service of the EMU keys.
The index of keys near hand writing down 
in the comparison with files SoftCam.Key

nagra:
00 -> 06
01 -> 46
M1 -> 16
02 -> 01
M2 -> 11
3D -> 3D

crypto:
00 -> 00
01 -> 01
06 -> 02
80 -> 10
81 -> 11
B0 -> 12

Keys for BISS by MediasatConnect are taken from the format
F AABB1FFF 01 1122334455667788 ;info
( provi.txt -> F ; BISS )
You introduce by hand ident=AABB index=00 len=08 klucz=1122334455667788

Keys for constant_cw by MediasatConnect are taken from the format
W AAAA:BBBBBB:CCFF:DDDD:EEEE::11223344556677881122334455667788 ; info
( provi.txt -> W ; constant CW )
You introduce by hand ident=CCFF index=00 len=12 klucz=EEEE11223344556677881122334455667788

D-mon, julekjulek
=========================================================================

15_OFM_130107_PI723a9
----------------------
A simultaneous public release of Deemonru's PI723a9 HDL and OFM MHW layer (OpenFirmwareMulti...)

Autoupdate keys for provi 501.

A lot of thanx to humax, garus and other guys for help
with emm command $E0 for provi 0501

D-mon, julekjulek
=========================================================================

15_OFM_080107_PI723a8
----------------------

The fusion PI723a8 of the layer HDL Deemonru from MHW OpenFirmwareMulti...
Autoupdate of TPS-keys added
Read radme_D-mon.txt !!!

The proceeding near programmes STB this version OFM :
- programme STB the file 15_OFM_080107_PI723a8.bin
- turn on STB, NOT on the channel TPS
- introduce to STB sections OTV from the added file OTV.bin
	This to do to use MediaCom or MediasatConnect: 
     -> MediaCom
        - switch the box into "receive settings" mode (menu/8/3);
        - run mediacom.exe, click the button "Settings", choose the file to download into a receiver (OTV.bin);
        - select a section which contains OTV folder, click OK and wait for download to complete.
     -> MediasatConnect
        - switch the box into "receive settings" mode (menu/8/3);
        - run MediasatConnect, the tuck "Dump/Send", click "Connect"
        - click the button "Open list", choose the file to download into a receiver (OTV.bin);
        - select a section which contains OTV folder, click "Send folders" and wait for download to complete.
- to correct initiating Autoupdate, you also have to introduce the previous file TPS.bin
  (the way of the introduction, analogous as for OTV)
- switch off STB and turn on again
- switch on some channel TPS and wait about 30-40 secs
That's all.

If you want to have the service Autoupdate for different STB than 1530 from PI723a8, then you have to wait.

Notify attentions on:
http://www.sat-4-all.com/board/index.php?
http://dynamit.dvb.lv/messageboard/

Thanks for D-mon and remaining developers.
julekjulek
=========================================================================

15_OFM_070107_PI723a0
----------------------

Dodane:
Odczyt z karty serwisowej i zapis do pamieci tunera
dowolnego pliku ( tps.bin, RSA_KEYS, ... )
- wlaczenie funkcji MENU, 8, 1, 4
- plik na karcie serwisowej musi byc zapisany w trybie 'LOADER'
( czytaj readme do MediasatConnect v2.9.8 )

The correction of the change of the number provider, for the system nagra.

julekjulek
=========================================================================

17_OFM_071206_M98
----------------------

- correct the automatic adaptation MHW, for new HDL Generator.
- The updating of algorithms in the layer HDL for TPS keys autoroll
Thanks :)


julekjulek
=========================================================================

14_OFM_051206_M98 
15_OFM_051206_M98
----------------------

- correct the automatic adaptation MHW, for new HDL Generator.
- The updating of algorithms in the layer HDL for TPS keys autoroll
Thanks :)


julekjulek
=========================================================================

14_OFM_051206_M98 
15_OFM_051206_M98
----------------------

- correct the automatic adaptation MHW, for new HDL Generator.
- The updating of algorithms in the layer HDL for TPS keys autoroll
Thanks :)


julekjulek
=========================================================================

15_OFM_041206_PI723a0
15_OFM_041206_M96B
----------------------
Pubblicazione simultanea delle release D-Mon PI723a0 HDL ed OFM MHW layer (OpenFirmwareMulti...)

Se volete usufruire del servizo TPS.bin su altri modelli di STB...dovete aspettare.

Le modifiche in MHW/HDL:
- Aggiornamento degli algoritmi per le key cryptworks ed AES autoroll;
- Reso possibile l'inserimento delle key cryptoworks com la piena identificazione del Provider;
- Rimossi alcuni errori per la codifica BISS;
Le key del provider VIACCESS n 20, possono essere usate per la codifica BISS nel seguente modo:
SS ID B0 B1 B2 B4 B5 B6 dove SS ID sono il SID del provider ed il resto la key (si eliminano 
il byte 3 ed il byte 7 della key da 8 bytes).
- Rimosse circa 260 variabili superflue;
- Reso automatico l'adattamento MHW per il MENU EMU (per i Generator reset keys -> MENU/8/7);
- Con il tasto 'E', si attiva il MENU ;
- Nel MENU di servizio,  possibile muoversi con le frecce e premere OK per la scelta;
- L'HELP verr attivato con 'E', 'E'.

Hanno collaborato:
------------------
Deemonru, ldnlp, coroner-666

=== Informativa per gli sviluppatori ===
Tutte le key Cryptoworks, saranno inserite nel file MHW RSA_KEYS (per HDL PI723a0).
L'identificazione per ogni provider crypto  la seguente:
0D0XYY, per esempio 0D0020 o 0D0320
--
00 - nibble alto: CA ID come definito per bufemu = 6
     nibble basso: la seconda met byte 0x =x;
01 - key ID ( 00,01,02,10,11,12)
02 - S0ID;
03 - Lunghezza della Key;
04...KEY[3] - valore della key.
--
Per esempio 0D0320, potrebbe essere:
00 -> 63
01 -> key ID (00,01,02,10,11,12)
02 -> 20
03 -> lunghezza della key
04...key[3] - valore della key 

julekjulek
=========================================================================

15_OFM_110806_PI722a4
----------------------

A simultaneous public release of Deemonru's PI722a4 HDL and OFM MHW layer

The change in layers MHW/HDL made Deemonru.
Big Thanx :)

Limited TPS AES key autoroll added.
Encrypted AES keyshedule is stored in data flash inside the file /TPS/TPS.
According to current time MHW extracts an actual AES key and replace the old one in emu key buffer (keys 3/13 of provi 007c00).
Keyschedule itself is not updated automatically. You have to replace it manually (via rs232 port) when a new keyset is available.
To update, use programme MediaCom or MediasatConnect: 
     -> MediaCom
        - switch the box into "receive settings" mode (menu/8/3);
        - run mediacom.exe, click the button "Settings", choose the file to download into a receiver (tps.bin);
        - select a section which contains TPS folder, click OK and wait for download to complete.
     -> MediasatConnect
        - switch the box into "receive settings" mode (menu/8/3);
        - run MediasatConnect, the tuck "Dump/Send", click "Connect"
        - click the button "Open list", choose the file to download into a receiver (tps.bin);
        - select a section which contains TPS folder, click "Send folders" and wait for download to complete.
That's all.

julekjulek
===================================================================

15_OFM_100606_PI721a10
----------------------

A simultaneous public release of Deemonru's PI721a10 HDL and OFM MHW layer

The updating of algorithms in the layer HDL.
Thanks for Deemonru.

New command for RS-connection added.
PC->>tuner Signature demand -> 0x55 0x30
tuner->>PC The answer -> 0x55 0x30 0x0 (or 0x1 = Signature)
I used the new command in MediasatConnect to roll AES keys.

julekjulek
===================================================================

14_OFM_040506_PI721a8
----------------------
the test with the use HDL 1430_MX_Generator_EU_07052006.rcu

=========================================================================

15_OFM_040506_PI721a8
----------------------
Questo firm, e` stato pubblicato contemporaneamente al PI721a8 HDL di D-Mon

Aggiunto nel livello MHW:

- Menu 'RSA Keys' la possibilita` di inserire a mano le Keys Cryptoworks (per il N2 esisteva gia`), cosi come
per i sistemi S*C* e V*****SS.

Assieme alla possibilita` manuale, si possono caricare le Key anche attraverso il file 'Softcam.Key', abbiamo cosi`:

In 0D03C0 00 9EEA1 ... <- (0x10 Hex la lunghezza della Key) registrata la Key, quindi nel menu 'RSA Key' scriviamo in
- CA System - e scegliere con le frecce CRYPTO;
- ID Provider - il valore non ha importanza per il mom;
- Index - scrivere sotto 00, l'indice va posto prima della Key;
- Tipo - scrivere sotto C0, gli ultmi due caratteri da 0D03C0;
- Lunghezza - scrivere in 10 hex, la lunghezza della Key,
- Valore - scrivi il valore della key e conferma con 'OK'

- aggiunto, informazioni sul sistema Crypto in menu '+', utilizzanto il tasto 2x 'E' abilita/disabilita le
informazioni della CAM mentre si cambia canale.

- aggiunto, programmi MediaCom v2.5 e MediasatConnect v 2.3
essi rendono possibile lo scarico automatico delle Key attraverso Internet e il loro invio al decoder
attraverso il collegamento RS.
Il dettaglio dei programmi e` stato aggiunto nel readme e readme_hdl.txt.

E' beneficio di tutti, partecipare all'OpenFirmwareMulti ...
julekjulek

==============================================================================

XX_OFM_270406_1620_YYYY

E` possibile incollare MHW e font(porting)a un altro software senza fare alcuna modifica in esso;
non c'e` alcuna necessita` di una preparazione speciale.
MHW e` ora self-configurable, provato su questi modelli:
1330 1430 1530 1630 1730 DTF-1 DTF-2 PACE7 Pace13 (CP3000P)
ANOTHER -
un messaggio che vedrete nel caso di tentativo di PORTING su qualsiasi altro modello di DECODER.

ATTENZIONE!
Per il 1430 e gli altri modelli di HDL non serve il file RSA_KEYS e le n2-keys in esso:
Potete inviare n2-keys scaricati da Internet automaticamente con MediasatConnect v2.2
contrassegnando 'non RSA_KEYS' nella sezione 'EMU Keys'.

AGGIUNTO:
- Correzione della funzione 2x_MENU attraverso il pan dove si commuta la comunicazione RS in ON/OFF
(RS-communication e` quella che abilita la trasmissione delle Keys al fimware).

- le correzioni e le modifiche di lingua hanno reso.....

Here is a precise quantity of changes as compared to OFM_010406_0420 version:

PL version
----
panels - 231 change
data - 15 changes
scripts - 15 changes
---
total = 261

RUS version
---
panels - 663 changes
data - 103 changes
skrypty - 15 changes
---
total = 781

Grand total of all changes in both versions - 1042 changes
(Russian fonts included).

THANX fly out to Yaro - for his active translations of language texts 
in MHW OFM and in MediasatConnect v2.2 as well.

E' beneficio di tutti, partecipare all'OpenFirmwareMulti ...
julekjulek

========================================================
15_OFM_250306_2300_PI721a7 aggiunto:
------------------------------------

E stato pubblicato simultaneamente al PI721a7 HDL di Deemonru.

1.N*gra2, estato aggiunto un "emm-processing" limitato.
Avete bisogno di caricare l'EMM di rsa e idea per ottenere l'AU.

2. Aggiunto anche Il menu MHW per la rsa KEY.

La pagina per l'inserimento della "rsa key" si ottiene con questa sequenza: PERS/7 e premere " - > "o" <-".
immettete i 6 caratteri dell'ident provider es.(007101). Se la Key esiste gia, la potrete vedere nel campo sottostante.
- premere OK per editare o rimuovere la KEY,
- premere OK quando avete finito, per salvare il nuovo valore oppure il tasto SERV per cancellarlo.

Suggerimento:
L'AU per N2 funzionera solo se si inserira la key esatta con MEDIACOM o dalla opz. di Menu/7/"rsa key".
Es. per 7101 si devono aggiungere i dati con questi parametri:
RSA_EMM, 'key index' -12, 'key Type'-10, 'key len' -60;
IDEA_EMM, 'key index'-02, 'key type'-18, 'key len' -10
L'AU trovera la nuova IDEA KEYs per voi.

per ottenere la visione, avrete bisogno anche di inserire:
RSA - 'Key index'-16, 'key tipe'-00, 'key lenght'-40.

Le modifiche in HDL e le modifiche principali in MHW sono state realizzate da Deemonru

E' beneficio di tutti, partecipare all'OpenFirmwareMulti ...
julekjulek

=====================================================
DTF2_OFM_230306_0000_matrix:
----------------------------

Added - the automatic service of keys for nagra2 
Improved - initiating buffer EMU 
Improved - projection information about key 
in +,MENU and and function started 2x_E 

Parameters what one should introduce in programme 
MediaBox (Mediacom) Deemonru near data input 
RSA_EMM and IDEA_EMM needed to automatic work 
{ in some files from data accessible on upload's 
RSA_EMM has name MOD, IDEA_EMM has name KEY)
------ 
Parameters for 7001:
'Ident' -7001
RSA_EMM-  'key index'-11, 'key type'-10, 'key len'-60
IDEA_EMM- 'key index'-01, 'key type'-18, 'key len'-18
RSA_EMM-  'key index'-12, 'key type'-10, 'key len'-60
IDEA_EMM- 'key index'-02, 'key type'-18, 'key len'-18

Parameters for 7101:
'Ident' -7101
RSA_EMM-  'key index'-11, 'key type'-10, 'key len'-60
IDEA_EMM- 'key index'-01, 'key type'-18, 'key len'-18
RSA_EMM-  'key index'-12, 'key type'-10, 'key len'-60
IDEA_EMM- 'key index'-02, 'key type'-18, 'key len'-18
==========
Parameters for 4001:
'Ident' -4001
RSA_EMM-  'key index'-11, 'key type'-10, 'key len'-60
IDEA_EMM- 'key index'-01, 'key type'-18, 'key len'-18
RSA_EMM-  'key index'-12, 'key type'-10, 'key len'-60
IDEA_EMM- 'key index'-02, 'key type'-18, 'key len'-18

Parameters for 4101:
'Ident' -4101
RSA_EMM-  'key index'-11, 'key type'-10, 'key len'-60
IDEA_EMM- 'key index'-01, 'key type'-18, 'key len'-18
RSA_EMM-  'key index'-12, 'key type'-10, 'key len'-60
IDEA_EMM- 'key index'-02, 'key type'-18, 'key len'-18
-------
ATTENTION: IDEA_EMM in informative files be passed 
about length 16 bytes. It near it was introducing
in MediaBox one one should to add 8 bytes
( to write 16 zero on end of key).

On the behalf of all participating in the OpenFirmwareMulti...
julekjulek

=======================================================================

DTF2_OFM_180306_0000 Fixed:
---------------------------
Fixed bug's in HDL, now is possible added IDEA key's for Nagra2
 with Mediacom Deemonrou or in Box menu.
- inserted key to EMU, activate him and cancelled key saved in RSA_KEYS.

IDEA 86 (16 byte's) insert in menu as 0 i 1 (8+8 byte's)
IDEA 96 (16 byte's) insert in menu as 2 i 3 opk (8+8 byte's)

If you want activated IDEA key, who is in RSA_KEYS, you must deleted equivalent in EMU.

Thanks for HDL author.
julekjulek

=====================================================================
OFM_160306_2200 aggiunto:
-----------------------
- Per i modelli DTF2 e 1530 with hdl PI721a6
Supportano RSA e idea Key per niagra2 con collegamento RS usando il Mediacom di D-Mon.
- Per gli altri modelli, senza il supporto RSA/IDEA atraverso RS, aggiornare le key come prima.

--- HELP per aggiungere le RSA/IDEA key in caso e.q. 7101

- Fate partire Mediacom, col DEC collegato al PC attraverso il cavo seriale,
- Aprite la connessione nel Dec attraverso il 'Menu di Servizio' -> 6/ CAM&COM -> 4/RS232 contrassegnato,
- Klikkate su 'OPEN' Mediacom si connettera col DEC,
- Klikkate su "Emu Key";
- in 'CA System' marcate su "niagra"

Aggiornamento della RSA Key:

- 'Ident'-007101, 'key index'-16, 'key type'-00, 'key lenght'-40
- nell'apposito box, mettete i 64 byte della RSA,
- klikkate su '>>'

Aggiornamento della IDEA Key:

>per la IDEA 88<
- 'Ident'-007101, 'key index'-06, 'key type'-0D, 'key lenght'-10,
- nell'apposito box, scrivete i 16 byte della IKey 00,
- klikkate su '>>'

>per la IDEA 96<
- 'Ident'-007101, 'key index'-46, 'key type'-0D, 'key lenght'-10,
- nell'apposito box, scrivete i 16 byte della IKey 01,
- klikkate su '>>'

In questo modo avete preparato le giuste istruzioni, pronte per essere spedite al vostro DEC.
Ora che tutto e pronto, klikkate su 'Send Keys' ...........i dati verranno trasferiti dal PC al DEC.
Se tutto e filato liscio, avrete il seguente messaggio:
"3 new keys received
Key #6 for provi 7101 inserted.
Key #46 for provi 7101 inserted.
Key #16 for provi 7101 inserted.
entree dans init_proctab
sortie de init_proctab
Key #aa for provi 0 updated."

MHW aggiunte/cambi:
----------------------
- Fixato il buffer ed il file delle RSA Keys
(ora non si dovrebbe avere il problema tipo 'No room for new keys!')

- Menu/8/6 pulisce il buffer RSA
(ATTENZIONE! - questo cancella sia la RSA che le IKeys senza alcuna conferma)
Quest'opzione si deve usare nel caso di Buffer pieno o cattiva inizializzazione del firm precedente.

- Spegnere o accendere l'orologio/datario sullo schermo col tasto 'SERV' quando l'orologio e attivo.
Il settaggio, non e permanente allo spegnimento del Dec. Per default e in modalita trasparente.

- Fixato il blocco del menu servizio e della barra info quando l'orologio e attivo.

- Klikkare 2 volte il tasto PILOT per cambiare lo standard epg MHW<->DVB sul canale corrente.


Partecipate allo sviluppo dell OFM
julekjulek

================================================================================================

15_OFM_120306_1500_PI721a6 aggiunto:
-----------------------
- Aggiornamento dal Deemonru HDL PI721a6, per favore leggete il readme_HDL

-- Descrizione delle funzioni aggiunte --

Lanciate il "Mediacom", klikkate su "Open" ed il programma dovrebbe stabilire
un collegamento con il DEC.
Klikkate su "EMU Key" quindi in "CA System" selezionate il campo "niagra"

Esempio di aggiunta delle key base di POLSAT.

Avremo bisogno delle chiavi "IDEA/3DES" e "RSA mod".

Scrittura della chiave RSA:

Riempite i seguenti campi: Ident-7101, key index-16, key type-00,
Incollate la chiave RSA lenght-40 nella finestra sotto e premere ">>".
Nella finestra adiacente dovreste essere in grado di vedere
"3F 007101 16 00 40 xxxx ", dove xxxx ... e la vostra Key RSA.

Aggiungiamo ora la key IDEA/3DES:

Poi ancora: Ident-7101, key index-06, key type-0D, Incollate la Key IDEA/3DES lenght-10 nella finestra sotto e premere bottone ">>" ancora una volta. Alla fine, col bottone "Send Key" inviate il tutto al vostro DEC.
-----------
MHW:

- Ora, data e numero di canale sono stati spostati nell'angolo inferiore sinistro
- Aggiunta la possibilita di ottenere gli ultimi sottotitoli e nella lingua mpostata
per ogni canale separatamente sotto il menu '+'

con la sequenza di tasti menu/4/1/4 "REMEMBER LAST":
a) NESSUNO
b) LINGUA
c) SOTTOTITOLI
d) ENTRAMBI

L'MHW e preparato per l'utilizzo con altri modelli di DEC
(solo lo "sharing speedup" non puo funzionare perche e una funzione specifica di questo HDL)

Le modifiche MHW sono di: Deemonru e Maybe.

Il beneficio di tutti e partecipe nell'OpenFirmwareMulti ...
julekjulek

======================================================================
OFM_201105_0132_PI721a3 Aggiunto:
-----------------------
+, MENU, 5, freccia su/giu, 2 'NAME SATELITES'
per editare i nomi dei satelliti in relazione a DiSEqC
+, MENU, 5, freccia su/giu, 3 'MY COLOURS ...'
pieno controllo degli elementi RGB e transparenza
per palette colori a scelta dell'utente
(puoi usare i colori che vuoi per il FW)
+, MENU, 5, 7 'AUTO LOCAL TIME'
per settare per quale fuso orario e ora solare/legale
ci sara la sincronizzazione automatica (Nazione)
PL, GB, IT, FR, NL, ES or '*'
(Se si setta '*' solo l'orario sara sincronizzato, non il cambio d'ora legale).
+, MENU, 6, freccia su/giu, 0 'RS232 speed'
per cambiare la velocita della RS232
2x 'C' (su schermo 'normale') ricerchera
canali secondo la prima lettera del nome
(non distingue lettere maiuscole/minuscole)

Altre proprieta:
-----------------
- auto configurazione MHW per diversi modelli STB
(un firmware (MHW layer) per tutti i modelli STB)
- SETTINGS controllo del formato dei file durante la sequenza di boot.
Il FW scrivera dei SETTINGS default se qualcosa e andato storto,
cosicche non bisogna cancellare la Flash prima di scrivere l'OFM.
- possibilita di SCANSIONE di un satellite senza card inserite
- 'SERVICE MODE K2002' (MENU, 4, 4) e stato spostato a
MENU 8 - 'SERVICE OPTIONS' (MENU, 8, 5)
(posto piu indicato)
- miglior ordine nella sezione d'installazione
- risolto un grosso bug in relazione alla cancellazione canali
rovinava i canali presenti sul transponder del canale cancellato

A nome di tutti i partecipanti nell'OpenFirmwareMulti...
julekjulek

======================================================================

OpenFirmwareMulti... (OFM)
--------------------------
Questo software e il successore di un OpenFirmware di qualche tempo fa.
Principali caratteristiche:
-ottimizzazione in favore delle dimensioni, velocita e stabilita
-supporti per 5 lingue
(malgrado supporti 5 lingue e tenga lo strato con le caratteristiche di base del precursore MHW e il 16% piu piccolo.
-fusi una parte di MHV e DVB servizi pilota dentro un unico pezzo (pne=one=uno)
-possibilta di cambiare posizione del menu principale e quello di servizio sullo schermo

Principali lavori che hanno contribuito a questa versione di FW sono:

- julekjulek,colui che ha cambiato il MHW layer
- eran,colui che ha cambiato i caratteri e la grafica

Hanno cooperato:
----------------
- l'ottimizzazione della sezione base e stata fatta su una base MHW per DFT1 fatta da Yawan
- Blackside, ha cambiato i sottotitoli
- BlackSide, -=Mario=-, per la condivisione del codice sorgente usato in MediasatConnect

Versioni:
---------
OFM e pubblicato come un "open firmware". Ognuno, se ne ha le conoscenze, puo fare delle modifiche e pubblicare la nuova versione.
Ci sono 2 condizioni:
1. Le modificazioni introdotte dovrebbero essere di cambio nella funzionalita (e non nella bellezza estetica)
2. la pubblicazione deve contenere il file originale leggimi con in piu le descrizioni della nuove funzionalita

Nominando il progetto : modello_OFM_data_orario_versioneHDL.bin
ad esempio: 15_OFM_161005_0300_PI721a1.bin

==========
IMPORTANTE
==========
Prima di scaricare il firmware in STB (decoder)
-----------------------------------------------
A causa di un importante cambiamento nel Setting file (settaggio del STB decoder) e le informazioni circa 4 satelliti in eeprom tu devi
-cancellare la lista canali nella flash
-scaricare OFM FW
-scaricare anche la eeprom inclusa
-Accendere il decoder (STB) e programmare qualche canale da satellite
Dopo questo piccolo accorgimento puoi scrivere la tua lista canali attraverso la porta seriale (RS).
----
La sigla "JC2" che appare sul LED display dopo lo spegnimento del decoder da telecomando significa che tu hai usato una EEprom sbagliata
La mancanza del MENU visibile All'accensione del decoder cignifica che la vecchia lista canali e rimasta nella Flash.
================================================== ================================================== =================

Grazie :)

Grazie a chiunque ha contribuito allo sviluppo non solo del decoder (STB) ma anche al quello di programmki come "Defiant", "Pioniero", "uComp", "Mediasat Editor Studio", "Downloader" etc.

Ringraziamenti vanno a :
PJotr, BlackSide, Deemonru, Dynamit, sa1vador, pio, PJotr, STUDI, Johann,

Scuse e grazie a chi ha sviluppato in qualche modo l'OpenFirmware ma non e stato mensionato.

(Questo software, come ogni software non e esente da imperfezioni)

A nome di tutti i partecipanti nell'OpenFirmwareMulti...
julekjulek
================================================== =======================

Veloce descrizione delle funzioni:
===============================
I tasti lavorano con il video pulito:
--------------------------------------------------------------
'A' - veloce esecuzione di sullo schermo di 'CAsystem ECMPID ProviderID'
2x'A' - veloce esecuzione della configurazione di RS configuration screen
'B' - Radio
2x'B' - allora 'freccia su / freccia giu - passaggio automatico sul canale successivo o precedente nella lista canali
(l'attivita e indicata dal LED acceso, premendo qualunque tasto l'attivita verra interrotta)
'C' - esecuzione della gestione dei sottotitoli
'D' - pausa
'E' - zapping tra le liste oppure EPG (dipende da come e stato settato il service manu)
2x'E' - abilita o disabilita le informazioni della CAM mentre passi da un canale al altro

POWER - Decoder acceso o spento
2x'POWER' - Decoder non possibile al restart
'SERW' - Interattivita (ma dipende dal HDL usato),
'PILOT' - pilota tra MHW/DVB
'PROG' - zapping tra le liste oppure EPG (dipende da come e stato settato il service manu)
'OK' - passa tra l'ultimo ed il penultimo canale visualizzato
'+' Mostra le informazioni base ed i parametri del canale in uso
'+', 'MENU' - menu di servizio
'0' - mostra o nasconde le informazioni date dall'orologio
2x'0' - mostra in modo permanente il display dell'ora
3x'0' - cambia la tipologia del display dell'ora
LED, TV, LED&TV, TV&DATA, LED&TV&DATA
-----------------------------------------------------------------------
Quando la lista canali o il Pilot sono attivi:
------------------
a - Tutte
b - Lista 1
c - Lista 2
d - Lista 3
-----------------------------------------------------------------------
Sottotitoli:
------------------
Tasti addizionali vicini alla riproduzione nella iscrizione della sintonia
Additional keys near reproduction from tuner inscriptions:
A - reward 5 text
B - reward 1 text
D - forward 1 text
E - forward 5 text
------------------------------------------------------------------------
Descrizione di alcune posizioni del menu:
-----------------
'+', 'PILOT' - motore, sposta il motore con precisione a sinistra
'+', 'PROG' - motor, sposta il motore con precisione a destra
'+', 'A' - permette di programmare l'autospegnimento
----------------
'+', 'MENU', '3', '5' (status), freccia su o giu (status2), '0' - channel, selezionare per fare sharing
( nulla se (*) il canale e trattato dalEMU oppure dalla SecaCard, invece si ha (V) se il canale e trattato attraverso lo sharing)
'+', 'MENU', '6', '7' (DW HOST) - permette lo sharing attraverso la porta RS
(il settaggio viene salvato attraverso lo spegnimento e l'accensione da telecomando, automaticamente avviene l'apertura della porta RS e lo sharing per i canali selezionati)
'+', 'MENU', '7', '8' (motor) - menu per il controllo motore
'+', 'MENU', '4', '7' (motor) - settaggio delle posizioni del motore nella lista canali
'+', 'MENU', '5', '0' - guarda attraverso il munu
'+', 'MENU', '5', '1' ( <-, ->) - cambia i colori del firmware
'+', 'MENU', '5', '2' - aggiusta l'orologio
(LED, TV, LED&TV, TV&DATA, LED&TV&DATA)
'+', 'MENU', '5', '3' - E = Zaplist/EPG
'+', 'MENU', '5', '4' - informazioni del canale e della CAM
'+', 'MENU', '5', '5' - mini pilot mentre cambi i canali
'+', 'MENU', '5', '6' - informazioni del provider mentre cambi canali
'+', 'MENU', '5', arrow down/up, 0, arrows - cambia la posizione del menu
'+', 'MENU', '5', arrow down/up, 1, permette o impedisce il blocco sul canale
'+', 'MENU', '7', '0' - permette o impedisce l'AUTO PID per SECA,
'+', 'MENU', '7', '1' - aggiornamneto del MHW da satellite
'+', 'MENU', '7', '3' - EMM EMU = no (*) , yes (V), new (+)
'+', 'MENU', '7', '4' - EMM INFO = no (*) , yes (V), informazioni circa le nuove chiavi dall'EMU
'+', 'MENU', '7', '5' - EMM SECA 2, EMM passing = no (*), UA/SA, SA
(per i 1530 and Deemonru HDL il blocker e presente,
per altri modelli no (*) = MHW permesso blocker,
Dopo un eventuale ricaricamento di un nuovo firmware o eeprom devi dinuovo stabilire questa opzione)
'MENU', '4', '4' - inizia con dL1o cioe in modalita servizio per i 1530 con Deemonru HDL
(per gli altri modelli questa funzionalita dipende da quale HDL e usata)
'MENU', 'D' - Cambio di lingua