Ga naar inhoud


wolsos

Lid
 Bekijk profiel  Bekijk hun activiteit

  • Items

    21

  • Registratiedatum

  • Laatst bezocht

 Inhoudstype 

Berichten die geplaatst zijn door wolsos

    VU+ Ultimo 4K USALS Motor - Geen beweging

    in Schotelpark

    Geplaatst:

    Beste allemaal,

     

    Vandaag de tijd gevonden om me stacker / destacker er tussen uit te halen. En het werkt! Ook het omdraaien van de tuner werkte niet. Kennelijk zit zo'n stacker / destacker het draaien van de schotel in de weg.

    De meeste belangrijke heb ik boven de 80%, maar niet alle satellieten. Niet zo belangrijk voor nu.

    Nu kijken of ik de paal nog moet fixeren. Wil ik eerst de impact van een storm zien.

     

    Dank jullie allemaal voor de input, ik heb het door jullie kunnen oplossen!

    VU+ Ultimo 4K USALS Motor - Geen beweging

    in Schotelpark

    Geplaatst:

    Dank voor de tip. Ik kan die instelling herinneren, maar niet meer vinden in de VTI 14.0.6. Tuner B niet geconfigureerd zetten, geeft draaing van statelliet weer, maar niets gebeurd.

    Ik zit nu te denken ik heb een Stacker / Destacker ertussen zitten, zou dit het satelliet-draaien in de wegzitten?

     

    Van de week maar deze er tussenuit halen en kijken of het dan werkt.

     

    Zijn er configuraties met Stacker / Destacker met USALS motor? Diseqc 1.2 zou moeten werken, en heeft gewerkt.

    VU+ Ultimo 4K USALS Motor - Geen beweging

    in Schotelpark

    Geplaatst:

    Ik heb een VU+ Ultimo4K VTI 14.0.6 setup. Abonnement op BIS (Frankrijk), Joyne, CanalDigitaal.

    Overgegaan naar een schotel met motor (AMIKO DM3800 DISEQC ROTOR)

    Ik kan met de hand (op de rotor zelf draaien), maar ingesteld als USALS Rotor, maar er draait niets met veranderen satelliet. Hij blijft staan op Thorn, wat er ook gebeurd.

    Iemand enig idee? De vorige keer, ergens in 2007, was het binnen een uurtje gepiept. Uitrichten en werken. Nu gebeurd er niets.

    Probleem met schotel africhten

    in Vu Plus

    Geplaatst:

    Ondertussen de 5 afzonderlijk aan de praat, connectie naar switch is correct, maar ik krijg hem bijvoorbeeld niet op Astra3 geschakeld. Dus als ik de configuratie heb voor de Diseqc 1.1 8/1 moet ik in business zijn en kan ik nog een beetje carnaval gaan vieren.

     

    Dus nu de vraag: wat is een goede configuratie voor  Atemio EMP DiSeqC Switch 8/1.

    Probleem met schotel africhten

    in Vu Plus

    Geplaatst:

    Welke 8 satellieten wil je ontvangen en in welke regio staat je schotel?

    Hoi,

     

    Dat is HotBird, Astra1, Astra3, Astra2 en Eutelsat 5W andere 3 zijn niet zo belangrijk.Voor de andere 3 heb ik op dit moment bedacht: Eutelsat 33A, Astra4 en Thor5. Alternatieven voor de laatse 3 zijn welkom.

    Maar eerst de eerste 5 aan de praat krijgen.

    Ga vandaag de aanbevelingen opvolgen. Dank jullie wel, allemaal!

    Probleem met schotel africhten

    in Vu Plus

    Geplaatst:

    Beste allemaal,

     

    Was ik er maar nooit aan begonnen. Ik had een werkende solo2 met 4 satellieten, wilde naar 8 en zit nu in de ellende. Voor de 8 satellieten moet ik de 0 afstellen op Hotbird. Ik heb of een op en neer bewegende SNR van 0 tot 85, of ik kom niet hoger dan 58. Wat ik ook doe, het lukt me niet. 

     

    Ook als ik geen kabel heb aangesloten gaat de SNR van 0 tot 85. Klopt dat?

     

    De vorige keer had ik het binnen no-time gedaan.

     

    Iemand enig idee?

     

    Ik heb me stekkertjes opnieuw gedaan.

     

    Ik heb dus 8 LNBs met een Atemio EMP DiSeqC Switch 8/1.

     

    Me Elevation moet 29.84 zijn, me Azimuth, 169.01, Tilt -6,8.

     

    Commen Interface Channel/Provder Assigment

    in Vu Plus

    Geplaatst:

    Beste alle maal,

     

    Ik ben vandaag aan de slag gegaan met me nieuwe Solo2. Ziet er echt goed uit en eenvoudig in opzet wat betreft de configuratie.

     

    Ik heb in de Common Interface een VIACCESS voor BIS TV. Werkt goed, maar ik wil eigenlijk exact de zenders of provider toewijzen. Iemand enig idee hoe je dat direct op de box zelf kunt doen, dus niet via het menu? Deze is namelijk niet echt stabiel voor deze functionaliteit.

     

    Groetjes, Oskar

    Wat aan te schaffen een Dreambox 7020HD of VU+ Solo2

    in Vu Plus

    Geplaatst:

    Dank voor jullie reacties. Ik heb net de VU+ Solo2 besteld. Ik ben benieuwd. Voor BIS tv ga ik de CI-module gebruiken en voor Canal Digitaal de ingebouwde kaartlezer. Als softcam ga ik Oscam gebruiken, heb ik goede ervaringen mee.

     

    Hoop niet dat de CI Module niet te veel problemen geeft. Ik denk dat ik de images in deze volgorde ga proberen: VTI, OpenPli (Zelf goede ervaring met Dreambox), Blackhole en OpenATV.

    Wat aan te schaffen een Dreambox 7020HD of VU+ Solo2

    in Vu Plus

    Geplaatst: · aangepast door wolsos

    Beste allemaal,

     

    Ik heb op dit moment een Dreambox 800SE HD en ben daar best tevreden mee. Heb alleen altijd oorlog met de Franse zenders. Op dit moment heb ik een BIS tv smart card (VIACCCESS 3.1) en deze werkt wel, maar wil niet updaten. Dus eigenlijk moet ik dan een CI Module gebruiken, die ik heb liggen btw.

    Op de dreambox gebruik ik OSCAM, waar ik best wel veel mee kan, alleen het updaten van de BIS TV smart card lukt niet.

     

    Dus als ik moet kiezen tussen de traditionele keus: Dreambox of een VU+, wat moet ik kiezen en waarom.

     

    Als ik Dreambox kies, zou ik voor de 7020HDv2 gaan en voor VU+ de Solo2 (lijkt me).

     

    Gaarne jullie advies en wanneer de Solo2, welke image is dan de beste?

     

    Alvast bedankt voor het advies. Ik ben benieuwd!

     

    Met vriendelijke groet, Oskar

    oscam pakt vaak niet local

    in CI, CI+, (soft)cams en smartcards

    Geplaatst:

    ik heb nu een paar weken oscam draaien, maar heb regelmatig dat zenders die ik op mijn lokale card heb dan toch via een andere reader worden gelezen en niet via mijn eigen lokale card. Ik had services in gebruik, maar omdat loadbalancing aan staat heb ik die uitgezet.

     

    ik heb preferlocalcards op 1 staan, maar toch gaat ie dan zoeken en doet de zender het dus af en toe niet of hij stopt enkele seconden.

    Mijn oscam.conf

    [global]

    logfile = /dev/null

    failbantime = 5

    nice = -1

    preferlocalcards = 1

    saveinithistory = 1

    lb_mode = 1

    lb_save = 150

    lb_nbest_readers = 2

    lb_savepath =

     

    [dvbapi]

    enabled = 1

    au = 1

    boxtype = dreambox

    user = dvbapiau

     

    Oscam.server

    [reader]

    label = onder

    description = internalreader

    protocol = internal

    device = /dev/sci0

    caid = 0100

    detect = cd

    mhz = 300

    cardmhz = 500

    ident = 0100:000000,00006A

    group = 1

    emmcache = 1,1,15

    ratelimitecm = 4

    ratelimitseconds = 10

    Voor locale kaard moet preferlocalcards op 2 staan, zie uitleg op:

     

    http://www.streamboard.tv/wiki/OSCam/en/Config/oscam.conf#preferlocalcards

     

    preferlocalcards
    HakenGruen.png parameter is optional

    CHANGE 01-10-2014 no changeset!

    try decoding on local cards first

    Example:

    preferlocalcards = 0 # local cards are used like remote reader

    preferlocalcards = 1 # prefer CacheEx sources

    preferlocalcards = 2 # prefer local cards

    Default:

    preferlocalcards = 1 # prefer CacheEx sources

    BIS TV kaart werkt niet in Dreambox

    in CI, CI+, (soft)cams en smartcards

    Geplaatst:

    Nu weer wel, met deze configuratie:

    oscam.user

    -------------------------------------------------------------------------------------------------------------------------

    [reader]

    label = bis_tv

    enable = 1

    protocol = internal

    device = /dev/sci0

    caid = 0500

    detect = cd

    ident = 0500:042820

    group = 1

    emmcache = 1,3,15

    lb_weight = 600

    auprovid = 042820

    dropbadcws = 1

    -------------------------------------------------------------------------------------------------------------------------

    log:

    -------------------------------------------------------------------------------------------------------------------------

    -------------------------------------------------------------------------------

    >> OSCam <<  cardserver started at Tue Jan 14 22:04:15 2014

    -------------------------------------------------------------------------------

    2014/01/14 22:04:15        0 s >> OSCam <<  cardserver started, version 1.20-unstable_svn, build r9330 (mipsel-unknown-linux-gnu)

    2014/01/14 22:04:15        0 s creating pidfile /tmp/.oscam/oscam.pid with pid 11993

    2014/01/14 22:04:15        0 s services reloaded: 0 services freed, 0 services loaded, rejected 0

    2014/01/14 22:04:15        0 s signal handling initialized

    2014/01/14 22:04:15        0 s monitor: initialized (fd=7, port=700)

    2014/01/14 22:04:15        0 s bis_tv [internal] creating thread for device /dev/sci0

    2014/01/14 22:04:15        0 s Canal_Digitaal_NL [internal] creating thread for device /dev/sci1

    2014/01/14 22:04:15 775004F8 r bis_tv [internal] Reader initialized (device=/dev/sci0, detect=cd, mhz=357, cardmhz=357)

    2014/01/14 22:04:15 77502310 r Canal_Digitaal_NL [internal] Reader initialized (device=/dev/sci1, detect=cd, pll max=27.00 MHz, wanted mhz=5.40 MHz

    2014/01/14 22:04:15   A236E0 h webif: decompressed 64662 bytes back into 186312 bytes

    2014/01/14 22:04:15   A236E0 h HTTP Server running. ip=0.0.0.0 port=14200

    2014/01/14 22:04:16        0 s waiting for local card init

    2014/01/14 22:04:16 775004F8 r bis_tv [internal] card detected

    2014/01/14 22:04:16 77502310 r Canal_Digitaal_NL [internal] card detected

    2014/01/14 22:04:18 775004F8 r bis_tv [internal] ATR: 3F 77 18 00 00 C2 EB 41 02 6C 90 00 

    2014/01/14 22:04:18 775004F8 r bis_tv [internal] Init card protocol T0, FI=1, F=372, D=12, N=0

    2014/01/14 22:04:18 775004F8 r bis_tv [internal] Calculated work ETU is 6.20 us reader mhz = 500

    2014/01/14 22:04:18 775004F8 r bis_tv [internal] ATR Fsmax is 5 MHz, clocking card to 5.00 (specified in reader->mhz)

    2014/01/14 22:04:18 77502310 r Canal_Digitaal_NL [internal] ATR: 3B F7 11 00 01 40 96 70 70 0A 0E 6C B6 D6 

    2014/01/14 22:04:18 77502310 r Canal_Digitaal_NL [internal] Init card protocol T0, FI=1, F=372, D=1, N=1

    2014/01/14 22:04:18 77502310 r Canal_Digitaal_NL [internal]  TEST tempo mhz check = 540 mhz

    2014/01/14 22:04:18 77502310 r Canal_Digitaal_NL [internal] Calculated work ETU is 68.89 us reader mhz = 540

    2014/01/14 22:04:18 77502310 r Canal_Digitaal_NL [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 5.40 Mhz (nearest possible mhz specified reader->cardmhz)

    2014/01/14 22:04:19 77502310 r Canal_Digitaal_NL [internal] type: SECA, caid: 0100, serial: #########, card: Mediaguard v10.0

    2014/01/14 22:04:19 77502310 r Canal_Digitaal_NL [internal] Request provider 1

    2014/01/14 22:04:19 77502310 r Canal_Digitaal_NL [internal] provider 1: 0000, valid: 1, name: MANAGMENT, expiry date: 2014/03/12

    2014/01/14 22:04:19 77502310 r Canal_Digitaal_NL [internal] SA: ########

    2014/01/14 22:04:19 77502310 r Canal_Digitaal_NL [internal] PBM for provider 1: 799008001c000

    2014/01/14 22:04:19 77502310 r Canal_Digitaal_NL [internal] Request provider 2

    2014/01/14 22:04:19 77502310 r Canal_Digitaal_NL [internal] Detected seca3 card

    2014/01/14 22:04:19 77502310 r Canal_Digitaal_NL [internal] provider 2: 006A, valid: 1, name: CANALDIGITAAL, expiry date: 2014/03/08

    2014/01/14 22:04:19 77502310 r Canal_Digitaal_NL [internal] SA: ########

    2014/01/14 22:04:19 77502310 r Canal_Digitaal_NL [internal] PBM for provider 2: fc00000000000000

    2014/01/14 22:04:19 77502310 r Canal_Digitaal_NL [internal] providers: 2 (0000,006A)

    2014/01/14 22:04:19 77502310 r Canal_Digitaal_NL [internal] parental locked

    2014/01/14 22:04:19 77502310 r Canal_Digitaal_NL [internal] ready for requests

    2014/01/14 22:04:19 77502310 r Canal_Digitaal_NL [internal] found card system seca

    2014/01/14 22:04:19 77502310 r Canal_Digitaal_NL [seca] THIS WAS A SUCCESFULL START ATTEMPT No  1 out of max alloted of 1

    2014/01/14 22:04:19 77502310 r Canal_Digitaal_NL [seca] Request provider 1

    2014/01/14 22:04:19 77502310 r Canal_Digitaal_NL [seca] provider 1: 0000, valid: 1, name: MANAGMENT, expiry date: 2014/03/12

    2014/01/14 22:04:19 77502310 r Canal_Digitaal_NL [seca] SA: ########

    2014/01/14 22:04:19 77502310 r Canal_Digitaal_NL [seca] PBM for provider 1: 799008001c000

    2014/01/14 22:04:19 77502310 r Canal_Digitaal_NL [seca] Request provider 2

    2014/01/14 22:04:19 77502310 r Canal_Digitaal_NL [seca] Detected seca3 card

    2014/01/14 22:04:19 77502310 r Canal_Digitaal_NL [seca] provider 2: 006A, valid: 1, name: CANALDIGITAAL, expiry date: 2014/03/08

    2014/01/14 22:04:19 77502310 r Canal_Digitaal_NL [seca] SA: ########

    2014/01/14 22:04:19 77502310 r Canal_Digitaal_NL [seca] PBM for provider 2: fc00000000000000

    2014/01/14 22:04:20 775004F8 r bis_tv [internal] card system not supported

    2014/01/14 22:04:20 775004F8 r bis_tv [internal] Normal mode failed, reverting to Deprecated Mode

    2014/01/14 22:04:21 775004F8 r bis_tv [internal] ATR: 3F 77 18 00 00 C2 EB 41 02 6C 90 00 

    2014/01/14 22:04:21 775004F8 r bis_tv [internal] Warning: D=0 is invalid, forcing D=1

    2014/01/14 22:04:21 775004F8 r bis_tv [internal] Init card protocol T0, FI=1, F=372, D=1, N=0

    2014/01/14 22:04:21 775004F8 r bis_tv [internal] Calculated work ETU is 74.40 us reader mhz = 500

    2014/01/14 22:04:21 775004F8 r bis_tv [internal] ATR Fsmax is 5 MHz, clocking card to 5.00 (specified in reader->mhz)

    2014/01/14 22:04:23 775004F8 r bis_tv [internal] using ecm #70e for long viaccess ecm

    2014/01/14 22:04:23 775004F8 r bis_tv [internal] type: Viaccess (non-standard atr), caid: 0500, serial: ##########

    2014/01/14 22:04:24 775004F8 r bis_tv [internal] providers: 3 (FFF400,042820,042830)

    2014/01/14 22:04:24 775004F8 r bis_tv [internal] ready for requests

    2014/01/14 22:04:24 775004F8 r bis_tv [internal] found card system viaccess

    2014/01/14 22:04:24 775004F8 r bis_tv [viaccess] THIS WAS A SUCCESFULL START ATTEMPT No  1 out of max alloted of 1

    2014/01/14 22:04:24 775004F8 r bis_tv [viaccess] card detected

    2014/01/14 22:04:24 775004F8 r bis_tv [viaccess] serial: ##########

    2014/01/14 22:04:24 775004F8 r bis_tv [viaccess] provider: 1, id: ####################, sa: ########, geo: empty

    2014/01/14 22:04:25 775004F8 r bis_tv [viaccess] provider: 2, id: #################, sa: ########, geo: FF FF FF FF 

    2014/01/14 22:04:25 775004F8 r bis_tv [viaccess] class: 4C, expiry date: 2013/12/22 - 2014/01/31

    2014/01/14 22:04:25 775004F8 r bis_tv [viaccess] class: 32, expiry date: 2013/12/22 - 2014/01/31

    2014/01/14 22:04:25 775004F8 r bis_tv [viaccess] class: 64, expiry date: 2013/12/22 - 2014/01/31

    2014/01/14 22:04:25 775004F8 r bis_tv [viaccess] class: 0A, expiry date: 2013/09/06 - 2013/09/15

    2014/01/14 22:04:25 775004F8 r bis_tv [viaccess] class: 14, expiry date: 2013/09/06 - 2013/09/15

    2014/01/14 22:04:25 775004F8 r bis_tv [viaccess] class: 1E, expiry date: 2013/09/06 - 2013/09/15

    2014/01/14 22:04:25 775004F8 r bis_tv [viaccess] class: 32, expiry date: 2013/09/06 - 2013/09/15

    2014/01/14 22:04:25 775004F8 r bis_tv [viaccess] class: 64, expiry date: 2013/09/06 - 2013/09/15

    2014/01/14 22:04:25 775004F8 r bis_tv [viaccess] class: 65, expiry date: 2013/09/06 - 2013/09/15

    2014/01/14 22:04:25 775004F8 r bis_tv [viaccess] class: 96, expiry date: 2013/09/06 - 2013/09/15

    2014/01/14 22:04:26 775004F8 r bis_tv [viaccess] provider: 3, id: ###################, sa: ########, geo: FF FF FF FF 

    2014/01/14 22:04:26        0 s init for all local cards done

    2014/01/14 22:04:26        0 s anti cascading disabled

    2014/01/14 22:04:26 77255710 c plain dvbapi-client granted (anonymous, au=off)

    2014/01/14 22:04:26 77255710 c [DVBAPI] Error in oscam.dvbapi: ret=-1 | d: 0000 000000  0000 10000

    2014/01/14 22:04:26 77255710 c [DVBAPI] Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1

    2014/01/14 22:04:30 77255710 c [DVBAPI] Receiver sends PMT command 3 for channel 012D

    2014/01/14 22:04:30 77255710 c [DVBAPI] Receiver wants to demux srvid 012D on adapter 0000 camask 0008 index 0003 pmtpid 01FE

    2014/01/14 22:04:30 77255710 c [ADD PID 0] CAID: 1819 ECM_PID: 1588 PROVID: 00006D

    2014/01/14 22:04:30 77255710 c [ADD PID 1] CAID: 0500 ECM_PID: 158E PROVID: 042800

    2014/01/14 22:04:30 77255710 c [ADD PID 2] CAID: 0500 ECM_PID: 1589 PROVID: 032920

    2014/01/14 22:04:30 77255710 c [ADD PID 3] CAID: 0100 ECM_PID: 1588 PROVID: 00006D

    2014/01/14 22:04:30 77255710 c [ADD PID 4] CAID: 0500 ECM_PID: 158D PROVID: 042500

    2014/01/14 22:04:30 77255710 c [ADD PID 5] CAID: 0500 ECM_PID: 158A PROVID: 042820

    2014/01/14 22:04:30 77255710 c [ADD PID 6] CAID: 0500 ECM_PID: 158B PROVID: 051900

    2014/01/14 22:04:30 77255710 c Found 7 ECMpids and 5 STREAMpids in PMT

    2014/01/14 22:04:30 77255710 c [DVBAPI] Receiver wants to demux srvid 012D on adapter 0000 camask 0008 index 0003 pmtpid 01FE

    2014/01/14 22:04:30 77255710 c New program number: 012D (1819:012D unknown) [pmt_list_management 3]

    2014/01/14 22:04:30 77255710 c [DVBAPI] Demuxer #0 trying to descramble PID #5 CAID 0500 PROVID 042820 ECMPID 158A ANY CHID PMTPID 01FE VPID 01FF

    2014/01/14 22:04:31 77255710 c anonymous (0500&042820/0428/012D/90:764843C0E37DB2886A4616261D783765): found (515 ms) by bis_tv (L/1/2/2)

    2014/01/14 22:04:33 77255710 c anonymous (0500&042820/0428/012D/90:BEA86245159C486E0246D2B6953D6E95): found (462 ms) by bis_tv (L/1/2/2)

    -------------------------------------------------------------------------------------------------------------------------

    BIS TV kaart werkt niet in Dreambox

    in CI, CI+, (soft)cams en smartcards

    Geplaatst:

    Vanmiddag werkte het...., Bis en Canal Digitaal, nu niet meer

    Hoe kan dat nu?

     

    Zie ook deze tekst in bestand.

     

    oscam.conf:

    -------------------------------------------------------------------------------------

    [global]

    logfile                       = /media/hdd/system/log/oscam.log

    fallbacktimeout               = 2000

    nice                          = -19

    maxlogsize                    = 4000

    preferlocalcards              = 2

    dropdups                      = 1

    usrfile                       = /media/hdd/system/log/oscamuser.log

    lb_mode                       = 1

    lb_save                       = 2000

    lb_savepath                   = /media/hdd/system/log/stats

    failbantime                   = 1440

    failbancount                  = 10

     

    [dvbapi]

    enabled                       = 1

    au                            = bis_tv

    user                          = oscamdvb

    pwd                           = dvbapi

    boxtype                       = dreambox

     

    [monitor]

    port                          = 700

    nocrypt                       = 127.0.0.1,192.168.1.1-192.168.1.255

    aulow                         = 120

    monlevel                      = 4

    hideclient_to                 = 15

     

    [webif]

    httpport                      = 14200

    httprefresh                   = 45

    httpallowed                   = 127.0.0.1,192.168.0.0-255.255.255.255

    aulow                         = 120

    hideclient_to                 = 15

    ----------------------------------------------------------------------------

    oscam.server

    ----------------------------------------------------------------------------

    [reader]

    label = bis_tv

    enable = 1

    protocol = internal

    device = /dev/sci0

    caid = 0500

    detect = cd

    mhz = 500

    cardmhz = 500

    ident = 0500:042820

    group = 1

    emmcache = 1,3,15

    lb_weight = 600

    auprovid = 042820

    dropbadcws = 1

     

    [reader]

    label                         = Canal Digitaal NL 

    protocol                      = internal

    device                        = /dev/sci1

    autospeed                     = 0

    detect                        = cd

    mhz                           = 540

    cardmhz                       = 2700

    group                         = 1

    emmcache                      = 1,3,2

    ratelimitecm                  = 4

    ratelimitseconds              = 10

    srvidholdseconds              = 5

    ecmunique                     = 1

    cooldown                      = 60,600

    saveemm-unknown               = 1

    saveemm-u                     = 1

    saveemm-s                     = 1

    saveemm-g                     = 1

    dropbadcws                    = 1

    ----------------------------------------------------------------------------

    oscam.usr

    ----------------------------------------------------------------------------

    [account]

    user = user

    pwd = pass

    group = 1

    au = BIS

     

    # user dvbapi

    [account]

    user = oscamdvb

    # même nom d'user local defini dans oscam.conf section dvbapi

    pwd =  dvbapi

    keepalive = 1

    group = 1

    au = 1

     

    # users cccam (flines))

    [account]

    user = monami1

    pwd = passami1

    group = 1

    uniq = 3

    monlevel = 0

    cccmaxhops = 2

    ----------------------------------------------------------------------------

    Log vanmiddag:

    ----------------------------------------------------------------------------

    -------------------------------------------------------------------------------

    >> OSCam <<  cardserver started at Tue Jan 14 19:36:12 2014

    -------------------------------------------------------------------------------

    2014/01/14 19:36:12        0 s >> OSCam <<  cardserver started, version 1.20-unstable_svn, build r9330 (mipsel-unknown-linux-gnu)

    2014/01/14 19:36:12        0 s creating pidfile /tmp/.oscam/oscam.pid with pid 5950

    2014/01/14 19:36:12        0 s services reloaded: 0 services freed, 0 services loaded, rejected 0

    2014/01/14 19:36:12        0 s signal handling initialized

    2014/01/14 19:36:12        0 s monitor: initialized (fd=7, port=700)

    2014/01/14 19:36:12        0 s bis_tv [internal] creating thread for device /dev/sci0

    2014/01/14 19:36:12        0 s Canal_Digitaal_NL [internal] creating thread for device /dev/sci1

    2014/01/14 19:36:12   A106E0 r bis_tv [internal] Reader initialized (device=/dev/sci0, detect=cd, mhz=500, cardmhz=500)

    2014/01/14 19:36:12   A123B8 r Canal_Digitaal_NL [internal] Reader initialized (device=/dev/sci1, detect=cd, pll max=27.00 MHz, wanted mhz=5.40 MHz

    2014/01/14 19:36:12   A61828 p proxy srv312.net:20102 newcamd525 (fd=0)

    2014/01/14 19:36:12   A651D8 h webif: decompressed 64662 bytes back into 186312 bytes

    2014/01/14 19:36:12   A651D8 h HTTP Server running. ip=0.0.0.0 port=14200

    2014/01/14 19:36:12        0 s waiting for local card init

    2014/01/14 19:36:13   A106E0 r bis_tv [internal] card detected

    2014/01/14 19:36:13   A123B8 r Canal_Digitaal_NL [internal] card detected

    2014/01/14 19:36:13   ADFD50 p premium-boss-2.no-ip.org1 [cccam] proxy initialized, server premium-boss-2.no-ip.org:22000

    2014/01/14 19:36:14   A106E0 r bis_tv [internal] ATR: 3F 77 18 00 00 C2 EB 41 02 6C 90 00 

    2014/01/14 19:36:15   A106E0 r bis_tv [internal] Init card protocol T0, FI=1, F=372, D=12, N=0

    2014/01/14 19:36:15   A106E0 r bis_tv [internal] Calculated work ETU is 6.20 us reader mhz = 500

    2014/01/14 19:36:15   A106E0 r bis_tv [internal] ATR Fsmax is 5 MHz, clocking card to 5.00 (specified in reader->mhz)

    2014/01/14 19:36:15   A123B8 r Canal_Digitaal_NL [internal] ATR: 3B F7 11 00 01 40 96 70 70 0A 0E 6C B6 D6 

    2014/01/14 19:36:15   A123B8 r Canal_Digitaal_NL [internal] Init card protocol T0, FI=1, F=372, D=1, N=1

    2014/01/14 19:36:15   A123B8 r Canal_Digitaal_NL [internal]  TEST tempo mhz check = 540 mhz

    2014/01/14 19:36:15   A123B8 r Canal_Digitaal_NL [internal] Calculated work ETU is 68.89 us reader mhz = 540

    2014/01/14 19:36:15   A123B8 r Canal_Digitaal_NL [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 5.40 Mhz (nearest possible mhz specified reader->cardmhz)

    2014/01/14 19:36:16   A123B8 r Canal_Digitaal_NL [internal] type: SECA, caid: 0100, serial: #########, card: Mediaguard v10.0

    2014/01/14 19:36:16   A123B8 r Canal_Digitaal_NL [internal] Request provider 1

    2014/01/14 19:36:16   A123B8 r Canal_Digitaal_NL [internal] provider 1: 0000, valid: 1, name: MANAGMENT, expiry date: 2014/03/12

    2014/01/14 19:36:16   A123B8 r Canal_Digitaal_NL [internal] SA: ########

    2014/01/14 19:36:16   A123B8 r Canal_Digitaal_NL [internal] PBM for provider 1: 799008001c000

    2014/01/14 19:36:16   A123B8 r Canal_Digitaal_NL [internal] Request provider 2

    2014/01/14 19:36:16   A123B8 r Canal_Digitaal_NL [internal] Detected seca3 card

    2014/01/14 19:36:16   A123B8 r Canal_Digitaal_NL [internal] provider 2: 006A, valid: 1, name: CANALDIGITAAL, expiry date: 2014/03/08

    2014/01/14 19:36:16   A123B8 r Canal_Digitaal_NL [internal] SA: ########

    2014/01/14 19:36:16   A123B8 r Canal_Digitaal_NL [internal] PBM for provider 2: fc00000000000000

    2014/01/14 19:36:16   A123B8 r Canal_Digitaal_NL [internal] providers: 2 (0000,006A)

    2014/01/14 19:36:16   A123B8 r Canal_Digitaal_NL [internal] parental locked

    2014/01/14 19:36:16   A123B8 r Canal_Digitaal_NL [internal] ready for requests

    2014/01/14 19:36:16   A123B8 r Canal_Digitaal_NL [internal] found card system seca

    2014/01/14 19:36:16   A123B8 r Canal_Digitaal_NL [seca] THIS WAS A SUCCESFULL START ATTEMPT No  1 out of max alloted of 1

    2014/01/14 19:36:16   A123B8 r Canal_Digitaal_NL [seca] Request provider 1

    2014/01/14 19:36:16   A123B8 r Canal_Digitaal_NL [seca] provider 1: 0000, valid: 1, name: MANAGMENT, expiry date: 2014/03/12

    2014/01/14 19:36:16   A123B8 r Canal_Digitaal_NL [seca] SA: ########

    2014/01/14 19:36:16   A123B8 r Canal_Digitaal_NL [seca] PBM for provider 1: 799008001c000

    2014/01/14 19:36:16   A123B8 r Canal_Digitaal_NL [seca] Request provider 2

    2014/01/14 19:36:16   A123B8 r Canal_Digitaal_NL [seca] Detected seca3 card

    2014/01/14 19:36:16   A123B8 r Canal_Digitaal_NL [seca] provider 2: 006A, valid: 1, name: CANALDIGITAAL, expiry date: 2014/03/08

    2014/01/14 19:36:16   A123B8 r Canal_Digitaal_NL [seca] SA: ########

    2014/01/14 19:36:16   A123B8 r Canal_Digitaal_NL [seca] PBM for provider 2: fc00000000000000

    2014/01/14 19:36:17   A106E0 r bis_tv [internal] card system not supported

    2014/01/14 19:36:17   A106E0 r bis_tv [internal] Normal mode failed, reverting to Deprecated Mode

    2014/01/14 19:36:18   A106E0 r bis_tv [internal] ATR: 3F 77 18 00 00 C2 EB 41 02 6C 90 00 

    2014/01/14 19:36:18   A106E0 r bis_tv [internal] Warning: D=0 is invalid, forcing D=1

    2014/01/14 19:36:18   A106E0 r bis_tv [internal] Init card protocol T0, FI=1, F=372, D=1, N=0

    2014/01/14 19:36:18   A106E0 r bis_tv [internal] Calculated work ETU is 74.40 us reader mhz = 500

    2014/01/14 19:36:18   A106E0 r bis_tv [internal] ATR Fsmax is 5 MHz, clocking card to 5.00 (specified in reader->mhz)

    2014/01/14 19:36:19   A106E0 r bis_tv [internal] using ecm #70e for long viaccess ecm

    2014/01/14 19:36:20   A106E0 r bis_tv [internal] type: Viaccess (non-standard atr), caid: 0500, serial: ##########

    2014/01/14 19:36:20   A106E0 r bis_tv [internal] providers: 3 (FFF400,042820,042830)

    2014/01/14 19:36:20   A106E0 r bis_tv [internal] ready for requests

    2014/01/14 19:36:20   A106E0 r bis_tv [internal] found card system viaccess

    2014/01/14 19:36:20   A106E0 r bis_tv [viaccess] THIS WAS A SUCCESFULL START ATTEMPT No  1 out of max alloted of 1

    2014/01/14 19:36:20   A106E0 r bis_tv [viaccess] card detected

    2014/01/14 19:36:20   A106E0 r bis_tv [viaccess] serial: ##########

    2014/01/14 19:36:21   A106E0 r bis_tv [viaccess] provider: 1, id: ####################, sa: ########, geo: empty

    2014/01/14 19:36:21   A106E0 r bis_tv [viaccess] provider: 2, id: #################, sa: ########, geo: FF FF FF FF 

    2014/01/14 19:36:21   A106E0 r bis_tv [viaccess] class: 4C, expiry date: 2013/12/22 - 2014/01/31

    2014/01/14 19:36:21   A106E0 r bis_tv [viaccess] class: 32, expiry date: 2013/12/22 - 2014/01/31

    2014/01/14 19:36:21   A106E0 r bis_tv [viaccess] class: 64, expiry date: 2013/12/22 - 2014/01/31

    2014/01/14 19:36:21   A106E0 r bis_tv [viaccess] class: 0A, expiry date: 2013/09/06 - 2013/09/15

    2014/01/14 19:36:21   A106E0 r bis_tv [viaccess] class: 14, expiry date: 2013/09/06 - 2013/09/15

    2014/01/14 19:36:21   A106E0 r bis_tv [viaccess] class: 1E, expiry date: 2013/09/06 - 2013/09/15

    2014/01/14 19:36:21   A106E0 r bis_tv [viaccess] class: 32, expiry date: 2013/09/06 - 2013/09/15

    2014/01/14 19:36:21   A106E0 r bis_tv [viaccess] class: 64, expiry date: 2013/09/06 - 2013/09/15

    2014/01/14 19:36:21   A106E0 r bis_tv [viaccess] class: 65, expiry date: 2013/09/06 - 2013/09/15

    2014/01/14 19:36:21   A106E0 r bis_tv [viaccess] class: 96, expiry date: 2013/09/06 - 2013/09/15

    2014/01/14 19:36:22   A106E0 r bis_tv [viaccess] provider: 3, id: ###################, sa: ########, geo: FF FF FF FF 

    2014/01/14 19:36:22        0 s init for all local cards done

    2014/01/14 19:36:22        0 s anti cascading disabled

    2014/01/14 19:36:22 77733AE0 c plain dvbapi-client granted (anonymous, au=off)

    2014/01/14 19:36:22 77733AE0 c [DVBAPI] Error in oscam.dvbapi: ret=-1 | d: 0000 000000  0000 10000

    2014/01/14 19:36:22 77733AE0 c [DVBAPI] Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1

    2014/01/14 19:36:22 77733AE0 c [DVBAPI] Receiver sends PMT command 3 for channel 1B6C

    2014/01/14 19:36:22 77733AE0 c [DVBAPI] Receiver wants to demux srvid 1B6C on adapter 0000 camask 0008 index 0003 pmtpid 09D8

    2014/01/14 19:36:22 77733AE0 c [ADD PID 0] CAID: 1817 ECM_PID: 070B PROVID: 00006A

    2014/01/14 19:36:22 77733AE0 c [ADD PID 1] CAID: 0100 ECM_PID: 070B PROVID: 00006A

    2014/01/14 19:36:22 77733AE0 c [ADD STREAM 1] CAID: 0100 ECM_PID: 070B PROVID: 00006A

    2014/01/14 19:36:22 77733AE0 c Found 2 ECMpids and 3 STREAMpids in PMT

    2014/01/14 19:36:22 77733AE0 c [DVBAPI] Receiver wants to demux srvid 1B6C on adapter 0000 camask 0008 index 0003 pmtpid 09D8

    2014/01/14 19:36:22 77733AE0 c New program number: 1B6C (1817:1B6C unknown) [pmt_list_management 3]

    2014/01/14 19:36:22 77733AE0 c [DVBAPI] Demuxer #0 trying to descramble PID #1 CAID 0100 PROVID 00006A ECMPID 070B ANY CHID PMTPID 09D8 VPID 0202

    2014/01/14 19:36:23 77733AE0 c anonymous (0100&00006A/5C00/1B6C/64:8080BA09039D6DE0E2AA07D38DAAE44E): found (339 ms) by Canal_Digitaal_NL (L/1/4/4)

    2014/01/14 19:36:23 77733AE0 c anonymous (0100&00006A/5C00/1B6C/64:E07DF2C599446A2EA95B3F47C868BEB3): found (309 ms) by Canal_Digitaal_NL (L/1/4/4)

    2014/01/14 19:36:33 77733AE0 c anonymous (0100&00006A/5C00/1B6C/64:FCF9A8693963F7FD04F6D136F019B9B5): found (308 ms) by Canal_Digitaal_NL (L/1/4/4)

    2014/01/14 19:36:43 77733AE0 c anonymous (0100&00006A/5C00/1B6C/64:8FBD74B45B6EA449B364D38AEC15CA86): found (308 ms) by Canal_Digitaal_NL (L/1/4/4)

    2014/01/14 19:36:53 77733AE0 c anonymous (0100&00006A/5C00/1B6C/64:86CE9F34D12C0DC37546D95BC0C76331): found (311 ms) by Canal_Digitaal_NL (L/1/4/4)

    2014/01/14 19:37:03 77733AE0 c anonymous (0100&00006A/5C00/1B6C/64:BCAF6BAB35E45CA1360DA8D49D5D1444): found (307 ms) by Canal_Digitaal_NL (L/1/4/4)

    2014/01/14 19:37:13 77733AE0 c anonymous (0100&00006A/5C00/1B6C/64:914034ECC3AFCF4F5CFEB582DBF4C947): found (307 ms) by Canal_Digitaal_NL (L/1/4/4)

    2014/01/14 19:37:24 77733AE0 c anonymous (0100&00006A/5C00/1B6C/64:DFE5FE4968F5FC46960A2384F8340C39): found (308 ms) by Canal_Digitaal_NL (L/1/4/4)

    2014/01/14 19:37:34 77733AE0 c anonymous (0100&00006A/5C00/1B6C/64:52304964AEB1C2E50B7BBDC1F6C61C60): found (320 ms) by Canal_Digitaal_NL (L/1/4/4)

    2014/01/14 19:37:44 77733AE0 c anonymous (0100&00006A/5C00/1B6C/64:1E0EE39C7EC33CFA6D226E70E42CCC10): found (308 ms) by Canal_Digitaal_NL (L/1/4/4)

    2014/01/14 19:37:54 77733AE0 c anonymous (0100&00006A/5C00/1B6C/64:4F3ACA0FA527B53D4DB032BE84798D36): found (308 ms) by Canal_Digitaal_NL (L/1/4/4)

    2014/01/14 19:38:04 77733AE0 c anonymous (0100&00006A/5C00/1B6C/64:666F685D335CD9AB2E07F7D82CA032C3): found (308 ms) by Canal_Digitaal_NL (L/1/4/4)

    2014/01/14 19:38:14 77733AE0 c anonymous (0100&00006A/5C00/1B6C/64:D9701B49218A96D497B8818799B3A989): found (312 ms) by Canal_Digitaal_NL (L/1/4/4)

    2014/01/14 19:38:24 77733AE0 c anonymous (0100&00006A/5C00/1B6C/64:A94F5B5D2F83DC97791B9B8212B24AF1): found (308 ms) by Canal_Digitaal_NL (L/1/4/4)

    2014/01/14 19:38:34 77733AE0 c anonymous (0100&00006A/5C00/1B6C/64:72D3834F867EB36D3794E2C7479AF435): found (308 ms) by Canal_Digitaal_NL (L/1/4/4)

    2014/01/14 19:38:44 77733AE0 c anonymous (0100&00006A/5C00/1B6C/64:77621C9DFABA113B085BF7288231C45C): found (309 ms) by Canal_Digitaal_NL (L/1/4/4)

    2014/01/14 19:38:51 77733AE0 c [DVBAPI] Receiver sends PMT command 3 for channel 012D

    2014/01/14 19:38:51 77733AE0 c [DVBAPI] Receiver wants to demux srvid 012D on adapter 0000 camask 0008 index 0003 pmtpid 01FE

    2014/01/14 19:38:51 77733AE0 c [ADD PID 0] CAID: 1819 ECM_PID: 1588 PROVID: 00006D

    2014/01/14 19:38:51 77733AE0 c [ADD PID 1] CAID: 0500 ECM_PID: 158E PROVID: 042800

    2014/01/14 19:38:51 77733AE0 c [ADD PID 2] CAID: 0500 ECM_PID: 1589 PROVID: 032920

    2014/01/14 19:38:51 77733AE0 c [ADD PID 3] CAID: 0100 ECM_PID: 1588 PROVID: 00006D

    2014/01/14 19:38:51 77733AE0 c [ADD PID 4] CAID: 0500 ECM_PID: 158D PROVID: 042500

    2014/01/14 19:38:51 77733AE0 c [ADD PID 5] CAID: 0500 ECM_PID: 158A PROVID: 042820

    2014/01/14 19:38:51 77733AE0 c [ADD PID 6] CAID: 0500 ECM_PID: 158B PROVID: 051900

    2014/01/14 19:38:51 77733AE0 c Found 7 ECMpids and 5 STREAMpids in PMT

    2014/01/14 19:38:51 77733AE0 c [DVBAPI] Receiver wants to demux srvid 012D on adapter 0000 camask 0008 index 0003 pmtpid 01FE

    2014/01/14 19:38:51 77733AE0 c New program number: 012D (1819:012D unknown) [pmt_list_management 3]

    2014/01/14 19:38:51 77733AE0 c [DVBAPI] Demuxer #0 trying to descramble PID #5 CAID 0500 PROVID 042820 ECMPID 158A ANY CHID PMTPID 01FE VPID 01FF

    2014/01/14 19:38:51 77733AE0 c anonymous (0500&042820/0428/012D/90:4BE0BC624F1C5ED32CF2EECC3DF4CFEE): found (379 ms) by bis_tv

    2014/01/14 19:38:54 77733AE0 c anonymous (0500&042820/0428/012D/90:A6DCD2A5F33D5CA63CF039B28AEBCC10): found (344 ms) by bis_tv

    2014/01/14 19:39:04 77733AE0 c anonymous (0500&042820/0428/012D/90:60EE907099B915322119CC8DF6F7C418): found (342 ms) by bis_tv

    2014/01/14 19:39:11 77733AE0 c [DVBAPI] Receiver sends PMT command 3 for channel 1B6C

    2014/01/14 19:39:11 77733AE0 c [DVBAPI] Receiver wants to demux srvid 1B6C on adapter 0000 camask 0008 index 0003 pmtpid 09D8

    2014/01/14 19:39:11 77733AE0 c [ADD PID 0] CAID: 1817 ECM_PID: 070B PROVID: 00006A

    2014/01/14 19:39:11 77733AE0 c [ADD PID 1] CAID: 0100 ECM_PID: 070B PROVID: 00006A

    2014/01/14 19:39:11 77733AE0 c [ADD STREAM 1] CAID: 0100 ECM_PID: 070B PROVID: 00006A

    2014/01/14 19:39:11 77733AE0 c Found 2 ECMpids and 3 STREAMpids in PMT

    2014/01/14 19:39:11 77733AE0 c [DVBAPI] Receiver wants to demux srvid 1B6C on adapter 0000 camask 0008 index 0003 pmtpid 09D8

    2014/01/14 19:39:11 77733AE0 c New program number: 1B6C (1817:1B6C unknown) [pmt_list_management 3]

    2014/01/14 19:39:11 77733AE0 c [DVBAPI] Demuxer #0 trying to descramble PID #1 CAID 0100 PROVID 00006A ECMPID 070B ANY CHID PMTPID 09D8 VPID 0202

    2014/01/14 19:39:11 77733AE0 c anonymous (0100&00006A/5C00/1B6C/64:3593FE0226C86B122124AFA4FF0169D5): found (313 ms) by Canal_Digitaal_NL (L/1/4/4)

    2014/01/14 19:39:12 77733AE0 c anonymous (0100&00006A/5C00/1B6C/64:989A39A5A847DB78FBBE02F02F1CF93D): found (310 ms) by Canal_Digitaal_NL (L/1/4/4)

    2014/01/14 19:39:24 77733AE0 c anonymous (0100&00006A/5C00/1B6C/64:72CD089626B2EB5D8F33E40885497AF3): found (307 ms) by Canal_Digitaal_NL (L/1/4/4)

    2014/01/14 19:39:34 77733AE0 c anonymous (0100&00006A/5C00/1B6C/64:55D9EF68A0375E933E393F558AC85AE9): found (319 ms) by Canal_Digitaal_NL (L/1/4/4)

    2014/01/14 19:39:44 77733AE0 c anonymous (0100&00006A/5C00/1B6C/64:9C8623FE3CDE34DE491F0364AAB76580): found (313 ms) by Canal_Digitaal_NL (L/1/4/4)

    ----------------------------------------------------------------------------

    Later opde avond bij herstart

    ----------------------------------------------------------------------------

    -------------------------------------------------------------------------------

    >> OSCam <<  cardserver started at Tue Jan 14 21:01:09 2014

    -------------------------------------------------------------------------------

    2014/01/14 21:01:09        0 s >> OSCam <<  cardserver started, version 1.20-unstable_svn, build r9330 (mipsel-unknown-linux-gnu)

    2014/01/14 21:01:09        0 s creating pidfile /tmp/.oscam/oscam.pid with pid 1227

    2014/01/14 21:01:09        0 s services reloaded: 0 services freed, 0 services loaded, rejected 0

    2014/01/14 21:01:09        0 s signal handling initialized

    2014/01/14 21:01:09        0 s monitor: initialized (fd=7, port=700)

    2014/01/14 21:01:09        0 s bis_tv [internal] creating thread for device /dev/sci0

    2014/01/14 21:01:09        0 s Canal_Digitaal_NL [internal] creating thread for device /dev/sci1

    2014/01/14 21:01:09 775004F8 r bis_tv [internal] Reader initialized (device=/dev/sci0, detect=cd, mhz=500, cardmhz=500)

    2014/01/14 21:01:09 77502310 r Canal_Digitaal_NL [internal] Reader initialized (device=/dev/sci1, detect=cd, pll max=27.00 MHz, wanted mhz=5.40 MHz

    2014/01/14 21:01:09   A236E0 h webif: decompressed 64662 bytes back into 186312 bytes

    2014/01/14 21:01:09   A236E0 h HTTP Server running. ip=0.0.0.0 port=14200

    2014/01/14 21:01:09        0 s waiting for local card init

    2014/01/14 21:01:10 775004F8 r bis_tv [internal] card detected

    2014/01/14 21:01:10 77502310 r Canal_Digitaal_NL [internal] card detected

    2014/01/14 21:01:11 775004F8 r bis_tv [internal] ATR: 3F 77 18 00 00 C2 EB 41 02 6C 90 00 

    2014/01/14 21:01:11 775004F8 r bis_tv [internal] Init card protocol T0, FI=1, F=372, D=12, N=0

    2014/01/14 21:01:11 775004F8 r bis_tv [internal] Calculated work ETU is 6.20 us reader mhz = 500

    2014/01/14 21:01:11 775004F8 r bis_tv [internal] ATR Fsmax is 5 MHz, clocking card to 5.00 (specified in reader->mhz)

    2014/01/14 21:01:11 77502310 r Canal_Digitaal_NL [internal] ATR: 3B F7 11 00 01 40 96 70 70 0A 0E 6C B6 D6 

    2014/01/14 21:01:11 77502310 r Canal_Digitaal_NL [internal] Init card protocol T0, FI=1, F=372, D=1, N=1

    2014/01/14 21:01:11 77502310 r Canal_Digitaal_NL [internal]  TEST tempo mhz check = 540 mhz

    2014/01/14 21:01:11 77502310 r Canal_Digitaal_NL [internal] Calculated work ETU is 68.89 us reader mhz = 540

    2014/01/14 21:01:12 77502310 r Canal_Digitaal_NL [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 5.40 Mhz (nearest possible mhz specified reader->cardmhz)

    2014/01/14 21:01:13 77502310 r Canal_Digitaal_NL [internal] type: SECA, caid: 0100, serial: #########, card: Mediaguard v10.0

    2014/01/14 21:01:13 77502310 r Canal_Digitaal_NL [internal] Request provider 1

    2014/01/14 21:01:13 77502310 r Canal_Digitaal_NL [internal] provider 1: 0000, valid: 1, name: MANAGMENT, expiry date: 2014/03/12

    2014/01/14 21:01:13 77502310 r Canal_Digitaal_NL [internal] SA: ########

    2014/01/14 21:01:13 77502310 r Canal_Digitaal_NL [internal] PBM for provider 1: 799008001c000

    2014/01/14 21:01:13 77502310 r Canal_Digitaal_NL [internal] Request provider 2

    2014/01/14 21:01:13 77502310 r Canal_Digitaal_NL [internal] Detected seca3 card

    2014/01/14 21:01:13 77502310 r Canal_Digitaal_NL [internal] provider 2: 006A, valid: 1, name: CANALDIGITAAL, expiry date: 2014/03/08

    2014/01/14 21:01:13 77502310 r Canal_Digitaal_NL [internal] SA: ########

    2014/01/14 21:01:13 77502310 r Canal_Digitaal_NL [internal] PBM for provider 2: fc00000000000000

    2014/01/14 21:01:13 77502310 r Canal_Digitaal_NL [internal] providers: 2 (0000,006A)

    2014/01/14 21:01:13 77502310 r Canal_Digitaal_NL [internal] parental locked

    2014/01/14 21:01:13 77502310 r Canal_Digitaal_NL [internal] ready for requests

    2014/01/14 21:01:13 77502310 r Canal_Digitaal_NL [internal] found card system seca

    2014/01/14 21:01:13 77502310 r Canal_Digitaal_NL [seca] THIS WAS A SUCCESFULL START ATTEMPT No  1 out of max alloted of 1

    2014/01/14 21:01:13 77502310 r Canal_Digitaal_NL [seca] Request provider 1

    2014/01/14 21:01:13 77502310 r Canal_Digitaal_NL [seca] provider 1: 0000, valid: 1, name: MANAGMENT, expiry date: 2014/03/12

    2014/01/14 21:01:13 77502310 r Canal_Digitaal_NL [seca] SA: ########

    2014/01/14 21:01:13 77502310 r Canal_Digitaal_NL [seca] PBM for provider 1: 799008001c000

    2014/01/14 21:01:13 77502310 r Canal_Digitaal_NL [seca] Request provider 2

    2014/01/14 21:01:13 77502310 r Canal_Digitaal_NL [seca] Detected seca3 card

    2014/01/14 21:01:13 77502310 r Canal_Digitaal_NL [seca] provider 2: 006A, valid: 1, name: CANALDIGITAAL, expiry date: 2014/03/08

    2014/01/14 21:01:13 77502310 r Canal_Digitaal_NL [seca] SA: ########

    2014/01/14 21:01:13 77502310 r Canal_Digitaal_NL [seca] PBM for provider 2: fc00000000000000

    2014/01/14 21:01:14 775004F8 r bis_tv [internal] card system not supported

    2014/01/14 21:01:14 775004F8 r bis_tv [internal] Normal mode failed, reverting to Deprecated Mode

    2014/01/14 21:01:15 775004F8 r bis_tv [internal] ATR: 3F 77 18 00 00 C2 EB 41 02 6C 90 00 

    2014/01/14 21:01:15 775004F8 r bis_tv [internal] Warning: D=0 is invalid, forcing D=1

    2014/01/14 21:01:15 775004F8 r bis_tv [internal] Init card protocol T0, FI=1, F=372, D=1, N=0

    2014/01/14 21:01:15 775004F8 r bis_tv [internal] Calculated work ETU is 74.40 us reader mhz = 500

    2014/01/14 21:01:15 775004F8 r bis_tv [internal] ATR Fsmax is 5 MHz, clocking card to 5.00 (specified in reader->mhz)

    2014/01/14 21:01:17 775004F8 r bis_tv [internal] card system not supported

    2014/01/14 21:01:17 775004F8 r bis_tv [internal] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1

    2014/01/14 21:01:17 775004F8 r bis_tv [internal] card initializing error

    2014/01/14 21:01:18        0 s init for all local cards done

    2014/01/14 21:01:18        0 s anti cascading disabled

    2014/01/14 21:01:18 77542EC0 c plain dvbapi-client granted (anonymous, au=off)

    2014/01/14 21:01:18 77542EC0 c [DVBAPI] Error in oscam.dvbapi: ret=-1 | d: 0000 000000  0000 10000

    2014/01/14 21:01:18 77542EC0 c [DVBAPI] Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1

    2014/01/14 21:01:21 77542EC0 c [DVBAPI] Receiver sends PMT command 3 for channel 012D

    2014/01/14 21:01:21 77542EC0 c [DVBAPI] Receiver wants to demux srvid 012D on adapter 0000 camask 0008 index 0003 pmtpid 01FE

    2014/01/14 21:01:21 77542EC0 c [ADD PID 0] CAID: 1819 ECM_PID: 1588 PROVID: 00006D

    2014/01/14 21:01:21 77542EC0 c [ADD PID 1] CAID: 0500 ECM_PID: 158E PROVID: 042800

    2014/01/14 21:01:21 77542EC0 c [ADD PID 2] CAID: 0500 ECM_PID: 1589 PROVID: 032920

    2014/01/14 21:01:21 77542EC0 c [ADD PID 3] CAID: 0100 ECM_PID: 1588 PROVID: 00006D

    2014/01/14 21:01:21 77542EC0 c [ADD PID 4] CAID: 0500 ECM_PID: 158D PROVID: 042500

    2014/01/14 21:01:21 77542EC0 c [ADD PID 5] CAID: 0500 ECM_PID: 158A PROVID: 042820

    2014/01/14 21:01:21 77542EC0 c [ADD PID 6] CAID: 0500 ECM_PID: 158B PROVID: 051900

    2014/01/14 21:01:21 77542EC0 c Found 7 ECMpids and 5 STREAMpids in PMT

    2014/01/14 21:01:21 77542EC0 c [DVBAPI] Receiver wants to demux srvid 012D on adapter 0000 camask 0008 index 0003 pmtpid 01FE

    2014/01/14 21:01:21 77542EC0 c New program number: 012D (1819:012D unknown) [pmt_list_management 3]

    2014/01/14 21:01:21 77542EC0 c [DVBAPI] Demuxer #0 trying to descramble PID #5 CAID 0500 PROVID 042820 ECMPID 158A ANY CHID PMTPID 01FE VPID 01FF

    2014/01/14 21:01:22 77542EC0 c anonymous (0500&042820/0428/012D/90:FEF9987B59BADC2BDB71F0AEBCEB8770): rejected  (770 ms) by uydu_merkezi@hotmail.com,_kamcek@outlook.com

    2014/01/14 21:01:22 77542EC0 c anonymous (0500&042820/0428/012D/90:FEF9987B59BADC2BDB71F0AEBCEB8770): rejected group (3 ms) (no matching reader)

    2014/01/14 21:01:22 77542EC0 c [DVBAPI] Demuxer #0 impossible to descramble PID #0 CAID 1819 PROVID 00006D ECMPID 1588 PMTPID 01FE (NO MATCHING READER)

    2014/01/14 21:01:22 77542EC0 c [DVBAPI] Demuxer #0 trying to descramble PID #1 CAID 0500 PROVID 042800 ECMPID 158E ANY CHID PMTPID 01FE VPID 01FF

    ----------------------------------------------------------------------------

    OpenPli 3.0 & Oscam issues

    in Dreambox

    Geplaatst:

    Dacht dat ik dus gek werd, hoop proberen, hadden ze vol de lol mijn 2 kaarten omgewisseld! Grapjassen!

     

    Nog wel issue met Oscam Status, maar dat geeft niet, want ik gebruik toch alleen me kaarten.

     

    Dus weer helemaal happy met me OpenPli 3.0

    OpenPli 3.0 & Oscam issues

    in Dreambox

    Geplaatst:

    Beste Allemaal,

     

    Ik gebruik al een tijdje OpenPli 3.0 met veel plezier. Af en toe crashed deze en dan is het de laatste build erop zetten en het werkt weer. Binnen een paar minuten heb ik alles aan de praat.

     

    Ik heb een CanalDigitaal en TNTsat kaart. Beide aan de praat met Oscam na stap voor stap de configuratie te hebben gedaan.

     

    Dus ik ben een zeer tevreden OpenPli 3.0 gebruiker.

     

    Ik kwam gister van vakantie terug en mijn Oscam werkte niet meer en om de 8 minuten kreeg ik een crash met de autotimer.

     

    Nieuwe image heeft het crashen verholpen, maar wat ik ook doe, m'n Oscam krijg ik niet meer aan de praat, terwijl ik goed werkende configuratie voor CanalDigitaal en TNTsat heb. Ik heb wel het idee dat de kaart wordt gezien, maar dat het daarbij blijft.

     

    Ander probleempje is dat ik de Oscam status niet kan gebruiken. Hier zal wel het probleem wellicht zitten.

     

    Iemand een idee? en welk commando moet ik uitvoeren om elke file op het systeem volledig op te zetten, dus een chmod 7777 of chmod 777, maar dan voor alle files en onderliggende directories. is dat met de -r optie?

     

    Gelukkig werkt de CCCam wel, maar dan alleen voor de CanalDigitaal.

     

    Iemand een idee hoe ik de Oscam aan de praat kan krijgen?

×
×
  • Nieuwe aanmaken...