IP camera schrijft MKV bestanden weg die niet benaderbaar zijn.

[Con]

Ik kwam per toeval iets vreemds tegen met "Treesize" 

op de Pi waarop ik probeerde te FTP-en.

Hoe moet ik de output van Treesize interpreteren?

 

Eerst even de grootte op de Pi en daarna een shot van Treesize.

pi@HD ~ $ df
Filesystem     1K-blocks    Used Available Use% Mounted on
/dev/root       15077848 3154624  11260332  22% /
devtmpfs          242776       0    242776   0% /dev
tmpfs              49412    2960     46452   6% /run
tmpfs               5120       0      5120   0% /run/lock
tmpfs              98800       0     98800   0% /run/shm
/dev/mmcblk0p1     57288   20384     36904  36% /boot

23 mei 2016 aangepast door Con

[Psychosammie]

Dat ziet er inderdaad raar uit. Treesize geeft normaal een overzicht van je directory structuur. Nu lijkt het alsof je allemaal X11 subdirectories hebt. Kan dat kloppen?

[Con]

Ja inderdaad, daar ziet het naar uit. Hoop dat iemand weet hoe dit kan.

[Psychosammie]

Maar heb je dan ook allemaal X11 sub-directories?

[wiz]

Enige wat ik me kan voorstellen is dat treesize de symbolic links niet correct intepreteert, dan krijg je dit soort dingen.

 

Of je hebt echt 10 x11 subdirectories, maar dat kan ik me eigenlijk niet voorstellen.

[Con]

Dit is de PI;
pi@HD /usr/bin/X11/X11/X11/X11/X11/X11/X11/X11/X11/X11/X11/X11/X11/X11 $

Ik kan de waarde niet inschatten maar hieronder wat Windows verkenner ziet;

 

[Con]

Goed, de draad weer opgepakt en Debian er opnieuw opgezet.

 

Moet ik nu ook nog iets met Samba doen om de directory te

benaderen of is dat niet van toepassing als je de FTP-tut volgt.

Ze schrijven daar immers helemaal niet over.

[wiz]

als je vanaf een windows apparaat bij de folder wilt waar naartoe wordt geftp'ed zou je dat kunnen doen. Heb je die behoefte niet dan hoef je er niets aan aan te passen.

[Con]

De camera schrijft (althans, dat is nog niet gelukt) de video-fragmenten (benaderbaar) weg.

 

Met een willekeurige pc wil ik dan de beelden kunnen zien.

[Con]

Goed, Rasbian weer geïnstalleerd en het volgende toegepast;

anonymous_enable=NO
local_enable=YES
write_enable=YES
local_umask=022
chroot_local_user=YES
user_sub_token=$USER
local_root=/home/$USER/ftp

En vervolgens de volgende mappen aangemaakt (weliswaar met "sudo")

mkdir /home//ftp
mkdir /home//ftp/files
chmod a-w /home//ftp

Dit zijn mijn instellingen in de camera;

 

[wiz]

Ziet er goed uit zo. Die pi user is een normale gebruiker Con? Werkt het nu naar behoren?

[Con]

BIJNA.

 

De camera schrijft nu goed weg, dus de files zijn te openen met bv VLC.

 

Alleen nu krijg ik Samba weer niet aan de praat (word een beetje misselijk)

Alle Pi's zijn te zien. Hier nu Samba opgezet en Windows vertikt het de map

te vertonen (met FileZilla gaat het wel).

[wiz]

wat staat er zoal in je smb.conf dan?

[Con]

Vreemd is weer dat ik de PI wel gelijk op mijn Android phone krijg te zien, Windows is wéér dwars.

 

Maar goed dit is de lap tekst;

#
# Sample configuration file for the Samba suite for Debian GNU/Linux.
#
#
# This is the main Samba configuration file. You should read the
# smb.conf(5) manual page in order to understand the options listed
# here. Samba has a huge number of configurable options most of which 
# are not shown in this example
#
# Some options that are often worth tuning have been included as
# commented-out examples in this file.
#  - When such options are commented with ";", the proposed setting
#    differs from the default Samba behaviour
#  - When commented with "#", the proposed setting is the default
#    behaviour of Samba but the option is considered important
#    enough to be mentioned here
#
# NOTE: Whenever you modify this file you should run the command
# "testparm" to check that you have not made any basic syntactic 
# errors. 

#======================= Global Settings =======================

[global]

## Browsing/Identification ###

# Change this to the workgroup/NT-domain name your Samba server will part of
   workgroup = WORKGROUP

# Windows Internet Name Serving Support Section:
# WINS Support - Tells the NMBD component of Samba to enable its WINS Server
  wins support = yes

# WINS Server - Tells the NMBD components of Samba to be a WINS Client
# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
;   wins server = w.x.y.z

# This will prevent nmbd to search for NetBIOS names through DNS.
   dns proxy = no

#### Networking ####

# The specific set of interfaces / networks to bind to
# This can be either the interface name or an IP address/netmask;
# interface names are normally preferred
;   interfaces = 127.0.0.0/8 eth0

# Only bind to the named interfaces and/or networks; you must use the
# 'interfaces' option above to use this.
# It is recommended that you enable this feature if your Samba machine is
# not protected by a firewall or is a firewall itself.  However, this
# option cannot handle dynamic or non-broadcast interfaces correctly.
;   bind interfaces only = yes



#### Debugging/Accounting ####

# This tells Samba to use a separate log file for each machine
# that connects
   log file = /var/log/samba/log.%m

# Cap the size of the individual log files (in KiB).
   max log size = 1000

# If you want Samba to only log through syslog then set the following
# parameter to 'yes'.
#   syslog only = no

# We want Samba to log a minimum amount of information to syslog. Everything
# should go to /var/log/samba/log.{smbd,nmbd} instead. If you want to log
# through syslog you should set the following parameter to something higher.
   syslog = 0

# Do something sensible when Samba crashes: mail the admin a backtrace
   panic action = /usr/share/samba/panic-action %d


####### Authentication #######

# Server role. Defines in which mode Samba will operate. Possible
# values are "standalone server", "member server", "classic primary
# domain controller", "classic backup domain controller", "active
# directory domain controller". 
#
# Most people will want "standalone sever" or "member server".
# Running as "active directory domain controller" will require first
# running "samba-tool domain provision" to wipe databases and create a
# new domain.
   server role = standalone server

# If you are using encrypted passwords, Samba will need to know what
# password database type you are using.  
   passdb backend = tdbsam

   obey pam restrictions = yes

# This boolean parameter controls whether Samba attempts to sync the Unix
# password with the SMB password when the encrypted SMB password in the
# passdb is changed.
   unix password sync = yes

# For Unix password sync to work on a Debian GNU/Linux system, the following
# parameters must be set (thanks to Ian Kahan <<kahan@informatik.tu-muenchen.de> for
# sending the correct chat script for the passwd program in Debian Sarge).
   passwd program = /usr/bin/passwd %u
   passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* .

# This boolean controls whether PAM will be used for password changes
# when requested by an SMB client instead of the program listed in
# 'passwd program'. The default is 'no'.
   pam password change = yes

# This option controls how unsuccessful authentication attempts are mapped
# to anonymous connections
   map to guest = bad user

########## Domains ###########

#
# The following settings only takes effect if 'server role = primary
# classic domain controller', 'server role = backup domain controller'
# or 'domain logons' is set 
#

# It specifies the location of the user's
# profile directory from the client point of view) The following
# required a [profiles] share to be setup on the samba server (see
# below)
;   logon path = \\%N\profiles\%U
# Another common choice is storing the profile in the user's home directory
# (this is Samba's default)
#   logon path = \\%N\%U\profile

# The following setting only takes effect if 'domain logons' is set
# It specifies the location of a user's home directory (from the client
# point of view)
;   logon drive = H:
#   logon home = \\%N\%U

# The following setting only takes effect if 'domain logons' is set
# It specifies the script to run during logon. The script must be stored
# in the [netlogon] share
# NOTE: Must be store in 'DOS' file format convention
;   logon script = logon.cmd

# This allows Unix users to be created on the domain controller via the SAMR
# RPC pipe.  The example command creates a user account with a disabled Unix
# password; please adapt to your needs
; add user script = /usr/sbin/adduser --quiet --disabled-password --gecos "" %u

# This allows machine accounts to be created on the domain controller via the 
# SAMR RPC pipe.  
# The following assumes a "machines" group exists on the system
; add machine script  = /usr/sbin/useradd -g machines -c "%u machine account" -d /var/lib/samba -s /bin/false %u

# This allows Unix groups to be created on the domain controller via the SAMR
# RPC pipe.  
; add group script = /usr/sbin/addgroup --force-badname %g

############ Misc ############

# Using the following line enables you to customise your configuration
# on a per machine basis. The %m gets replaced with the netbios name
# of the machine that is connecting
;   include = /home/samba/etc/smb.conf.%m

# Some defaults for winbind (make sure you're not using the ranges
# for something else.)
;   idmap uid = 10000-20000
;   idmap gid = 10000-20000
;   template shell = /bin/bash

# Setup usershare options to enable non-root users to share folders
# with the net usershare command.

# Maximum number of usershare. 0 (default) means that usershare is disabled.
;   usershare max shares = 100

# Allow users who've been granted usershare privileges to create
# public shares, not just authenticated ones
   usershare allow guests = yes

#======================= Share Definitions =======================

[homes]
   comment = Home Directories
   browseable = yes

# By default, the home directories are exported read-only. Change the
# next parameter to 'no' if you want to be able to write to them.
   read only = yes

# File creation mask is set to 0700 for security reasons. If you want to
# create files with group=rw permissions, set next parameter to 0775.
   create mask = 0700

# Directory creation mask is set to 0700 for security reasons. If you want to
# create dirs. with group=rw permissions, set next parameter to 0775.
   directory mask = 0700

# By default, \\server\username shares can be connected to by anyone
# with access to the samba server.
# The following parameter makes sure that only "username" can connect
# to \\server\username
# This might need tweaking when using external authentication schemes
   valid users = %S

# Un-comment the following and create the netlogon directory for Domain Logons
# (you need to configure Samba to act as a domain controller too.)
;[netlogon]
;   comment = Network Logon Service
;   path = /home/samba/netlogon
;   guest ok = yes
;   read only = yes

# Un-comment the following and create the profiles directory to store
# users profiles (see the "logon path" option above)
# (you need to configure Samba to act as a domain controller too.)
# The path below should be writable by all users so that their
# profile directory may be created the first time they log on
;[profiles]
;   comment = Users profiles
;   path = /home/samba/profiles
;   guest ok = no
;   browseable = no
;   create mask = 0600
;   directory mask = 0700

#[printers]
#   comment = All Printers
#   browseable = no
#   path = /var/spool/samba
#   printable = yes
#   guest ok = no
#   read only = yes
#   create mask = 0700

# Windows clients look for this share name as a source of downloadable
# printer drivers
#[print$]
#   comment = Printer Drivers
#   path = /var/lib/samba/printers
#   browseable = yes
#   read only = yes
#   guest ok = no
# Uncomment to allow remote administration of Windows print drivers.
# You may need to replace 'lpadmin' with the name of the group your
# admin users are members of.
# Please note that you also need to set appropriate Unix permissions
# to the drivers directory for these users to have write rights in it
;   write list = root, @lpadmin


[camera]
   comment= camera
#  path=/home/pi/FTP/files
   path=/
   browseable=Yes
   writeable=Yes
   only guest=no
   create mask=0777
   directory mask=0777
   public=no


[home]
 comment= home
 path=/home
 browseable=Yes
 writeable=Yes
 only guest=no
 create mask=0777
 directory mask=0777
 public=yes

[PI]
   comment=Totaal
   path=/
   browseable=Yes
   writeable=Yes
   only guest=no
   create mask=0777
   directory mask=0777
   public=no

Ik heb nog wat meer path's aangemaakt als test.

[wiz]

ik heb deze in mijn config staan, die zie ik bij jou niet.

 

 

[global]
   server string = %h
  

 

wellicht dat dat helpt?