Ga naar inhoud


PANIKS1

Lid
  • Items

    37
  • Registratiedatum

  • Laatst bezocht

Berichten die geplaatst zijn door PANIKS1

  1. Ik heb nog eens gezoccht naar wat emp info en daar vind ik exact de config zoals eerder gepost en de 1-8 uncommited config maar wellicht heb jij een ander model.

     

    Table 1: P.168 V1 / P.168-W V1

     

    Sat System A: committed A (1) uncommitted A (1)

    Sat System B: committed B (2) uncommitted A (1)

    Sat System C: committed C (3) uncommitted A (1)

    Sat System D: committed D (4) uncommitted A (1)

    Sat System E: committed A (1) uncommitted B (2)

    Sat System F: committed B (2) uncommitted B (2)

    Sat System G: committed C (3) uncommitted B (2)

    Sat System H: committed D (4) uncommitted B (2)

     

     

    Table 2: P.168 V2 / P.168-W V2

     

    Sat System A: committed none uncommitted 1

    Sat System B: committed none uncommitted 2

    Sat System C: committed none uncommitted 3

    Sat System D: committed none uncommitted 4

    Sat System E: committed none uncommitted 5

    Sat System F: committed none uncommitted 6

    Sat System G: committed none uncommitted 7

    Sat System H: committed none uncommitted 8

     

    Verder vind ik daar nog info waarbij gesteld wordt dat als je je config veranderd tussen diseqc 1.0,1.1 en 1.2 de switch gereset moet worden door hem spanningsloos te maken.

     

    Als je sat posities als hotbird met een dijk van een signaal kwijt raakt bij het instellen dan staat 1 van je parameters wel erg uit de richting (ik vermoed de skew).

     

  2. Hier een uitgewerkte voorbeeld.

     

    LNB1, Diseqc modus 1.1, Diseqc commando AA, Uncommitted input 1

    LNB2, Diseqc modus 1.1, Diseqc commando AB, Uncommitted input 1

    LNB3, Diseqc modus 1.1, Diseqc commando BA, Uncommitted input 1

    LNB4, Diseqc modus 1.1, Diseqc commando BB, Uncommitted input 1

    LNB5, Diseqc modus 1.1, Diseqc commando AA, Uncommitted input 2

    LNB6, Diseqc modus 1.1, Diseqc commando AB, Uncommitted input 2

    LNB7, Diseqc modus 1.1, Diseqc commando BA, Uncommitted input 2

    LNB8, Diseqc modus 1.1, Diseqc commando BB, Uncommitted input 2

     

    Commando volgorde: uncommitted,committed,toneburst

    Verder heb ik snelle diseqc en herhaal sequence op ja staan.

     

    Om te controleren of de schakeling werkt moet je de eerste keer na instellen naar een andere sat schakelen dan degene die net ingesteld is en dan terug naar gewenste sat om zeker te zijn dat de voledige diseqc riedel afgelopen wordt.

  3. Ik werk zelf met een losse 4/1 uncommited in cascade met 2* 4/1 committed (iets minder netjes afgewerkt). De 8/1 is een combinatie hiervan ik vermoed dat bij lnb 5 – 8 uncommited op input 2 gezet moet worden gevolgd door aa t/m bb, een ander optie is om alles met uncomitted te doen input 1 tot 8 (maar ik weet niet of dit op deze 8/1 werkt).

     

    5w is zeer sterk en 4w heeft ook nog veel zwakke transponders dus waarschijnlijk moet je dichter bij de 4 west gaan zitten.

     

    Verder complimenten voor je uitvoering en je uitgebreide documentatie

     

  4. @ appien of een ander met een 8/1 switch, ik ben inmiddels de hele dag bezig om mijn wavefrontier te koppelen met mijn draaibare schotel. Draaibaar op input 1 en de rest op input 2 t/m 6 van een EMP 8/1. De 2 t/m 6 (dis 1.1) lopen goed maar het lukt maar niet om de motor aan het draaien te krijgen op input 1 (dit alles gekoppeld aan een d7020).

     

    Mischien wil een van jullie zijn settings posten?

     

    Mijn settings zijn :

     

    inp1 ? sg2100 lnb0

    inp2 d1.1 a/b uncom 1 lnb1 w3a

    inp3 d1.1 b/a uncom 1 lnb2 hb

    inp4 d1.1 b/a uncom 1 lnb3 a1

    inp5 d1.1 a/a uncom 2 lnb4 a3

    inb6 d1.1 a/b uncom 2 lnb6 a2

     

    Alvast bedankt!

×
×
  • Nieuwe aanmaken...