nextkiller
-
Items
80 -
Registratiedatum
-
Laatst bezocht
Inhoudstype
Profielen
Forums
Store
Berichten die geplaatst zijn door nextkiller
-
-
ik zou dan zelf gaan denken aan de boordcomputer waar mogelijk een haarscheurtje in de printplaat zit..
-
dat is afhankelijk van welke serie kaart je hebt
wat zijn de eerste 4 cijfers van je kaart?
-
De gasmeter zelf hoeft niet vervangen te worden, alleen de doorlaat ventiel bij de gasmeter.
Er zit bij (de meeste??) gasmeters een ventiel dat de doorstroming naar het gebouw regelt. Zo hebben ze hier laatst een andere ventiel geplaatst omdat ze naar een andere druk waren gegaan.
-
de enige veilige zoekmachine is je eigen zoekmachine
-
laten we eerst maar eens beginnen met welke regio code je in je samsung(of andere standaard decoder) decoder moet doen?
in het topic van de link zit een driehoekje bij code, als je daarop klikt zie je ook regio 8888 (waarschijnlijk de jouwe)
-
durf ik niet te zeggen maar er hoeft vaak maar een hele korte dip in signaal sterkte te zijn om problemen te veroorzaken met opnames
-
het kan evt ook aan de signaal kwaliteit liggen,
ik heb dat hier nl ook op mijn dbox2 met bepaalde zenders.
als je ernaar kijkt zie je geen problemen maar soms mist ie een data pakket en dan is de stream heel kort onderbroken, dit vindt de opname applicatie niet zo grappig, bij mij breekt ie dan meestal af.
-
even voor de duidelijkheid:
als je in je mobiele telefoon meerdere nummers bij een sms zet verzendt deze ze ook 1 voor 1,
maar dit gebeurt tegenwoordig zo snel dat het misschien 15 seconden scheelt tussen de eerste en twaalfde ontvanger
-
Origineel bericht van: roxstarEven afhankelijk van de image die je gebruikt zou de kanalenlijst toch ook automatisch kunnen worden bijgewerkt zodra Ziggo iets aanpast?
Ik kan mij herinneren dat bij de oude dbox2 met neutrino het wel werkte.
Het in je Fav zetten is iets wat altijd handmatig moet gebeuren.
heb je hier toevallig een link van?
ik kan zoiets nl niet vinden in mijn image (sportster 1rc10) -
Hallo allen,
sinds ongeveer een week of zo heb ik dat bijna dagelijks (meestal 's nachts) alle kanalen (behalve die op de transponder waar ik naar kijk) verdwijnen en deze krijg ik ook niet terug zonder een reboot,
ik gebruik sportster 1 rc 10 i.c.m. newcs 1.60 en mgcamd (versie ontgaat me even)
weet iemand of dit aan de box ligt of aan ziggo/casema?
alvast bedankt,
groet,
nextkiller
-
Hierbij met een scan van 2 uur geleden
-
had liever dat ze film1 hadden opengegooid
zonde van de bandbreedte al die sport zooi
-
bij mij wordt het als het goed is allemaal door KPN zelf aangelegd
dus wat dat betreft hoop ik weinig problemen te ondervinden
wat ik alleen wel jammer vind is dat er maar weinig over te vinden is
-
bedankt voor de tip
gebruikte hiervoor altijd ngrab (in het illegaal gratis kijken tijdperk)
-
ik heb vandaag nieuwe multicam en cardreader binnen gehad,
aangesloten en geboot, werkte in een keer
na onderzoek van de oude multicam blijkt dat ergens een condensator ofzo "opgeblazen" is
bedankt voor alle hulp
-
bedankt voor de link,
helaas is die site nog maar weinig gebruikt en bevat dus maar weinig informatie
-
Hallo,
Ik kon geen juiste forum vinden (waarschijnlijk is die er wel maar ben ik gewoon dom
)Maar heeft er misschien iemand ervaring met KPN-Glasvezel aan huis en welke codering (irdeto2 of iets anders?) en standaard (dvb-c??) er gebruikt wordt voor digitale tv.
En welke decoder(s) er standaard ondersteund worden en welke er evt. nog meer zouden werken?
Ik krijg waarschijnlijk eind van het jaar KPN-Glasvezel aan huis dus wilde alvast wat informatie gaan verzamelen (de kpnglasvezel.nl site is nou niet bepaald handig)
Alvast bedankt,
Groet,
Nextkiller
-
misschien een beetje off-topic maar:
bevalt de dm8000hd een beetje? en krijg je hem makkelijk aan de praat met ziggo/casema (op het zender zoeken na maar daar heb ik dan een dbox voor om zelf lijsten te kunnen maken)
en wat heb je allemaal moeten doen om hem aan de praat te krijgen?
ik heb er wel interesse in maar vind hem (nog) vrij prijzig
-
ik zal het van de week wel proberen,
eerst maar eens die nieuwe onderdelen binnenkrijgen
-
ik heb vandaag een andere multicam en nieuwe cardreader besteld,
ik hoop ze begin volgende week dan binnen te hebben en verder te kunnen testen...
-
ja staat al geactiveerd
-
dit is de output op 357 (newcs config)
Code:[ 21:00:31 ] [ Loader ] Reset failed ...[ 21:00:31 ] [ Loader ] Reader type 4 on node /dev/tts/1[ 21:00:31 ] [ Dbox ] Opening device /dev/tts/1[ 21:00:31 ] [ Serial ] Communication mode: 8o2[ 21:00:31 ] [ Serial ] Adjusting to 1 stopbit[ 21:00:31 ] [ Dbox ] Setting Baud to 9600[ 21:00:32 ] [ Loader ] Reset failed ...[ 21:00:32 ] [ Loader ] Reader type 4 on node /dev/tts/1[ 21:00:32 ] [ Dbox ] Opening device /dev/tts/1[ 21:00:32 ] [ Serial ] Communication mode: 8o2[ 21:00:32 ] [ Serial ] Adjusting to 1 stopbit[ 21:00:32 ] [ Dbox ] Setting Baud to 9600[ 21:00:33 ] [ Loader ] Reset failed ...[ 21:00:33 ] [ Loader ] Reader type 4 on node /dev/tts/1[ 21:00:33 ] [ Dbox ] Opening device /dev/tts/1[ 21:00:33 ] [ Serial ] Communication mode: 8o2[ 21:00:33 ] [ Serial ] Adjusting to 1 stopbit[ 21:00:33 ] [ Dbox ] Setting Baud to 9600[ 21:00:34 ] [ Loader ] Reset failed ...[ 21:00:34 ] [ Loader ] Reader type 4 on node /dev/tts/1[ 21:00:34 ] [ Dbox ] Opening device /dev/tts/1[ 21:00:34 ] [ Serial ] Communication mode: 8o2[ 21:00:34 ] [ Serial ] Adjusting to 1 stopbit[ 21:00:34 ] [ Dbox ] Setting Baud to 9600[ 21:00:35 ] [ Loader ] Reset failed ...[ 21:00:35 ] [ Loader ] Reader type 4 on node /dev/tts/1[ 21:00:35 ] [ Dbox ] Opening device /dev/tts/1[ 21:00:35 ] [ Serial ] Communication mode: 8o2[ 21:00:35 ] [ Serial ] Adjusting to 1 stopbit[ 21:00:35 ] [ Dbox ] Setting Baud to 9600[ 21:00:36 ] [ Loader ] Reset failed ...[ 21:00:36 ] [ Loader ] Reader type 4 on node /dev/tts/1[ 21:00:36 ] [ Dbox ] Opening device /dev/tts/1[ 21:00:36 ] [ Serial ] Communication mode: 8o2[ 21:00:36 ] [ Serial ] Adjusting to 1 stopbit[ 21:00:36 ] [ Dbox ] Setting Baud to 9600[ 21:00:37 ] [ Loader ] Reset failed ...[ 21:00:37 ] [ Loader ] Reader type 4 on node /dev/tts/1[ 21:00:37 ] [ Dbox ] Opening device /dev/tts/1[ 21:00:37 ] [ Serial ] Communication mode: 8o2[ 21:00:37 ] [ Serial ] Adjusting to 1 stopbit[ 21:00:37 ] [ Dbox ] Setting Baud to 9600[ 21:00:38 ] [ Loader ] Reset failed ...[ 21:00:38 ] [ Loader ] Reader type 4 on node /dev/tts/1[ 21:00:38 ] [ Dbox ] Opening device /dev/tts/1[ 21:00:38 ] [ Serial ] Communication mode: 8o2[ 21:00:38 ] [ Serial ] Adjusting to 1 stopbit[ 21:00:38 ] [ Dbox ] Setting Baud to 9600[ 21:00:39 ] [ Loader ] Reset failed ...[ 21:00:39 ] [ Loader ] Reader type 4 on node /dev/tts/1[ 21:00:39 ] [ Dbox ] Opening device /dev/tts/1[ 21:00:39 ] [ Serial ] Communication mode: 8o2[ 21:00:39 ] [ Serial ] Adjusting to 1 stopbit[ 21:00:39 ] [ Dbox ] Setting Baud to 9600[ 21:00:40 ] [ Loader ] Reset failed ...[ 21:00:40 ] [ Loader ] Reader type 4 on node /dev/tts/1[ 21:00:40 ] [ Dbox ] Opening device /dev/tts/1[ 21:00:40 ] [ Serial ] Communication mode: 8o2[ 21:00:40 ] [ Serial ] Adjusting to 1 stopbit[ 21:00:40 ] [ Dbox ] Setting Baud to 9600[ 21:00:41 ] [ Loader ] Reset failed ...[ 21:00:41 ] [ Loader ] Reader type 4 on node /dev/tts/1[ 21:00:41 ] [ Dbox ] Opening device /dev/tts/1[ 21:00:41 ] [ Serial ] Communication mode: 8o2[ 21:00:41 ] [ Serial ] Adjusting to 1 stopbit[ 21:00:41 ] [ Dbox ] Setting Baud to 9600[ 21:00:42 ] [ Loader ] Reset failed ...[ 21:00:42 ] [ Loader ] Reader type 4 on node /dev/tts/1[ 21:00:42 ] [ Dbox ] Opening device /dev/tts/1[ 21:00:42 ] [ Serial ] Communication mode: 8o2[ 21:00:42 ] [ Serial ] Adjusting to 1 stopbit[ 21:00:42 ] [ Dbox ] Setting Baud to 9600[ 21:00:43 ] [ Loader ] Reset failed ...[ 21:00:43 ] [ Loader ] Reader type 4 on node /dev/tts/1[ 21:00:43 ] [ Dbox ] Opening device /dev/tts/1[ 21:00:43 ] [ Serial ] Communication mode: 8o2[ 21:00:43 ] [ Serial ] Adjusting to 1 stopbit[ 21:00:43 ] [ Dbox ] Setting Baud to 9600[ 21:00:44 ] [ Serial ] Read on fd 9 (len=5 timeout=5300ms)[ 21:00:44 ] Phoenix_read: 00 80 1F 00 3E[ 21:00:44 ] [ CardMan ] Atr header is 00 80 [NORMAL][ 21:00:44 ] [ Loader ] Unknown card[ 21:00:44 ] [ Loader ] Trying Irdeto (T=14)[ 21:00:44 ] [ Loader ] Reader type 4 on node /dev/tts/1[ 21:00:44 ] [ Dbox ] Opening device /dev/tts/1[ 21:00:44 ] [ Serial ] Communication mode: 8o2[ 21:00:44 ] [ Serial ] Adjusting to 1 stopbit[ 21:00:44 ] [ Dbox ] Setting Baud to 5713[ 21:00:45 ] [ Loader ] Reset failed ...[ 21:00:45 ] [ Loader ] Starting Newcamd Server on port 15000[ 21:00:45 ] [ Newcamd ] Newcamd thread Server started on port 15000[ 21:00:45 ] bind: error! 98: Address already in use[ 21:00:45 ] [ Newcamd ] Stopping port 15000[ 21:00:53 ] [ Loader ] Reader type 4 on node /dev/tts/1[ 21:00:53 ] [ Dbox ] Opening device /dev/tts/1[ 21:00:53 ] [ Serial ] Communication mode: 8o2[ 21:00:53 ] [ Serial ] Adjusting to 1 stopbit[ 21:00:53 ] [ Dbox ] Setting Baud to 5713[ 21:00:54 ] [ Loader ] Reset failed ...[ 21:00:54 ] [ Loader ] Reader type 4 on node /dev/tts/1[ 21:00:54 ] [ Dbox ] Opening device /dev/tts/1[ 21:00:54 ] [ Serial ] Communication mode: 8o2[ 21:00:54 ] [ Serial ] Adjusting to 1 stopbit[ 21:00:54 ] [ Dbox ] Setting Baud to 5713[ 21:00:55 ] [ Loader ] Reset failed ...[ 21:00:55 ] [ Loader ] Reader type 4 on node /dev/tts/1[ 21:00:55 ] [ Dbox ] Opening device /dev/tts/1[ 21:00:55 ] [ Serial ] Communication mode: 8o2[ 21:00:55 ] [ Serial ] Adjusting to 1 stopbit[ 21:00:55 ] [ Dbox ] Setting Baud to 5713[ 21:00:56 ] [ Loader ] Reset failed ...[ 21:00:56 ] [ Loader ] Reader type 4 on node /dev/tts/1[ 21:00:56 ] [ Dbox ] Opening device /dev/tts/1[ 21:00:56 ] [ Serial ] Communication mode: 8o2[ 21:00:56 ] [ Serial ] Adjusting to 1 stopbit[ 21:00:56 ] [ Dbox ] Setting Baud to 5713[ 21:00:57 ] [ Loader ] Reset failed ...[ 21:00:57 ] [ Loader ] Reader type 4 on node /dev/tts/1[ 21:00:57 ] [ Dbox ] Opening device /dev/tts/1[ 21:00:57 ] [ Serial ] Communication mode: 8o2[ 21:00:57 ] [ Serial ] Adjusting to 1 stopbit[ 21:00:57 ] [ Dbox ] Setting Baud to 5713[ 21:00:58 ] [ Loader ] Reset failed ...[ 21:00:58 ] [ Loader ] Reader type 4 on node /dev/tts/1[ 21:00:58 ] [ Dbox ] Opening device /dev/tts/1[ 21:00:58 ] [ Serial ] Communication mode: 8o2[ 21:00:58 ] [ Serial ] Adjusting to 1 stopbit[ 21:00:58 ] [ Dbox ] Setting Baud to 5713[ 21:00:59 ] [ Loader ] Reset failed ...[ 21:00:59 ] [ Loader ] Reader type 4 on node /dev/tts/1[ 21:00:59 ] [ Dbox ] Opening device /dev/tts/1[ 21:00:59 ] [ Serial ] Communication mode: 8o2[ 21:00:59 ] [ Serial ] Adjusting to 1 stopbit[ 21:00:59 ] [ Dbox ] Setting Baud to 5713[ 21:01:00 ] [ Loader ] Reset failed ...[ 21:01:00 ] [ Loader ] Reader type 4 on node /dev/tts/1[ 21:01:00 ] [ Dbox ] Opening device /dev/tts/1[ 21:01:00 ] [ Serial ] Communication mode: 8o2[ 21:01:00 ] [ Serial ] Adjusting to 1 stopbit[ 21:01:00 ] [ Dbox ] Setting Baud to 5713[ 21:01:01 ] [ Loader ] Reset failed ...[ 21:01:01 ] [ Loader ] Reader type 4 on node /dev/tts/1[ 21:01:01 ] [ Dbox ] Opening device /dev/tts/1[ 21:01:01 ] [ Serial ] Communication mode: 8o2[ 21:01:01 ] [ Serial ] Adjusting to 1 stopbit[ 21:01:01 ] [ Dbox ] Setting Baud to 5713[ 21:01:02 ] [ Serial ] Read on fd 9 (len=4 timeout=5300ms)[ 21:01:02 ] Phoenix_read: B1 80 00 00[ 21:01:02 ] [ CardMan ] Atr header is B1 80 [NORMAL][ 21:01:02 ] [ Loader ] Unknown card[ 21:01:02 ] [ Loader ] Trying Irdeto (T=14)[ 21:01:02 ] [ Loader ] Reader type 4 on node /dev/tts/1[ 21:01:02 ] [ Dbox ] Opening device /dev/tts/1[ 21:01:02 ] [ Serial ] Communication mode: 8o2[ 21:01:02 ] [ Serial ] Adjusting to 1 stopbit[ 21:01:02 ] [ Dbox ] Setting Baud to 5713[ 21:01:03 ] [ Loader ] Reset failed ...[ 21:01:09 ] [ Loader ] Reader type 4 on node /dev/tts/1[ 21:01:09 ] [ Dbox ] Opening device /dev/tts/1[ 21:01:09 ] [ Serial ] Communication mode: 8o2[ 21:01:09 ] [ Serial ] Adjusting to 1 stopbit[ 21:01:09 ] [ Dbox ] Setting Baud to 5713[ 21:01:10 ] [ Loader ] Reset failed ...[ 21:01:10 ] [ Loader ] Reader type 4 on node /dev/tts/1[ 21:01:10 ] [ Dbox ] Opening device /dev/tts/1[ 21:01:10 ] [ Serial ] Communication mode: 8o2[ 21:01:10 ] [ Serial ] Adjusting to 1 stopbit[ 21:01:10 ] [ Dbox ] Setting Baud to 5713[ 21:01:11 ] [ Loader ] Reset failed ...[ 21:01:11 ] [ Loader ] Reader type 4 on node /dev/tts/1[ 21:01:11 ] [ Dbox ] Opening device /dev/tts/1[ 21:01:11 ] [ Serial ] Communication mode: 8o2[ 21:01:11 ] [ Serial ] Adjusting to 1 stopbit[ 21:01:11 ] [ Dbox ] Setting Baud to 5713[ 21:01:12 ] [ Loader ] Reset failed ...[ 21:01:12 ] [ Loader ] Reader type 4 on node /dev/tts/1[ 21:01:12 ] [ Dbox ] Opening device /dev/tts/1[ 21:01:12 ] [ Serial ] Communication mode: 8o2[ 21:01:12 ] [ Serial ] Adjusting to 1 stopbit[ 21:01:12 ] [ Dbox ] Setting Baud to 5713[ 21:01:13 ] [ Loader ] Reset failed ...[ 21:01:13 ] [ Loader ] Reader type 4 on node /dev/tts/1[ 21:01:13 ] [ Dbox ] Opening device /dev/tts/1[ 21:01:13 ] [ Serial ] Communication mode: 8o2[ 21:01:13 ] [ Serial ] Adjusting to 1 stopbit[ 21:01:13 ] [ Dbox ] Setting Baud to 5713[ 21:01:14 ] [ Loader ] Reset failed ...[ 21:01:14 ] [ Loader ] Reader type 4 on node /dev/tts/1[ 21:01:14 ] [ Dbox ] Opening device /dev/tts/1[ 21:01:14 ] [ Serial ] Communication mode: 8o2[ 21:01:14 ] [ Serial ] Adjusting to 1 stopbit[ 21:01:14 ] [ Dbox ] Setting Baud to 5713[ 21:01:15 ] [ Loader ] Reset failed ...[ 21:01:15 ] [ Loader ] Reader type 4 on node /dev/tts/1[ 21:01:15 ] [ Dbox ] Opening device /dev/tts/1[ 21:01:15 ] [ Serial ] Communication mode: 8o2[ 21:01:15 ] [ Serial ] Adjusting to 1 stopbit[ 21:01:15 ] [ Dbox ] Setting Baud to 5713[ 21:01:16 ] [ Loader ] Reset failed ...[ 21:01:16 ] [ Loader ] Reader type 4 on node /dev/tts/1[ 21:01:16 ] [ Dbox ] Opening device /dev/tts/1[ 21:01:16 ] [ Serial ] Communication mode: 8o2[ 21:01:16 ] [ Serial ] Adjusting to 1 stopbit[ 21:01:16 ] [ Dbox ] Setting Baud to 5713[ 21:01:17 ] [ Loader ] Reset failed ...[ 21:01:17 ] [ Loader ] Reader type 4 on node /dev/tts/1[ 21:01:17 ] [ Dbox ] Opening device /dev/tts/1[ 21:01:17 ] [ Serial ] Communication mode: 8o2[ 21:01:17 ] [ Serial ] Adjusting to 1 stopbit[ 21:01:17 ] [ Dbox ] Setting Baud to 5713[ 21:01:18 ] [ Loader ] Reset failed ...[ 21:01:18 ] [ Loader ] Reader type 4 on node /dev/tts/1[ 21:01:18 ] [ Dbox ] Opening device /dev/tts/1[ 21:01:18 ] [ Serial ] Communication mode: 8o2[ 21:01:18 ] [ Serial ] Adjusting to 1 stopbit[ 21:01:18 ] [ Dbox ] Setting Baud to 5713[ 21:01:19 ] [ Loader ] Reset failed ...[ 21:01:19 ] [ Loader ] Reader type 4 on node /dev/tts/1[ 21:01:19 ] [ Dbox ] Opening device /dev/tts/1[ 21:01:19 ] [ Serial ] Communication mode: 8o2[ 21:01:19 ] [ Serial ] Adjusting to 1 stopbit[ 21:01:19 ] [ Dbox ] Setting Baud to 5713[ 21:01:20 ] [ Loader ] Reset failed ...[ 21:01:20 ] [ Loader ] Reader type 4 on node /dev/tts/1[ 21:01:20 ] [ Dbox ] Opening device /dev/tts/1[ 21:01:20 ] [ Serial ] Communication mode: 8o2[ 21:01:20 ] [ Serial ] Adjusting to 1 stopbit[ 21:01:20 ] [ Dbox ] Setting Baud to 5713[ 21:01:21 ] [ Loader ] Reset failed ...[ 21:01:21 ] [ Loader ] Reader type 4 on node /dev/tts/1[ 21:01:21 ] [ Dbox ] Opening device /dev/tts/1[ 21:01:21 ] [ Serial ] Communication mode: 8o2[ 21:01:21 ] [ Serial ] Adjusting to 1 stopbit[ 21:01:21 ] [ Dbox ] Setting Baud to 5713[ 21:01:22 ] [ Loader ] Reset failed ...[ 21:01:22 ] [ Loader ] Reader type 4 on node /dev/tts/1[ 21:01:22 ] [ Dbox ] Opening device /dev/tts/1[ 21:01:22 ] [ Serial ] Communication mode: 8o2[ 21:01:22 ] [ Serial ] Adjusting to 1 stopbit[ 21:01:22 ] [ Dbox ] Setting Baud to 5713[ 21:01:23 ] [ Loader ] Reset failed ...[ 21:01:23 ] [ Loader ] Reader type 4 on node /dev/tts/1[ 21:01:23 ] [ Dbox ] Opening device /dev/tts/1[ 21:01:23 ] [ Serial ] Communication mode: 8o2[ 21:01:23 ] [ Serial ] Adjusting to 1 stopbit[ 21:01:23 ] [ Dbox ] Setting Baud to 5713[ 21:01:24 ] [ Loader ] Reset failed ...[ 21:01:24 ] [ Loader ] Reader type 4 on node /dev/tts/1[ 21:01:24 ] [ Dbox ] Opening device /dev/tts/1[ 21:01:24 ] [ Serial ] Communication mode: 8o2[ 21:01:24 ] [ Serial ] Adjusting to 1 stopbit[ 21:01:24 ] [ Dbox ] Setting Baud to 5713[ 21:01:25 ] [ Loader ] Reset failed ...[ 21:01:25 ] [ Loader ] Reader type 4 on node /dev/tts/1[ 21:01:25 ] [ Dbox ] Opening device /dev/tts/1[ 21:01:25 ] [ Serial ] Communication mode: 8o2[ 21:01:25 ] [ Serial ] Adjusting to 1 stopbit[ 21:01:25 ] [ Dbox ] Setting Baud to 5713[ 21:01:26 ] [ Loader ] Reset failed ...[ 21:01:26 ] [ Loader ] Reader type 4 on node /dev/tts/1[ 21:01:26 ] [ Dbox ] Opening device /dev/tts/1[ 21:01:26 ] [ Serial ] Communication mode: 8o2[ 21:01:26 ] [ Serial ] Adjusting to 1 stopbit[ 21:01:26 ] [ Dbox ] Setting Baud to 5713[ 21:01:27 ] [ Loader ] Reset failed ...[ 21:01:27 ] [ Loader ] Reader type 4 on node /dev/tts/1[ 21:01:27 ] [ Dbox ] Opening device /dev/tts/1[ 21:01:27 ] [ Serial ] Communication mode: 8o2[ 21:01:27 ] [ Serial ] Adjusting to 1 stopbit[ 21:01:27 ] [ Dbox ] Setting Baud to 5713[ 21:01:28 ] [ Loader ] Reset failed ...[ 21:01:28 ] [ Loader ] Reader type 4 on node /dev/tts/1[ 21:01:28 ] [ Dbox ] Opening device /dev/tts/1[ 21:01:28 ] [ Serial ] Communication mode: 8o2[ 21:01:28 ] [ Serial ] Adjusting to 1 stopbit[ 21:01:28 ] [ Dbox ] Setting Baud to 5713[ 21:01:29 ] [ Loader ] Reset failed ...[ 21:01:29 ] [ Loader ] Reader type 4 on node /dev/tts/1[ 21:01:29 ] [ Dbox ] Opening device /dev/tts/1[ 21:01:29 ] [ Serial ] Communication mode: 8o2[ 21:01:29 ] [ Serial ] Adjusting to 1 stopbit[ 21:01:29 ] [ Dbox ] Setting Baud to 5713[ 21:01:30 ] [ Loader ] Reset failed ...[ 21:01:30 ] [ Loader ] Reader type 4 on node /dev/tts/1[ 21:01:30 ] [ Dbox ] Opening device /dev/tts/1[ 21:01:30 ] [ Serial ] Communication mode: 8o2[ 21:01:30 ] [ Serial ] Adjusting to 1 stopbit[ 21:01:30 ] [ Dbox ] Setting Baud to 5713[ 21:01:31 ] [ Serial ] Read on fd 9 (len=2 timeout=5300ms)[ 21:01:31 ] Phoenix_read: 00 FF[ 21:01:31 ] [ CardMan ] Atr header is 00 FF [NORMAL][ 21:01:31 ] [ Loader ] Unknown card[ 21:01:31 ] [ Loader ] Trying Irdeto (T=14)[ 21:01:31 ] [ Loader ] Reader type 4 on node /dev/tts/1[ 21:01:31 ] [ Dbox ] Opening device /dev/tts/1[ 21:01:31 ] [ Serial ] Communication mode: 8o2[ 21:01:31 ] [ Serial ] Adjusting to 1 stopbit[ 21:01:31 ] [ Dbox ] Setting Baud to 5713[ 21:01:32 ] [ Loader ] Reset failed ...
en dit is de output op 600 (newcs config):
Code:[ 21:04:01 ] [ Newcamd ] Newcamd thread Server started on port 15000[ 21:04:01 ] [ Loader ] Reader type 4 on node /dev/tts/1[ 21:04:01 ] [ Dbox ] Opening device /dev/tts/1[ 21:04:01 ] [ Serial ] Communication mode: 8o2[ 21:04:01 ] [ Serial ] Adjusting to 1 stopbit[ 21:04:01 ] [ Dbox ] Setting Baud to 16129[ 21:04:02 ] [ Loader ] Reset failed ...[ 21:04:02 ] [ Loader ] Reader type 4 on node /dev/tts/1[ 21:04:02 ] [ Dbox ] Opening device /dev/tts/1[ 21:04:02 ] [ Serial ] Communication mode: 8o2[ 21:04:02 ] [ Serial ] Adjusting to 1 stopbit[ 21:04:02 ] [ Dbox ] Setting Baud to 16129[ 21:04:03 ] [ Loader ] Reset failed ...[ 21:04:03 ] [ Loader ] Reader type 4 on node /dev/tts/1[ 21:04:03 ] [ Dbox ] Opening device /dev/tts/1[ 21:04:03 ] [ Serial ] Communication mode: 8o2[ 21:04:03 ] [ Serial ] Adjusting to 1 stopbit[ 21:04:03 ] [ Dbox ] Setting Baud to 16129[ 21:04:04 ] [ Loader ] Reset failed ...[ 21:04:04 ] [ Loader ] Reader type 4 on node /dev/tts/1[ 21:04:04 ] [ Dbox ] Opening device /dev/tts/1[ 21:04:04 ] [ Serial ] Communication mode: 8o2[ 21:04:04 ] [ Serial ] Adjusting to 1 stopbit[ 21:04:04 ] [ Dbox ] Setting Baud to 16129[ 21:04:05 ] [ Loader ] Reset failed ...[ 21:04:05 ] [ Loader ] Reader type 4 on node /dev/tts/1[ 21:04:05 ] [ Dbox ] Opening device /dev/tts/1[ 21:04:05 ] [ Serial ] Communication mode: 8o2[ 21:04:05 ] [ Serial ] Adjusting to 1 stopbit[ 21:04:05 ] [ Dbox ] Setting Baud to 16129[ 21:04:06 ] [ Loader ] Reset failed ...[ 21:04:06 ] [ Loader ] Reader type 4 on node /dev/tts/1[ 21:04:06 ] [ Dbox ] Opening device /dev/tts/1[ 21:04:06 ] [ Serial ] Communication mode: 8o2[ 21:04:06 ] [ Serial ] Adjusting to 1 stopbit[ 21:04:06 ] [ Dbox ] Setting Baud to 16129[ 21:04:07 ] [ Loader ] Reset failed ...[ 21:04:07 ] [ Loader ] Reader type 4 on node /dev/tts/1[ 21:04:07 ] [ Dbox ] Opening device /dev/tts/1[ 21:04:07 ] [ Serial ] Communication mode: 8o2[ 21:04:07 ] [ Serial ] Adjusting to 1 stopbit[ 21:04:07 ] [ Dbox ] Setting Baud to 16129[ 21:04:08 ] [ Serial ] Read on fd 9 (len=2 timeout=5300ms)[ 21:04:08 ] Phoenix_read: 00 FF[ 21:04:08 ] [ CardMan ] Atr header is 00 FF [NORMAL][ 21:04:08 ] [ Loader ] Unknown card[ 21:04:08 ] [ Loader ] Trying Irdeto (T=14)[ 21:04:08 ] [ Loader ] Reader type 4 on node /dev/tts/1[ 21:04:08 ] [ Dbox ] Opening device /dev/tts/1[ 21:04:08 ] [ Serial ] Communication mode: 8o2[ 21:04:08 ] [ Serial ] Adjusting to 1 stopbit[ 21:04:08 ] [ Dbox ] Setting Baud to 9600[ 21:04:09 ] [ Loader ] Reset failed ...[ 21:04:09 ] [ Loader ] Starting Newcamd Server on port 15000[ 21:04:09 ] [ Newcamd ] Newcamd thread Server started on port 15000[ 21:04:09 ] bind: error! 98: Address already in use[ 21:04:09 ] [ Newcamd ] Stopping port 15000resetReset reader 0: /dev/tts/1-> [ 21:04:21 ] [ Loader ] Reader type 4 on node /dev/tts/1[ 21:04:21 ] [ Dbox ] Opening device /dev/tts/1[ 21:04:21 ] [ Serial ] Communication mode: 8o2[ 21:04:21 ] [ Serial ] Adjusting to 1 stopbit[ 21:04:21 ] [ Dbox ] Setting Baud to 9600[ 21:04:21 ] [ Loader ] Reset failed ...[ 21:04:21 ] [ Loader ] Reader type 4 on node /dev/tts/1[ 21:04:21 ] [ Dbox ] Opening device /dev/tts/1[ 21:04:21 ] [ Serial ] Communication mode: 8o2[ 21:04:21 ] [ Serial ] Adjusting to 1 stopbit[ 21:04:21 ] [ Dbox ] Setting Baud to 9600[ 21:04:22 ] [ Loader ] Reset failed ...[ 21:04:22 ] [ Loader ] Reader type 4 on node /dev/tts/1[ 21:04:22 ] [ Dbox ] Opening device /dev/tts/1[ 21:04:22 ] [ Serial ] Communication mode: 8o2[ 21:04:22 ] [ Serial ] Adjusting to 1 stopbit[ 21:04:22 ] [ Dbox ] Setting Baud to 9600[ 21:04:23 ] [ Loader ] Reset failed ...[ 21:04:23 ] [ Loader ] Reader type 4 on node /dev/tts/1[ 21:04:23 ] [ Dbox ] Opening device /dev/tts/1[ 21:04:23 ] [ Serial ] Communication mode: 8o2[ 21:04:23 ] [ Serial ] Adjusting to 1 stopbit[ 21:04:23 ] [ Dbox ] Setting Baud to 9600[ 21:04:24 ] [ Loader ] Reset failed ...[ 21:04:24 ] [ Loader ] Reader type 4 on node /dev/tts/1[ 21:04:24 ] [ Dbox ] Opening device /dev/tts/1[ 21:04:24 ] [ Serial ] Communication mode: 8o2[ 21:04:24 ] [ Serial ] Adjusting to 1 stopbit[ 21:04:24 ] [ Dbox ] Setting Baud to 9600[ 21:04:25 ] [ Loader ] Reset failed ...[ 21:04:25 ] [ Loader ] Reader type 4 on node /dev/tts/1[ 21:04:25 ] [ Dbox ] Opening device /dev/tts/1[ 21:04:25 ] [ Serial ] Communication mode: 8o2[ 21:04:25 ] [ Serial ] Adjusting to 1 stopbit[ 21:04:25 ] [ Dbox ] Setting Baud to 9600[ 21:04:26 ] [ Loader ] Reset failed ...[ 21:04:26 ] [ Loader ] Reader type 4 on node /dev/tts/1[ 21:04:26 ] [ Dbox ] Opening device /dev/tts/1[ 21:04:26 ] [ Serial ] Communication mode: 8o2[ 21:04:26 ] [ Serial ] Adjusting to 1 stopbit[ 21:04:26 ] [ Dbox ] Setting Baud to 9600[ 21:04:27 ] [ Loader ] Reset failed ...[ 21:04:27 ] [ Loader ] Reader type 4 on node /dev/tts/1[ 21:04:27 ] [ Dbox ] Opening device /dev/tts/1[ 21:04:27 ] [ Serial ] Communication mode: 8o2[ 21:04:27 ] [ Serial ] Adjusting to 1 stopbit[ 21:04:27 ] [ Dbox ] Setting Baud to 9600[ 21:04:28 ] [ Serial ] Read on fd 9 (len=3 timeout=5300ms)[ 21:04:28 ] Phoenix_read: 00 FF FF[ 21:04:28 ] [ CardMan ] Atr header is 00 FF [NORMAL][ 21:04:28 ] [ Loader ] Unknown card[ 21:04:28 ] [ Loader ] Trying Irdeto (T=14)[ 21:04:28 ] [ Loader ] Reader type 4 on node /dev/tts/1[ 21:04:28 ] [ Dbox ] Opening device /dev/tts/1[ 21:04:28 ] [ Serial ] Communication mode: 8o2[ 21:04:28 ] [ Serial ] Adjusting to 1 stopbit[ 21:04:28 ] [ Dbox ] Setting Baud to 9600[ 21:04:29 ] [ Loader ] Reset failed ...resetReset reader 0: /dev/tts/1-> [ 21:04:39 ] [ Loader ] Reader type 4 on node /dev/tts/1[ 21:04:39 ] [ Dbox ] Opening device /dev/tts/1[ 21:04:39 ] [ Serial ] Communication mode: 8o2[ 21:04:39 ] [ Serial ] Adjusting to 1 stopbit[ 21:04:39 ] [ Dbox ] Setting Baud to 9600[ 21:04:39 ] [ Loader ] Reset failed ...[ 21:04:39 ] [ Loader ] Reader type 4 on node /dev/tts/1[ 21:04:39 ] [ Dbox ] Opening device /dev/tts/1[ 21:04:39 ] [ Serial ] Communication mode: 8o2[ 21:04:39 ] [ Serial ] Adjusting to 1 stopbit[ 21:04:39 ] [ Dbox ] Setting Baud to 9600[ 21:04:40 ] [ Loader ] Reset failed ...[ 21:04:40 ] [ Loader ] Reader type 4 on node /dev/tts/1[ 21:04:40 ] [ Dbox ] Opening device /dev/tts/1[ 21:04:40 ] [ Serial ] Communication mode: 8o2[ 21:04:40 ] [ Serial ] Adjusting to 1 stopbit[ 21:04:40 ] [ Dbox ] Setting Baud to 9600[ 21:04:41 ] [ Loader ] Reset failed ...[ 21:04:41 ] [ Loader ] Reader type 4 on node /dev/tts/1[ 21:04:41 ] [ Dbox ] Opening device /dev/tts/1[ 21:04:41 ] [ Serial ] Communication mode: 8o2[ 21:04:41 ] [ Serial ] Adjusting to 1 stopbit[ 21:04:41 ] [ Dbox ] Setting Baud to 9600[ 21:04:42 ] [ Loader ] Reset failed ...[ 21:04:42 ] [ Loader ] Reader type 4 on node /dev/tts/1[ 21:04:42 ] [ Dbox ] Opening device /dev/tts/1[ 21:04:42 ] [ Serial ] Communication mode: 8o2[ 21:04:42 ] [ Serial ] Adjusting to 1 stopbit[ 21:04:42 ] [ Dbox ] Setting Baud to 9600[ 21:04:43 ] [ Loader ] Reset failed ...[ 21:04:43 ] [ Loader ] Reader type 4 on node /dev/tts/1[ 21:04:43 ] [ Dbox ] Opening device /dev/tts/1[ 21:04:43 ] [ Serial ] Communication mode: 8o2[ 21:04:43 ] [ Serial ] Adjusting to 1 stopbit[ 21:04:43 ] [ Dbox ] Setting Baud to 9600[ 21:04:44 ] [ Serial ] Read on fd 9 (len=4 timeout=5300ms)[ 21:04:44 ] Phoenix_read: 00 FF FF FF[ 21:04:44 ] [ CardMan ] Atr header is 00 FF [NORMAL][ 21:04:44 ] [ Loader ] Unknown card[ 21:04:44 ] [ Loader ] Trying Irdeto (T=14)[ 21:04:44 ] [ Loader ] Reader type 4 on node /dev/tts/1[ 21:04:44 ] [ Dbox ] Opening device /dev/tts/1[ 21:04:44 ] [ Serial ] Communication mode: 8o2[ 21:04:44 ] [ Serial ] Adjusting to 1 stopbit[ 21:04:44 ] [ Dbox ] Setting Baud to 9600[ 21:04:45 ] [ Loader ] Reset failed ...
krijg op beide settings weinig nuttigs
ik trek dus de conclusie dat of de kaart zelf kapot is (kan wel gewoon uitgelezen worden met samsung decoder dus lijkt me onwaarschijnlijk) of de card-reader of de multicam kapot is..
is er eventueel iemand die meer ervaring heeft met een dbox2 die in de omgeving van utrecht woont die mij hiermee kan helpen?
-
ik heb mijn multicam nu op 6 mhz staan (heb helaas geen automaat)
ik heb de mijn op 1+3 en 4+6 (dus zelfde als de jouwe)
ik heb er een schone image van sportster op staan
bij mijn weten zit de multicam er goed in en is het solderen goed gegaan.
de kaart schuif ik er wel goed in.
heb de door jouw geposte executables en configs gebruikt
dat er verschillen zijn had ik al opgemerkt zou alleen niet weten waar ik moet beginnen met het uitzoeken waarom dit gebeurt, misschien dat iemand mij in de juiste richting kan wijzen?
alvast bedankt,
Groet,
Nextkiller
-
Hij leest de kaart nog steeds niet goed uit,
onderstaande is een stuk van de log (telnet slaat helaas niet alles op)
Code:[ 22:48:29 ] [ Dbox ] Opening device /dev/tts/1[ 22:48:29 ] [ Serial ] Communication mode: 8o2[ 22:48:29 ] [ Serial ] Adjusting to 1 stopbit[ 22:48:29 ] [ Dbox ] Setting Baud to 9600[ 22:48:30 ] [ Loader ] Reset failed ...[ 22:48:30 ] [ Loader ] Reader type 4 on node /dev/tts/1[ 22:48:30 ] [ Dbox ] Opening device /dev/tts/1[ 22:48:30 ] [ Serial ] Communication mode: 8o2[ 22:48:30 ] [ Serial ] Adjusting to 1 stopbit[ 22:48:30 ] [ Dbox ] Setting Baud to 9600[ 22:48:31 ] [ Loader ] Reset failed ...[ 22:48:31 ] [ Loader ] Reader type 4 on node /dev/tts/1[ 22:48:31 ] [ Dbox ] Opening device /dev/tts/1[ 22:48:31 ] [ Serial ] Communication mode: 8o2[ 22:48:31 ] [ Serial ] Adjusting to 1 stopbit[ 22:48:31 ] [ Dbox ] Setting Baud to 9600[ 22:48:32 ] [ Loader ] Reset failed ...[ 22:48:32 ] [ Loader ] Reader type 4 on node /dev/tts/1[ 22:48:32 ] [ Dbox ] Opening device /dev/tts/1[ 22:48:32 ] [ Serial ] Communication mode: 8o2[ 22:48:32 ] [ Serial ] Adjusting to 1 stopbit[ 22:48:32 ] [ Dbox ] Setting Baud to 9600[ 22:48:33 ] [ Loader ] Reset failed ...[ 22:48:33 ] [ Loader ] Reader type 4 on node /dev/tts/1[ 22:48:33 ] [ Dbox ] Opening device /dev/tts/1[ 22:48:33 ] [ Serial ] Communication mode: 8o2[ 22:48:33 ] [ Serial ] Adjusting to 1 stopbit[ 22:48:33 ] [ Dbox ] Setting Baud to 9600[ 22:48:34 ] [ Loader ] Reset failed ...[ 22:48:34 ] [ Loader ] Reader type 4 on node /dev/tts/1[ 22:48:34 ] [ Dbox ] Opening device /dev/tts/1[ 22:48:34 ] [ Serial ] Communication mode: 8o2[ 22:48:34 ] [ Serial ] Adjusting to 1 stopbit[ 22:48:34 ] [ Dbox ] Setting Baud to 9600[ 22:48:35 ] [ Loader ] Reset failed ...[ 22:48:35 ] [ Loader ] Reader type 4 on node /dev/tts/1[ 22:48:35 ] [ Dbox ] Opening device /dev/tts/1[ 22:48:35 ] [ Serial ] Communication mode: 8o2[ 22:48:35 ] [ Serial ] Adjusting to 1 stopbit[ 22:48:35 ] [ Dbox ] Setting Baud to 9600[ 22:48:36 ] [ Serial ] Read on fd 9 (len=1 timeout=5300ms)[ 22:48:36 ] Phoenix_read: E0[ 22:48:36 ] [ CardMan ] Atr header is E0 00 [NORMAL][ 22:48:36 ] [ Loader ] Unknown card[ 22:48:36 ] [ Loader ] Trying Irdeto (T=14)[ 22:48:36 ] [ Loader ] Reader type 4 on node /dev/tts/1[ 22:48:36 ] [ Dbox ] Opening device /dev/tts/1[ 22:48:36 ] [ Serial ] Communication mode: 8o2[ 22:48:36 ] [ Serial ] Adjusting to 1 stopbit[ 22:48:36 ] [ Dbox ] Setting Baud to 9600[ 22:48:37 ] [ Loader ] Reset failed ...resetReset reader 0: /dev/tts/1-> [ 22:48:45 ] [ Loader ] Reader type 4 on node /dev/tts/1[ 22:48:45 ] [ Dbox ] Opening device /dev/tts/1[ 22:48:45 ] [ Serial ] Communication mode: 8o2[ 22:48:45 ] [ Serial ] Adjusting to 1 stopbit[ 22:48:45 ] [ Dbox ] Setting Baud to 9600[ 22:48:46 ] [ Loader ] Reset failed ...[ 22:48:46 ] [ Loader ] Reader type 4 on node /dev/tts/1[ 22:48:46 ] [ Dbox ] Opening device /dev/tts/1[ 22:48:46 ] [ Serial ] Communication mode: 8o2[ 22:48:46 ] [ Serial ] Adjusting to 1 stopbit[ 22:48:46 ] [ Dbox ] Setting Baud to 9600[ 22:48:47 ] [ Loader ] Reset failed ...[ 22:48:47 ] [ Loader ] Reader type 4 on node /dev/tts/1[ 22:48:47 ] [ Dbox ] Opening device /dev/tts/1[ 22:48:47 ] [ Serial ] Communication mode: 8o2[ 22:48:47 ] [ Serial ] Adjusting to 1 stopbit[ 22:48:47 ] [ Dbox ] Setting Baud to 9600[ 22:48:48 ] [ Loader ] Reset failed ...[ 22:48:48 ] [ Loader ] Reader type 4 on node /dev/tts/1[ 22:48:48 ] [ Dbox ] Opening device /dev/tts/1[ 22:48:48 ] [ Serial ] Communication mode: 8o2[ 22:48:48 ] [ Serial ] Adjusting to 1 stopbit[ 22:48:48 ] [ Dbox ] Setting Baud to 9600[ 22:48:49 ] [ Loader ] Reset failed ...[ 22:48:49 ] [ Loader ] Reader type 4 on node /dev/tts/1[ 22:48:49 ] [ Dbox ] Opening device /dev/tts/1[ 22:48:49 ] [ Serial ] Communication mode: 8o2[ 22:48:49 ] [ Serial ] Adjusting to 1 stopbit[ 22:48:49 ] [ Dbox ] Setting Baud to 9600[ 22:48:50 ] [ Loader ] Reset failed ...[ 22:48:50 ] [ Loader ] Reader type 4 on node /dev/tts/1[ 22:48:50 ] [ Dbox ] Opening device /dev/tts/1[ 22:48:50 ] [ Serial ] Communication mode: 8o2[ 22:48:50 ] [ Serial ] Adjusting to 1 stopbit[ 22:48:50 ] [ Dbox ] Setting Baud to 9600[ 22:48:51 ] [ Loader ] Reset failed ...[ 22:48:51 ] [ Loader ] Reader type 4 on node /dev/tts/1[ 22:48:51 ] [ Dbox ] Opening device /dev/tts/1[ 22:48:51 ] [ Serial ] Communication mode: 8o2[ 22:48:51 ] [ Serial ] Adjusting to 1 stopbit[ 22:48:51 ] [ Dbox ] Setting Baud to 9600[ 22:48:52 ] [ Serial ] Read on fd 9 (len=3 timeout=5300ms)[ 22:48:52 ] Phoenix_read: 00 FE FF[ 22:48:52 ] [ CardMan ] Atr header is 00 FE [NORMAL][ 22:48:52 ] [ Loader ] Unknown card[ 22:48:52 ] [ Loader ] Trying Irdeto (T=14)[ 22:48:52 ] [ Loader ] Reader type 4 on node /dev/tts/1[ 22:48:52 ] [ Dbox ] Opening device /dev/tts/1[ 22:48:52 ] [ Serial ] Communication mode: 8o2[ 22:48:52 ] [ Serial ] Adjusting to 1 stopbit[ 22:48:52 ] [ Dbox ] Setting Baud to 9600[ 22:48:53 ] [ Loader ] Reset failed ...resetReset reader 0: /dev/tts/1-> [ 22:48:58 ] [ Loader ] Reader type 4 on node /dev/tts/1[ 22:48:58 ] [ Dbox ] Opening device /dev/tts/1[ 22:48:58 ] [ Serial ] Communication mode: 8o2[ 22:48:58 ] [ Serial ] Adjusting to 1 stopbit[ 22:48:58 ] [ Dbox ] Setting Baud to 9600[ 22:48:59 ] [ Loader ] Reset failed ...[ 22:48:59 ] [ Loader ] Reader type 4 on node /dev/tts/1[ 22:48:59 ] [ Dbox ] Opening device /dev/tts/1[ 22:48:59 ] [ Serial ] Communication mode: 8o2[ 22:48:59 ] [ Serial ] Adjusting to 1 stopbit[ 22:48:59 ] [ Dbox ] Setting Baud to 9600[ 22:49:00 ] [ Loader ] Reset failed ...[ 22:49:00 ] [ Loader ] Reader type 4 on node /dev/tts/1[ 22:49:00 ] [ Dbox ] Opening device /dev/tts/1[ 22:49:00 ] [ Serial ] Communication mode: 8o2[ 22:49:00 ] [ Serial ] Adjusting to 1 stopbit[ 22:49:00 ] [ Dbox ] Setting Baud to 9600[ 22:49:01 ] [ Loader ] Reset failed ...[ 22:49:01 ] [ Loader ] Reader type 4 on node /dev/tts/1[ 22:49:01 ] [ Dbox ] Opening device /dev/tts/1[ 22:49:01 ] [ Serial ] Communication mode: 8o2[ 22:49:01 ] [ Serial ] Adjusting to 1 stopbit[ 22:49:01 ] [ Dbox ] Setting Baud to 9600[ 22:49:02 ] [ Loader ] Reset failed ...[ 22:49:02 ] [ Loader ] Reader type 4 on node /dev/tts/1[ 22:49:02 ] [ Dbox ] Opening device /dev/tts/1[ 22:49:02 ] [ Serial ] Communication mode: 8o2[ 22:49:02 ] [ Serial ] Adjusting to 1 stopbit[ 22:49:02 ] [ Dbox ] Setting Baud to 9600[ 22:49:03 ] [ Loader ] Reset failed ...[ 22:49:03 ] [ Loader ] Reader type 4 on node /dev/tts/1[ 22:49:03 ] [ Dbox ] Opening device /dev/tts/1[ 22:49:03 ] [ Serial ] Communication mode: 8o2[ 22:49:03 ] [ Serial ] Adjusting to 1 stopbit[ 22:49:03 ] [ Dbox ] Setting Baud to 9600[ 22:49:04 ] [ Serial ] Read on fd 9 (len=1 timeout=5300ms)[ 22:49:04 ] Phoenix_read: F8[ 22:49:04 ] [ CardMan ] Atr header is F8 00 [NORMAL][ 22:49:04 ] [ Loader ] Unknown card[ 22:49:04 ] [ Loader ] Trying Irdeto (T=14)[ 22:49:04 ] [ Loader ] Reader type 4 on node /dev/tts/1[ 22:49:04 ] [ Dbox ] Opening device /dev/tts/1[ 22:49:04 ] [ Serial ] Communication mode: 8o2[ 22:49:04 ] [ Serial ] Adjusting to 1 stopbit[ 22:49:04 ] [ Dbox ] Setting Baud to 9600[ 22:49:05 ] [ Loader ] Reset failed ...resetReset reader 0: /dev/tts/1-> [ 22:49:12 ] [ Loader ] Reader type 4 on node /dev/tts/1[ 22:49:12 ] [ Dbox ] Opening device /dev/tts/1[ 22:49:12 ] [ Serial ] Communication mode: 8o2[ 22:49:12 ] [ Serial ] Adjusting to 1 stopbit[ 22:49:12 ] [ Dbox ] Setting Baud to 9600[ 22:49:13 ] [ Loader ] Reset failed ...[ 22:49:13 ] [ Loader ] Reader type 4 on node /dev/tts/1[ 22:49:13 ] [ Dbox ] Opening device /dev/tts/1[ 22:49:13 ] [ Serial ] Communication mode: 8o2[ 22:49:13 ] [ Serial ] Adjusting to 1 stopbit[ 22:49:13 ] [ Dbox ] Setting Baud to 9600[ 22:49:14 ] [ Loader ] Reset failed ...[ 22:49:14 ] [ Loader ] Reader type 4 on node /dev/tts/1[ 22:49:14 ] [ Dbox ] Opening device /dev/tts/1[ 22:49:14 ] [ Serial ] Communication mode: 8o2[ 22:49:14 ] [ Serial ] Adjusting to 1 stopbit[ 22:49:14 ] [ Dbox ] Setting Baud to 9600[ 22:49:15 ] [ Loader ] Reset failed ...[ 22:49:15 ] [ Loader ] Reader type 4 on node /dev/tts/1[ 22:49:15 ] [ Dbox ] Opening device /dev/tts/1[ 22:49:15 ] [ Serial ] Communication mode: 8o2[ 22:49:15 ] [ Serial ] Adjusting to 1 stopbit[ 22:49:15 ] [ Dbox ] Setting Baud to 9600[ 22:49:16 ] [ Loader ] Reset failed ...[ 22:49:16 ] [ Loader ] Reader type 4 on node /dev/tts/1[ 22:49:16 ] [ Dbox ] Opening device /dev/tts/1[ 22:49:16 ] [ Serial ] Communication mode: 8o2[ 22:49:16 ] [ Serial ] Adjusting to 1 stopbit[ 22:49:16 ] [ Dbox ] Setting Baud to 9600[ 22:49:17 ] [ Loader ] Reset failed ...[ 22:49:17 ] [ Loader ] Reader type 4 on node /dev/tts/1[ 22:49:17 ] [ Dbox ] Opening device /dev/tts/1[ 22:49:17 ] [ Serial ] Communication mode: 8o2[ 22:49:17 ] [ Serial ] Adjusting to 1 stopbit[ 22:49:17 ] [ Dbox ] Setting Baud to 9600[ 22:49:18 ] [ Loader ] Reset failed ...[ 22:49:18 ] [ Loader ] Reader type 4 on node /dev/tts/1[ 22:49:18 ] [ Dbox ] Opening device /dev/tts/1[ 22:49:18 ] [ Serial ] Communication mode: 8o2[ 22:49:18 ] [ Serial ] Adjusting to 1 stopbit[ 22:49:18 ] [ Dbox ] Setting Baud to 9600[ 22:49:19 ] [ Loader ] Reset failed ...[ 22:49:19 ] [ Loader ] Reader type 4 on node /dev/tts/1[ 22:49:19 ] [ Dbox ] Opening device /dev/tts/1[ 22:49:19 ] [ Serial ] Communication mode: 8o2[ 22:49:19 ] [ Serial ] Adjusting to 1 stopbit[ 22:49:19 ] [ Dbox ] Setting Baud to 9600[ 22:49:20 ] [ Loader ] Reset failed ...[ 22:49:20 ] [ Loader ] Reader type 4 on node /dev/tts/1[ 22:49:20 ] [ Dbox ] Opening device /dev/tts/1[ 22:49:20 ] [ Serial ] Communication mode: 8o2[ 22:49:20 ] [ Serial ] Adjusting to 1 stopbit[ 22:49:20 ] [ Dbox ] Setting Baud to 9600[ 22:49:21 ] [ Loader ] Reset failed ...[ 22:49:21 ] [ Loader ] Reader type 4 on node /dev/tts/1[ 22:49:21 ] [ Dbox ] Opening device /dev/tts/1[ 22:49:21 ] [ Serial ] Communication mode: 8o2[ 22:49:21 ] [ Serial ] Adjusting to 1 stopbit[ 22:49:21 ] [ Dbox ] Setting Baud to 9600[ 22:49:22 ] [ Loader ] Reset failed ...[ 22:49:22 ] [ Loader ] Reader type 4 on node /dev/tts/1[ 22:49:22 ] [ Dbox ] Opening device /dev/tts/1[ 22:49:22 ] [ Serial ] Communication mode: 8o2[ 22:49:22 ] [ Serial ] Adjusting to 1 stopbit[ 22:49:22 ] [ Dbox ] Setting Baud to 9600[ 22:49:23 ] [ Serial ] Read on fd 9 (len=6 timeout=5300ms)[ 22:49:23 ] Phoenix_read: 00 D0 00 3C 6E 84[ 22:49:23 ] [ CardMan ] Atr header is 00 D0 [NORMAL][ 22:49:23 ] [ Loader ] Unknown card[ 22:49:23 ] [ Loader ] Trying Irdeto (T=14)[ 22:49:23 ] [ Loader ] Reader type 4 on node /dev/tts/1[ 22:49:23 ] [ Dbox ] Opening device /dev/tts/1[ 22:49:23 ] [ Serial ] Communication mode: 8o2[ 22:49:23 ] [ Serial ] Adjusting to 1 stopbit[ 22:49:23 ] [ Dbox ] Setting Baud to 9600[ 22:49:24 ] [ Loader ] Reset failed ...resetReset reader 0: /dev/tts/1-> [ 22:49:35 ] [ Loader ] Reader type 4 on node /dev/tts/1[ 22:49:35 ] [ Dbox ] Opening device /dev/tts/1[ 22:49:35 ] [ Serial ] Communication mode: 8o2[ 22:49:35 ] [ Serial ] Adjusting to 1 stopbit[ 22:49:35 ] [ Dbox ] Setting Baud to 9600[ 22:49:36 ] [ Loader ] Reset failed ...[ 22:49:36 ] [ Loader ] Reader type 4 on node /dev/tts/1[ 22:49:36 ] [ Dbox ] Opening device /dev/tts/1[ 22:49:36 ] [ Serial ] Communication mode: 8o2[ 22:49:36 ] [ Serial ] Adjusting to 1 stopbit[ 22:49:36 ] [ Dbox ] Setting Baud to 9600[ 22:49:37 ] [ Loader ] Reset failed ...[ 22:49:37 ] [ Loader ] Reader type 4 on node /dev/tts/1[ 22:49:37 ] [ Dbox ] Opening device /dev/tts/1[ 22:49:37 ] [ Serial ] Communication mode: 8o2[ 22:49:37 ] [ Serial ] Adjusting to 1 stopbit[ 22:49:37 ] [ Dbox ] Setting Baud to 9600[ 22:49:38 ] [ Loader ] Reset failed ...[ 22:49:38 ] [ Loader ] Reader type 4 on node /dev/tts/1[ 22:49:38 ] [ Dbox ] Opening device /dev/tts/1[ 22:49:38 ] [ Serial ] Communication mode: 8o2[ 22:49:38 ] [ Serial ] Adjusting to 1 stopbit[ 22:49:38 ] [ Dbox ] Setting Baud to 9600[ 22:49:39 ] [ Loader ] Reset failed ...[ 22:49:39 ] [ Loader ] Reader type 4 on node /dev/tts/1[ 22:49:39 ] [ Dbox ] Opening device /dev/tts/1[ 22:49:39 ] [ Serial ] Communication mode: 8o2[ 22:49:39 ] [ Serial ] Adjusting to 1 stopbit[ 22:49:39 ] [ Dbox ] Setting Baud to 9600[ 22:49:40 ] [ Loader ] Reset failed ...[ 22:49:40 ] [ Loader ] Reader type 4 on node /dev/tts/1[ 22:49:40 ] [ Dbox ] Opening device /dev/tts/1[ 22:49:40 ] [ Serial ] Communication mode: 8o2[ 22:49:40 ] [ Serial ] Adjusting to 1 stopbit[ 22:49:40 ] [ Dbox ] Setting Baud to 9600[ 22:49:41 ] [ Loader ] Reset failed ...[ 22:49:41 ] [ Loader ] Reader type 4 on node /dev/tts/1[ 22:49:41 ] [ Dbox ] Opening device /dev/tts/1[ 22:49:41 ] [ Serial ] Communication mode: 8o2[ 22:49:41 ] [ Serial ] Adjusting to 1 stopbit[ 22:49:41 ] [ Dbox ] Setting Baud to 9600[ 22:49:42 ] [ Loader ] Reset failed ...[ 22:49:42 ] [ Loader ] Reader type 4 on node /dev/tts/1[ 22:49:42 ] [ Dbox ] Opening device /dev/tts/1[ 22:49:42 ] [ Serial ] Communication mode: 8o2[ 22:49:42 ] [ Serial ] Adjusting to 1 stopbit[ 22:49:42 ] [ Dbox ] Setting Baud to 9600[ 22:49:43 ] [ Serial ] Read on fd 9 (len=2 timeout=5300ms)[ 22:49:43 ] Phoenix_read: 00 CC[ 22:49:43 ] [ CardMan ] Atr header is 00 CC [NORMAL][ 22:49:43 ] [ Loader ] Unknown card[ 22:49:43 ] [ Loader ] Trying Irdeto (T=14)[ 22:49:43 ] [ Loader ] Reader type 4 on node /dev/tts/1[ 22:49:43 ] [ Dbox ] Opening device /dev/tts/1[ 22:49:43 ] [ Serial ] Communication mode: 8o2[ 22:49:43 ] [ Serial ] Adjusting to 1 stopbit[ 22:49:43 ] [ Dbox ] Setting Baud to 9600[ 22:49:44 ] [ Loader ] Reset failed ...
Ik gebruik de interne kaart lezer met een multicam
Zou het raadzaam zijn om een cardreader te nemen die op de seriele poort aangesloten kan worden? en zo ja wat voor een moet ik dan kopen?
Mochten er geen externe cardreaders op aangesloten kunnen worden zou het handig zijn om een nieuwe interne kaartlezer + multicam te bestellen dat een van deze twee mogelijk kapot zijn?
Ook heb ik weleens dat wanneer ik de stekker eruit gehaald heb en ik de dbox2 weer aanzet dat bij het "booten" tijdens het bericht "lade" die regel ineens 2/3 zwart wordt en niet meer reageert. Weten jullie wat dit is? De enige oplossing die ik heb is om hem een hele tijd van het stroom te houden en daarna weer aan te sluiten en dan start ie weer op.
Groet,
Nextkiller
)
2 miljoen berichten op sat4all.com!
in Off topic
Geplaatst:
gefeliciteerd