WIFI werkt niet in Poseidon

[Dream1975]

Helaas, deze werken ook niet. De box start nu wel gewoon op en de signaalmeters geven signaal, maar als ik met mijn computer verbinding ga maken met de box slaat hij weer vast. Enkel een harde reset brengt hem dan weer tot leven.

[Gast]

heb hier ook het zelfde probleem.

denk dat we gewoon moeten w8 op versie 1.3

gewoon nog ff afw8ten <img src="/ubbthreads/images/graemlins/xyxthumbs.gif" alt="" /> <img src="/ubbthreads/images/graemlins/xyxthumbs.gif" alt="" />

[dAF2000]

Ik heb 't doorgeven aan lololuy die de wifi drivers compileert. De drivers komen van hem en de plugin van mij...

 

Bedankt voor het testen overigens! Als 't allemaal werkt komt er een v1.2.1 uit en vast nog wel een v2.0 voor 1.09 images... pfff <img src="/ubbthreads/images/graemlins/loldev.gif" alt="" />

 

EDIT:

 

Willen jullie dit nog proberen?

insmod /var/wifi/p80211.ko en

insmod /var/wifi/prism2_usb.ko prism2_doreset=1

 

En dan de eventuele foutmeldingen die je dan krijgt hier posten? Kijk ook even met "dmesg" in telnet of er ergens onderaan iets staat wat op wifi slaat.

[Dream1975]

~ > insmod /var/wifi/p80211.ko

Using /var/wifi/p80211.ko

~ > insmod /var/wifi/prism2_usb.ko prism2_doreset=1

Using /var/wifi/prism2_usb.ko

~ > dmesg

Linux version 2.6.9 (ghost@Client) (gcc version 3.4.3)

T 2004

On node 0 totalpages: 8192

DMA zone: 8192 pages, LIFO batch:2

Normal zone: 0 pages, LIFO batch:1

HighMem zone: 0 pages, LIFO batch:1

Built 1 zonelists

Kernel command line: console=null root=/dev/mtdblock5 rootfstype=squashfs ro

PID hash table entries: 256 (order: 8, 4096 bytes)

Console: colour dummy device 80x25

Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)

Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)

Memory: 29952k available (1888k kernel code, 512k data, 80k init, 0k

Calibrating delay loop... 250.88 BogoMIPS (lpj=125440)

Mount-cache hash table entries: 512 (order: 0, 4096 bytes)

NET: Registered protocol family 16

SCSI subsystem initialized

usbcore: registered new driver usbfs

usbcore: registered new driver hub

devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)

devfs: boot_options: 0x1

JFFS2 version 2.2. © 2001-2003 Red Hat, Inc.

Serial: 8250/16550 driver $Revision: 1.90 $ 7 ports, IRQ sharing disabled

ttyS0 at MMIO 0x0 (irq = 20) is a 16550A

ttyS1 at MMIO 0x0 (irq = 21)

ttyS2 at MMIO 0x0 (irq = 31) is a 16550A

loop: loaded (max 8 devices)

smc91x.c: v1.1, sep 22 2004 by Nicolas Pitre <nico@cam.org>

eth0: SMC91C11xFD (rev 1) at 0xc306a300 IRQ 28 [nowait]

eth0: Ethernet addr: 00:09:34:0f:e7:05

eth0: PHY LAN83C183 (LAN91C111 Internal)

Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2

ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx

IBM STB04xxx IDE driver version 2.0

setup bus 0

Probing IDE interface ide0...

hda: ST340015A, ATA DISK drive

Unhandled interrupt 19, disabled

set drive!

Using deadline io scheduler

ide0 at 0xc306c1f8-0xc306c1ff,0xc306c1f6 on irq 25

hda: max request size: 128KiB

hda: 78165360 sectors (40020 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(33)

hda: cache flushes supported

/dev/ide/host0/bus0/target0/lun0: p1

dreambox: flash mapping: 800000 at 7f800000

DreamBOX rev3+: Found 1 x16 devices at 0x0 in 16-bit bank

Intel/Sharp Extended Query Table at 0x0031

cfi_cmdset_0001: Erase suspend on write enabled

0: offset=0x0,size=0x20000,b

Using buffer write method

disable flash VPP

Creating 7 MTD partitions on "DreamBOX rev3+":

0x00000000-0x00600000 : "DreamBOX cramfs+squashfs"

0x00600000-0x007c0000 : "DreamBOX jffs2"

0x007c0000-0x00800000 : "DreamBOX OpenBIOS"

0x00000000-0x007c0000 : "DreamBOX (w/o bootloader)"

0x00000000-0x00800000 : "DreamBOX (w/ bootloader)"

0x00120000-0x00600000 : "DreamBOX SquashedFS"

0x00000000-0x00120000 : "DreamBOX Cramfs"

drivers/usb/host/ohci-ocp.c: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) D

river (OCP)

drivers/usb/host/ohci-ocp.c: block sizes: ed 64 td 64

drivers/usb/host/ohci-ocp.c: starting OCP OHCI USB Controller

drivers/usb/host/ohci-ocp.c: ocp_ohci (OCP OHCI) at 0xe0010000, irq 18

ocp-ohci 07: new USB bus registered, assigned bus number 1

hub 1-0:1.0: USB hub found

hub 1-0:1.0: 2 ports detected

Initializing USB Mass Storage driver...

usbcore: registered new driver usb-storage

USB Mass Storage support registered.

mice: PS/2 mouse device common for all mice

i2c /dev entries driver

IBM IIC driver v2.1

ibm-iic0: using standard (100 kHz) mode

ibm-iic0: using standard (100 kHz) mode

NET: Registered protocol family 2

IP: routing cache hash table of 512 buckets, 4Kbytes

TCP: Hash tables configured (established 2048 bind 4096)

NET: Registered protocol family 1

NET: Registered protocol family 17

VFS: Mounted root (squashfs filesystem) readonly.

Mounted devfs on /dev

Freeing unused kernel memory: 80k init

Warning: unable to open an initial console.

usb 1-1: new full speed USB device using address 2

hub 1-1:1.0: USB hu

hub 1-1:1.0: 4 ports detected

usb 1-1.1: new full speed USB device using address 3

head: module license 'proprietary' taints kernel.

fp: attaching fp at 0xee to adapter IBM IIC

FPrev 0.04

write 1 event's ...

valid rtc time.. 1107621349

using a0900000 as framebuffer base

VID_DISP_MODE set to 0088e6c0

registered framebuffer

allocated major 251 for denc.

demux set source

core: Loaded IBM STB04xxx core driver

usb 1-1.3: new full speed USB device using address 4

write 1 event's ...

[MPEG] setting horizontal disp border

audio init

AUDIO_CLEAR_BUFFER

res: 0

demux: init

xp0_clk_stop

scsi0 : SCSI emulation for USB Mass Storage devices

Vendor: JetFlash Model: TS32MJF2B Rev: 2.00

Type: Direct-Access ANSI SCSI revision: 02

registering frontend...

SCSI device sda: 64000 512-byte hdwr sectors (33 MB)

sda: assuming Write Enabled

sda: assuming drive cache: write through

/dev/scsi/host0/bus0/target0/lun0: unknown partition table

Attached scsi removable disk sda at scsi0, channel 0, id 0, lun 0

disable continuous tone

USB Mass Storage device found at 4

write 1 event's ...

already got a frontend.

detected tuner.

stb04_pig: $Id: stb04_pig.c,v 1.6 2005/01/13 19:32:02 ghost Exp $

[XP1] Init

lcd.o: LCD driver (KS0713) module

avs: attaching avs at 0x94 to adapter IBM IIC

write 1 event's ...

Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0, type 0

usbcore: registered new driver usbhid

drivers/usb/input/hid-core.c: v2.0:USB HID core driver

kjournald starting. Commit interval 5 seconds

EXT3-fs warning: maximal mount count reached, running e2fsck is recommended

EXT3 FS on hda1, internal journal

EXT3-fs: mounted filesystem with ordered data mode.

kjournald starting. Commit interval 5 seconds

EXT3 FS on sda, internal journal

EXT3-fs: recovery complete.

EXT3-fs: mounted filesystem with ordered data mode.

setting 414720 bytes to 0

set event: 00000049

[AVS] set mode to RGB

[AVS] set mode to FBAS

[AVS] FBLK:1

[DENC] set PAL

set_vsw1:5

AUDIO_CLEAR_BUFFER

[AVS] set mode to RGB

[AVS] set mode to FBAS

[AVS] FBLK:1

[DENC] set PAL

[AVS] FNC:2

eth0: link down

[DENC] set WSS 4:3

[AVS] FNC:2

[DENC] set PAL

eth0: link up, 100Mbps, full-duplex, lpa 0x45E1

[XP1] set buffer size 40000 -> 40000

wake frontend from standby

(0)commited command sent

(0)commited command sent

(0)commited command sent

enable continuous tone

stv: wait 0.456 ms (sr=22001258)

xp0_clk_start

VIDEO_PLAY / VIDEO_CONTINUE, state 1 1

[XP1] set buffer size 40000 -> 40000

[XP1] set buffer size 40000 -> 2000

[XP1] set buffer size 40000 -> 40000

[XP1] set buffer size 40000 -> 40000

[XP1] set buffer size 40000 -> 40000

[XP1] set buffer size 40000 -> 40000

prism2usb_init: prism2_usb.o: 0.2.1-pre26 Loaded

prism2usb_init: dev_info is: prism2_usb

hfa384x_corereset: hfa384x_corereset not supported on USB on 2.5/2.6 kernels.

usbcore: registered new driver prism2_usb

[Dream1975]

Zag het al staan <img src="/ubbthreads/images/graemlins/smirk.gif" alt="" />

 

~ > insmod /var/wifi/p80211.ko

Using /var/wifi/p80211.ko

~ > insmod /var/wifi/prism2_usb.ko prism2_doreset=1

Using /var/wifi/prism2_usb.ko

~ > dmesg

Linux version 2.6.9 (ghost@Client) (gcc version 3.4.3)

T 2004

On node 0 totalpages: 8192

DMA zone: 8192 pages, LIFO batch:2

Normal zone: 0 pages, LIFO batch:1

HighMem zone: 0 pages, LIFO batch:1

Built 1 zonelists

Kernel command line: console=null root=/dev/mtdblock5 rootfstype=squashfs ro

PID hash table entries: 256 (order: 8, 4096 bytes)

Console: colour dummy device 80x25

Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)

Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)

Memory: 29952k available (1888k kernel code, 512k data, 80k init, 0k

Calibrating delay loop... 250.88 BogoMIPS (lpj=125440)

Mount-cache hash table entries: 512 (order: 0, 4096 bytes)

NET: Registered protocol family 16

SCSI subsystem initialized

usbcore: registered new driver usbfs

usbcore: registered new driver hub

devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)

devfs: boot_options: 0x1

JFFS2 version 2.2. © 2001-2003 Red Hat, Inc.

Serial: 8250/16550 driver $Revision: 1.90 $ 7 ports, IRQ sharing disabled

ttyS0 at MMIO 0x0 (irq = 20) is a 16550A

ttyS1 at MMIO 0x0 (irq = 21)

ttyS2 at MMIO 0x0 (irq = 31) is a 16550A

loop: loaded (max 8 devices)

smc91x.c: v1.1, sep 22 2004 by Nicolas Pitre <nico@cam.org>

eth0: SMC91C11xFD (rev 1) at 0xc306a300 IRQ 28 [nowait]

eth0: Ethernet addr: 00:09:34:0f:e7:05

eth0: PHY LAN83C183 (LAN91C111 Internal)

Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2

ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx

IBM STB04xxx IDE driver version 2.0

setup bus 0

Probing IDE interface ide0...

hda: ST340015A, ATA DISK drive

Unhandled interrupt 19, disabled

set drive!

Using deadline io scheduler

ide0 at 0xc306c1f8-0xc306c1ff,0xc306c1f6 on irq 25

hda: max request size: 128KiB

hda: 78165360 sectors (40020 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(33)

hda: cache flushes supported

/dev/ide/host0/bus0/target0/lun0: p1

dreambox: flash mapping: 800000 at 7f800000

DreamBOX rev3+: Found 1 x16 devices at 0x0 in 16-bit bank

Intel/Sharp Extended Query Table at 0x0031

cfi_cmdset_0001: Erase suspend on write enabled

0: offset=0x0,size=0x20000,b

Using buffer write method

disable flash VPP

Creating 7 MTD partitions on "DreamBOX rev3+":

0x00000000-0x00600000 : "DreamBOX cramfs+squashfs"

0x00600000-0x007c0000 : "DreamBOX jffs2"

0x007c0000-0x00800000 : "DreamBOX OpenBIOS"

0x00000000-0x007c0000 : "DreamBOX (w/o bootloader)"

0x00000000-0x00800000 : "DreamBOX (w/ bootloader)"

0x00120000-0x00600000 : "DreamBOX SquashedFS"

0x00000000-0x00120000 : "DreamBOX Cramfs"

drivers/usb/host/ohci-ocp.c: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) D

river (OCP)

drivers/usb/host/ohci-ocp.c: block sizes: ed 64 td 64

drivers/usb/host/ohci-ocp.c: starting OCP OHCI USB Controller

drivers/usb/host/ohci-ocp.c: ocp_ohci (OCP OHCI) at 0xe0010000, irq 18

ocp-ohci 07: new USB bus registered, assigned bus number 1

hub 1-0:1.0: USB hub found

hub 1-0:1.0: 2 ports detected

Initializing USB Mass Storage driver...

usbcore: registered new driver usb-storage

USB Mass Storage support registered.

mice: PS/2 mouse device common for all mice

i2c /dev entries driver

IBM IIC driver v2.1

ibm-iic0: using standard (100 kHz) mode

ibm-iic0: using standard (100 kHz) mode

NET: Registered protocol family 2

IP: routing cache hash table of 512 buckets, 4Kbytes

TCP: Hash tables configured (established 2048 bind 4096)

NET: Registered protocol family 1

NET: Registered protocol family 17

VFS: Mounted root (squashfs filesystem) readonly.

Mounted devfs on /dev

Freeing unused kernel memory: 80k init

Warning: unable to open an initial console.

usb 1-1: new full speed USB device using address 2

hub 1-1:1.0: USB hu

hub 1-1:1.0: 4 ports detected

usb 1-1.1: new full speed USB device using address 3

head: module license 'proprietary' taints kernel.

fp: attaching fp at 0xee to adapter IBM IIC

FPrev 0.04

valid rtc time.. 1107626042

using a0900000 as framebuffer base

VID_DISP_MODE set to 0088e6c0

registered framebuffer

allocated major 251 for denc.

demux set source

core: Loaded IBM STB04xxx core driver

usb 1-1.3: new full speed USB device using address 4

write 1 event's ...

[MPEG] setting horizontal disp border to 8 lines (hsize i

audio init

AUDIO_CLEAR_BUFFER

res: 0

demux: init

xp0_clk_stop

scsi0 : SCSI emulation for USB Mass Storage devices

registering frontend...

Vendor: JetFlash Model: TS32MJF2B Rev: 2.00

Type: Direct-Access ANSI SCSI revision: 02

SCSI device sda: 64000 512-byte hdwr sectors (33 MB)

sda: assuming Write Enabled

sda: assuming drive cache: write through

/dev/scsi/host0/bus0/target0/lun0:disable continuous tone

unknown partition table

Attached scsi removable disk sda at scsi0, channel 0

USB Mass Storage device found at 4

already got a frontend.

detected tuner.

stb04_pig: $Id: stb04_pig.c,v 1.6 2005/01/13 19:32:02 ghost Exp $

[XP1] Init

lcd.o: LCD driver (KS0713) module

avs: attaching avs at 0x94 to adapter IBM IIC

write 1 event's ...

Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0, type 0

usbcore: registered new driver usbhid

drivers/usb/input/hid-core.c: v2.0:USB HID core driver

kjournald starting. Commit interval 5 seconds

EXT3-fs warning: maximal mount count reached, running e2fs

EXT3 FS on hda1, internal journal

EXT3-fs: mounted filesystem with ordered data mode.

kjournald starting. Commit interval 5 seconds

EXT3 FS on sda, internal journal

EXT3-fs: recovery complete.

EXT3-fs: mounted filesystem with ordered data mode.

setting 414720 bytes to 0

set event: 00000049

[AVS] set mode to RGB

[AVS] set mode to FBAS

[AVS] FBLK:1

[DENC] set PAL

set_vsw1:5

AUDIO_CLEAR_BUFFER

[AVS] set mode to RGB

[AVS] set mode to FBAS

[AVS] FBLK:1

[DENC] set PAL

[AVS] FNC:2

eth0: link down

[DENC] set WSS 4:3

[AVS] FNC:2

[DENC] set PAL

eth0: link up, 100Mbps, full-duplex, lpa 0x45E1

[XP1] set buffer size 40000 -> 40000

wake frontend from standby

(0)commited command sent

(0)commited command sent

(0)commited command sent

enable continuous tone

stv: wait 0.456 ms (sr=22001258)

xp0_clk_start

VIDEO_PLAY / VIDEO_CONTINUE, state 1 1

[XP1] set buffer size 40000 -> 40000

[XP1] set buffer size 40000 -> 2000

[XP1] set buffer size 40000 -> 40000

[XP1] set buffer size 40000 -> 40000

[XP1] set buffer size 40000 -> 40000

[XP1] set buffer size 40000 -> 40000

prism2usb_init: prism2_usb.o: 0.2.1-pre23 Loaded

prism2usb_init: dev_info is: prism2_usb

hfa384x_corereset: hfa384x_corereset not supported on USB on 2.5/2.6 kernels.

usbcore: registered new driver prism2_usb

[Gast]

IS er al wellicht wat meer vooruitgang geboekt m.b.t. de wifi plugin in de Poseidon... Zit hier echt om te springen, zou hier heel blij mee zijn.

 

Heb wel een vaste kabel maar die gaat dan schots en scheef door mijn kamer heen.

Was toen al heel blij met wifi.

 

Hopelijk vind 1 van jullie tijd. Zou hier echt dankbaar voor zijn!!

[dAF2000]

Ik zal de laatste stand van zaken geven:

 

Zo'n drie testers hebben al wat drivers geprobeerd, maar we hebben 't tot nu toe nog niet goed draaiend gekregen. Verder zijn nu al twee personen de drivers aan 't maken.

 

Dit gebeurt allemaal vooral op een ander forum en op MSN enzo. Daarom dat 't hier nogal rustig lijkt <img src="/ubbthreads/images/graemlins/smile.gif" alt="" />

[Gast]

Ontzettend bedankt voor je reactie. We wachten het af. Het is tenslotte allemaal vrije tijd en hobby!!

[Gast]

heb contact gehad met de driver compileerder lol... volgens hem is het niet mogelijk om WPA ondersteuning toe te voegen.

 

Da's heeel erg jammer.

 

Wiri

[Gast]

Bedoel je met WPA de security of helemaal geen ondersteuning vooralsnog?

Dus dat er compleet nieuwe driver ontwikkeld moet worden?

Dit heeft allemaal te maken met de upgrade naar de nieuwe frontprocessor..

Daarnaast mis ik bijvoorbeeld ook nog de picviewer plugin. Was ik ook altijd blij mee.

Maar ja, zal uiteindelijk wel weer komen.

Kan ik downgraden naar de Zeus? Lijkt me eigenlijk niet echt verstandig...

[dAF2000]

WPA wordt inderdaad niet ondersteund voorlopig. Deze beperking zit vooral in de open source drivers. Natuurlijk blijft er wel ondersteuning voor de 64- en 128-bit WEP-sleutel.

 

Je kunt wel eens proberen Zeus (of een andere 1.08 image) in de interne flash te zetten en Poseidon via multiboot (op harddisk of USB via een USB-hub).

[Gast]

Dit betekent dat ook gewoon zonder problemen kan downgraden, naar Zeus?

[dAF2000]

Nou, Zeus kun je natuurlijk altijd op je Dreambox zetten. Da's niet zo'n probleem. Alleen mis je dan de laatste verbeteringen/dingetjes natuurlijk.

 

De reden dat de wifi plugin niet werkt, ligt in de nieuwe kernel. Ik heb 't niet geprobeerd, omdat ik geen Wifi op de Dreambox heb, maar door Zeus (of originele 1.08 of 1.08.1) in de flash te zetten en Poseidon als multiboot, krijg je de oude kernel maar verder gewoon de functionaliteit van Poseidon. Kijk maar eens naar "flash wizard" over hoe dat werkt.

[Gast]

Bedankt voor je toelichting. Ga ik eens proberen, dit weekend. Prettig weekend!!!

[Dream1975]

Heb zojuist bericht gekregen van degene die de drivers compileert (lololuy) dat hij er dit weekend weer tijd in gaat steken (hij had het vrij druk deze week). Dus met een beetje geluk is het gauw opgelost <img src="/ubbthreads/images/graemlins/wink.gif" alt="" />.