[DBOX-II] Sagem Kabel box

[Gast]

Beste Mensen,

 

Ik heb gister een sagem Dbox op de kop kunnen tikken, nu wou ik er naartoe verbinden via het lan, maar dit lukte niet echt, ik heb um toen aan een seriele kabel gedrukt en gekeken wat er gebeurde. Als de Dbox klaar is met laden kan ik ook niks intypen. Kan iemand mij vertellen hoe ik kan zorgen dat mijn netwerk aansluiting op de dbox het weer doet. Ik zal hieronder het een bootlog posten

 

Oops keel aeleseldebug: DDF: Calibrating delay loop... debug: DDF: 66.76 Bogo

MIPS

debug: BMon V1.0 mID 03

debug: feID 00 enxID 03

debug: fpID 52 dsID 01-06.4e.58.07.00.00-7a

debug: HWrev 41 FPrev 0.23

debug: B/Ex/Fl(MB) 32/00/08

WATCHDOG reset enabled

dbox2:root> debug:

BOOTP/TFTP bootstrap loader (v0.3)

debug:

debug: Transmitting BOOTP request via broadcast

ÿ

debug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPS

debug: BMon V1.0 mID 03

debug: feID 00 enxID 03

debug: fpID 52 dsID 01

debug: HWrev 41 FPrev 0.23

debug: B/Ex/Fl(MB) 32/00/08

WATCHDOG reset enabled

dbox2:root> debug:

BOOTP/TFTP bootstrap loader (v0.3)

debug:

debug: Transmitting BOOTP request via broadcast

debug: Given up BOOTP/TFTP boot

boot net failed

 

Flash-FS bootstrap loader (v1.5)

 

Found Flash-FS superblock version 3.1

Found file /root/platform/sagem-dbox2/kernel/os in Flash-FS

debug: Got Block #0040

 

will verify ELF image, start= 0x800000, size= 158624

verify sig: 262

Branching to 0x40000

 

 

U-Boot 1.1.1 (TuxBox) (May 9 2004 - 1

 

CPU: PPC823ZTnnB2 at 66 MHz: 2 kB I-Cache 1 kB D-Cache

Board: DBOX2, Sagem, BMon V1.0

Watchdog enabled

I2C: ready

DRAM: 32 MB

FLASH: 8 MB

Scanning JFFS2 FS: .. done.

find_inode failed for name=boot.conf

load: Failed to find inode

FB: ready

LCD: ready

In: serial

Out: serial

Err: serial

Net: SCC ETHERNET

 

Options:

1: Console on null

2: Console on ttyS0

3: Console on framebuffer

Select option (1-3), other keys to stop autoboot: 0

### FS (squashfs) loading 'vmlinuz' to 0x100000

### FS load complete: 700609 bytes loaded to 0x100000

...............................................................

Un-Protected 63 sectors

## Booting image at 00100000 ...

Image Name: dbox2

Image Type: PowerPC Linux Kernel Image (gzip compressed)

Data Size: 700545 Bytes = 684.1 kB

Load Address: 00000000

Entry Point: 00000000

Verifying Checksum ... OK

Uncompressing Kernel Image ... OK

Linux version 2.4.27-dbox2 (root@mh) (gcc version 3.2.3) #1 Thu Aug 26 15:47:10

MSD 2004

On node 0 totalpages: 8192

zone(0): 8192 pages.

zone(1): 0 pages.

zone(2): 0 pages.

Kernel command line: console=ttyS0 root=/dev/mtdblock2 rootfstype=squashfs

Decrementer Frequency = 247500000/60

m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)

m8xx_wdt: keep-alive trigger installed (PITC: 0x2580)

Console: colour dummy device 80x25

Calibrating delay loop... 65.74 BogoMIPS

Memory: 30724k available (1212k kernel code, 360k data, 72k init, 0k highmem)

Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)

Inode cache hash table entries: 2048 (order: 2, 16384 bytes)

Mount cache hash table entries: 512 (order: 0, 4096 bytes)

Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)

Page-cache hash table entries: 8192 (order: 3, 32768 bytes)

POSIX conformance testing by UNIFIX

Linux NET4.0 for Linux 2.4

Based upon Swansea University Computer Society NET3.039

Initializing RT netlink socket

Starting kswapd

devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)

devfs: boot_options: 0x1

JFFS2 version 2.2. © 2

i2c-core.o: i2c core module version 2.6.1 (20010830)

i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830)

CPM UART driver version 0.04

ttyS0 at 0x0280 is on SMC1 using BRGÿttyS1 at 0x0380 is on SMC2 using BRG2

pty: 256 Unix98 ptys configured

eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:38:48:1d

D-Box 2 flash driver (size->0x800000 mem->0x10000000)

D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit mode

Intel/Sharp Extended Query Table at 0x0035

cfi_cmdset_0001: Erase suspend on write

Using word write method

Creating 6 MTD partitions on "D-Box 2 flash memory":

0x00000000-0x00020000 : "BR bootloader"

0x00020000-0x00040000 : "flfs (ppcboot)"

0x00040000-0x00640000 : "root (squashfs)"

0x00640000-0x00800000 : "var (jffs2)"

0x00020000-0x00800000 : "flash without bootloader"

0x00000000-0x00800000 : "complete flash"

Linux video capture interface: v1.00

NET4: Linux TCP/IP 1.0 for NET4.0

IP Protocols: ICMP, UDP, TCP

IP: routing cache hash table of 512 buckets, 4Kbytes

TCP: Hash tables configured (establ

NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.

VFS: Mounted root (squashfs filesystem) readonly.

Mounted devfs on /dev

Freeing unused kernel memory: 72k init

init started: BusyBox v1.00-pre8 (2004.03.07-13:49+0000) multi-cUsing /lib/modu

les/2.4.27-dbox2/misc/tuxbox.o

Detected STB:

Vendor: Sagem

Model: D-BOX2

Using /lib/modules/2.4.27-dbox2/misc/dvb-core.o

Using /lib/modules/2.4.27-dbox2/misc/dbox2_i2c.o

[i2c-8xx]: mpc 8xx i2c init

[i2c-8xx]: adapter: 0

Using /lib/modules/2.4.27-dbox2/misc/dvb_i2c_bridge

Using /lib/modules/2.4.27-dbox2/misc/event.o

event: $Id: event.c,v 1.12 2003/09/30 05:45:38 obi Exp $

Using /lib/modules/2.4.27-dbox2/misc/dbox2_fp.o

Using /lib/modules/2.4.27-dbox2/misc/dbox2_fp_input.o

Using /lib/modules/2.4.27-dbox2/misc/at76c651.o

Using /lib/modules/2.4.27-dbox2/misc/ves1x93.o

Using /lib/modules/2.4.27-dbox2/misc/avs.o

Using /lib/modules/2.4.27-dbox2/misc/saa7126.o

Using /lib/modules/2.4.27-dbox2/misc/cam.o

$Id: cam.c,v 1.30 2004/01/10 16:36:34 alexw Exp $

Using /lib/modules/2.4.27-dbox2/mis

lcd.o: init lcd driver module

lcd.o: found KS0713/SED153X lcd interface

Using /lib/modules/2.4.27-dbox2/misc/avia_av.o

avia_av: $Id: avia_av_core.c,v 1.94 2004/07/03 01:18:36 carjay Exp $

avia_av_core: Starting avia_av_wdt thread.

avia_av_event: $Id: avia_av_event.c,v 1.11 2003/10/26 16:32:51 obi Exp $

avia_av_proc: $Id: avia_av_proc.c,v 1.14 2004/01/21 20:02:29 carjay Exp $

Using /lib/modules/2.4.27-dbox2/misc/avia_gt.o

avia_gt_core: $Id: avia_gt_core.c,v 1.47 2004/05/23 10:52:31 derget Exp $

avia_gt_core: autodetecting chip type... eNX

avia_gt_enx: $Id: avia_gt_enx.c,v 1.21 2003/09/30 05:45:35 obi Exp $

avia_gt_accel: $Id: avia_gt_accel.c,v 1.19 2003/09/30 05:45:35 obi Exp $

avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.210 2004/06/26 16:08:15 carjay Exp $

avia_gt_ucode: loaded ucode v0014

avia_gt_ucode: ucode section filters enabled.

avia_gt_dmx: warning, misaligned queue 0 (is 0xFD200, size 65536), aligning...

avia_gt_gv: $Id: avia_gt_gv.c,v 1.38 2004/03/17 18:42:18 zwen Exp $

avia_gt_gv: set_input_size (w

avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.29 2004/01/29 19:38:20 zwen Exp $

avia_gt_pcm_set_rate(44100)

avia_gt_capture: $Id: avia_gt_capture.c,v 1.32 2003/09/30 05:45:35 obi Exp $

avia_gt_pig: $Id: avia_gt_pig.c,v 1.40 2003/09/30 05:45:35 obi Exp $

avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.26 2003/08/01 17:31:22 obi Exp $

avia_gt_core: Loaded AViA eNX/GTX driver

Using /lib/modules/2.4.27-dbox2/misc/avia_gt_fb.o

avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.54 2004/03/17 18:42:18 zwen Exp $

avia_gt_gv: set_input_mode (mode=2)

avia_gt_gv: set_input_size (width=720, height=576)

avia_gt_gv: set_input_mode (mode=2)

avia_gt_gv: set_input_size (width=720, height=576)

avia_gt_gv: set_input_mode (mode=2)

avia_gt_gv: set_input_size (width=720, height=576)

Console: switching to colour frame buffer device 82x32

avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device

Using /lib/modules/2.4.27-dbox2/misc/avia_gt_lirc.o

avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.14 2003/09/30 05:45:35 obi Exp $

avia_gt_ir: $Id: avia_gt_ir.c,v 1.30 2003/09/30 05:4

Using /lib/modules/2.4.27-dbox2/misc/avia_gt_oss.o

avia_oss: $Id: avia_gt_oss.c,v 1.26 2004/05/31 22:56:02 carjay Exp $

avia_gt_pcm_set_rate(44100)

Using /lib/modules/2.4.27-dbox2/misc/avia_gt_v4l2.o

avia_gt_v4l2: $Id: avia_gt_v4l2.c,v 1.12 2003/09/30 04:54:03 obi Exp $

Using /lib/modules/2.4.27-dbox2/misc/avia_napi.o

$Id: avia_napi.c,v 1.18 2003/11/24 09:53:01 obi Exp $

DVB: registering new adapter (C-Cube AViA GTX/eNX with AViA 500/600).

DVB: registering frontend 0:0 (Atmel AT76C651A with TUA6010XS)...

dvb_i2c_bridge: enabled DVB i2c bridge to PowerPC 8xx I2C adapter

Using /lib/modules/2.4.27-dbox2/misc/cam_napi.o

$Id: cam_napi.c,v 1.8 2003/09/30 05:45:34 obi Exp $

Using /lib/modules/2.4.27-dbox2/misc/avia_av_napi.o

avia_av_napi.c: $Id: avia_av_napi.c,v 1.33 2004/03/11 15:30:27 derget Exp $

Using /lib/modules/2.4.27-dbox2/misc/avia_gt_napi.o

avia_gt_napi: $Id: avia_gt_napi.c,v 1.202 2004/06/24 00:26:58 carjay Exp $

avia_gt_napi: procfs entrys mixvt Exp $

avia_gt_napi: hw section filtering disabled.

Using /lib/modules/2.4.27-dbox2/misc/dbox2_fp_napi.o

Using /lib/modules/2.4.27-dbox2/misc/avia_gt_proc.o

avia_gt_proc: $Id: avia_gt_proc.c,v 0.01 2003/07/22 14:09:12 mixvt Exp $

Using /lib/modules/2.4.27-dbox2/misc/emlog.o

emlog: version 0.40 rev. s running, using major number 241

Using /lib/modules/2.4.27-dbox2/misc/camd.o

[camd-cardserver.o] compiled Feb 21 2004, 19:18:42

[camd-cardserver.o] ioport base = ff000950

[camd-cardserver.o] commproc base = ff0009c0

 

Please press Enter to activate this console. + cp

+ cp /var/keys/SoftCam.Key /tmp/SoftCam.Key

 

--- EMUD v 1.16 by [ruDREAM team] ---

[EMUD] go on PID=101

[EMUD] go on PID=102

[GUARD] Kicked to background...

[GUARD] go in main loop

[EMUD] Kicked to background...

[EMUD] kills all=1 known's Demons

killall: mgcamd: no process killed

killall: newcamd: no process killed

killall: camd3: no process killed

killall: scam: no process killed

killall: rdgd: no process killed

killall: gbox: no process killed

[EMUD] check full patsh to start Emudemon=[/var/bin/gbox &]

[EMUD] go in main loop

 

gbox 1.00pre11/ppc/api2

mode 00

AU:01/update:01/KeyFile:00 Hash:01 DispECM:01/EMM:01 UDPInit:00 OSD:00

AU=on or mode!=Mixmode will disable cwsharing !

Using rs232 port: /dev/tts/1

indirect 4 5

mode: any pid

ERROR 0241 !!!!!!!!!!

couldn't read-in Seca keys...

couldn't read-in Nagra keys...

couldn't read-in Conax keys...

ERROR 0220 !!!!!!!!!!

sc8in1 not found, switching to smartmouse mode

entering main loop

**** hashTableECM 0 elements ****

**** hashTableEMM 0 elements ****

avia_gt_gv: set_input_mode (mode=2)

avia_gt_gv: set_input_size (width=720, height=576)

sh: cannot open /share/keymaps/eng.kmap: No such file

SIOCADDRT: Network is unreachable

cp: /share/zoneinfo/CET-01:00: No such file or directory

killall: nmbd: no process killed

waitpid: No child processes

killall: smbd: no process killed

waitpid: No child processes

sh: smbd: not found

waitpid: No child processes

sh: nmbd: not found

waitpid: No child processes