C.D. kaart activeren in DM500 / gemini / NEWCAMD6

[peter-nmgn]

hey,

 

weet iemand of je een kaart geactiveerd krijgt van CD met de laatste gemini voor de dm500 met newcamd 6.0

 

groetjes van peter

 

newcamd.conf'

 

Citaat:

# /var/tuxbox/config/newcamd.conf

#

# newcamd mandatory settings

#

# Use emulator?

EMU = yes

# if both control word server and emulator keys are available for the

# channel, which method should be tried first?

PREFER_EMU = no

# Autoupdate for Emu and Control Word Servers

# AU is always yes if there are betad UDS control word server

# connected to newcamd

AU = yes

#

# OSD

#

# number of seconds to show the newcamd OSD, works on enigma only

# 0 seconds -> OSD off

OSD_TIMEOUT = 0

# Recent Enigma versions come with a new option "Use http authentication"

# in the Expert Setup menu. If this option is enabled, the Enigma web server

# requires all clients to authorize themselves with username (root) and

# password (usually dbox2 or dreambox). The following option tells newcamd

# about the authentication username and password to use for the web server

# in order to be able to display its on screen information.

OSD_WEB_LOGIN = root:dreambox

#

# newcamd debug options

#

# dumps all ca systems used by a channel on the console

SHOW_ALL_CA_SYSTEMS = no

# print debug messages about ECM handling

DEBUG_ECM = yes

# print debug messages about EMM handling

DEBUG_EMM = no

# print debug messages about Control Word Server (CWS)

DEBUG_CWS = yes

# print debug messages about dbox2 CAM (cam-alpha.bin)

DEBUG_CAM = yes

# hex dump of entire PAT

SHOW_PAT = no

# hex dump of entire PMT

SHOW_PMT = no

# hex dump of entire ECM

SHOW_ECM = no

# hex dump of entire CAT

SHOW_CAT = no

# hex dump of entire EMM (AU)

SHOW_EMM = no

# show network ECM messages being sent and received from/to the cardservers

SHOW_CWS_ECM = no

# show network EMM messages being sent and received from/to the cardservers

SHOW_CWS_EMM = no

# hex dump of EMMs with wrong signature

EMM_REPORT_WRONG_SIG = no

#

# newcamd optional settings

#

# Delay between reception of new control word and writing them into

# the CSA registers

# this is a default, can be changed for each individual key in keylist

DEFAULT_CW_DELAY = 0

# reload config on every channel zap

RELOAD_CONFIG_ON_ZAP = yes

# reload keylist on every channel zap

RELOAD_KEYLIST_ON_ZAP = no

# write osd ca info to file

CA_INFO_FILE = /tmp/cainfo.txt

#

# newcamd mandatory settings for control word servers (cws)

#

# Cardserver list

#

# <hostname> <port> <username> <password> <14 byte triple-des key in hex> <lan/wan> <cardserver name>

#

# wan connections will be dropped and rebuild if newcamd is told so by camdcmd

# (see admin options)

#

# hostname = uds to use betad, port is the serial port in that case

#

# CWS = uds 1 dummy dummy

# CWS = linux.domain.com 10000 dummy2 dummy2 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan cardserv

# CWS = 127.0.0.1 10000 dummy3 dummy3 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan cardserv

# CWS = uds 0 local local

CWS = 127.0.0.1 10001 local local 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan cardserv

# newcamd optional settings for using control word servers (cws)

#

# Timeout for cardserver login in 100ms

CWS_CONNECT_TIMEOUT = 20

# Port to listen for incoming cardserver connections (reverse login)

# and/or admin connections

CWS_INCOMING_PORT = 12000

# Port to get a list of all connected cardservers, just telnet to it

CWS_DEBUG_PORT = 12001

# send keep alive messages to servers to keep connections from dying by

# unreasonable router NAT timeouts, make sure all cardservers/spiders you

# conntect to are v5.25 or newer, otherwise you'll loose connection to them,

# if set to yes

# seems this feature is commonly misunderstood, it only keeps connections

# open even if no data packets are using it for while (NAT routers tend to

# forget about established tcp connections when they are inactive), it is

# NOT to automatically reconnect to servers, see also Q&A in readme.txt

CWS_KEEPALIVE = yes

ADMIN_PASSWORD = test 00 00 00 00 00 00 00 00 00 00 00 00 00 00

 

en cardserv.cfg

 

Citaat:

#

DESKEY = 01 02 03 04 05 06 07 08 09 10 11 12 13 14

SERVER_NAME = cardserv

DEBUG_PORT = 14000

ENTITLEMENT_PORT = 14001

ADMIN_PORT = 14002

ADMIN_PASSWORD = secret 00 00 00 00 00 00 00 00 00 00 00 00 00 00

USER = local local lan 127.0.0.1 12000

#USER = spider spider lan 127.0.0.1 15003

DEBUG_INIT = no

DEBUG_NET = no

DEBUG_ECM = no

DEBUG_EMM = no

#SERIAL_PORT = 0

#TCP_PORT = 10000

SERIAL_PORT = 1

TCP_PORT = 10001

EMM-G = yes

EMM-S = yes

EMM-U = yes

SPECIAL_FEATURES = yes

[Gast]

Ziet er aardig uit.

 

Probeer de Database

 

Anders nog eens.

[Gast]

Citaat:

DESKEY = 01 02 03 04 05 06 07 08 09 10 11 12 13 14

SERVER_NAME = cardserv

DEBUG_PORT = 14000

ENTITLEMENT_PORT = 14001

ADMIN_PORT = 14002

ADMIN_PASSWORD = secret 00 00 00 00 00 00 00 00 00 00 00 00 00 00

USER = local local lan 127.0.0.1 12000

#USER = spider spider lan 127.0.0.1 15003

DEBUG_INIT = no

DEBUG_NET = no

DEBUG_ECM = no

DEBUG_EMM = no

#SERIAL_PORT = 0

#TCP_PORT = 10000

SERIAL_PORT = 1

TCP_PORT = 10001

EMM-G = yes

EMM-S = yes

EMM-U = yes

SPECIAL_FEATURES = yes

 

1 opmerking misschien :

 

USER = local local lan 127.0.0.1 12000 [color:"red"]AU[/color]

[Gast]

Citaat:

1 opmerking misschien :

USER = local local lan 127.0.0.1 12000 [color:"red"]AU[/color]

Nee, die au is niet nodig voor de 1e user. De 1e user is automagisch al AU. Maar dubbelop kan geen kwaad denk <img src="/forums/images/graemlins/wink.gif" alt="" />

Citaat:

EMM-G = yes
EMM-S = yes
EMM-U = yes

Volgens mij zet je hiermee alle blockers juist aan. En dat wil je juist niet wanneer je gaat aktieveren.

Doe voor deze 3 regels eens een #

# EMM-G = yes
# EMM-S = yes
# EMM-U = yes

[peter-nmgn]

waar is die AU voor ... (Auto Update??)

 

heeft dat nog betrekking tot het activeren??

 

groetjes