Telnet / cardserve

[DBdrug]

Als ik telnet naar mijn Dreambox op poort 14001, krijg ik:

 

telnet 10.92.2.10 14001

Bezig met verbinding maken met 10.92.2.10... Kan geen verbinding met de host

maken, op poort 14001: De verbinding is mislukt

 

Normaal telnetten naar 10.92.2.10 en dan inloggen gaat wel.

 

Als ik dan cardserver probeer op te starten krijg ik:

 

~ > cardserver

[cardserver 11:01:27] compiled Nov 28 2004, 15:09:22

[cardserver 11:01:27] /dev/sci0: Device or resource busy

[cardserver 11:01:27] parse error in config file /var/tuxbox/config/cardserv.cf

line 18.

[cardserver 11:01:27] parse error in config file /var/tuxbox/config/cardserv.cf

line 19.

[cardserver 11:01:27] parse error in config file /var/tuxbox/config/cardserv.cf

line 23.

 

Line 18 = SERIAL_PORT = 1

Line 19 = TCP_PORT = 10000

Line 23 = SPECIAL_FEATURES = yes

 

Ik krijg mijn originele CD kaart maar niet aan de praat en vermoed dat het hier te maken mee heeft. Wat is er fout?

 

Volledige cardserv.cfg ziet er als volgt uit (kopie van Guardian uit forum):

 

DESKEY = 01 02 03 04 05 06 07 08 09 10 11 12 13 14

SERVER_NAME = cardserv

DEBUG_PORT = 14000

ENTITLEMENT_PORT = 14001

ADMIN_PORT = 14002

ADMIN_PASSWORD = secret 00 00 00 00 00 00 00 00 00 00 00 00 00 00

USER = local local lan dreambox 12000

DEBUG_INIT = no

DEBUG_NET = no

DEBUG_ECM = no

DEBUG_EMM = no

#SERIAL_PORT = 0

#TCP_PORT = 10001

#EMM-G = no

#EMM-S = no

#EMM-U = no

#SPECIAL_FEATURES = no

SERIAL_PORT = 1

TCP_PORT = 10000

EMM-G = yes

EMM-S = yes

EMM-U = yes

SPECIAL_FEATURES = yes

#SERIAL_PORT = 2

#TCP_PORT = 10002

#EMM-G = no

#EMM-S = no

#EMM-U = no

#SPECIAL_FEATURES = no

 

Gebruik Scam als Emu. Ook Newcamd 5.28 geprobeerd (newcamd.conf als voorbeeld Guardian uit forum). Bij beide geen succes.

 

Maak gebruik van PLI Amber.

 

Wie weet wat er aan de hand is??

[Bassie]

Hoi,

 

In welk slot heb jij je kaart zitten?

 

Bassie <img src="/forums/images/graemlins/xyxthumbs.gif" alt="" />

[DBdrug]

Onderste boven (chip naar beneden) in onderste slot.

[Bassie]

Probeer deze eens in het bovenst slot.

 

Bassie

 

 

DESKEY = 01 02 03 04 05 06 07 08 09 10 11 12 13 14

SERVER_NAME = cardserv

DEBUG_PORT = 14000

ENTITLEMENT_PORT = 14001

ADMIN_PORT = 14002

ADMIN_PASSWORD = secret 00 00 00 00 00 00 00 00 00 00 00 00 00 00

USER = root dreambox lan dreambox 12000

DEBUG_INIT = no

DEBUG_NET = no

DEBUG_ECM = no

DEBUG_EMM = no

SERIAL_PORT = 0

TCP_PORT = 10001

EMM-G = yes

EMM-S = yes

EMM-U = yes

SPECIAL_FEATURES = yes

SERIAL_PORT = 1

TCP_PORT = 10000

EMM-G = yes

EMM-S = yes

EMM-U = yes

SPECIAL_FEATURES = yes

#SERIAL_PORT = 2

#TCP_PORT = 10002

#EMM-G = no

#EMM-S = no

#EMM-U = no

#SPECIAL_FEATURES = no

[Bassie]

Heb je je newcamd.config wel goed?

Bassie <img src="/forums/images/graemlins/biggthumpup.gif" alt="" />

[DBdrug]

Gebruik Scam (tip uit forum aangezien je daar niets voor hoeft te configureren), maar mijn newcamd.conf ziet er als volgt uit:

 

DEMUX_API = 2

BOX_TYPE = DM7000

CONTROL_WORD_DEVICE = CA

CA_API = 3

GTX_OUTPUT_MODE = 16

PMT_UPDATE_WATCH = no

EMU = yes

PREFER_EMU = no

DISABLE_CAM = yes

CAM_CASYS = 17

AU = yes

SHOW_ALL_CA_SYSTEMS = no

OSD = none

DEBUG_ECM = yes

DEBUG_EMM = yes

DEBUG_CWS = yes

DEBUG_CAM = yes

DEBUG_CAM_HEX = no

SHOW_CW = no

SHOW_PAT = no

SHOW_PMT = no

SHOW_ECM = no

SHOW_CAT = no

SHOW_EMM = no

SHOW_CWS_ECM = no

SHOW_CWS_EMM = no

EMM_REPORT_WRONG_SIG = no

OSD_WAIT_TIME = 2000

DEFAULT_CW_DELAY = 500

RELOAD_CONFIG_ON_ZAP = yes

RELOAD_KEYLIST_ON_ZAP = no

CA_INFO_FILE = /tmp/cainfo.txt

#CWS = uds 0 dummy dummy

# CWS = linux.domain.com 10000 dummy2 dummy2 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan cardserv

CWS = 127.0.0.1 10000 local local 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan cardserv

CWS = 127.0.0.1 10001 local local 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan cardserv

CWS_CONNECT_TIMEOUT = 20

CWS_INCOMING_PORT = 12000

CWS_DEBUG_PORT = 12001

ADMIN_PASSWORD = secret 00 00 00 00 00 00 00 00 00 00 00 00 00 00

[Bassie]

Probeer deze dan.

FF reseten..... voila

 

 

# /var/tuxbox/config/newcamd.conf

#

# newcamd mandatory settings

#

# What Demux API is used? (1 = very old, 2 = rel (Dreambox), 3 = head (VDR))

DEMUX_API = 2

# on PPC version: What Box is used? Valid options are DBOX2, DM7000 and DM5600

# on I386 version this parameter is ignored

BOX_TYPE = DM7000

# Which device for writing control words should be used?

# Valid options are CA, SDEV or GTX

# (SDEV and GTX = /proc/bus/gtx, CA = /dev/caX or /dev/dvb/card0/caX)

CONTROL_WORD_DEVICE = CA

# What CA0 API is used?

# 3 for recent DVB-S driver or recent Dreambox drivers (dream.o from 1.07.3)

# also for ca1 use on dbox2

# 2 for older Dreambox driver (ca.o or dream.o up to 1.07.2)

# no effect on PPC version if CONTROL_WORD_DEVICE = GTX or SDEV

CA_API = 3

# output control words to /proc/bus/gtx in 16 byte or 4096 byte packets

# no effect on I386 version or on PPC version, if BOX_TYPE = DREAMBOX

GTX_OUTPUT_MODE = 16

# This is important for channels which frequently change between free and

# encrypted broadcasts. The change will be reflected in the PMT. If you

# don't want your picture to stop when the channel goes from free access

# mode to encrypted mode, either your zapper (zapit/Enigma) or newcamd

# itself has to keep track of PMT changes. Recent Enigma versions do this,

# so you can set PMT_UPDATE_WATCH to no. Recent Zapit versions also have

# this option, but it is not compiled by default. So when using Zapit

# without PMT updates, you need to enable newcamd to monitor the PMT

# (PMT_UPDATE_WATCH = yes). Having both zapper and newcamd monitor

# the PMT at the same time, can lead to all kind of instabilities and

# should therefore by avoided, although it might seem to work at first.

PMT_UPDATE_WATCH = no

# Use emulator?

EMU = yes

# if both control word server and emulator keys are available for the

# channel, which method should be tried first?

PREFER_EMU = no

# deactivates the dbox2 Betacrypt CAM

# this has to be set to yes on Dreambox

DISABLE_CAM = yes

# use dbox2 Betacrypt CAM for caids 06, 17 or both (00)?

CAM_CASYS = 17

# Autoupdate for Emu and Control Word Servers

# AU is always yes if there are Betacrypt UDS control word server

# connected to newcamd

AU = yes

#

# newcamd debug options

#

# dumps all ca systems used by a channel on the console

SHOW_ALL_CA_SYSTEMS = no

# On Screen Display, neutrino, enigma or none

OSD = none

# Recent Enigma versions come with a new option "Use http authentication"

# in the Expert Setup menu. If this option is enabled, the Enigma web server

# requires all clients to authorize themselves with username (root) and

# password (usually dbox2 or dreambox). The following option tells newcamd

# about the authentication username and password to use for the web server

# in order to be able to display its on screen information.

OSD_WEB_LOGIN = root:dreambox

# write osd ca info to file

CA_INFO_FILE = /tmp/cainfo.txt

# print debug messages about ECM handling

DEBUG_ECM = yes

# print debug messages about EMM handling

DEBUG_EMM = no

# print debug messages about Control Word Server (CWS)

DEBUG_CWS = yes

# print debug messages about dbox2 CAM (cam-alpha.bin)

DEBUG_CAM = yes

# print command message to/from dbox2 CAM as hex strings

DEBUG_CAM_HEX = no

# print all plain control words used

SHOW_CW = no

# hex dump of entire PAT

SHOW_PAT = no

# hex dump of entire PMT

SHOW_PMT = no

# hex dump of entire ECM

SHOW_ECM = no

# hex dump of entire CAT

SHOW_CAT = no

# hex dump of entire EMM (AU)

SHOW_EMM = no

# show network ECM messages being sent and received from/to the cardservers

SHOW_CWS_ECM = no

# show network EMM messages being sent and received from/to the cardservers

SHOW_CWS_EMM = no

# hex dump of EMMs with wrong signature

EMM_REPORT_WRONG_SIG = no

# delay between channel zap and appearance of the OSD

OSD_WAIT_TIME = 2000

#

# newcamd optional settings

#

# Delay between reception of new control word and writing them into

# the CSA registers

# this is a default, can be changed for each individual key in keylist

DEFAULT_CW_DELAY = 500

# reload config on every channel zap

RELOAD_CONFIG_ON_ZAP = yes

# reload keylist on every channel zap

RELOAD_KEYLIST_ON_ZAP = no

#

# newcamd mandatory settings for control word servers (cws)

#

# Cardserver list

#

# <hostname> <port> <username> <password> <14 byte triple-des key in hex> <lan/wan> <cardserver name>

#

# wan connections will be dropped and rebuild if newcamd is told so by camdcmd

# (see admin options)

#

# hostname = uds to use betad, port is the serial port in that case

#

#

CWS = 127.0.0.1 10000 root dreambox 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan cardserv

CWS = 127.0.0.1 10001 root dreambox 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan cardserv

 

#

# newcamd optional settings for using control word servers (cws)

#

# Timeout for cardserver login in 100ms

CWS_CONNECT_TIMEOUT = 20

# Port to listen for incoming cardserver connections (reverse login)

# and/or admin connections

CWS_INCOMING_PORT = 12000

# Port to get a list of all connected cardservers, just telnet to it

CWS_DEBUG_PORT = 12001

#

# newcamd admin control options

# (incoming port is the same as CWS_INCOMING_PORT)

#

# <password> <14 byte des key>

#

ADMIN_PASSWORD = secret 00 00 00 00 00 00 00 00 00 00 00 00 00 00

[Bassie]

Wel ff je emu op newcamd zetten.

 

Bassie <img src="/forums/images/graemlins/biggthumpup.gif" alt="" />

[DBdrug]

Ik heb het idee de cardserver niet draait (lijkt me dat dit nodig is) aangezien ik via telnet niet kan connecten op poort 14001.

 

En zonder cardserver geen beeld toch?!

[Bassie]

heb je je emu op newcamd staan?

bassie

[DBdrug]

Yep en CD weer gebeld voor heractivatie. Ff afwachten dus...

[Bassie]

Probeer eens tenlnet ipnummer

inloggen

nc localhost 12001

 

Bassie

[DBdrug]

Dreambox kent commando nc niet:

 

~ > nc

-sh: nc: not found

~ > nc localhost 12001

-sh: nc: not found

~ >

[Bassie]

en telnet localhost 12001?

Lijkt erop dat inderdaad je cardserv niet gestart is.

Bassie

[DBdrug]

Dan krijg ik:

 

~ > telnet

BusyBox v1.00 (2005.04.23-23:11+0000) multi-call binary

 

Usage: telnet [-a] [-l USER] HOST [PORT]

 

~ > telnet localhost 12001

Connection closed by foreign host.