cardsharing met Newcamd

[Marc put]

Ik share momenteel met radegast maar om het switchen te vermijden wil ik de nieuwste emu Newcamd gebruiken om te sharen. Ik heb al zitten prutsen in de configs maar tot op heden "nougabollen".

Voor alle duidelijkheid ik "gebruik" een externe server waarvan ik enkel het ip (zullen we het 111.111.111.111 noemen) en de poort nummer (XXXXX) ken.

Tot op heden gebruikte ik een ftp prog om de config te wijzigen (via edit by notpad).

Onderstaand vind je mijn niet gewijzigde newcamd config. Wie wil me eens helpen om de gegevens hier juist in te vullen met een afwijkend kleurtje ?

 

 

 

# /var/tuxbox/config/newcamd.conf

#

# newcamd mandatory settings

#

# Use emulator?

EMU = yes

# if both control word server and emulator keys are available for the

# channel, which method should be tried first?

PREFER_EMU = yes

# Autoupdate for Emu and Control Word Servers

# AU is always yes if there are betad UDS control word server

# connected to newcamd

AU = yes

#

# OSD

#

# number of seconds to show the newcamd OSD, works on enigma only

# 0 seconds -> OSD off

OSD_TIMEOUT = 0

# Recent Enigma versions come with a new option "Use http authentication"

# in the Expert Setup menu. If this option is enabled, the Enigma web server

# requires all clients to authorize themselves with username (root) and

# password (usually dbox2 or dreambox). The following option tells newcamd

# about the authentication username and password to use for the web server

# in order to be able to display its on screen information.

OSD_WEB_LOGIN = root:dreambox

#

# newcamd debug options

#

# dumps all ca systems used by a channel on the console

SHOW_ALL_CA_SYSTEMS = no

# print debug messages about ECM handling

DEBUG_ECM = yes

# print debug messages about EMM handling

DEBUG_EMM = no

# print debug messages about Control Word Server (CWS)

DEBUG_CWS = yes

# print debug messages about dbox2 CAM (cam-alpha.bin)

DEBUG_CAM = yes

# hex dump of entire PAT

SHOW_PAT = no

# hex dump of entire PMT

SHOW_PMT = no

# hex dump of entire ECM

SHOW_ECM = no

# hex dump of entire CAT

SHOW_CAT = no

# hex dump of entire EMM (AU)

SHOW_EMM = no

# show network ECM messages being sent and received from/to the cardservers

SHOW_CWS_ECM = no

# show network EMM messages being sent and received from/to the cardservers

SHOW_CWS_EMM = no

# hex dump of EMMs with wrong signature

EMM_REPORT_WRONG_SIG = no

#

# newcamd optional settings

#

# Delay between reception of new control word and writing them into

# the CSA registers

# this is a default, can be changed for each individual key in keylist

DEFAULT_CW_DELAY = 0

# reload config on every channel zap

RELOAD_CONFIG_ON_ZAP = yes

# reload keylist on every channel zap

RELOAD_KEYLIST_ON_ZAP = yes

# write osd ca info to file

CA_INFO_FILE = /tmp/cainfo.txt

#

# newcamd mandatory settings for control word servers (cws)

#

# Cardserver list

#

# <hostname> <port> <username> <password> <14 byte triple-des key in hex> <lan/wan> <cardserver name>

#

# wan connections will be dropped and rebuild if newcamd is told so by camdcmd

# (see admin options)

#

# hostname = uds to use betad, port is the serial port in that case

#

# CWS = uds 1 dummy dummy

# CWS = linux.domain.com 10000 dummy2 dummy2 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan cardserv

# CWS = 127.0.0.1 10000 dummy3 dummy3 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan cardserv

CWS = uds 0 local local

CWS = 127.0.0.1 10001 local local 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan cardserv

#

# newcamd optional settings for using control word servers (cws)

#

# Timeout for cardserver login in 100ms

CWS_CONNECT_TIMEOUT = 20

# Port to listen for incoming cardserver connections (reverse login)

# and/or admin connections

CWS_INCOMING_PORT = 12000

# Port to get a list of all connected cardservers, just telnet to it

CWS_DEBUG_PORT = 12001

# send keep alive messages to servers to keep connections from dying by

# unreasonable router NAT timeouts, make sure all cardservers/spiders you

# conntect to are v5.25 or newer, otherwise you'll loose connection to them,

# if set to yes

# seems this feature is commonly misunderstood, it only keeps connections

# open even if no data packets are using it for while (NAT routers tend to

# forget about established tcp connections when they are inactive), it is

# NOT to automatically reconnect to servers, see also Q&A in readme.txt

CWS_KEEPALIVE = no

#

# newcamd admin control options

# (incoming port is the same as CWS_INCOMING_PORT)

#

# <password> <14 byte des key>

#

ADMIN_PASSWORD = test 00 00 00 00 00 00 00 00 00 00 00 00 00 00

 

 

Met vriendelijke groeten.

[snappie]

Je hebt het over een externe server,ik neem aan dat je via wan shared?.Ik denk dat de modjes dit niet leuk gaan vinden.Sharen over het internet is n.l taboe en mag hier niet besproken worden.

 

 

 

_________________________---

 

 

snappie

[©TheMenk©]

extern sharen!!! Ga er even vanuit dat je in je eigen netwerk bedoelt.

Dan zul je toch ook gebruikersnaam en wachtwoord en deskey moeten weten voor newcamd share. Deze gegevens moet je uit de cardserv.cfg halen. Kortom vanuit de config van waar je de server draait.

 

bv.

CWS = 111.111.111.111 XXXXX naam wachtwoord 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan naamserver

 

indien in cardserv.cfg het volgend staat

DESKEY = 01 02 03 04 05 06 07 08 09 10 11 12 13 14

SERVER_NAME = naamserver

USER = naam wachtwoord lan naamserver 12000

 

Verder is volgens mij hier al in den treure uitgelegd hoe het verder allemaal in te stellen met complete configs.

 

suc6,

 

Gr TheMenk

[Ome Merde]

Verder is volgens mij hier al in den treure uitgelegd hoe het verder allemaal in te stellen met complete configs.

 

 

inderdaad, daarom sluit ik deze dan ook.

 

 

 

merDe