Newcamd 6.04 en dm5620

[Gast]

Wie weet de instellingen om de keys van mijn canaal digitaalkaartje (DM5620) uit te

lezen. Hieronder mijn config-bestandje (neem aan dat het daarin veranderd moet worden)?

 

# /var/tuxbox/config/newcamd/newcamd.conf

#

# newcamd mandatory settings

#

# Use emulator?

EMU = yes

# if both control word server and emulator keys are available for the

# channel, which method should be tried first?

PREFER_EMU = yes

# Autoupdate for Emu and Control Word Servers

# AU is always yes if there are betad UDS control word server

# connected to newcamd

AU = yes

#

# OSD

#

# number of seconds to show the newcamd OSD, works on enigma only

# 0 seconds -> OSD off

OSD_TIMEOUT = 0

# Recent Enigma versions come with a new option "Use http authentication"

# in the Expert Setup menu. If this option is enabled, the Enigma web server

# requires all clients to authorize themselves with username (root) and

# password (usually dbox2 or dreambox). The following option tells newcamd

# about the authentication username and password to use for the web server

# in order to be able to display its on screen information.

OSD_WEB_LOGIN = root:dreambox

#

# newcamd debug options

#

# dumps all ca systems used by a channel on the console

SHOW_ALL_CA_SYSTEMS = no

# print debug messages about ECM handling

DEBUG_ECM = yes

# print debug messages about EMM handling

DEBUG_EMM = no

# print debug messages about Control Word Server (CWS)

DEBUG_CWS = yes

# print debug messages about dbox2 CAM (cam-alpha.bin)

DEBUG_CAM = yes

# hex dump of entire PAT

SHOW_PAT = no

# hex dump of entire PMT

SHOW_PMT = no

# hex dump of entire ECM

SHOW_ECM = no

# hex dump of entire CAT

SHOW_CAT = no

# hex dump of entire EMM (AU)

SHOW_EMM = no

# show network ECM messages being sent and received from/to the cardservers

SHOW_CWS_ECM = no

# show network EMM messages being sent and received from/to the cardservers

SHOW_CWS_EMM = no

# hex dump of EMMs with wrong signature

EMM_REPORT_WRONG_SIG = no

#

# newcamd optional settings

#

# Delay between reception of new control word and writing them into

# the CSA registers

# this is a default, can be changed for each individual key in keylist

DEFAULT_CW_DELAY = 0

# reload config on every channel zap

RELOAD_CONFIG_ON_ZAP = yes

# reload keylist on every channel zap

RELOAD_KEYLIST_ON_ZAP = no

# write osd ca info to file

CA_INFO_FILE = /tmp/cainfo.txt

#

# newcamd mandatory settings for control word servers (cws)

#

# Cardserver list

#

# <hostname> <port> <username> <password> <14 byte triple-des key in hex> <lan/wan> <cardserver name>

#

# wan connections will be dropped and rebuild if newcamd is told so by camdcmd

# (see admin options)

#

# hostname = uds to use betad, port is the serial port in that case

#

# CWS = uds 1 dummy dummy

# CWS = linux.domain.com 10000 dummy2 dummy2 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan cardserv

# CWS = 127.0.0.1 10000 dummy3 dummy3 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan cardserv

CWS = uds 0 local local

CWS = 127.0.0.1 10001 local local 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan cardserv

#

# newcamd optional settings for using control word servers (cws)

#

# Timeout for cardserver login in 100ms

CWS_CONNECT_TIMEOUT = 20

# Port to listen for incoming cardserver connections (reverse login)

# and/or admin connections

CWS_INCOMING_PORT = 12000

# Port to get a list of all connected cardservers, just telnet to it

CWS_DEBUG_PORT = 12001

# send keep alive messages to servers to keep connections from dying by

# unreasonable router NAT timeouts, make sure all cardservers/spiders you

# conntect to are v5.25 or newer, otherwise you'll loose connection to them,

# if set to yes

# seems this feature is commonly misunderstood, it only keeps connections

# open even if no data packets are using it for while (NAT routers tend to

# forget about established tcp connections when they are inactive), it is

# NOT to automatically reconnect to servers, see also Q&A in readme.txt

CWS_KEEPALIVE = no

#

# newcamd admin control options

# (incoming port is the same as CWS_INCOMING_PORT)

#

# <password> <14 byte des key>

#

ADMIN_PASSWORD = test 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <img src="/forums/images/graemlins/confused.gif" alt="" />

[Ome Merde]

je bedoelt de entitlements ? (dus de verloopdatum zeg maar).

 

 

telnet ip.adres.van.dreambox 14001 in een dosbox. wees er zeker van dat cardserver draait (in telnet met het commando ps. cardserver, cardserv, cards6_x, iets in de geest moet in je lijstje voorkomen.

of je installeerd CIC3.0 (Card Info Centre), even de zoekmachine gebruiken om die te vinden.

 

 

 

 

merDe

[Gast]

Nee dat bedoel ik niet, wil graag dat mijn kaartje gaat werken met Newcamd en daarvoor moet ie de keys gebruiken van het kaartje. Maar ik moet het slot instellen waar het kaartje zit, waarschijnlijk kan je dat instellen in de config-file?

[satvet]

Volgens mij kijkt hij al naar je kaartje via poort 12000 en 12001, maar mogelijk moet je prefer emu nog even op no zetten, soms heb je ongeldige k*ys voor het kanaal die niet werken en dan kijkt Newcamd naar die k*ys in plaats van de geldige keys op je kaart (ik neem aan dat ik keys mag zeggen als ik verwijs naar geldige keys op een geldige kaart <img src="/forums/images/graemlins/loldev.gif" alt="" />)

 

Maar het makkelijkste is om een geldige configuratie te downloaden via je image.

Welk image heb je? Pli, Gemini en Hydra o.a. bieden een werkende configuratie via de download.

[boekkie]

newcamd.conf

 

CWS_MULTIPLE = 127.0.0.1 10000:10001 local local 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan cardserv

 

 

cardserv.cfg

SERIAL_PORT = 0

TCP_PORT = 10000

SERIAL_PORT = 1

TCP_PORT = 10001

 

Op de DM 5620 en 500,gebruikt hij SERIAL_PORT = 0

Is niet logisch,dit met newcamd 6.04.

 

Maar als je dit in je newcamd.conf en cardserv.cfg plaatst,werkt de kaart altijd!!

[Gast]

Heb volgens mij gedaan wat je hebt beschreven, maar helaas nog geen beeld met mijn kaartje, hieronder nog even mijn files:

 

Cardserv.cfg:

 

DESKEY = 01 02 03 04 05 06 07 08 09 10 11 12 13 14

SERVER_NAME = cardserv

DEBUG_PORT = 14000

ENTITLEMENT_PORT = 14001

ADMIN_PORT = 14002

ADMIN_PASSWORD = secret 00 00 00 00 00 00 00 00 00 00 00 00 00 00

USER = local local lan 127.0.0.1 12000

USER = spider spider lan 127.0.0.1 15003

DEBUG_INIT = no

DEBUG_NET = no

DEBUG_ECM = no

DEBUG_EMM = no

#SERIAL_PORT = 0

#TCP_PORT = 10000

SERIAL_PORT = 0

TCP_PORT = 10000

 

 

Newcamd.conf:

 

# Cardserver list

#

# <hostname> <port> <username> <password> <14 byte triple-des key in hex> <lan/wan> <cardserver name>

#

# wan connections will be dropped and rebuild if newcamd is told so by camdcmd

# (see admin options)

#

# hostname = uds to use betad, port is the serial port in that case

#

# CWS = uds 1 dummy dummy

# CWS = linux.domain.com 10000 dummy2 dummy2 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan cardserv

# CWS = 127.0.0.1 10000 dummy3 dummy3 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan cardserv

CWS = uds 1 local local

CWS = 127.0.0.1 10000:10001 local local 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan cardserv

#

# newcamd optional settings for using control word servers (cws)

#

# Timeout for cardserver login in 100ms

CWS_CONNECT_TIMEOUT = 20

# Port to listen for incoming cardserver connections (reverse login)

# and/or admin connections

CWS_INCOMING_PORT = 12000

# Port to get a list of all connected cardservers, just telnet to it

CWS_DEBUG_PORT = 12001

# send keep alive messages to servers to keep connections from dying by

# unreasonable router NAT timeouts, make sure all cardservers/spiders you

# conntect to are v5.25 or newer, otherwise you'll loose connection to them,

# if set to yes

# seems this feature is commonly misunderstood, it only keeps connections

# open even if no data packets are using it for while (NAT routers tend to

# forget about established tcp connections when they are inactive), it is

# NOT to automatically reconnect to servers, see also Q&A in readme.txt

CWS_KEEPALIVE = no

#

# newcamd admin control options

# (incoming port is the same as CWS_INCOMING_PORT)

#

# <password> <14 byte des key>

[boekkie]

#SERIAL_PORT = 0

#TCP_PORT = 10000

SERIAL_PORT = 0

TCP_PORT = 10000

 

Verwijder die twee # eens <img src="/forums/images/graemlins/biggthumpup.gif" alt="" />

 

CWS = 127.0.0.1 10000:10001 local local 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan cardserv (is fout)

 

CWS_MULTIPLE = 127.0.0.1 10000:10001 local local 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan cardserv

<img src="/forums/images/graemlins/biggthumpup.gif" alt="" />

 

[Gast]

Bedankt voor de moeite die je heb gedaan boekkie, het is gelukt. Hele fijne feestdagen en natuurlijk ook voor alle andere Sat-fans.