bash! Geplaatst: 1 februari 2007 Geplaatst: 1 februari 2007 Ik ben aan het proberen een dm7000 opnieuw leven in te blazen. Ik kom steeds wat verder maar nog niet ver genoeg! Nu krijg ik een melding dat hij de FP niet kan vinden. Is er iemand die hier ervaring mee heeft? Dreambox DM7000 loaded at: 00500000 00615170 relocated to: 00400000 00515170 board data at: 00513124 00513170 relocated to: 00405194 004051E0 zimage at: 004058D5 00512428 avail ram: 00516000 02000000 Linux/PPC load: console=ttyS0,115200 root=/dev/mtdblock5 rootfstype=squashfs Uncompressing Linux...done. Now booting the kernel Linux version 2.6.9 (peter@dreamer.lindeman.nl) (gcc version 3.4.4) #1 Sun May 21 12:29:03 CEST 2006 Built 1 zonelists Kernel command line: console=ttyS0,115200 root=/dev/mtdblock5 rootfstype=squashfs PID hash table entries: 256 (order: 8, 4096 bytes) Console: colour dummy device 80x25 Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) Memory: 29904k available (1896k kernel code, 524k data, 80k init, 0k highmem) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) NET: Registered protocol family 16 SCSI subsystem initialized drivers/usb/core/usb.c: registered new driver usbfs drivers/usb/core/usb.c: registered new driver hub Squashfs 2.2-r2 (released 2005/09/08) © 2002-2005 Phillip Lougher devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x1 JFFS2 version 2.2. © 2001-2003 Red Hat, Inc. Serial: 8250/16550 driver $Revision: 1.90 $ 7 ports, IRQ sharing disabled ttyS0 at MMIO 0x0 (irq = 20) is a 16550A ttyS1 at MMIO 0x0 (irq = 21) is a 16550A ttyS2 at MMIO 0x0 (irq = 31) is a 16550A loop: loaded (max 8 devices) smc91x.c: v1.1, sep 22 2004 by Nicolas Pitre <nico@cam.org> eth0: SMC91C11xFD (rev 1) at 0xc305e300 IRQ 28 [nowait] eth0: Ethernet addr: 00:09:34:ba:da:dd Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx IBM STB04xxx OCP IDE driver version 2.3 hda: MAXTOR 6L040J2, ATA DISK drive Using deadline io scheduler ide0 at 0xc30601f8-0xc30601ff,0xc30601f6 on irq 25 hda: max request size: 128KiB hda: 78177792 sectors (40027 MB) w/1819KiB Cache, CHS=65535/16/63, UDMA(33) /dev/ide/host0/bus0/target0/lun0: p1 dreambox: flash mapping: 800000 at 7f800000 DreamBOX rev3+: Found 1 x16 devices at 0x0 in 16-bit bank Intel/Sharp Extended Query Table at 0x0031 Using buffer write method cfi_cmdset_0001: Erase suspend on write enabled disable flash VPP Creating 7 MTD partitions on "DreamBOX rev3+": 0x00000000-0x00600000 : "DreamBOX cramfs+squashfs" 0x00600000-0x007c0000 : "DreamBOX jffs2" 0x007c0000-0x00800000 : "DreamBOX OpenBIOS" 0x00000000-0x007c0000 : "DreamBOX (w/o bootloader)" 0x00000000-0x00800000 : "DreamBOX (w/ bootloader)" 0x00120000-0x00600000 : "DreamBOX SquashedFS" 0x00000000-0x00120000 : "DreamBOX Cramfs" drivers/usb/host/ohci-ocp.c: ohci_hcd (OCP) at 0xe0010000, irq 18 ocp_usb 07: new USB bus registered, assigned bus number 1 hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected Initializing USB Mass Storage driver... drivers/usb/core/usb.c: registered new driver usb-storage USB Mass Storage support registered. mice: PS/2 mouse device common for all mice i2c /dev entries driver IBM IIC driver v2.1 ibm-iic0: using standard (100 kHz) mode ibm-iic1: using standard (100 kHz) mode NET: Registered protocol family 2 IP: routing cache hash table of 512 buckets, 4Kbytes TCP: Hash tables configured (established 2048 bind 4096) NET: Registered protocol family 1 NET: Registered protocol family 17 VFS: Mounted root (squashfs filesystem) readonly. Mounted devfs on /dev Freeing unused kernel memory: 80k init init started: BusyBox v1.01 (2006.05.21-10:30+0000) multi-call binary ==== Starting rcS head: module license 'Proprietary' taints kernel. clear mem...done. Kernel panic - not syncing: no fp found. <0>Rebooting in 180 seconds.. There is nothing wrong with having a strong opinion... if it comes with an open mind!
bash! Geplaatst: 1 februari 2007 Auteur Geplaatst: 1 februari 2007 Weet iemand een mogelijkheid om de FP te testen of handmatig te programmeren? There is nothing wrong with having a strong opinion... if it comes with an open mind!
dAF2000 Geplaatst: 1 februari 2007 Geplaatst: 1 februari 2007 Je komt in ieder geval tot "==== Starting rcS" en dat is wel hoopgevend. De Dreambox komt in ieder geval al zo ver dat-ie begint met de PLi image op te starten. Heb je 'em wel 'ns opnieuw geflasht?
bash! Geplaatst: 1 februari 2007 Auteur Geplaatst: 1 februari 2007 Meerdere malen geflasht.. met originele dmm software (1.02 t/m 1.09) en verschillende andere versies. Tussendoor ook steeds erase.img eropgezet. Er blijft dus iets misgaan! There is nothing wrong with having a strong opinion... if it comes with an open mind!
rongogo Geplaatst: 1 februari 2007 Geplaatst: 1 februari 2007 Citaat: Meerdere malen geflasht.. met originele dmm software (1.02 t/m 1.09) en verschillende andere versies. Tussendoor ook steeds erase.img eropgezet. Er blijft dus iets misgaan! Dus ook met de orginele images neem ik aan, of starten die wel door ? En welke pli versie gebruik je, ik zie iets van mei 2006 staan. grtz RGG
bash! Geplaatst: 1 februari 2007 Auteur Geplaatst: 1 februari 2007 dit was de laatste PLi, maar ook met de officiele Dream images loopt hij niet door. Ik heb al de nodige dreamboxen onder handen gehad, maar dit ben ik nog niet eerder tegengekomen! There is nothing wrong with having a strong opinion... if it comes with an open mind!
bash! Geplaatst: 2 februari 2007 Auteur Geplaatst: 2 februari 2007 Niemand een idee?? <img src="/forums/images/graemlins/frown.gif" alt="" /> There is nothing wrong with having a strong opinion... if it comes with an open mind!
Littlesat Geplaatst: 2 februari 2007 Geplaatst: 2 februari 2007 (fp=) Frontprocessor defect? Binnenkort is bijna alles in MPEG4 bij CanalDigitaal... je SD ontvanger kan dus in de Kliko
bash! Geplaatst: 2 februari 2007 Auteur Geplaatst: 2 februari 2007 Dat zou kunnen.. maar komt dit vaker voor? ik heb er nog nooit van gehoord! There is nothing wrong with having a strong opinion... if it comes with an open mind!
rongogo Geplaatst: 3 februari 2007 Geplaatst: 3 februari 2007 Ik heb het eerlijk gezegd nog nooit eerder gehoord. Maar als je geen gerantie meer hebt, zou ik eens aan een image bakker vragen, of ie een image braadt, met de Fp 1 versie gefaked verhoogd, zodat ie hem nog eens update als je het image installeerd. grtz RGG
bash! Geplaatst: 3 februari 2007 Auteur Geplaatst: 3 februari 2007 Wordt de FP niet ge-upgrade na het booten van de image? De box start nog niet door naar de image zelf. Ik kon met een 1.02 image wel in busybox komen en eea uitvoeren zoals een eraseall /dev/mtd/1 Verder kom ik niet.... There is nothing wrong with having a strong opinion... if it comes with an open mind!
rongogo Geplaatst: 4 februari 2007 Geplaatst: 4 februari 2007 Volgens mij gebeurd dit onder de eerste startup, ik weet niet of dit een mogenlijke oplossing is, misschien dat er nog anderen zijn die dit afraden, of toch een goed idee vinden. grtz RGG
bash! Geplaatst: 4 februari 2007 Auteur Geplaatst: 4 februari 2007 Geen idee, ik heb op een duits forum een stukje gelezen, maar dat is te vaag... Als ik een 1.08 of lager installeer kom ik uiteindelijk in een shell en heb ik dus de mogelijkheid eea te doen. Dit is wel een van de vroegere dreamboxen (mijn eerste) welke nu bij mijn vader stond. Gr BaZ There is nothing wrong with having a strong opinion... if it comes with an open mind!
bash! Geplaatst: 4 februari 2007 Auteur Geplaatst: 4 februari 2007 Laatste output: Dreambox DM7000 loaded at: 00500000 0061C204 relocated to: 00400000 0051C204 board data at: 00519128 00519174 relocated to: 0040546C 004054B8 zimage at: 004059D8 00518FF4 avail ram: 0051D000 02000000 Linux/PPC load: console=ttyS0,115200 root=/dev/mtdblock5 rootfstype=squashfs Uncompressing Linux...done. Now booting the kernel Linux version 2.6.5 (ghost@client) (gcc version 3.2.3) #36 Sat May 15 15:53:35 CEST 2004 On node 0 totalpages: 8192 DMA zone: 8192 pages, LIFO batch:2 Normal zone: 0 pages, LIFO batch:1 HighMem zone: 0 pages, LIFO batch:1 Built 1 zonelists Kernel command line: console=ttyS0,115200 root=/dev/mtdblock5 rootfstype=squashfs PID hash table entries: 256 (order 8: 2048 bytes) Console: colour dummy device 80x25 Memory: 29712k available (1984k kernel code, 608k data, 80k init, 0k highmem) Calibrating delay loop... 250.88 BogoMIPS Dentry cache hash table entries: 4096 (order: 2, 16384 bytes) Inode-cache hash table entries: 2048 (order: 1, 8192 bytes) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) POSIX conformance testing by UNIFIX NET: Registered protocol family 16 SCSI subsystem initialized drivers/usb/core/usb.c: registered new driver usbfs drivers/usb/core/usb.c: registered new driver hub devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x1 JFFS2 version 2.2. © 2001-2003 Red Hat, Inc. Serial: 8250/16550 driver $Revision: 1.90 $ 7 ports, IRQ sharing disabled ttyS0 at MMIO 0x0 (irq = 20) is a 16550A ttyS1 at MMIO 0x0 (irq = 21) is a 16550A ttyS2 at MMIO 0x0 (irq = 31) is a 16550A loop: loaded (max 8 devices) smc91111.c:v1.0saa 08/22/01 by Daris A Nevil (dnevil@snmc.com) eth%d: SMC91C11xFD(r:1) at 0xc306a300 IRQ:28 MEM:8192b NOWAIT:0 ADDR 00:09:34:ba:da:dd irq 28 setup to non-critical Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx OCP ide ver:2.0 IBM STB04xxx IDE driver version 2.0 mapped 400f0000 to c306c000 OCP ide: waiting for drive spinupioports for drive 0 @ c0290af0 ..Drive spun up Probing IDE interface ide0... Using anticipatory io scheduler dreambox: flash mapping: 800000 at 7f800000 cfi_cmdset_0001: Erase suspend on write enabled Using buffer write method disable flash VPP Creating 6 MTD partitions on "DreamBOX rev3+": 0x00000000-0x00600000 : "DreamBOX cramfs" 0x00600000-0x007c0000 : "DreamBOX jffs2" 0x007c0000-0x00800000 : "DreamBOX OpenBIOS" 0x00000000-0x007c0000 : "DreamBOX (w/o bootloader)" 0x00000000-0x00800000 : "DreamBOX (w/ bootloader)" 0x00120000-0x00600000 : "DreamBOX SquashedFS" USB #0 at 0xe0010000 irq 18 setup to non-critical drivers/usb/host/ohci-ocp.c: ohci_hcd (OCP) at 0xe0010000, irq 18 ocp_usb 7: new USB bus registered, assigned bus number 1 usb usb1: Product: OCP OHCI usb usb1: Manufacturer: Linux 2.6.5 ohci_hcd usb usb1: SerialNumber: ocp hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected Initializing USB Mass Storage driver... drivers/usb/core/usb.c: registered new driver usb-storage USB Mass Storage support registered. mice: PS/2 mouse device common for all mice i2c /dev entries driver IBM IIC driver v2.0 irq 9 setup to non-critical ibm-iic0: clckdiv = 6 ibm-iic0: init ibm-iic0: using standard (100 kHz) mode irq 10 setup to non-critical ibm-iic1: clckdiv = 6 ibm-iic1: init ibm-iic1: using standard (100 kHz) mode NET: Registered protocol family 2 IP: routing cache hash table of 512 buckets, 4Kbytes TCP: Hash tables configured (established 2048 bind 4096) NET: Registered protocol family 1 NET: Registered protocol family 17 VFS: Mounted root (squashfs filesystem) readonly. Mounted devfs on /dev Freeing unused kernel memory: 80k init irq 20 setup to non-critical irq 20 setup to non-critical irq 20 setup to non-critical fb26: module license 'proprietary' taints kernel. fb: loaded using a0900000 as framebuffer base pfb_check_var: xres 640 != 720 pfb_check_var: xres 640 != 720 pfb_check_var: xres 640 != 720 pfb_check_var: xres 800 != 720 pfb_check_var: xres 1024 != 720 pfb_check_var: xres 640 != 720 pfb_check_var: xres 640 != 720 pfb_check_var: xres 640 != 720 pfb_check_var: xres 800 != 720 pfb_check_var: xres 640 != 720 pfb_check_var: xres 1152 != 720 pfb_check_var: xres 800 != 720 pfb_check_var: xres 1024 != 720 pfb_check_var: xres 640 != 720 pfb_check_var: xres 1152 != 720 pfb_check_var: xres 800 != 720 pfb_check_var: xres 1024 != 720 pfb_check_var: xres 1280 != 720 pfb_check_var: xres 800 != 720 pfb_check_var: xres 1024 != 720 pfb_check_var: xres 1152 != 720 pfb_check_var: xres 1280 != 720 pfb_check_var: xres 1400 != 720 pfb_check_var: xres 1400 != 720 pfb_check_var: xres 1400 != 720 pfb_check_var: xres 1024 != 720 pfb_check_var: xres 1152 != 720 pfb_check_var: xres 1280 != 720 pfb_check_var: xres 1600 != 720 pfb_check_var: xres 1152 != 720 pfb_check_var: xres 1280 != 720 pfb_check_var: xres 1024 != 720 pfb_check_var: xres 1280 != 720 pfb_check_var: xres 1600 != 720 pfb_check_var: xres 1152 != 720 pfb_check_var: xres 1280 != 720 pfb_check_var: xres 1600 != 720 pfb_check_var: xres 1600 != 720 pfb_check_var: xres 1280 != 720 pfb_check_var: xres 1800 != 720 pfb_check_var: xres 1800 != 720 pfb_check_var: xres 512 != 720 pfb_check_var: xres 512 != 720 pfb_check_var: xres 320 != 720 pfb_check_var: xres 320 != 720 pfb_check_var: xres 320 != 720 pfb_check_var: xres 400 != 720 pfb_check_var: xres 400 != 720 pfb_check_var: xres 400 != 720 pfb_check_var: xres 480 != 720 pfb_check_var: xres 480 != 720 pfb_check_var: xres 480 != 720 pfb_check_var: xres 480 != 720 VID_DISP_MODE set to 0088e6c0 registered framebuffer head: module license 'proprietary' taints kernel. ibm-iic0: iic_xfer, bus is not free ibm-iic0: soft reset ibm-iic0: init ibm-iic0: wait timeout ibm-iic0: iic_abort_xfer ibm-iic0: abort timeout, resetting... ibm-iic0: soft reset ibm-iic0: init ibm-iic1: xfer error, EXTSTS = 0x43 Kernel panic: no fp found. <0>Rebooting in 180 seconds.. There is nothing wrong with having a strong opinion... if it comes with an open mind!
Ome Merde Geplaatst: 4 februari 2007 Geplaatst: 4 februari 2007 waag eens een mailtje naar DMM : support@Dream-Multimedia-Tv.de merDe deze ruimte is te huur
Aanbevolen berichten
Maak een account aan of log in om te reageren
Je moet een lid zijn om een reactie te kunnen achterlaten
Account aanmaken
Registreer voor een nieuwe account in onze community. Het is erg gemakkelijk!
Registreer een nieuwe accountInloggen
Heb je reeds een account? Log hier in.
Nu inloggen