NewCS 1.60 en Irdeto2

[nextkiller]

dit is de output op 357 (newcs config)

Code:

[ 21:00:31 ] [ Loader ] Reset failed ...[ 21:00:31 ] [ Loader ] Reader type 4 on node /dev/tts/1[ 21:00:31 ] [ Dbox ] Opening device /dev/tts/1[ 21:00:31 ] [ Serial ] Communication mode: 8o2[ 21:00:31 ] [ Serial ] Adjusting to 1 stopbit[ 21:00:31 ] [ Dbox ] Setting Baud to 9600[ 21:00:32 ] [ Loader ] Reset failed ...[ 21:00:32 ] [ Loader ] Reader type 4 on node /dev/tts/1[ 21:00:32 ] [ Dbox ] Opening device /dev/tts/1[ 21:00:32 ] [ Serial ] Communication mode: 8o2[ 21:00:32 ] [ Serial ] Adjusting to 1 stopbit[ 21:00:32 ] [ Dbox ] Setting Baud to 9600[ 21:00:33 ] [ Loader ] Reset failed ...[ 21:00:33 ] [ Loader ] Reader type 4 on node /dev/tts/1[ 21:00:33 ] [ Dbox ] Opening device /dev/tts/1[ 21:00:33 ] [ Serial ] Communication mode: 8o2[ 21:00:33 ] [ Serial ] Adjusting to 1 stopbit[ 21:00:33 ] [ Dbox ] Setting Baud to 9600[ 21:00:34 ] [ Loader ] Reset failed ...[ 21:00:34 ] [ Loader ] Reader type 4 on node /dev/tts/1[ 21:00:34 ] [ Dbox ] Opening device /dev/tts/1[ 21:00:34 ] [ Serial ] Communication mode: 8o2[ 21:00:34 ] [ Serial ] Adjusting to 1 stopbit[ 21:00:34 ] [ Dbox ] Setting Baud to 9600[ 21:00:35 ] [ Loader ] Reset failed ...[ 21:00:35 ] [ Loader ] Reader type 4 on node /dev/tts/1[ 21:00:35 ] [ Dbox ] Opening device /dev/tts/1[ 21:00:35 ] [ Serial ] Communication mode: 8o2[ 21:00:35 ] [ Serial ] Adjusting to 1 stopbit[ 21:00:35 ] [ Dbox ] Setting Baud to 9600[ 21:00:36 ] [ Loader ] Reset failed ...[ 21:00:36 ] [ Loader ] Reader type 4 on node /dev/tts/1[ 21:00:36 ] [ Dbox ] Opening device /dev/tts/1[ 21:00:36 ] [ Serial ] Communication mode: 8o2[ 21:00:36 ] [ Serial ] Adjusting to 1 stopbit[ 21:00:36 ] [ Dbox ] Setting Baud to 9600[ 21:00:37 ] [ Loader ] Reset failed ...[ 21:00:37 ] [ Loader ] Reader type 4 on node /dev/tts/1[ 21:00:37 ] [ Dbox ] Opening device /dev/tts/1[ 21:00:37 ] [ Serial ] Communication mode: 8o2[ 21:00:37 ] [ Serial ] Adjusting to 1 stopbit[ 21:00:37 ] [ Dbox ] Setting Baud to 9600[ 21:00:38 ] [ Loader ] Reset failed ...[ 21:00:38 ] [ Loader ] Reader type 4 on node /dev/tts/1[ 21:00:38 ] [ Dbox ] Opening device /dev/tts/1[ 21:00:38 ] [ Serial ] Communication mode: 8o2[ 21:00:38 ] [ Serial ] Adjusting to 1 stopbit[ 21:00:38 ] [ Dbox ] Setting Baud to 9600[ 21:00:39 ] [ Loader ] Reset failed ...[ 21:00:39 ] [ Loader ] Reader type 4 on node /dev/tts/1[ 21:00:39 ] [ Dbox ] Opening device /dev/tts/1[ 21:00:39 ] [ Serial ] Communication mode: 8o2[ 21:00:39 ] [ Serial ] Adjusting to 1 stopbit[ 21:00:39 ] [ Dbox ] Setting Baud to 9600[ 21:00:40 ] [ Loader ] Reset failed ...[ 21:00:40 ] [ Loader ] Reader type 4 on node /dev/tts/1[ 21:00:40 ] [ Dbox ] Opening device /dev/tts/1[ 21:00:40 ] [ Serial ] Communication mode: 8o2[ 21:00:40 ] [ Serial ] Adjusting to 1 stopbit[ 21:00:40 ] [ Dbox ] Setting Baud to 9600[ 21:00:41 ] [ Loader ] Reset failed ...[ 21:00:41 ] [ Loader ] Reader type 4 on node /dev/tts/1[ 21:00:41 ] [ Dbox ] Opening device /dev/tts/1[ 21:00:41 ] [ Serial ] Communication mode: 8o2[ 21:00:41 ] [ Serial ] Adjusting to 1 stopbit[ 21:00:41 ] [ Dbox ] Setting Baud to 9600[ 21:00:42 ] [ Loader ] Reset failed ...[ 21:00:42 ] [ Loader ] Reader type 4 on node /dev/tts/1[ 21:00:42 ] [ Dbox ] Opening device /dev/tts/1[ 21:00:42 ] [ Serial ] Communication mode: 8o2[ 21:00:42 ] [ Serial ] Adjusting to 1 stopbit[ 21:00:42 ] [ Dbox ] Setting Baud to 9600[ 21:00:43 ] [ Loader ] Reset failed ...[ 21:00:43 ] [ Loader ] Reader type 4 on node /dev/tts/1[ 21:00:43 ] [ Dbox ] Opening device /dev/tts/1[ 21:00:43 ] [ Serial ] Communication mode: 8o2[ 21:00:43 ] [ Serial ] Adjusting to 1 stopbit[ 21:00:43 ] [ Dbox ] Setting Baud to 9600[ 21:00:44 ] [ Serial ] Read on fd 9 (len=5 timeout=5300ms)[ 21:00:44 ] Phoenix_read: 00 80 1F 00 3E[ 21:00:44 ] [ CardMan ] Atr header is 00 80 [NORMAL][ 21:00:44 ] [ Loader ] Unknown card[ 21:00:44 ] [ Loader ] Trying Irdeto (T=14)[ 21:00:44 ] [ Loader ] Reader type 4 on node /dev/tts/1[ 21:00:44 ] [ Dbox ] Opening device /dev/tts/1[ 21:00:44 ] [ Serial ] Communication mode: 8o2[ 21:00:44 ] [ Serial ] Adjusting to 1 stopbit[ 21:00:44 ] [ Dbox ] Setting Baud to 5713[ 21:00:45 ] [ Loader ] Reset failed ...[ 21:00:45 ] [ Loader ] Starting Newcamd Server on port 15000[ 21:00:45 ] [ Newcamd ] Newcamd thread Server started on port 15000[ 21:00:45 ] bind: error! 98: Address already in use[ 21:00:45 ] [ Newcamd ] Stopping port 15000[ 21:00:53 ] [ Loader ] Reader type 4 on node /dev/tts/1[ 21:00:53 ] [ Dbox ] Opening device /dev/tts/1[ 21:00:53 ] [ Serial ] Communication mode: 8o2[ 21:00:53 ] [ Serial ] Adjusting to 1 stopbit[ 21:00:53 ] [ Dbox ] Setting Baud to 5713[ 21:00:54 ] [ Loader ] Reset failed ...[ 21:00:54 ] [ Loader ] Reader type 4 on node /dev/tts/1[ 21:00:54 ] [ Dbox ] Opening device /dev/tts/1[ 21:00:54 ] [ Serial ] Communication mode: 8o2[ 21:00:54 ] [ Serial ] Adjusting to 1 stopbit[ 21:00:54 ] [ Dbox ] Setting Baud to 5713[ 21:00:55 ] [ Loader ] Reset failed ...[ 21:00:55 ] [ Loader ] Reader type 4 on node /dev/tts/1[ 21:00:55 ] [ Dbox ] Opening device /dev/tts/1[ 21:00:55 ] [ Serial ] Communication mode: 8o2[ 21:00:55 ] [ Serial ] Adjusting to 1 stopbit[ 21:00:55 ] [ Dbox ] Setting Baud to 5713[ 21:00:56 ] [ Loader ] Reset failed ...[ 21:00:56 ] [ Loader ] Reader type 4 on node /dev/tts/1[ 21:00:56 ] [ Dbox ] Opening device /dev/tts/1[ 21:00:56 ] [ Serial ] Communication mode: 8o2[ 21:00:56 ] [ Serial ] Adjusting to 1 stopbit[ 21:00:56 ] [ Dbox ] Setting Baud to 5713[ 21:00:57 ] [ Loader ] Reset failed ...[ 21:00:57 ] [ Loader ] Reader type 4 on node /dev/tts/1[ 21:00:57 ] [ Dbox ] Opening device /dev/tts/1[ 21:00:57 ] [ Serial ] Communication mode: 8o2[ 21:00:57 ] [ Serial ] Adjusting to 1 stopbit[ 21:00:57 ] [ Dbox ] Setting Baud to 5713[ 21:00:58 ] [ Loader ] Reset failed ...[ 21:00:58 ] [ Loader ] Reader type 4 on node /dev/tts/1[ 21:00:58 ] [ Dbox ] Opening device /dev/tts/1[ 21:00:58 ] [ Serial ] Communication mode: 8o2[ 21:00:58 ] [ Serial ] Adjusting to 1 stopbit[ 21:00:58 ] [ Dbox ] Setting Baud to 5713[ 21:00:59 ] [ Loader ] Reset failed ...[ 21:00:59 ] [ Loader ] Reader type 4 on node /dev/tts/1[ 21:00:59 ] [ Dbox ] Opening device /dev/tts/1[ 21:00:59 ] [ Serial ] Communication mode: 8o2[ 21:00:59 ] [ Serial ] Adjusting to 1 stopbit[ 21:00:59 ] [ Dbox ] Setting Baud to 5713[ 21:01:00 ] [ Loader ] Reset failed ...[ 21:01:00 ] [ Loader ] Reader type 4 on node /dev/tts/1[ 21:01:00 ] [ Dbox ] Opening device /dev/tts/1[ 21:01:00 ] [ Serial ] Communication mode: 8o2[ 21:01:00 ] [ Serial ] Adjusting to 1 stopbit[ 21:01:00 ] [ Dbox ] Setting Baud to 5713[ 21:01:01 ] [ Loader ] Reset failed ...[ 21:01:01 ] [ Loader ] Reader type 4 on node /dev/tts/1[ 21:01:01 ] [ Dbox ] Opening device /dev/tts/1[ 21:01:01 ] [ Serial ] Communication mode: 8o2[ 21:01:01 ] [ Serial ] Adjusting to 1 stopbit[ 21:01:01 ] [ Dbox ] Setting Baud to 5713[ 21:01:02 ] [ Serial ] Read on fd 9 (len=4 timeout=5300ms)[ 21:01:02 ] Phoenix_read: B1 80 00 00[ 21:01:02 ] [ CardMan ] Atr header is B1 80 [NORMAL][ 21:01:02 ] [ Loader ] Unknown card[ 21:01:02 ] [ Loader ] Trying Irdeto (T=14)[ 21:01:02 ] [ Loader ] Reader type 4 on node /dev/tts/1[ 21:01:02 ] [ Dbox ] Opening device /dev/tts/1[ 21:01:02 ] [ Serial ] Communication mode: 8o2[ 21:01:02 ] [ Serial ] Adjusting to 1 stopbit[ 21:01:02 ] [ Dbox ] Setting Baud to 5713[ 21:01:03 ] [ Loader ] Reset failed ...[ 21:01:09 ] [ Loader ] Reader type 4 on node /dev/tts/1[ 21:01:09 ] [ Dbox ] Opening device /dev/tts/1[ 21:01:09 ] [ Serial ] Communication mode: 8o2[ 21:01:09 ] [ Serial ] Adjusting to 1 stopbit[ 21:01:09 ] [ Dbox ] Setting Baud to 5713[ 21:01:10 ] [ Loader ] Reset failed ...[ 21:01:10 ] [ Loader ] Reader type 4 on node /dev/tts/1[ 21:01:10 ] [ Dbox ] Opening device /dev/tts/1[ 21:01:10 ] [ Serial ] Communication mode: 8o2[ 21:01:10 ] [ Serial ] Adjusting to 1 stopbit[ 21:01:10 ] [ Dbox ] Setting Baud to 5713[ 21:01:11 ] [ Loader ] Reset failed ...[ 21:01:11 ] [ Loader ] Reader type 4 on node /dev/tts/1[ 21:01:11 ] [ Dbox ] Opening device /dev/tts/1[ 21:01:11 ] [ Serial ] Communication mode: 8o2[ 21:01:11 ] [ Serial ] Adjusting to 1 stopbit[ 21:01:11 ] [ Dbox ] Setting Baud to 5713[ 21:01:12 ] [ Loader ] Reset failed ...[ 21:01:12 ] [ Loader ] Reader type 4 on node /dev/tts/1[ 21:01:12 ] [ Dbox ] Opening device /dev/tts/1[ 21:01:12 ] [ Serial ] Communication mode: 8o2[ 21:01:12 ] [ Serial ] Adjusting to 1 stopbit[ 21:01:12 ] [ Dbox ] Setting Baud to 5713[ 21:01:13 ] [ Loader ] Reset failed ...[ 21:01:13 ] [ Loader ] Reader type 4 on node /dev/tts/1[ 21:01:13 ] [ Dbox ] Opening device /dev/tts/1[ 21:01:13 ] [ Serial ] Communication mode: 8o2[ 21:01:13 ] [ Serial ] Adjusting to 1 stopbit[ 21:01:13 ] [ Dbox ] Setting Baud to 5713[ 21:01:14 ] [ Loader ] Reset failed ...[ 21:01:14 ] [ Loader ] Reader type 4 on node /dev/tts/1[ 21:01:14 ] [ Dbox ] Opening device /dev/tts/1[ 21:01:14 ] [ Serial ] Communication mode: 8o2[ 21:01:14 ] [ Serial ] Adjusting to 1 stopbit[ 21:01:14 ] [ Dbox ] Setting Baud to 5713[ 21:01:15 ] [ Loader ] Reset failed ...[ 21:01:15 ] [ Loader ] Reader type 4 on node /dev/tts/1[ 21:01:15 ] [ Dbox ] Opening device /dev/tts/1[ 21:01:15 ] [ Serial ] Communication mode: 8o2[ 21:01:15 ] [ Serial ] Adjusting to 1 stopbit[ 21:01:15 ] [ Dbox ] Setting Baud to 5713[ 21:01:16 ] [ Loader ] Reset failed ...[ 21:01:16 ] [ Loader ] Reader type 4 on node /dev/tts/1[ 21:01:16 ] [ Dbox ] Opening device /dev/tts/1[ 21:01:16 ] [ Serial ] Communication mode: 8o2[ 21:01:16 ] [ Serial ] Adjusting to 1 stopbit[ 21:01:16 ] [ Dbox ] Setting Baud to 5713[ 21:01:17 ] [ Loader ] Reset failed ...[ 21:01:17 ] [ Loader ] Reader type 4 on node /dev/tts/1[ 21:01:17 ] [ Dbox ] Opening device /dev/tts/1[ 21:01:17 ] [ Serial ] Communication mode: 8o2[ 21:01:17 ] [ Serial ] Adjusting to 1 stopbit[ 21:01:17 ] [ Dbox ] Setting Baud to 5713[ 21:01:18 ] [ Loader ] Reset failed ...[ 21:01:18 ] [ Loader ] Reader type 4 on node /dev/tts/1[ 21:01:18 ] [ Dbox ] Opening device /dev/tts/1[ 21:01:18 ] [ Serial ] Communication mode: 8o2[ 21:01:18 ] [ Serial ] Adjusting to 1 stopbit[ 21:01:18 ] [ Dbox ] Setting Baud to 5713[ 21:01:19 ] [ Loader ] Reset failed ...[ 21:01:19 ] [ Loader ] Reader type 4 on node /dev/tts/1[ 21:01:19 ] [ Dbox ] Opening device /dev/tts/1[ 21:01:19 ] [ Serial ] Communication mode: 8o2[ 21:01:19 ] [ Serial ] Adjusting to 1 stopbit[ 21:01:19 ] [ Dbox ] Setting Baud to 5713[ 21:01:20 ] [ Loader ] Reset failed ...[ 21:01:20 ] [ Loader ] Reader type 4 on node /dev/tts/1[ 21:01:20 ] [ Dbox ] Opening device /dev/tts/1[ 21:01:20 ] [ Serial ] Communication mode: 8o2[ 21:01:20 ] [ Serial ] Adjusting to 1 stopbit[ 21:01:20 ] [ Dbox ] Setting Baud to 5713[ 21:01:21 ] [ Loader ] Reset failed ...[ 21:01:21 ] [ Loader ] Reader type 4 on node /dev/tts/1[ 21:01:21 ] [ Dbox ] Opening device /dev/tts/1[ 21:01:21 ] [ Serial ] Communication mode: 8o2[ 21:01:21 ] [ Serial ] Adjusting to 1 stopbit[ 21:01:21 ] [ Dbox ] Setting Baud to 5713[ 21:01:22 ] [ Loader ] Reset failed ...[ 21:01:22 ] [ Loader ] Reader type 4 on node /dev/tts/1[ 21:01:22 ] [ Dbox ] Opening device /dev/tts/1[ 21:01:22 ] [ Serial ] Communication mode: 8o2[ 21:01:22 ] [ Serial ] Adjusting to 1 stopbit[ 21:01:22 ] [ Dbox ] Setting Baud to 5713[ 21:01:23 ] [ Loader ] Reset failed ...[ 21:01:23 ] [ Loader ] Reader type 4 on node /dev/tts/1[ 21:01:23 ] [ Dbox ] Opening device /dev/tts/1[ 21:01:23 ] [ Serial ] Communication mode: 8o2[ 21:01:23 ] [ Serial ] Adjusting to 1 stopbit[ 21:01:23 ] [ Dbox ] Setting Baud to 5713[ 21:01:24 ] [ Loader ] Reset failed ...[ 21:01:24 ] [ Loader ] Reader type 4 on node /dev/tts/1[ 21:01:24 ] [ Dbox ] Opening device /dev/tts/1[ 21:01:24 ] [ Serial ] Communication mode: 8o2[ 21:01:24 ] [ Serial ] Adjusting to 1 stopbit[ 21:01:24 ] [ Dbox ] Setting Baud to 5713[ 21:01:25 ] [ Loader ] Reset failed ...[ 21:01:25 ] [ Loader ] Reader type 4 on node /dev/tts/1[ 21:01:25 ] [ Dbox ] Opening device /dev/tts/1[ 21:01:25 ] [ Serial ] Communication mode: 8o2[ 21:01:25 ] [ Serial ] Adjusting to 1 stopbit[ 21:01:25 ] [ Dbox ] Setting Baud to 5713[ 21:01:26 ] [ Loader ] Reset failed ...[ 21:01:26 ] [ Loader ] Reader type 4 on node /dev/tts/1[ 21:01:26 ] [ Dbox ] Opening device /dev/tts/1[ 21:01:26 ] [ Serial ] Communication mode: 8o2[ 21:01:26 ] [ Serial ] Adjusting to 1 stopbit[ 21:01:26 ] [ Dbox ] Setting Baud to 5713[ 21:01:27 ] [ Loader ] Reset failed ...[ 21:01:27 ] [ Loader ] Reader type 4 on node /dev/tts/1[ 21:01:27 ] [ Dbox ] Opening device /dev/tts/1[ 21:01:27 ] [ Serial ] Communication mode: 8o2[ 21:01:27 ] [ Serial ] Adjusting to 1 stopbit[ 21:01:27 ] [ Dbox ] Setting Baud to 5713[ 21:01:28 ] [ Loader ] Reset failed ...[ 21:01:28 ] [ Loader ] Reader type 4 on node /dev/tts/1[ 21:01:28 ] [ Dbox ] Opening device /dev/tts/1[ 21:01:28 ] [ Serial ] Communication mode: 8o2[ 21:01:28 ] [ Serial ] Adjusting to 1 stopbit[ 21:01:28 ] [ Dbox ] Setting Baud to 5713[ 21:01:29 ] [ Loader ] Reset failed ...[ 21:01:29 ] [ Loader ] Reader type 4 on node /dev/tts/1[ 21:01:29 ] [ Dbox ] Opening device /dev/tts/1[ 21:01:29 ] [ Serial ] Communication mode: 8o2[ 21:01:29 ] [ Serial ] Adjusting to 1 stopbit[ 21:01:29 ] [ Dbox ] Setting Baud to 5713[ 21:01:30 ] [ Loader ] Reset failed ...[ 21:01:30 ] [ Loader ] Reader type 4 on node /dev/tts/1[ 21:01:30 ] [ Dbox ] Opening device /dev/tts/1[ 21:01:30 ] [ Serial ] Communication mode: 8o2[ 21:01:30 ] [ Serial ] Adjusting to 1 stopbit[ 21:01:30 ] [ Dbox ] Setting Baud to 5713[ 21:01:31 ] [ Serial ] Read on fd 9 (len=2 timeout=5300ms)[ 21:01:31 ] Phoenix_read: 00 FF[ 21:01:31 ] [ CardMan ] Atr header is 00 FF [NORMAL][ 21:01:31 ] [ Loader ] Unknown card[ 21:01:31 ] [ Loader ] Trying Irdeto (T=14)[ 21:01:31 ] [ Loader ] Reader type 4 on node /dev/tts/1[ 21:01:31 ] [ Dbox ] Opening device /dev/tts/1[ 21:01:31 ] [ Serial ] Communication mode: 8o2[ 21:01:31 ] [ Serial ] Adjusting to 1 stopbit[ 21:01:31 ] [ Dbox ] Setting Baud to 5713[ 21:01:32 ] [ Loader ] Reset failed ...

en dit is de output op 600 (newcs config):

Code:

[ 21:04:01 ] [ Newcamd ] Newcamd thread Server started on port 15000[ 21:04:01 ] [ Loader ] Reader type 4 on node /dev/tts/1[ 21:04:01 ] [ Dbox ] Opening device /dev/tts/1[ 21:04:01 ] [ Serial ] Communication mode: 8o2[ 21:04:01 ] [ Serial ] Adjusting to 1 stopbit[ 21:04:01 ] [ Dbox ] Setting Baud to 16129[ 21:04:02 ] [ Loader ] Reset failed ...[ 21:04:02 ] [ Loader ] Reader type 4 on node /dev/tts/1[ 21:04:02 ] [ Dbox ] Opening device /dev/tts/1[ 21:04:02 ] [ Serial ] Communication mode: 8o2[ 21:04:02 ] [ Serial ] Adjusting to 1 stopbit[ 21:04:02 ] [ Dbox ] Setting Baud to 16129[ 21:04:03 ] [ Loader ] Reset failed ...[ 21:04:03 ] [ Loader ] Reader type 4 on node /dev/tts/1[ 21:04:03 ] [ Dbox ] Opening device /dev/tts/1[ 21:04:03 ] [ Serial ] Communication mode: 8o2[ 21:04:03 ] [ Serial ] Adjusting to 1 stopbit[ 21:04:03 ] [ Dbox ] Setting Baud to 16129[ 21:04:04 ] [ Loader ] Reset failed ...[ 21:04:04 ] [ Loader ] Reader type 4 on node /dev/tts/1[ 21:04:04 ] [ Dbox ] Opening device /dev/tts/1[ 21:04:04 ] [ Serial ] Communication mode: 8o2[ 21:04:04 ] [ Serial ] Adjusting to 1 stopbit[ 21:04:04 ] [ Dbox ] Setting Baud to 16129[ 21:04:05 ] [ Loader ] Reset failed ...[ 21:04:05 ] [ Loader ] Reader type 4 on node /dev/tts/1[ 21:04:05 ] [ Dbox ] Opening device /dev/tts/1[ 21:04:05 ] [ Serial ] Communication mode: 8o2[ 21:04:05 ] [ Serial ] Adjusting to 1 stopbit[ 21:04:05 ] [ Dbox ] Setting Baud to 16129[ 21:04:06 ] [ Loader ] Reset failed ...[ 21:04:06 ] [ Loader ] Reader type 4 on node /dev/tts/1[ 21:04:06 ] [ Dbox ] Opening device /dev/tts/1[ 21:04:06 ] [ Serial ] Communication mode: 8o2[ 21:04:06 ] [ Serial ] Adjusting to 1 stopbit[ 21:04:06 ] [ Dbox ] Setting Baud to 16129[ 21:04:07 ] [ Loader ] Reset failed ...[ 21:04:07 ] [ Loader ] Reader type 4 on node /dev/tts/1[ 21:04:07 ] [ Dbox ] Opening device /dev/tts/1[ 21:04:07 ] [ Serial ] Communication mode: 8o2[ 21:04:07 ] [ Serial ] Adjusting to 1 stopbit[ 21:04:07 ] [ Dbox ] Setting Baud to 16129[ 21:04:08 ] [ Serial ] Read on fd 9 (len=2 timeout=5300ms)[ 21:04:08 ] Phoenix_read: 00 FF[ 21:04:08 ] [ CardMan ] Atr header is 00 FF [NORMAL][ 21:04:08 ] [ Loader ] Unknown card[ 21:04:08 ] [ Loader ] Trying Irdeto (T=14)[ 21:04:08 ] [ Loader ] Reader type 4 on node /dev/tts/1[ 21:04:08 ] [ Dbox ] Opening device /dev/tts/1[ 21:04:08 ] [ Serial ] Communication mode: 8o2[ 21:04:08 ] [ Serial ] Adjusting to 1 stopbit[ 21:04:08 ] [ Dbox ] Setting Baud to 9600[ 21:04:09 ] [ Loader ] Reset failed ...[ 21:04:09 ] [ Loader ] Starting Newcamd Server on port 15000[ 21:04:09 ] [ Newcamd ] Newcamd thread Server started on port 15000[ 21:04:09 ] bind: error! 98: Address already in use[ 21:04:09 ] [ Newcamd ] Stopping port 15000resetReset reader 0: /dev/tts/1-> [ 21:04:21 ] [ Loader ] Reader type 4 on node /dev/tts/1[ 21:04:21 ] [ Dbox ] Opening device /dev/tts/1[ 21:04:21 ] [ Serial ] Communication mode: 8o2[ 21:04:21 ] [ Serial ] Adjusting to 1 stopbit[ 21:04:21 ] [ Dbox ] Setting Baud to 9600[ 21:04:21 ] [ Loader ] Reset failed ...[ 21:04:21 ] [ Loader ] Reader type 4 on node /dev/tts/1[ 21:04:21 ] [ Dbox ] Opening device /dev/tts/1[ 21:04:21 ] [ Serial ] Communication mode: 8o2[ 21:04:21 ] [ Serial ] Adjusting to 1 stopbit[ 21:04:21 ] [ Dbox ] Setting Baud to 9600[ 21:04:22 ] [ Loader ] Reset failed ...[ 21:04:22 ] [ Loader ] Reader type 4 on node /dev/tts/1[ 21:04:22 ] [ Dbox ] Opening device /dev/tts/1[ 21:04:22 ] [ Serial ] Communication mode: 8o2[ 21:04:22 ] [ Serial ] Adjusting to 1 stopbit[ 21:04:22 ] [ Dbox ] Setting Baud to 9600[ 21:04:23 ] [ Loader ] Reset failed ...[ 21:04:23 ] [ Loader ] Reader type 4 on node /dev/tts/1[ 21:04:23 ] [ Dbox ] Opening device /dev/tts/1[ 21:04:23 ] [ Serial ] Communication mode: 8o2[ 21:04:23 ] [ Serial ] Adjusting to 1 stopbit[ 21:04:23 ] [ Dbox ] Setting Baud to 9600[ 21:04:24 ] [ Loader ] Reset failed ...[ 21:04:24 ] [ Loader ] Reader type 4 on node /dev/tts/1[ 21:04:24 ] [ Dbox ] Opening device /dev/tts/1[ 21:04:24 ] [ Serial ] Communication mode: 8o2[ 21:04:24 ] [ Serial ] Adjusting to 1 stopbit[ 21:04:24 ] [ Dbox ] Setting Baud to 9600[ 21:04:25 ] [ Loader ] Reset failed ...[ 21:04:25 ] [ Loader ] Reader type 4 on node /dev/tts/1[ 21:04:25 ] [ Dbox ] Opening device /dev/tts/1[ 21:04:25 ] [ Serial ] Communication mode: 8o2[ 21:04:25 ] [ Serial ] Adjusting to 1 stopbit[ 21:04:25 ] [ Dbox ] Setting Baud to 9600[ 21:04:26 ] [ Loader ] Reset failed ...[ 21:04:26 ] [ Loader ] Reader type 4 on node /dev/tts/1[ 21:04:26 ] [ Dbox ] Opening device /dev/tts/1[ 21:04:26 ] [ Serial ] Communication mode: 8o2[ 21:04:26 ] [ Serial ] Adjusting to 1 stopbit[ 21:04:26 ] [ Dbox ] Setting Baud to 9600[ 21:04:27 ] [ Loader ] Reset failed ...[ 21:04:27 ] [ Loader ] Reader type 4 on node /dev/tts/1[ 21:04:27 ] [ Dbox ] Opening device /dev/tts/1[ 21:04:27 ] [ Serial ] Communication mode: 8o2[ 21:04:27 ] [ Serial ] Adjusting to 1 stopbit[ 21:04:27 ] [ Dbox ] Setting Baud to 9600[ 21:04:28 ] [ Serial ] Read on fd 9 (len=3 timeout=5300ms)[ 21:04:28 ] Phoenix_read: 00 FF FF[ 21:04:28 ] [ CardMan ] Atr header is 00 FF [NORMAL][ 21:04:28 ] [ Loader ] Unknown card[ 21:04:28 ] [ Loader ] Trying Irdeto (T=14)[ 21:04:28 ] [ Loader ] Reader type 4 on node /dev/tts/1[ 21:04:28 ] [ Dbox ] Opening device /dev/tts/1[ 21:04:28 ] [ Serial ] Communication mode: 8o2[ 21:04:28 ] [ Serial ] Adjusting to 1 stopbit[ 21:04:28 ] [ Dbox ] Setting Baud to 9600[ 21:04:29 ] [ Loader ] Reset failed ...resetReset reader 0: /dev/tts/1-> [ 21:04:39 ] [ Loader ] Reader type 4 on node /dev/tts/1[ 21:04:39 ] [ Dbox ] Opening device /dev/tts/1[ 21:04:39 ] [ Serial ] Communication mode: 8o2[ 21:04:39 ] [ Serial ] Adjusting to 1 stopbit[ 21:04:39 ] [ Dbox ] Setting Baud to 9600[ 21:04:39 ] [ Loader ] Reset failed ...[ 21:04:39 ] [ Loader ] Reader type 4 on node /dev/tts/1[ 21:04:39 ] [ Dbox ] Opening device /dev/tts/1[ 21:04:39 ] [ Serial ] Communication mode: 8o2[ 21:04:39 ] [ Serial ] Adjusting to 1 stopbit[ 21:04:39 ] [ Dbox ] Setting Baud to 9600[ 21:04:40 ] [ Loader ] Reset failed ...[ 21:04:40 ] [ Loader ] Reader type 4 on node /dev/tts/1[ 21:04:40 ] [ Dbox ] Opening device /dev/tts/1[ 21:04:40 ] [ Serial ] Communication mode: 8o2[ 21:04:40 ] [ Serial ] Adjusting to 1 stopbit[ 21:04:40 ] [ Dbox ] Setting Baud to 9600[ 21:04:41 ] [ Loader ] Reset failed ...[ 21:04:41 ] [ Loader ] Reader type 4 on node /dev/tts/1[ 21:04:41 ] [ Dbox ] Opening device /dev/tts/1[ 21:04:41 ] [ Serial ] Communication mode: 8o2[ 21:04:41 ] [ Serial ] Adjusting to 1 stopbit[ 21:04:41 ] [ Dbox ] Setting Baud to 9600[ 21:04:42 ] [ Loader ] Reset failed ...[ 21:04:42 ] [ Loader ] Reader type 4 on node /dev/tts/1[ 21:04:42 ] [ Dbox ] Opening device /dev/tts/1[ 21:04:42 ] [ Serial ] Communication mode: 8o2[ 21:04:42 ] [ Serial ] Adjusting to 1 stopbit[ 21:04:42 ] [ Dbox ] Setting Baud to 9600[ 21:04:43 ] [ Loader ] Reset failed ...[ 21:04:43 ] [ Loader ] Reader type 4 on node /dev/tts/1[ 21:04:43 ] [ Dbox ] Opening device /dev/tts/1[ 21:04:43 ] [ Serial ] Communication mode: 8o2[ 21:04:43 ] [ Serial ] Adjusting to 1 stopbit[ 21:04:43 ] [ Dbox ] Setting Baud to 9600[ 21:04:44 ] [ Serial ] Read on fd 9 (len=4 timeout=5300ms)[ 21:04:44 ] Phoenix_read: 00 FF FF FF[ 21:04:44 ] [ CardMan ] Atr header is 00 FF [NORMAL][ 21:04:44 ] [ Loader ] Unknown card[ 21:04:44 ] [ Loader ] Trying Irdeto (T=14)[ 21:04:44 ] [ Loader ] Reader type 4 on node /dev/tts/1[ 21:04:44 ] [ Dbox ] Opening device /dev/tts/1[ 21:04:44 ] [ Serial ] Communication mode: 8o2[ 21:04:44 ] [ Serial ] Adjusting to 1 stopbit[ 21:04:44 ] [ Dbox ] Setting Baud to 9600[ 21:04:45 ] [ Loader ] Reset failed ...

krijg op beide settings weinig nuttigs

 

ik trek dus de conclusie dat of de kaart zelf kapot is (kan wel gewoon uitgelezen worden met samsung decoder dus lijkt me onwaarschijnlijk) of de card-reader of de multicam kapot is..

 

is er eventueel iemand die meer ervaring heeft met een dbox2 die in de omgeving van utrecht woont die mij hiermee kan helpen?

[Holtkamp]

En nog een laatste suggestie, heb je in sportster zelf newcs geactiveerd?

 

Dbox knop -> blauwe knop -> rode knop -> server

 

Ik meen dat het al eerder voorbij gekomen is, maar anders activeert sportser je multicam niet.

[nextkiller]

ja staat al geactiveerd

[nextkiller]

ik heb vandaag een andere multicam en nieuwe cardreader besteld,

 

ik hoop ze begin volgende week dan binnen te hebben en verder te kunnen testen...

[cellie]

Misschien kan NewCS 1.65 het verhelpen, zitten wat fixes voor Irdeto in. Link is te vinden in Dreambox sectie.

[nextkiller]

ik zal het van de week wel proberen,

 

eerst maar eens die nieuwe onderdelen binnenkrijgen

[nextkiller]

ik heb vandaag nieuwe multicam en cardreader binnen gehad,

 

aangesloten en geboot, werkte in een keer

 

na onderzoek van de oude multicam blijkt dat ergens een condensator ofzo "opgeblazen" is

 

bedankt voor alle hulp

[Holtkamp]

Goed om te horen dat het eindelijk werkt

 

Misschien een leuke tip: DBoxWinServer (google maar even), dit installeer je op een server / PC in je netwerk, dan kan je de DBox gebruiken als recorder. De bestanden worden in MPEG op de server geplaatst, waarna je ze weer met de DBox, of in mijn geval PlayStation 3, weer kunt afspelen.

[nextkiller]

bedankt voor de tip

 

gebruikte hiervoor altijd ngrab (in het illegaal gratis kijken tijdperk)