Uitleg voor nieuwe flash

[Gast]

To modify the flash or flash hardware of a cam you may need some special equipment:

 

Programmer for the W29C040T-90 (This is a Winbond part Number - Full technical specifications HERE)

A 32 pin SOIC Test Clip

Flash Cam File (this file here is for an Aston cam to Freecam)

Maybe a small tipped soldering iorn (if you remove the IC).

Maybe an adapter for the programmer (if you remove the IC).

Here is a editor for the Free Cam files.

In order to read some of the files below you will need to have installed

This modification to a Viaccess Red Cam does not work on the Echostar 3000 ADP

It works for all Manhattan and Echostar 3600 and Echostar 2200

 

Now we will look at modifiying an Irdeto / Viaccess cam.

Both these cams have a 32 pin Flash memory chip called AT29C040 (This is a Atmel Code) and this is a 4 Megabit (512 X 8), 5 volt Flash memory (4Mb (512K × 8) CMOS PEROM, 5V only - 120ns Access)

See picture to the right showing position of the 29C040 IC.

Click HERE for the ATMEL Adobe PDF file - The IC is a 32T

(32 Lead - Plastic Thin Small Outline Package . (TSOP))

Irdeto Cam Circuit Diagram 1 & 2 - Viaccess Cam Circuit Diagram 1

 

 

To program this flash memory you need a Atmel programmer.

 

Now if you are going to program a AT29C040 Flash memory you need the IC, the flash file and an adaptor for the programmer.

 

 

The IC can be purchased from www.farnell.com and the details are: IC-4MB CMOS PEROM

 

Order Code 786743

Description Time access 120 ns Voltage programming 5 V Base number 29C040 Case style DIL Memory configuration 512Kx8 Memory type CMOS PEROM Pins number of 32 Memory size 4 M-bit 4Mb (512K8) CMOS PEROM, 5V only - 120ns Access

Manufacturer Atmel

Manufacturer Part Code AT29C040A-12PC

Pack Quantity 1

Catalogue Page Number 2:1177

Price 32.00 UK Pounds (64 Tunisian Dinars)

If you are located outside the UK click HERE to obtain details of your nearest Farnell distribution outlet.

 

The flash file will need to be read from an existing cam thats been programmed to work as a FREECAM.

 

 

If you want to use an adaptor you need to order a 32 TSOP to 32 DIP Clam shell pin to pin converter, this is about $90 US dollers from HERE.

The pdf data sheet for this adapter is HERE. The adaptor can be purchased from: Newark Electronics and the price is $264.34. I also found the manufacture of this adapter at ICE Tech in Sheffield, England.There are many prices for this adapter, so shop around before you buy.

 

This adapter will work with the following IC's:

AMD (PREFIX AM): 27C010, 27C020, 27C040, 27H010, 27LV010, 2LV010B, 27LV020, 27LV020B, 28F010, 28F010A, 28F020, 28F256, 28F256A, 28F512, 28F512A, 29F002BB, 29F002BT, 29F002NBB, 29F002NBT, 29F004, 29F004BB, 29F004BT, 29F010, 29F010A, 29F010B, 29F040, 29F040B, 29F040T, 29LV001, 29LV001BB, 29LV001BT, 29LV010A, 29LV010B, 29LV040B

ATMEL (PREFIX AT): 27BV010, 27BV020, 27BV040, 27C010, 27C010L, 27C020, 27C040, 27C080, 27LV010, 27LV010A, 27LV010L, 27LV020, 27LV020A, 27LV040, 27LV040A, 27LV080, 28C010, 29BV010, 29BV010, 29BV010A, 29BV040A, 29C257, 29C512, 29C010, 29C020, 29C040, 29LV010A, 29LV020, 29LV040, 29LV040A, 29LV512, 49BV001, 49BV001T, 49BV002T, 49BV001, 49BV010, 49BV020, 49BV040, 49BV040T, 49F001, 49F001N, 49F001NT, 49F001T, 49F002, 49F010, 49F020, 49F040, 49F512, 49HBV010, 49HF010, 49LV010, 49LV001, 49LV001T, 49LV002, 49LV002N, 49LV002T, 49LV010, 49LV020, 49LV040, 49LV040T

CSI(Catalyst): (PREFIX CAT) 28F010, 28F020, 28F256, 28F512

FAIRCHILD (PREFIX NM OR FM): 27C010, 27C020, 27C040

FUJITSU (PREFIX MBM): 27C010,1001

HITACHI (PREFIX HN): 27C101G, 27C301G

HYNIX (PREFIX HY): 29F002TT, 29F040AT-90

HYUNDAI (PREFIX HY): 29F002TT, 29F040AT

INTEL (PREFIX E FOR TSOP): 27C010, 27C020, 27C040, 28F010, 28F001BX-B, 28F001BX-T, 28F010, 28F020, 28F256, 28F512

ISSI (PREFIX IS): 27C010, 28F010

MACRONIX (PREFIX MX): 27C100, 27C1001, 27L100, 29F001B, 29F001B, 29F001T, 29F002, 29F004B, 29F004T, 29F040

MOSEL-VITALEC (PREFIX V): 29C51000T, 29C51001T, 29C51002T, 29C51004T, 29LC51000, 29LC51001

NATIONAL (PREFIX NM): 27C010, 27C020, 27C040

NEXFLASH (PREFIX NX): 29F010A

SST: 27SF010, 27SF020, 27VF040, 28SLF040A, 28SF040, 29EE010, 29EE020, 37VF010, 37VF020, 37VF040, 37VF512, 39SF010, 39SF020, 39SF040, 39SF512, 39VF010, 39VF020, 39VF040, 39VF512, 49LF002, 49LF002A, 49LF004, 49LF004A, 49LF020, 49LF040, 49LF080

ST MICROELECTRONICS FORMERLY SGS-THOMSON (PREFIX ST or M): 27C1000, 27C1001, 27C2000, 27C2001, 274001, 27C801, 27V101, 27V201, 27V401, 28F101, 28F201, 28F256, 28F256A, 28F512, 28F512A, 29F002BB, 29F010B, 29F040

TEXAS INSTRUMENTS (PREFIX TMM): 27C010, 27C010A, 27C020, 27C040, 28F010A, 28F020A, 28F256A, 28F512A

TOSHIBA (PREFIX TC): 57C1000, 57C1001

WINBOND (PREFIX W OR BM): 27C010, 27C020, 27E010, 27E020, 27E040, 27E512, 27L010, 27L020, 27L040, 29EE512, 29EE010, 29EE011, 29C020, 29C040, 49F020, 49V002, 49V002F

XICOR (PREFIX X): 28C010, 28C040, 28C513

 

 

 

 

 

 

You could re program the Flash memory without removing the memory or without buying the expensive 32 TSOP to 32 DIP adapter.

You will require a 32 pin SOIC test clip - Click HERE for the Adobe PDF file. See below for further details.

Farnell Order Code 517940

Description Material contact Gold plated beryllium copper Plating contact Gold Case style PLCC Ways number of 32

Manufacturer HIRSCHMANN

Manufacturer Part Code 933087001

Pack Quantity 1

Catalogue Page Number 2:470

Price 20.25 UK Pounds (40.50 Tunisian Dinars)

 

 

Now to use this 32 pin SOIC with the above programmer you need to solder some wires from the test clip to a 32 pin socket (see below) that can be inserted in the above MICRO PRO programmer. So below is the pin numbers of the TSOP IC thats fitted in the Cam and to the right are the pin numbers of a standard DIP package that will work with the above programmer. So you solder from the 32 pin dil socket to the above test clip 32 wires. then you can insert the dil socket into the programmer and program the 29C040 TSOP on board.

The below item can be purchased from Farnell Components, Part number:355-0771 Price: 0.51 pence (1 TDN), data sheet can be downloaded HERE.

 

voor grafische details -> http://www.maxking.com/smartcardcamapation.htm

 

Als de link alsnog verwijdert wordt...vraag hem maar op via PM

 

[Gast]

Bovenstaand is alleen van toepassing voor een gewone CI,

De magic en aanverwante ci's zijn voorzien van een 2MB flash welke in een tsop48 behuizing zit !