-
Items
421 -
Registratiedatum
-
Laatst bezocht
Inhoudstype
Profielen
Forums
Store
Berichten die geplaatst zijn door razors
-
-
IMESH heeft nogal veel spyware aan boord kan het proberen
en weer meteen deinstaleren die handel met alle spyware bestanden
kijk maar eens met "adware"
razors
-
kan wel maar helaas vragen ze dan om je creditkaart bij roxio
dus als ik hem kan downloaden bij jou graag
hoe doe ik dat?
thnx razors
-
Heb servicepak 1_nl geinstaleerd
nou lijkt het mij dat mijn system trager is geworden door deze update
vooral outlook 2002
ook krijg ik nu foutmeldingen "windows sluit programma af"
windowsXP pro
athlon 1400mhz
384 ram
40 gig disk
MSI ms-6380 moederbord
heeft iemand misschien het zelfde <img src="/ubbthreads/images/icons/confused.gif" alt="" />
razors
-
Weet iemand waar ik de nederlandse versie van easy cd creator 5 platinum
kan downloaden
Als die er is tenminste <img src="/ubbthreads/images/icons/confused.gif" alt="" />
razors
-
hier ook gen probleem
werk met XP pro zeer tevreden
razors
-
ringo
is dit ook service pack 1 ook voor de nederlandse versie????
razors
-
in opstart menu gewoon kiezen voor 2000 eenmaal in win 2ooo ga naar mijn computer
vraag daar de eigenschappen van op je moet de tab geavenceerd hebben daar kun je instellen welk systeem moet opstarten en hoeveel seconden dit opstartscherm moet weergeven
zet dit op 2 seconden en je start meteen de gekozen systeem op
als je toch nog in 98 wil zijn dan kan dat door bij het opstarten naar de piep
op de pijltjes toets drukt dan verschijnt alsnog het keuze scherm
suc6
razors
-
Oke bedankt tis me duidelijk
razors
-
JHK_NL
MD 9.0 wat is dat ?????
razors
-
heb je voor jou moederbord (chipset) de nieuwste "IDE" drivers geinstaleerd?
razors
-
ga via start-alle programma's-bureau accessoris-systeemwerkset-systeem info
op plusje klikken bij hardwarebronnen en dan klikken op IRQ's
kijken of daar bij status "OK" staat
kijk ook nog even naar naar de andere opties in dat rijtje van "hardwarebronnen"
ik denk dat daar wel een of andere IRQ, apparaat of geheugentoegang een conflict geeft
razors
-
er zijn veel oorzaken die deze foutmelding generen
ik zelf heb adsl usb en xp pro en dit probleem heb ik niet
dus zou je ergens anders moeten zoeken waar de foutmelding vandaan komt
heb je xp geupgrade vanaf win98?
het kan zijn dat er drivers geladen worden die niet compatebel zijn met xp
ik bedoel drivers die zijn blijven zitten naar het upgraden
of was het een schone instalatie van xp
is de bios de nieuwste versie?
razors
-
toppie44
welke driver gebruik je voor de adsl modem
welk type modem heb je USB of serieel, etc
heb je windows update al gedraaid voor XP <img src="/ubbthreads/images/icons/confused.gif" alt="" /> klik hier
razors
-
Antonieq
lees dit eens door misschien dat dit ook voor jou type schrijver geldt
ik had begrepen dat je veel cd achter elkaar brand, dan zou de drive te warm kunnen worden met onder staande gevolgen
Lately you can hear a lot of complaints about certain CD-Writers going bad after some time. The Philips CDD3610 is one of these CD-Writers which is getting "old" and as a lot of CD-Writer vendors are using the same drive, a lot of them are also bound to fail.
The same happened about a year ago with the Philips CDD2000/CDD2600 & HP4020/6020 CD-Writers which also had aging problems related to a faulty spring. More info here.
Usually the problems will occur after the warranty is over and then getting the CD-Writer repaired will be a big problem.
Problems with the drive not reading the CD, buffer underrun errors and other errors are generally associated with the laser head not tracking the sectors on the CD properly. This can happen from the laser itself no longer being properly calibrated or aligned. When this happens, the laser floats over the CD in search of the initialization information that all CD's have written into the first sectors to let the drive know that there is a CD in it. A laser that is out of calibration or out of tracking will look for these sectors but can't find them. Usually this causes the LED's on the front of the drive to keep on flashing indicating that an error occurred.
The main cause for all these problems is the intense heat which is produced by the laser & motor inside the CD-Writer. Usually the laser head assembly or parts of it are made of plastic which deforms over time by the generated heat. Just a tiny distortion of this plastic is enough to cause these failures.
index
Cleaning a CD-Writer
About 75% of the CD-Writer related burning problems are not caused by electronically but purely by mechanical & optical problems.
The CD-Writer laser unit is mounted onto a guiding frame on which it can move back and forth (driven by a small motor). In time the lubrication on this frame tends to disappear or it becomes unevenly spread to one side.
When needed, remove existing dirt & hairs from the guiding rails. Now apply some silicone grease (heat resistant, non stick, for both metal and plastics) to the guiding rails.
Make sure the grease gets applied evenly along the guiding rails by physically moving the laser head back and forth. If the motor doesn't allow you to move the head assemble the drive and use, for example, an audio CD and repeatedly do a intro-play of the first and last track. This way the laser head is moved over the full length of the guiding rails. Afterwards check if there is enough grease on the rails.
Also check if the laser lens is clear, if it is not clean it with some CD cleaning fluid or distilled water.
Never EVER use alcohol to clean a lens as this will leave a thin film on the lens and it may react with some plastic lenses!
In most cases this will solve the CD-Writer related burn problems like buffer underrun errors & calibrating errors.
NOTE: Technical experience is needed to disassemble and clean a CD-Writer or CD-ROM. Usually the whole drive needs to be taken apart to get to the laser head & guiding rails! So be very careful disassembling the drive as this will void any warranty.
razors
-
Even kijken of de map die de tijdelijke bestanden opslaat leeg is of je verwijst naar een map die je zelf hebt aangemaakt om tijdens het branden te gebruiken voor opslag
dit wil ook wel eens helpen
razors
-
Kijk hier eens voor een firmware upgrade van Ph@l@ps
dit zou wel eens de oplossing kunnen zijn
h t t p ://w w w .p c s t u f f .p h i l i p s .c o m/
ff de spatie verwijderen en in de adres regel plakken s6
razors
-
hierbij de mijne
razors
-
PSX of kabel is niet kapot
lees dit maar eens dit geld niet voor alle gecopieérde spellen
Misschien heb je er wat aan??
How can you play copied CDs on your PSX?
Install a MOD-chip into your PSX
You have to solder a small chip with 4 or 5 wires attached to it in to your machine. For this you will have to open it and remove various parts before you can acces the place where u can solder the chip! So only use this method if you know something about electronics / soldering!!!
Plug a game-enhancer into your PSX
This piece does the same trick buy you don't have to open your machine; just plug it in to the I/O port on the back of the PSX (like a Action Replay or Game Shark).
Razors
cd creator 5 platinum
in Windows en zo...
Geplaatst:
Primeevil
hoe kan ik dit bij jou downloaden?
razors