randkalf
-
Items
87 -
Registratiedatum
-
Laatst bezocht
Inhoudstype
Profielen
Forums
Store
Berichten die geplaatst zijn door randkalf
-
-
Ik word uit je log ook niet echt wijs..
Ik zelf werk met een SoftCam.Key die ik van een upload site heb gehaald.
Ik heb er alleen een heleboel keys uitgegooid.
Hier mijn log:
linvdr:~# /usr/bin/vdr -L /usr/lib/vdr/plugins -Psc -v /video0 -c /etc/vdr -w 900 -E /ramdisk/epg.data -s /usr/bin/poweroff.pl -l 3
plainkeys: registering key type V (super)
loaders: registering loader Viaccess
systems: registering CA system Viaccess, pri -10
plainkeys: registering key type Z (super)
plainkeys: registering key type S (super)
loaders: registering loader Seca
seca2prov: registering Seca2 provider 0080 0081
seca2prov: registering Seca2 provider 006a
seca2prov: registering Seca2 provider 0065
systems: registering CA system Seca, pri -10
plainkeys: registering key type N (super)
systems: registering CA system Nagra, pri -10
plainkeys: registering key type I
plainkeys: registering key type X (super)
plainkeys: registering key type C (super)
cardclients: registering cardclient Newcamd
cardclients: registering cardclient Aroureos
cardclients: registering cardclient Radegast
cardclients: registering cardclient Camd33
cardclients: registering cardclient Cardd
cardclients: registering cardclient Buffy
cardclients: registering cardclient Camd35
systems: registering CA system Cardclient, pri -15
loaders: registering loader ECM
loaders: registering loader KEY
scplugin: version 0.5.4 starting
INFO: loading keys from /etc/vdr/plugins/SoftCam.Key
plainkeyvia: bad key format 'V 012810 OF 8XXXXXXXXXXXXXXXXXXXXXXX ;TBL 88°E key update: 16/08/2004'
nagrakey: bad key format 'N 4101 X1 03 ;'
nagrakey: bad key format 'N 4901 X1 03 ;'
nagrakey: bad key format 'N 0101 X1 03;'
nagrakey: bad key format 'N 0901 XL 03;'
ERROR: Unknown key type 'B'
ERROR: file '/etc/vdr/plugins/SoftCam.Key' has error in line 'B 1FFf 11892:12800:H xXXXXXXXXXXXXXXXXXXXXX ;NBA TV'
ERROR: Unknown key type 'B'
ERROR: file '/etc/vdr/plugins/SoftCam.Key' has error in line 'B 1FFF 10722:27500:H XXXXXXXXXXXXX ;MEGASPORT'
ERROR: Unknown key type 'B'
ERROR: file '/etc/vdr/plugins/SoftCam.Key' has error in line 'B 1FFF 11830:06666:V XXXXXXXXXXXXXXXXXXXX ;TV8'
ERROR: Unknown key type 'B'
ERROR: file '/etc/vdr/plugins/SoftCam.Key' has error in line 'B 1FFF 12437:27500:H XXXXXXXXXXXXXXXXXXX ;IRIB FEED'
ERROR: Unknown key type 'B'
ERROR: file '/etc/vdr/plugins/SoftCam.Key' has error in line 'B 1FFF 11158:03254:V XXXXXXXXXXXXXXXXX ;MINSK TV'
ERROR: Unknown key type 'B'
ERROR: file '/etc/vdr/plugins/SoftCam.Key' has error in line 'B 1FFF 03645:28000:H XXXXXXXXXXXXXXXX ;SPORT'
ERROR: Unknown key type 'B'
ERROR: file '/etc/vdr/plugins/SoftCam.Key' has error in line 'B 1FFF 11139:01628:H XXXXXXXXXXXXXXXXXXXX ;ISRAEL'
ERROR: Unknown key type 'B'
ERROR: file '/etc/vdr/plugins/SoftCam.Key' has error in line 'B 1FFF 10762:23250:H XXXXXXXXXXXXXXXXXXXXXXXXX ;M1'
confread: keys: fgets readbuffer overflow
plainkeys: loaded 188 keys from /etc/vdr/plugins/SoftCam.Key
INFO: loading cardclient config from /etc/vdr/plugins/cardclient.conf
ERROR: Failed to open file '/etc/vdr/plugins/Seca.KID': No such file or directory
cardinfo: loaded 0 Seca cards from /etc/vdr/plugins/Seca.KID
ERROR: Failed to open file '/etc/vdr/plugins/Viaccess.KID': No such file or directory
cardinfo: loaded 0 Viaccess cards from /etc/vdr/plugins/Viaccess.KID
INFO: loading ca cache from /etc/vdr/plugins/ca.cache
softcam: ScCaps are 1 0 0 0 0 0 0 0 0 0
cam 0: got ca device from ciHandler
cam 0: check ProvidesCa: 0100 1801 -> n=2
ecmhandler 0.0: setting new SID 30352
ecmhandler 0.0: is no longer idle
ecmhandler 0.0: triggered SID 0/30352 idx -1/0 mode -1/0 -
ecmcache: from cache: system Nagra (1801) id 0000 with ecm 716/80
ecmhandler 0.0: try system Nagra (1801) id 0000 with ecm 716 (cached) (pri=-10)
ecmhandler 0.0: started logger sys=0x1801 id=0x0 (Nagra)
system: using key N 4101 00 2AD1...
ecmhandler 0.0: correct key found
ecmhandler 0.0: started logger sys=0x1801 id=0x0 (Nagra)
cam 0: check ProvidesCa: 0100 1801 -> n=2
ecmhandler 0.0: is idle now
ecmhandler 0.0: is no longer idle
ecmhandler 0.0: triggered SID 30352/30352 idx 0/0 mode 3/0 sync/code]
-
Ik krijg ook foutmeldingen met mijn SoftCam.Key
Maar toch heb ik beeld op de Taquilla's
Je kunt de foute keys er gewoon uithalen hoor!
Post eens de output van vdr-sc
-
Newcs is toch gewoon het newcamd protocol?
Het werkt in ieder geval met newcamd CDS, dat heb ik getest.
Irdeto, Seca, Viaccess, Nagra, Conax & Cryptoworks werkt volgens de README.
Als je linVDR 0.7 gaat gebruiken, heb ik de sc plugin wel voorgecompileerd voor je inclusief een gepatchte VDR.
Hier is de README van versie 1.5.3 (ik gebruik 0.4)
Citaat:This is a "plugin" for the Video Disk Recorder (VDR).See the file COPYING for license information.
Description: SoftCAM for Irdeto, Seca, Viaccess, Nagra, Conax & Cryptoworks
-----------------------------------------------------------------------
What is it ?
------------
First: Most certainly it's not legal to use this software in most countries of
the world. But probably you already know this...
SC means softcam, which means a software CAM emulation.
This piece of software is originaly based on (and still contains code from)
mgcam (a standalone CAM emulation). Many thanks to the (anonymous) author for
his really fine piece of software :-)
The plugin only decrypts the scrambling codewords from the incomming ECM
stream. The actual descrambling of the video stream is done by a special chip
on the DVB card. This chip is available with "premium" technotrend chipset
cards like FujitsuSiemens or Hauppauge only. Budget cards like the WinTV Nova
lack the chip. In this case you have to use software decrypt (SoftCSA) which
requires a decent CPU.
Requirements
------------
* DVB driver from dvb-kernel 2.6 or 2.4 branch with applied patches
* a patched firmware version 261f or newer
* VDR 1.3.29 or newer with applied vdr-sc patch
* SoftCSA 0.1.0 or newer for software decryption
How to setup ?
--------------
First you should start with a recent dvb-kernel driver (cvs recomended). Copy
the patched firmware in place and apply at least the dvb-cwidx patch. Make sure
that you use the latest patched firmware. Failing to do so, will break
concurrent feature! Recompile the driver, unload the modules, install the new
ones and reload the DVB driver. If you suffer from ARM crashes, add
"hw_sections=0" while loading the dvb-ttpci module.
Second you should apply the vdr-sc patch to your VDR sources. Select the
appropriate patch for your VDR version. Recomplie VDR and use the new binary.
Now follow the VDR instruction to compile plugins (make plugins). The plugin
has several options which can be enabled at compile time:
IRDETO=1 to enable Irdeto/Betacrypt support.
SECA=1 to enable Seca support (needs OpenSSL).
VIACCESS=1 to enable Viaccess support.
NAGRA=1 to enable Nagra support (needs OpenSSL)
CONAX=1 to enable Conax support (needs OpenSSL)
SHL=1 to enable @SHL (SkyCrypt) support (needs OpenSSL)
CONSTCW=1 to enable constant CW support
SC_SECA=1 to enable Seca smartcard support (needs Phoenix ISO
interface)
SC_CRYPTOWORKS=1 to enable Cryptoworks smartcard support (needs Phoenix ISO
interface)
SC_IRDETO=1 to enable Irdeto smartcard support (needs Phoenix ISO
interface and OpenSSL)
SC_CONAX=1 to enable Conax smartcard support (needs Phoenix ISO
interface)
SC_VIACCESS=1 to enable Viaccess smartcard support (needs Phoenix ISO
interface)
CARDCLIENT=1 to enable cardserver clients (needs OpenSSL) (see below)
DBG=1 to compile with debugging information
For permanent activation add the options to the Make.config file in the VDR base
directory. If OpenSSL is needed, you have to install the openssl-devel package
for most distributions too.
All config files must be located in a subdirectory (of your VDR config
directory) called "plugins". The private plugin cache file is saved to this
directory too. The keyfile must be named "SoftCam.Key".
For Seca2 support you need binary files which contain the hash & mask tables.
The file format is the same as for Yankse. The files must be located in the
"plugins/seca" subdirectory. The name sheme is s2_TTTT_XXXX.bin where TTTT is
one of "hash","mt" and XXXX is the provider ID (e.g. s2_hash_0064.bin,
s2_mt_0070.bin). The hash file must be 1536 bytes long. The mt file is normaly
16384 bytes long, but this may differ for your actual provider. For advanced
Seca2 providers you may need additional table files. At the moment this are
s2_sse.bin, s2_sse_XXXX.bin and s2_cw_XXXX.bin.
Note, that for this @SHL implementation the key must be in Z 00 00 <key> format
(the V 000000 00 <key> format doesn't work).
For key logger (autoupdate, AU) with Irdeto, Seca and Viaccess you need valid
subscription card data, which have to be located in the files "Ird-Beta.KID",
"Seca.KID" or "Viaccess.KID". See the files in the "examples" subdirectory for
file formats.
To make the Nagra AU work, you must have appropriate binary Rom and Eeprom
files available. The files should be named "ROMX.bin", "ROMXext.bin" or
"eepX_Z.bin" where X is the ROM number (decimal) and Z is the upper part of the
provider ID (hexadecimal). The Eeprom files may be updated from the EMM data,
take care that the permissions are set right. The plugin searches for these
files in the "plugins/nagra" subdirectory.
For testing purpose you should start VDR in foreground always. The plugin gives
a lot of additional information to the console. This may be helpful in case it
doesn't work at once.
VDR CICAM setup:
----------------
The activation of the SC is controlled by your CICAM setup. As general setup
(which is not SC specific) you should leave the CA values (in channels.conf)
set to zero and let VDR's channel scanner (autopid) fill in the correct values.
Don't touch the CA values afterwards.
In the plugin setup menu, you now have to specify for which DVB cards the SC
should be activated. The first two cards can be setup from the menu. If you
need more, you can edit the setup.conf file manualy and add up to 10 cards.
SoftCSA/FFdecsa support:
------------------------
If you want to use the SoftCSA or FFdecsa feature, you have to apply the patch
BEFORE compiling the plugin. When compiling the plugin, the patch will be
detected and the plugin-specific code parts will be activated.
Concurrent Recordings:
----------------------
There are two entries in the plugin setup menu to control concurrent usage of a
DVB card.
"Concurrent streams per FF card" limits the number of concurrent streams on a
full-featured DVB card. Set this to 1 to disable FF concurrency, e.g. when not
using the special firmware.
"Concurrent streams SoftCSA" limits the number of concurrent streams decrypted
in software. This setting is global not on a per card basis. If you allow too
many software decrypted streams you can easily overload your CPU and ruin all
recordings.
Smartcard support:
------------------
For most encrpytion systems this plugin supports original subscription
smartcards on a Phoenix/Smartmouse ISO interface connected to a serial port.
To enable smartcard support you have to select one or more of the smartcard
systems on the make commandline. To actually activate the smartcard interface,
you should use the commandline option "-s" to specify one or more serial
devices to which the Phoenix interface are connected e.g. use "-s /dev/ttyS0 -s
/dev/ttyS1" to use two intefaces at COM1/COM2.
If you want to add a default smartcard interface at compile time use the make
option DEFAULT_PORT, e.g. DEFAULT_PORT='"/dev/ttyS0",0,0'. Note the quotes and
double quotes. The two numeric values are identical to the -I and -R options
below (set to 1 to enable).
Appearently there are "broken" card readers which swap the meaning of the CD
line (used for card detection). For these readers use the option "-I". This
enables inverse CD detection for the next interface e.g. "-I -s /dev/ttyS0 -s
/dev/ttyS1" will use inverse CD on COM1 and normal CD on COM2 while "-I -s
/dev/ttyS0 -I -s /dev/ttyS1" will use inverse CD on both.
Some other card readers have a reversed logic with the reset line (card won't
reset with default settings). You can use the option "-R" for these readers.
Some smartcards need additional information to establish communication with the
card (e.g. certificate or box key for camcrypt). These information must be
available in the "smartcard.conf" file (see example file for format) or you card
won't work correctly.
If you insert a card into a interface the card is autodetected (your interface
should use the CD line to signal card presence or it won't work) and
initialised (this may take some seconds to complete). You can use the setup
menu to see which cards are currently inserted and detected. You can remove a
smartcard at any time without prior action, but of course this will disrupt
decryption if you are tuned to a channel which requires the card.
Cardserver client
-----------------
The cardclient is a client for several cardservers. Supported cardservers are :
radegast, newcamd, camd33 (tcp), camd35 (udp), cardd, buffy and aroureos.
You can configure as many clients for different servers as you want. The client
configuration is read from the file "cardclient.conf". Every line in the file
defines a client-server connection. The line starts with the client name and is
followed by additional arguments which depend on the client type. See the file
"examples/cardclient.conf.example" for format and arguments.
The connections are tried in the order they are defined in the conf file until
a valid decryption is obtained. After that, the decryption sticks to that
particular connection until next channel switch.
The network code supports dialup on demand. To use this you have to provide an
external script to connect/disconnect your dialup link. Use commandline option
-d to set the script name and enable the feature, e.g. "-d dialup.sh". See the
example script "examples/dialup.sh.example". The network is brought up as soon
as an server connection is requested. All server connections will be
disconnected if they are idle too long (normaly after 120 seconds). The network
is brought down after the last connection has terminated and an additional
network timeout has expired. The network timeout is configurable with the
commandline option -t and defaults to 60 seconds, e.g. "-l 120".
The current cardclient implementation is loosely based on the Streamboard
client (contributed by S.Laurel from the Streamboard), which was included in
earlier releases.
-
DVB-S werkt wel op Mythtv, alleen lang niet zo makkelijk als VDR.
Ik vind linVDR echt een uitkomst, vooral de het opstarten gaat lekker snel (+- 20 sec bij mij) en met een Technotrend FF kaart binnen 10 minuten geinstalleerd.
-
Je kunt je kaart natuurlijk ook in je dm500 stoppen (newcamd cardserver bijv) en met de sc plugin voor linvdr op je dreambox connecten. Ik ben bezig geweest met newcamd en gbox op linVDR maar dat was me te ingewikkeld.
-
Op een_of_andere_veiling_site.de kom je regelmatig een siemens multitainer tegen voor 100 tot 150 euro, koop dan nog een 2dehands technotrend FF kaart voor +- 100 euro, en laat het draaien op linVDR en je hebt een HTPC die divx, dvd en dvb-s vloeiend afspeelt. Kaartsharing en epg werkt ook!
Het heeft me een weekendje gekost maar dan heb je ook wat leuks.
-
Je zou eens kunnen kijken naar Mythtv.
In Mythtv kan je de dreambox als tv-kaart instellen
Je streamt dan het beeld via utp naar je mythbox.
Ik heb hiermee al wel beeld, al wil het zappen via de remote van m'n hauppauge pvr-350 nog niet echt lukken.
-
Het werkt!
Alleen moeten jouw libs wel in /tmp staan
Ook heb ik in /lib een symlink naar jouw libstdc++.so.6.0.3 gemaakt.
-
Ik krijg dezelfde error, dus zal het wel niet aan libstdc++.so.6 liggen....
[color:"red"] ./ctorrent1
./ctorrent1: relocation error: ./ctorrent1: symbol _ZTIi, version CXXABI_1.3 not defined in file libstdc++.so.6 with link time reference [/color]
-
libcrypto.so.0.9.7 is al aanwezig op m'n box maar ook jouw versie helpt niet
[color:"red"] tmp > ./ctorrent1
./ctorrent1: relocation error: ./ctorrent1: symbol _ZTIi, version CXXABI_1.3 not defined in file libstdc++.so.6 with link time reference [/color]
-
Met een dm7000 en hydra phoenix
[color:"red"] /tmp > ./ctorrent1
./ctorrent1: relocation error: /tmp/libssl.so.0.9.7: undefined symbol: X509_free
/tmp > [/color]
-
Nee jammer, bij mij werkt ie niet
[color:"red"] ./ctorrent
./ctorrent: error while loading shared libraries: libssl.so.0.9.7: cannot open shared object file: No such file or directory
/tmp > [/color]
-
Ik heb nu in Makefile "LIBS = -lssl" veranderd in "LIBS = /home/tux/dbox2/cdkroot/lib/libssl.so".
Als ik nu make doe krijg ik dit:
tux@tuxbox:~/dbox2/cdk/bin/ctorrent-1.3.4$ make
make all-am
make[1]: Entering directory `/home/tux/dbox2/cdk/bin/ctorrent-1.3.4'
/home/tux/dbox2/cdk/powerpc-tuxbox-linux-gnu/bin/g++ -g -O2 -o ctorrent bencode.o bitfield.o btconfig.o btcontent.o btfiles.o btrequest.o btstream.o bufio.o connect_nonb.o ctorrent.o downloader.o httpencode.o iplist.o peer.o peerlist.o rate.o setnonblock.o sigint.o tracker.o /home/tux/dbox2/cdkroot/lib/libssl.so
btfiles.o(.text+0x524): In function `btFiles::_btf_recurses_directory(char const*, _btfile*)':
/home/tux/dbox2/cdk/bin/ctorrent-1.3.4/btfiles.cpp:172: warning: the `getwd' function is dangerous and should not be used.
btcontent.o(.text+0x30): In function `Sha1':
/home/tux/dbox2/cdk/bin/ctorrent-1.3.4/btcontent.cpp:45: undefined reference to `SHA1_Init'
btcontent.o(.text+0x40):/home/tux/dbox2/cdk/bin/ctorrent-1.3.4/btcontent.cpp:46: undefined reference to `SHA1_Update'
btcontent.o(.text+0x4c):/home/tux/dbox2/cdk/bin/ctorrent-1.3.4/btcontent.cpp:47: undefined reference to `SHA1_Final'
/home/tux/dbox2/cdkroot/lib/libssl.so: undefined reference to `BIO_find_type'
/home/tux/dbox2/cdkroot/lib/libssl.so: undefined reference to `EVP_enc_null'
/home/tux/dbox2/cdkroot/lib/libssl.so: undefined reference to `EVP_CIPHER_CTX_init'
/home/tux/dbox2/cdkroot/lib/libssl.so: undefined reference to `X509_NAME_dup'
/home/tux/dbox2/cdkroot/lib/libssl.so: undefined reference to `COMP_compress_block'
/home/tux/dbox2/cdkroot/lib/libssl.so: undefined reference to `sk_new_null'
/home/tux/dbox2/cdkroot/lib/libssl.so: undefined reference to `X509_STORE_get_by_subject'
/home/tux/dbox2/cdkroot/lib/libssl.so: undefined reference to `lh_free'
/home/tux/dbox2/cdkroot/lib/libssl.so: undefined reference to `EVP_VerifyFinal'
/home/tux/dbox2/cdkroot/lib/libssl.so: undefined reference to `COMP_CTX_new'
/home/tux/dbox2/cdkroot/lib/libssl.so: undefined reference to `sk_dup'
/home/tux/dbox2/cdkroot/lib/libssl.so: undefined reference to `X509_STORE_CTX_set_ex_data'
/home/tux/dbox2/cdkroot/lib/libssl.so: undefined reference to `X509_free'
/home/tux/dbox2/cdkroot/lib/libssl.so: undefined reference to `CRYPTO_get_ex_data'
/home/tux/dbox2/cdkroot/lib/libssl.so: undefined reference to `BN_bin2bn'
/home/tux/dbox2/cdkroot/lib/libssl.so: undefined reference to `CRYPTO_get_ex_new_index'
/home/tux/dbox2/cdkroot/lib/libssl.so: undefined reference to `EVP_DigestFinal_ex'
Enig idee waar ik SHA1 kan toevoegen?
-
Ik heb in Makefile "libs = -lssl" staan. Ik heb geen idee hoe ik het -L pad naar m'n targetlibs toevoeg..
Ook kan ik de ssl config file niet vinden om naar SHA te zoeken, wellicht dat dat zou kunnen komen doordat de "make all extra" werd gehinderd door een error, maar m'n crosscompiler werkt wel <img src="/forums/images/graemlins/grin.gif" alt="" />
Hieronder een deel van Ctorrent Makefile:
srcdir = .
top_srcdir = .
pkgdatadir = $(datadir)/ctorrent
pkglibdir = $(libdir)/ctorrent
pkgincludedir = $(includedir)/ctorrent
top_builddir = .
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
INSTALL = /usr/bin/install -c
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
ACLOCAL = ${SHELL} /home/tux/dbox2/cdk/bin/ctorrent-1.3.4/missing --run aclocal-1.7
AMDEP_FALSE = #
AMDEP_TRUE =
AMTAR = ${SHELL} /home/tux/dbox2/cdk/bin/ctorrent-1.3.4/missing --run tar
AUTOCONF = ${SHELL} /home/tux/dbox2/cdk/bin/ctorrent-1.3.4/missing --run autoconf
AUTOHEADER = ${SHELL} /home/tux/dbox2/cdk/bin/ctorrent-1.3.4/missing --run autoheader
AUTOMAKE = ${SHELL} /home/tux/dbox2/cdk/bin/ctorrent-1.3.4/missing --run automake-1.7
AWK = mawk
CC = /home/tux/dbox2/cdk/powerpc-tuxbox-linux-gnu/bin/gcc
CCDEPMODE = depmode=gcc3
CFLAGS = -g -O2
CPP = /home/tux/dbox2/cdk/powerpc-tuxbox-linux-gnu/bin/gcc -E
CPPFLAGS =
CXX = /home/tux/dbox2/cdk/powerpc-tuxbox-linux-gnu/bin/g++
CXXDEPMODE = depmode=gcc3
CXXFLAGS = -g -O2
CYGPATH_W = echo
DEFS = -DHAVE_CONFIG_H
DEPDIR = .deps
ECHO_C =
ECHO_N = -n
ECHO_T =
EGREP = grep -E
EXEEXT =
INSTALL_DATA = ${INSTALL} -m 644
INSTALL_PROGRAM = ${INSTALL}
INSTALL_SCRIPT = ${INSTALL}
INSTALL_STRIP_PROGRAM = ${SHELL} $(install_sh) -c -s
LDFLAGS =
LIBOBJS =
LIBS = -lssl
LTLIBOBJS =
MAKEINFO = ${SHELL} /home/tux/dbox2/cdk/bin/ctorrent-1.3.4/missing --run makeinfo
OBJEXT = o
PACKAGE = ctorrent
PACKAGE_BUGREPORT = bsdi@sina.com
PACKAGE_NAME = CTorrent
PACKAGE_STRING = CTorrent devel
PACKAGE_TARNAME = ctorrent
PACKAGE_VERSION = devel
PATH_SEPARATOR = :
SET_MAKE =
SHELL = /bin/sh
STRIP =
VERSION = devel
ac_ct_CC = /home/tux/dbox2/cdk/powerpc-tuxbox-linux-gnu/bin/gcc
ac_ct_CXX = /home/tux/dbox2/cdk/powerpc-tuxbox-linux-gnu/bin/g++
ac_ct_STRIP =
am__fastdepCC_FALSE = #
am__fastdepCC_TRUE =
am__fastdepCXX_FALSE = #
am__fastdepCXX_TRUE =
am__include = include
am__leading_dot = .
am__quote =
bindir = ${exec_prefix}/bin
build_alias =
datadir = ${prefix}/share
exec_prefix = ${prefix}
host_alias =
includedir = ${prefix}/include
infodir = ${prefix}/info
install_sh = /home/tux/dbox2/cdk/bin/ctorrent-1.3.4/install-sh
libdir = ${exec_prefix}/lib
libexecdir = ${exec_prefix}/libexec
localstatedir = ${prefix}/var
mandir = ${prefix}/man
oldincludedir = /usr/include
prefix = /home/tux/dbox2/cdk/bin/ctorrent-1.3.4/run
program_transform_name = s,x,x,
sbindir = ${exec_prefix}/sbin
sharedstatedir = ${prefix}/com
sysconfdir = ${prefix}/etc
target_alias =
bin_PROGRAMS = ctorrent
ctorrent_SOURCES = bencode.cpp bitfield.cpp btconfig.cpp btcontent.cpp btfiles.cpp btrequest.cpp btstream.cpp bufio.cpp connect_nonb.cpp ctorrent.cpp downloader.cpp httpencode.cpp iplist.cpp peer.cpp peerlist.cpp rate.cpp setnonblock.cpp sigint.cpp tracker.cpp bencode.h bitfield.h btconfig.h btcontent.h btfiles.h btrequest.h btstream.h bufio.h connect_nonb.h def.h downloader.h httpencode.h iplist.h msgencode.h peer.h peerlist.h rate.h setnonblock.h sigint.h tracker.h
subdir = .
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
CONFIG_HEADER = config.h
CONFIG_CLEAN_FILES =
bin_PROGRAMS = ctorrent$(EXEEXT)
PROGRAMS = $(bin_PROGRAMS)
-
Openssl werd meegecompileerd tijdens make all extra, als ik me niet vergis.
Na ./configure heb ik met de hand Makefile geedit zodat de crosscompiler wordt gebruikt ipv de standaard compiler.
Ik hoop dat dat de goede procedure is..(ik word dan ook niet gehinderd door enige vorm van kennis <img src="/forums/images/graemlins/smile.gif" alt="" /> )
-
Ik kom met ctorrent niet verder..
Ik krijg een hele rits "undefined reference" meldingen tijdens make.
/home/tux/dbox2/cdk/bin/ctorrent-1.3.4/btcontent.cpp:45: undefined reference to
`SHA1_Init'
btcontent.o(.text+0x40):/home/tux/dbox2/cdk/bin/ctorrent-1.3.4/btcontent.cpp:46:
undefined reference to `SHA1_Update'
btcontent.o(.text+0x4c):/home/tux/dbox2/cdk/bin/ctorrent-1.3.4/btcontent.cpp:47:
undefined reference to `SHA1_Final'
Zou het kunnen zijn dat libssl.so.0.9.7 niet werkt met ctorrent 1.3.4?
-
Jij mag dit onzin VINDEN maar zeggen dat het onzin is lijkt me nog al een boute statement daar het bij mij wel degelijk werkte.
Ik vond de oplossing hier in een bericht van _gerben_
-
ik moest om m'n stick te kunnen mounten de directories mnt en usb aanmaken in var, wellicht dat het helpt!
-
Hier exact hetzelfde ik draai de laatste ronald vanaf de usb
-
offtopic
En als de Europese regelgeving nu ook iets zou doen tegen
Hollywood met z'n verstikkende beleid tav de uitzendrechten
zouden abonnementen een stuk goedkoper worden.
/offtopic
-
Toestemming heb ik al gevraagd maar ik heb helaas nog geen antwoord gekregen.
De schotelantenne staat niet op het dakterras maar op het dakje van de deur die uitkomt op het dakterras, het is dus echt niet een plek waar je zo ff naar toe loopt. Je moet over de dakpannen klauteren om er te komen.
-
Ik heb vanaf mijn balkon geen zicht op het zuiden vandaar dat ik hem op een voet heb geplaatst.
Die voet bevindt zich boven de deur van het gemeenschappelijke dakterras.
Je kunt op ook niet op dat kleine dakje komen zonder je rotnek te breken. Dit alles heb ik gedaan na goed overleg met mijn buren en de bewonerscommissie.
-
Ik heb de brief van Pre wonen maar overgetikt want m'n scanner is kapot <img src="/ubbthreads/images/graemlins/biggthumpdown.gif" alt="" />
Geachte heer Randkalf,
Onlangs heeft onze woonconsulent geconstateerd dat u een schotelantenne op het dak van de algemene ruimte van de flat van Pre Wonen op ADRES heeft geplaatst. U heeft de antenne geplaatst zonder onze toestemming.
Daarmee bent u in overtreding van artikel 7.12 van de Algemene Voorwaarden Huurovereenkomst Zelfstandige Woonruimte die luidt: Het is de huurder niet toegestaan, zonder voorafgaande toestemming van verhuurder, aan het gehuurde zaken of installaties aan te brengen, zoals een (schotel)antenne of zonnepaneel. Huurder dient een verzoek tot deze toestemming schriftelijk bij de verhuurder in te dienen.
Verhuurder kan deze toestemming weigeren of voorwaarden aan deze toestemming verbinden.
Wij sommeren u voor 23 mei 2004 de antenne te verwijderen of hiervoor schriftelijk toestemming te vragen. Indien u hier geen gehoor aan geeft, zal Pre Wonen de antenne op uw kosten verwijderen.
Wij gaan ervan uit u hierbij voldoende geinformeerd te hebben.
Met vriendelijke groet
bla bla
-
Zodra ik vanmidaag thuis ben zal ik hem eens posten
Software voor HTPC met sat
in Mediaspelers (hard- en software)
Geplaatst:
Ik heb goede ervaringen met linvdr.
Het is supersnel geinstalleerd en het booten duurt +- 30 sec
Verder kun je gbox als emu gebruiken of vdr-sc die onder andere newcamd en camd3 ondersteund.
Uiteraard werkt het afspelen van divx dvd vlekkeloos.