[kan xbmc niet opstarten]

Ben er uit ,heb ubuntu 11.04 opnieuw gedownload op usb stick gezet en geinstalleerd.

Xbmc geinstalleerd en alles doet het weer.

Weet niet wat het probleem was maar hij doet het weer.

In ieder geval bedankt.

 

Gr R

[kan xbmc niet opstarten]

rienan@rienan-desktop:~$ /usr/lib/nux/unity_support_test -p

Xlib: extension "GLX" missing on display ":0.0".

Xlib: extension "GLX" missing on display ":0.0".

Xlib: extension "GLX" missing on display ":0.0".

Error: unable to create the OpenGL context

dit geeft ie voor het eerste aan.

 

WARNING: you should run this program as super-user.

*-display

description: VGA compatible controller

product: Core Processor Integrated Graphics Controller

vendor: Intel Corporation

physical id: 2

bus info: pci@0000:00:02.0

version: 12

width: 64 bits

clock: 33MHz

capabilities: vga_controller bus_master cap_list rom

configuration: driver=i915 latency=0

resources: irq:42 memory:f0000000-f03fffff memory:e0000000-efffffff ioport:10c8(size=8)

WARNING: output may be incomplete or inaccurate, you should run this program as super-user.

en voor de tweede.

[kan xbmc niet opstarten]

Initializing bailer options...done

Initializing detection options...done

Initializing composite options...done

Xlib: extension "GLX" missing on display ":0.0".

Xlib: extension "GLX" missing on display ":0.0".

Xlib: extension "GLX" missing on display ":0.0".

Compiz (opengl) - Fatal: glXCreateContext failed

Compiz (bailer) - Info: Ensuring a shell for your session

rienan@rienan-desktop:~$ Cannot register the panel shell: there is already one running.

dit geeft ie aan het eind aan.

[kan xbmc niet opstarten]

jazeker doe ik het in de terminal,en dan komt er een hele lijst en aan het eind zegt ie is al geinstalleerd, maar er gebeurd niets.

 

Gr R

p.s

Cannot register the panel shell: there is already one running.

 

[kan xbmc niet opstarten]

Heb ik gedaan maar hij zegt is al geinstalleerd , en verder gebeurd er niks.

 

Gr R

[kan xbmc niet opstarten]

Wat moet ik dan intikken gewoon unity.

[kan xbmc niet opstarten]

Hallo

Ik draaide tot voor kort ubuntu 11.04 lts met daarop xbmc ging perfect tot een computer chrash.

Moest alles opnieuw installeren,zo gezegd zo gedaan maar als ik nu xbmc wil opstarten zegt ie dat ie openGl moet gebruiken voor rendering.Hoe krijg ik dat er weer in?

En het tweede punt na het opnieuw installeren van ubuntu heb ik aan de linkerkant een opstartbalk ,als ik via de terminal xbmc installeer en daarna opnieuw opstart is die verdwenen???? hoe krijg ik die terug?Heb dit alles al drie keer opnieuw geinstalleerd maar elke keer het zelfde liedje,ik krijg er zo langzamerhand genoeg van want dit is niet leuk meer.

Mijn htpc heeft de volgende configuratie intel core i3 clarkdale 4 gig geh 64mb ssd dus geen video kaart (deze zit in de cpu).

Tot voorkort draaide het perfect maar kan het nu niet meer goede kijgen.

Alle hulp is welkom.

 

Gr R

 

[kan MKV's niet verwijderen]

ja sorry hoor maar daar heb ik geen kaas van gegeten.

Ik kan windows installeren e.d maar dan houdt het op.

Als er eens iets mis gaat grijp ik naar andere middelen zoals formateren of opnieuw installeren , ik gebruik dat ding toch alleen maar voor downloaden en filmpjes kijken e.d .

 

Gr R

[kan MKV's niet verwijderen]

Hoe krijg ik rechten als beheerder?

Ben nu alles wat ik wil houden aan het overpompen op mijn andere

nas ,en daarna ga ik de schijf formateren.

Unlocker ook al geprobeerd werkt ook niet.

 

Gr Rienan

[kan MKV's niet verwijderen]

unlocker zal ik nog eens proberen ,bedankt.

 

Gr R

[kan MKV's niet verwijderen]

Heb ik al veranderd maar als ik dan op toepassen klik en ok en daarna staat alles weer gelijk zoals het was.

[kan MKV's niet verwijderen]

Oke bedankt zal eens in de nas duiken.

 

 

Gr R

[kan MKV's niet verwijderen]

waarom kan ik dan die andere mkv's wel verwijderen en alleen deze niet.

 

gr R

 

p.s Ik heb de nas een schijfletter toegewezen en dan log ik in via mijn computer.

[kan MKV's niet verwijderen]

Ik heb het al geprobeerd met windows 7 ultimate en met linux Ubuntu, maar beide zeggen dat ik niet gemachtigd ben.

Ik snap er niks meer van, ik heb ongeveer 30 serie's op de nas staan allemaal mkv's en die kan ik allemaal verwijderen alleen deze niet.

Gr R

[kan MKV's niet verwijderen]

Heb op mijn nas een serie van ruim 19 gig staan die ik wil verwijderen,maar als ik op verwijderen klik zegt ie dat ik niet gemachtigd ben om dit te doen,hoe kan ik deze file's wegkrijgen.

 

Gr R

[na upgrade naar ubuntu 11.04 geen geluid meer.]

ik heb het nu anders aangepakt,heb hier 2 htpc,s staan.

1 ion en een intel systeem.Op het ion systeempje draaide ubuntu 10.04 met xbmc , en dat draaide perfect.

Op de intel machine met een clarkdale i530 procc.draaide windows 7 ultmate ook perfect.

Na de upgrade van de ion naar ubuntu 11.04 dus geen geluid en geen afstandbediening meer, wat ik ook probeerde.

Nu heb ik alles omgedraaid ,ultimate op de ion en ubuntu 11.04 op het intel systeem met Xbmc .En het draaid nu goed met geluid over HDMI.

Alleen de afstandbediening die wil nog steeds niet,maar daar heb ik wat anders opgevonden XBMC remote op mijn smartphome.

Dus na flink wat geklooi draaid alles nu weer goed.

 

Gr R

[na upgrade naar ubuntu 11.04 geen geluid meer.]

Ik heb de handdoek in de ring gegooid.

Nadat ik die wiki geprobeerd heb liep alles in de honderd.

Ik heb ultimate er weer opgezet en ga met mce stoeien.

Toch bedankt.

 

Gr R

[na upgrade naar ubuntu 11.04 geen geluid meer.]

Als ik de alsamixer open staat s/sdif 1 er niet bij.

[na upgrade naar ubuntu 11.04 geen geluid meer.]

Dit gaat helemaal fout,ik heb de alsamixer gekopieerd maar dat gaat niet goede dus.

[na upgrade naar ubuntu 11.04 geen geluid meer.]

Hallo

Dit geeft dmesg aan. 0.448455] ACPI: PCI Interrupt Link [LN1D] (IRQs 16 17 18 19) *0, disabled.

[ 0.448917] ACPI: PCI Interrupt Link [LN2A] (IRQs 16 17 18 19) *0, disabled.

[ 0.449346] ACPI: PCI Interrupt Link [LN2B] (IRQs 16 17 18 19) *0, disabled.

[ 0.449768] ACPI: PCI Interrupt Link [LN2C] (IRQs 16 17 18 19) *0, disabled.

[ 0.450269] ACPI: PCI Interrupt Link [LN2D] (IRQs 16 17 18 19) *0, disabled.

[ 0.450698] ACPI: PCI Interrupt Link [LN3A] (IRQs 16 17 18 19) *0, disabled.

[ 0.451134] ACPI: PCI Interrupt Link [LN3B] (IRQs 16 17 18 19) *0, disabled.

[ 0.451616] ACPI: PCI Interrupt Link [LN3C] (IRQs 16 17 18 19) *0, disabled.

[ 0.452063] ACPI: PCI Interrupt Link [LN3D] (IRQs 16 17 18 19) *0, disabled.

[ 0.452487] ACPI: PCI Interrupt Link [LN4A] (IRQs 16 17 18 19) *0, disabled.

[ 0.452912] ACPI: PCI Interrupt Link [LN4B] (IRQs 16 17 18 19) *0, disabled.

[ 0.453321] ACPI: PCI Interrupt Link [LN4C] (IRQs 16 17 18 19) *0, disabled.

[ 0.453752] ACPI: PCI Interrupt Link [LN4D] (IRQs 16 17 18 19) *0, disabled.

[ 0.454168] ACPI: PCI Interrupt Link [LN5A] (IRQs 16 17 18 19) *0, disabled.

[ 0.454591] ACPI: PCI Interrupt Link [LN5B] (IRQs 16 17 18 19) *0, disabled.

[ 0.455008] ACPI: PCI Interrupt Link [LN5C] (IRQs 16 17 18 19) *0, disabled.

[ 0.455418] ACPI: PCI Interrupt Link [LN5D] (IRQs 16 17 18 19) *0, disabled.

[ 0.455873] ACPI: PCI Interrupt Link [LN6A] (IRQs 16 17 18 19) *0, disabled.

[ 0.456344] ACPI: PCI Interrupt Link [LN6B] (IRQs 16 17 18 19) *0, disabled.

[ 0.456787] ACPI: PCI Interrupt Link [LN6C] (IRQs 16 17 18 19) *0, disabled.

[ 0.457200] ACPI: PCI Interrupt Link [LN6D] (IRQs 16 17 18 19) *0, disabled.

[ 0.457644] ACPI: PCI Interrupt Link [LUB0] (IRQs 16) *14

[ 0.458075] ACPI: PCI Interrupt Link [LUB2] (IRQs 18) *7

[ 0.458514] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *11

[ 0.458943] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *10

[ 0.459367] ACPI: PCI Interrupt Link [sGRU] (IRQs 20 21 22 23) *11

[ 0.459811] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *9

[ 0.460269] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *15

[ 0.460721] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *5

[ 0.461194] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled.

[ 0.461619] ACPI: PCI Interrupt Link [uB11] (IRQs 17) *0, disabled.

[ 0.462033] ACPI: PCI Interrupt Link [uB12] (IRQs 19) *0, disabled.

[ 0.462455] ACPI: PCI Interrupt Link [LRP0] (IRQs 20 21 22 23) *10

[ 0.462894] ACPI: PCI Interrupt Link [LRP1] (IRQs 20 21 22 23) *0, disabled.

[ 0.463319] ACPI: PCI Interrupt Link [LRP2] (IRQs 20 21 22 23) *0, disabled.

[ 0.463775] ACPI: PCI Interrupt Link [LRP3] (IRQs 20 21 22 23) *0, disabled.

[ 0.464230] ACPI: PCI Interrupt Link [LRP4] (IRQs 20 21 22 23) *0, disabled.

[ 0.464668] ACPI: PCI Interrupt Link [LRP5] (IRQs 20 21 22 23) *0, disabled.

[ 0.465085] ACPI: PCI Interrupt Link [LRP6] (IRQs 20 21 22 23) *0, disabled.

[ 0.465485] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none

[ 0.465497] vgaarb: loaded

[ 0.466324] SCSI subsystem initialized

[ 0.466518] libata version 3.00 loaded.

[ 0.466722] usbcore: registered new interface driver usbfs

[ 0.466771] usbcore: registered new interface driver hub

[ 0.466891] usbcore: registered new device driver usb

[ 0.468276] wmi: Mapper loaded

[ 0.468283] PCI: Using ACPI for IRQ routing

[ 0.468300] PCI: pci_cache_line_size set to 64 bytes

[ 0.468439] reserve RAM buffer: 000000000009e800 - 000000000009ffff

[ 0.468448] reserve RAM buffer: 000000006ffa0000 - 000000006fffffff

[ 0.468826] NetLabel: Initializing

[ 0.468833] NetLabel: domain hash size = 128

[ 0.468839] NetLabel: protocols = UNLABELED CIPSOv4

[ 0.468873] NetLabel: unlabeled traffic allowed by default

[ 0.494421] AppArmor: AppArmor Filesystem Enabled

[ 0.494519] pnp: PnP ACPI init

[ 0.494582] ACPI: bus type pnp registered

[ 0.495030] pnp 00:00: [bus 00-ff]

[ 0.495042] pnp 00:00: [io 0x0cf8-0x0cff]

[ 0.495051] pnp 00:00: [io 0x0000-0x0cf7 window]

[ 0.495059] pnp 00:00: [io 0x0d00-0xffff window]

[ 0.495068] pnp 00:00: [mem 0x000a0000-0x000bffff window]

[ 0.495077] pnp 00:00: [mem 0x000d0000-0x000dffff window]

[ 0.495086] pnp 00:00: [mem 0x80000000-0xfbffffff window]

[ 0.495095] pnp 00:00: [mem 0xfe000000-0xfebfffff window]

[ 0.495311] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)

[ 0.495420] pnp 00:01: [dma 4]

[ 0.495428] pnp 00:01: [io 0x0000-0x000f]

[ 0.495436] pnp 00:01: [io 0x0081-0x0083]

[ 0.495444] pnp 00:01: [io 0x0087]

[ 0.495451] pnp 00:01: [io 0x0089-0x008b]

[ 0.495458] pnp 00:01: [io 0x008f]

[ 0.495465] pnp 00:01: [io 0x00c0-0x00df]

[ 0.495562] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)

[ 0.495598] pnp 00:02: [io 0x0061]

[ 0.495691] pnp 00:02: Plug and Play ACPI device, IDs PNP0800 (active)

[ 0.495728] pnp 00:03: [io 0x00f0-0x00ff]

[ 0.495754] pnp 00:03: [irq 13]

[ 0.495865] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)

[ 0.497055] pnp 00:04: [mem 0x000d0000-0x000d3fff window]

[ 0.497067] pnp 00:04: [mem 0x000d4000-0x000d7fff window]

[ 0.497076] pnp 00:04: [mem 0x000de000-0x000dffff window]

[ 0.497084] pnp 00:04: [io 0x0010-0x001f]

[ 0.497092] pnp 00:04: [io 0x0022-0x003f]

[ 0.497099] pnp 00:04: [io 0x0044-0x004d]

[ 0.497113] pnp 00:04: [io 0x0050-0x005f]

[ 0.497121] pnp 00:04: [io 0x0062-0x0063]

[ 0.497128] pnp 00:04: [io 0x0065-0x006f]

[ 0.497136] pnp 00:04: [io 0x0072-0x007f]

[ 0.497143] pnp 00:04: [io 0x0080]

[ 0.497150] pnp 00:04: [io 0x0084-0x0086]

[ 0.497157] pnp 00:04: [io 0x0088]

[ 0.497165] pnp 00:04: [io 0x008c-0x008e]

[ 0.497172] pnp 00:04: [io 0x0090-0x009f]

[ 0.497180] pnp 00:04: [io 0x00a2-0x00bf]

[ 0.497187] pnp 00:04: [io 0x00e0-0x00ef]

[ 0.497195] pnp 00:04: [io 0x04d0-0x04d1]

[ 0.497203] pnp 00:04: [io 0x0800-0x080f]

[ 0.497210] pnp 00:04: [io 0x4000-0x407f]

[ 0.497218] pnp 00:04: [io 0x4080-0x40ff]

[ 0.497226] pnp 00:04: [io 0x4400-0x447f]

[ 0.497233] pnp 00:04: [io 0x4480-0x44ff]

[ 0.497241] pnp 00:04: [io 0x4800-0x487f]

[ 0.497248] pnp 00:04: [io 0x4880-0x48ff]

[ 0.497257] pnp 00:04: [mem 0x00000000-0xffffffff disabled]

[ 0.497266] pnp 00:04: [mem 0xfefe2000-0xfefe3fff]

[ 0.497274] pnp 00:04: [mem 0xfefe1000-0xfefe1fff]

[ 0.497282] pnp 00:04: [mem 0xfee01000-0xfeefffff]

[ 0.497540] system 00:04: [io 0x04d0-0x04d1] has been reserved

[ 0.497552] system 00:04: [io 0x0800-0x080f] has been reserved

[ 0.497562] system 00:04: [io 0x4000-0x407f] has been reserved

[ 0.497572] system 00:04: [io 0x4080-0x40ff] has been reserved

[ 0.497582] system 00:04: [io 0x4400-0x447f] has been reserved

[ 0.497591] system 00:04: [io 0x4480-0x44ff] has been reserved

[ 0.497601] system 00:04: [io 0x4800-0x487f] has been reserved

[ 0.497611] system 00:04: [io 0x4880-0x48ff] has been reserved

[ 0.497622] system 00:04: [mem 0x000d0000-0x000d3fff window] has been reserved

[ 0.497633] system 00:04: [mem 0x000d4000-0x000d7fff window] has been reserved

[ 0.497644] system 00:04: [mem 0x000de000-0x000dffff window] has been reserved

[ 0.497655] system 00:04: [mem 0xfefe2000-0xfefe3fff] has been reserved

[ 0.497666] system 00:04: [mem 0xfefe1000-0xfefe1fff] has been reserved

[ 0.497676] system 00:04: [mem 0xfee01000-0xfeefffff] has been reserved

[ 0.497689] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)

[ 0.497919] pnp 00:05: [io 0x0070-0x0071]

[ 0.497949] pnp 00:05: [irq 8]

[ 0.498061] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)

[ 0.498405] pnp 00:06: [io 0x0060]

[ 0.498413] pnp 00:06: [io 0x0064]

[ 0.498422] pnp 00:06: [mem 0xfec00000-0xfec00fff]

[ 0.498430] pnp 00:06: [mem 0xfee00000-0xfee00fff]

[ 0.498583] system 00:06: [mem 0xfec00000-0xfec00fff] could not be reserved

[ 0.498594] system 00:06: [mem 0xfee00000-0xfee00fff] has been reserved

[ 0.498606] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)

[ 0.499590] pnp 00:07: [io 0x03f8-0x03ff]

[ 0.499614] pnp 00:07: [irq 4]

[ 0.499622] pnp 00:07: [dma 0 disabled]

[ 0.499868] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)

[ 0.500575] pnp 00:08: [io 0x0000-0xffffffff disabled]

[ 0.500586] pnp 00:08: [io 0x0000-0xffffffff disabled]

[ 0.500595] pnp 00:08: [io 0x0290-0x029f]

[ 0.500764] system 00:08: [io 0x0290-0x029f] has been reserved

[ 0.500777] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)

[ 0.500980] pnp 00:09: [mem 0xfc000000-0xfdffffff]

[ 0.501148] system 00:09: [mem 0xfc000000-0xfdffffff] has been reserved

[ 0.501161] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)

[ 0.501741] pnp 00:0a: [mem 0x00000000-0x0009ffff]

[ 0.501751] pnp 00:0a: [mem 0x000c0000-0x000cffff]

[ 0.501759] pnp 00:0a: [mem 0x000e0000-0x000fffff]

[ 0.501767] pnp 00:0a: [mem 0x00100000-0x7fffffff]

[ 0.501776] pnp 00:0a: [mem 0xfec00000-0xffffffff]

[ 0.501967] system 00:0a: [mem 0x00000000-0x0009ffff] could not be reserved

[ 0.501980] system 00:0a: [mem 0x000c0000-0x000cffff] could not be reserved

[ 0.501991] system 00:0a: [mem 0x000e0000-0x000fffff] could not be reserved

[ 0.502001] system 00:0a: [mem 0x00100000-0x7fffffff] could not be reserved

[ 0.502012] system 00:0a: [mem 0xfec00000-0xffffffff] could not be reserved

[ 0.502027] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)

[ 0.505089] pnp: PnP ACPI: found 11 devices

[ 0.505100] ACPI: ACPI bus type pnp unregistered

[ 0.505111] PnPBIOS: Disabled by ACPI PNP

[ 0.547472] Switching to clocksource acpi_pm

[ 0.547617] pci 0000:00:09.0: PCI bridge to [bus 03-03]

[ 0.547626] pci 0000:00:09.0: bridge window [io disabled]

[ 0.547637] pci 0000:00:09.0: bridge window [mem disabled]

[ 0.547646] pci 0000:00:09.0: bridge window [mem pref disabled]

[ 0.547659] pci 0000:00:0c.0: PCI bridge to [bus 02-02]

[ 0.547666] pci 0000:00:0c.0: bridge window [io disabled]

[ 0.547683] pci 0000:00:0c.0: bridge window [mem disabled]

[ 0.547700] pci 0000:00:0c.0: bridge window [mem 0xf9f00000-0xf9ffffff 64bit pref]

[ 0.547723] pci 0000:00:10.0: PCI bridge to [bus 01-01]

[ 0.547732] pci 0000:00:10.0: bridge window [io 0xe000-0xefff]

[ 0.547744] pci 0000:00:10.0: bridge window [mem 0xfaf00000-0xfbffffff]

[ 0.547755] pci 0000:00:10.0: bridge window [mem 0xe0000000-0xf7ffffff 64bit pref]

[ 0.547783] pci 0000:00:09.0: setting latency timer to 64

[ 0.547783] Switched to NOHz mode on CPU #0

[ 0.547501] Switched to NOHz mode on CPU #3

[ 0.547491] Switched to NOHz mode on CPU #1

[ 0.547495] Switched to NOHz mode on CPU #2

[ 0.547783] ACPI: PCI Interrupt Link [LRP0] enabled at IRQ 23

[ 0.547783] pci 0000:00:0c.0: PCI INT A -> Link[LRP0] -> GSI 23 (level, low) -> IRQ 23

[ 0.547783] pci 0000:00:0c.0: setting latency timer to 64

[ 0.547783] pci 0000:00:10.0: setting latency timer to 64

[ 0.547783] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]

[ 0.547783] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]

[ 0.547783] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]

[ 0.547783] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]

[ 0.547783] pci_bus 0000:00: resource 8 [mem 0x80000000-0xfbffffff]

[ 0.547783] pci_bus 0000:00: resource 9 [mem 0xfe000000-0xfebfffff]

[ 0.547783] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7]

[ 0.547783] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff]

[ 0.547783] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]

[ 0.547783] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000dffff]

[ 0.547783] pci_bus 0000:03: resource 8 [mem 0x80000000-0xfbffffff]

[ 0.547783] pci_bus 0000:03: resource 9 [mem 0xfe000000-0xfebfffff]

[ 0.547783] pci_bus 0000:02: resource 2 [mem 0xf9f00000-0xf9ffffff 64bit pref]

[ 0.547783] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]

[ 0.547783] pci_bus 0000:01: resource 1 [mem 0xfaf00000-0xfbffffff]

[ 0.547783] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xf7ffffff 64bit pref]

[ 0.547783] NET: Registered protocol family 2

[ 0.547783] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)

[ 0.547783] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)

[ 0.547783] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)

[ 0.548268] TCP: Hash tables configured (established 131072 bind 65536)

[ 0.548283] TCP reno registered

[ 0.548300] UDP hash table entries: 512 (order: 2, 16384 bytes)

[ 0.548328] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)

[ 0.548642] NET: Registered protocol family 1

[ 0.588262] pci 0000:01:00.0: Boot video device

[ 0.588277] PCI: CLS 64 bytes, default 64

[ 0.589381] cpufreq-nforce2: No nForce2 chipset.

[ 0.589886] audit: initializing netlink socket (disabled)

[ 0.589916] type=2000 audit(1305980858.584:1): initialized

[ 0.614823] highmem bounce pool size: 64 pages

[ 0.614844] HugeTLB registered 4 MB page size, pre-allocated 0 pages

[ 0.621950] VFS: Disk quotas dquot_6.5.2

[ 0.622168] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)

[ 0.624860] fuse init (API version 7.16)

[ 0.625255] msgmni has been set to 1684

[ 0.626206] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)

[ 0.626332] io scheduler noop registered

[ 0.626340] io scheduler deadline registered

[ 0.626402] io scheduler cfq registered (default)

[ 0.626774] pcieport 0000:00:0c.0: setting latency timer to 64

[ 0.626953] pcieport 0000:00:0c.0: irq 40 for MSI/MSI-X

[ 0.627344] pcieport 0000:00:0c.0: Signaling PME through PCIe PME interrupt

[ 0.627361] pcie_pme 0000:00:0c.0:pcie01: service driver pcie_pme loaded

[ 0.627436] pci_hotplug: PCI Hot Plug PCI Core version: 0.5

[ 0.627540] pciehp: PCI Express Hot Plug Controller Driver version: 0.4

[ 0.627751] intel_idle: MWAIT substates: 0x10

[ 0.627783] intel_idle: v0.4 model 0x1C

[ 0.627789] intel_idle: lapic_timer_reliable_states 0x2

[ 0.628282] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0

[ 0.628299] ACPI: Power Button [PWRB]

[ 0.628517] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1

[ 0.628530] ACPI: Power Button [PWRF]

[ 0.629112] ACPI: acpi_idle yielding to intel_idle

[ 0.638510] ERST: Table is not found!

[ 0.638785] isapnp: Scanning for PnP cards...

[ 0.638823] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled

[ 0.659368] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A

[ 0.992301] isapnp: No Plug & Play device found

[ 1.029571] Freeing initrd memory: 12516k freed

[ 1.081228] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A

[ 1.081850] Linux agpgart interface v0.103

[ 1.085444] brd: module loaded

[ 1.087144] loop: module loaded

[ 1.087418] i2c-core: driver [adp5520] using legacy suspend method

[ 1.087424] i2c-core: driver [adp5520] using legacy resume method

[ 1.088723] Fixed MDIO Bus: probed

[ 1.088845] PPP generic driver version 2.4.2

[ 1.088979] tun: Universal TUN/TAP device driver, 1.6

[ 1.088985] tun: © 1999-2004 Max Krasnyansky <maxk@qualcomm.com>

[ 1.089240] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver

[ 1.089801] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 18

[ 1.089837] ehci_hcd 0000:00:04.1: PCI INT B -> Link[LUB2] -> GSI 18 (level, low) -> IRQ 18

[ 1.089870] ehci_hcd 0000:00:04.1: setting latency timer to 64

[ 1.089878] ehci_hcd 0000:00:04.1: EHCI Host Controller

[ 1.090000] ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 1

[ 1.090132] ehci_hcd 0000:00:04.1: debug port 1

[ 1.090147] ehci_hcd 0000:00:04.1: cache line size of 64 is not supported

[ 1.090184] ehci_hcd 0000:00:04.1: irq 18, io mem 0xfae7ec00

[ 1.100048] ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00

[ 1.100374] hub 1-0:1.0: USB hub found

[ 1.100387] hub 1-0:1.0: 10 ports detected

[ 1.100581] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver

[ 1.101120] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 16

[ 1.101151] ohci_hcd 0000:00:04.0: PCI INT A -> Link[LUB0] -> GSI 16 (level, low) -> IRQ 16

[ 1.101182] ohci_hcd 0000:00:04.0: setting latency timer to 64

[ 1.101189] ohci_hcd 0000:00:04.0: OHCI Host Controller

[ 1.101322] ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 2

[ 1.101440] ohci_hcd 0000:00:04.0: irq 16, io mem 0xfae7f000

[ 1.158327] hub 2-0:1.0: USB hub found

[ 1.158340] hub 2-0:1.0: 10 ports detected

[ 1.158522] uhci_hcd: USB Universal Host Controller Interface driver

[ 1.158729] i8042: PNP: No PS/2 controller found. Probing ports directly.

[ 1.161708] serio: i8042 KBD port at 0x60,0x64 irq 1

[ 1.161726] serio: i8042 AUX port at 0x60,0x64 irq 12

[ 1.162118] mousedev: PS/2 mouse device common for all mice

[ 1.162471] rtc_cmos 00:05: RTC can wake from S4

[ 1.164190] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0

[ 1.164250] rtc0: alarms up to one year, y3k, 114 bytes nvram

[ 1.164474] device-mapper: uevent: version 1.0.3

[ 1.164689] device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised: dm-devel@redhat.com

[ 1.164898] device-mapper: multipath: version 1.2.0 loaded

[ 1.164908] device-mapper: multipath round-robin: version 1.0.0 loaded

[ 1.165115] EISA: Probing bus 0 at eisa.0

[ 1.165122] EISA: Cannot allocate resource for mainboard

[ 1.165129] Cannot allocate resource for EISA slot 1

[ 1.165134] Cannot allocate resource for EISA slot 2

[ 1.165140] Cannot allocate resource for EISA slot 3

[ 1.165146] Cannot allocate resource for EISA slot 4

[ 1.165151] Cannot allocate resource for EISA slot 5

[ 1.165157] Cannot allocate resource for EISA slot 6

[ 1.165163] Cannot allocate resource for EISA slot 7

[ 1.165168] Cannot allocate resource for EISA slot 8

[ 1.165173] EISA: Detected 0 cards.

[ 1.165518] cpuidle: using governor ladder

[ 1.165805] cpuidle: using governor menu

[ 1.166462] TCP cubic registered

[ 1.166820] NET: Registered protocol family 10

[ 1.168178] NET: Registered protocol family 17

[ 1.168229] Registering the dns_resolver key type

[ 1.168368] Using IPI No-Shortcut mode

[ 1.168677] PM: Hibernation image not present or could not be loaded.

[ 1.168705] registered taskstats version 1

[ 1.169103] Magic number: 11:768:481

[ 1.169327] rtc_cmos 00:05: setting system clock to 2011-05-21 12:27:40 UTC (1305980860)

[ 1.169335] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found

[ 1.169340] EDD information not available.

[ 1.169569] Freeing unused kernel memory: 700k freed

[ 1.170046] Write protecting the kernel text: 5192k

[ 1.170148] Write protecting the kernel read-only data: 2148k

[ 1.232355] <30>udev[69]: starting version 167

[ 1.404735] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.

[ 1.405612] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 22

[ 1.405664] forcedeth 0000:00:0a.0: PCI INT A -> Link[LMAC] -> GSI 22 (level, low) -> IRQ 22

[ 1.405683] forcedeth 0000:00:0a.0: setting latency timer to 64

[ 1.470643] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x732 @ 3, addr 00:25:22:21:c5:53

[ 1.470658] forcedeth 0000:00:0a.0: highdma csum pwrctl gbit lnktim msi desc-v3

[ 1.471169] ahci 0000:00:0b.0: version 3.0

[ 1.472065] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 21

[ 1.472116] ahci 0000:00:0b.0: PCI INT A -> Link[LSA0] -> GSI 21 (level, low) -> IRQ 21

[ 1.472237] ahci 0000:00:0b.0: irq 41 for MSI/MSI-X

[ 1.472256] ahci 0000:00:0b.0: controller can't do PMP, turning off CAP_PMP

[ 1.472425] ahci 0000:00:0b.0: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode

[ 1.472439] ahci 0000:00:0b.0: flags: 64bit ncq sntf led pio sxs

[ 1.472452] ahci 0000:00:0b.0: setting latency timer to 64

[ 1.477120] scsi0 : ahci

[ 1.477613] scsi1 : ahci

[ 1.477956] scsi2 : ahci

[ 1.478332] scsi3 : ahci

[ 1.478668] scsi4 : ahci

[ 1.479003] scsi5 : ahci

[ 1.479658] ata1: SATA max UDMA/133 abar m8192@0xfae76000 port 0xfae76100 irq 41

[ 1.479672] ata2: SATA max UDMA/133 abar m8192@0xfae76000 port 0xfae76180 irq 41

[ 1.479683] ata3: SATA max UDMA/133 abar m8192@0xfae76000 port 0xfae76200 irq 41

[ 1.479694] ata4: SATA max UDMA/133 abar m8192@0xfae76000 port 0xfae76280 irq 41

[ 1.479705] ata5: SATA max UDMA/133 abar m8192@0xfae76000 port 0xfae76300 irq 41

[ 1.479715] ata6: SATA max UDMA/133 abar m8192@0xfae76000 port 0xfae76380 irq 41

[ 1.588077] Refined TSC clocksource calibration: 1599.994 MHz.

[ 1.588088] Switching to clocksource tsc

[ 1.772040] usb 2-3: new low speed USB device using ohci_hcd and address 2

[ 1.796055] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)

[ 1.796087] ata2: SATA link down (SStatus 0 SControl 300)

[ 1.797918] ata1.00: ATA-8: OCZ-VERTEX2, 1.23, max UDMA/133

[ 1.797926] ata1.00: 117231408 sectors, multi 16: LBA48 NCQ (depth 31/32)

[ 1.800044] ata3: SATA link down (SStatus 0 SControl 300)

[ 1.800072] ata4: SATA link down (SStatus 0 SControl 300)

[ 1.800115] ata5: SATA link down (SStatus 0 SControl 300)

[ 1.800151] ata6: SATA link down (SStatus 0 SControl 300)

[ 1.807912] ata1.00: configured for UDMA/133

[ 1.808215] scsi 0:0:0:0: Direct-Access ATA OCZ-VERTEX2 1.23 PQ: 0 ANSI: 5

[ 1.808902] sd 0:0:0:0: Attached scsi generic sg0 type 0

[ 1.808947] sd 0:0:0:0: [sda] 117231408 512-byte logical blocks: (60.0 GB/55.8 GiB)

[ 1.809374] sd 0:0:0:0: [sda] Write Protect is off

[ 1.809386] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00

[ 1.809510] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA

[ 1.811128] sda: sda1 sda2 < sda5 >

[ 1.812261] sd 0:0:0:0: [sda] Attached SCSI disk

[ 1.909935] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)

[ 2.292076] usb 2-4: new full speed USB device using ohci_hcd and address 3

[ 2.332207] <30>udev[311]: starting version 167

[ 2.372531] lp: driver loaded but no devices found

[ 2.470564] i2c i2c-0: nForce2 SMBus adapter at 0x4d00

[ 2.470582] ACPI: resource nForce2_smbus [io 0x4e00-0x4e3f] conflicts with ACPI region SM00 [io 0x4e00-0x4e3f]

[ 2.470591] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver

[ 2.566547] nvidia: module license 'NVIDIA' taints kernel.

[ 2.566558] Disabling lock debugging due to kernel taint

[ 3.122315] IR NEC protocol handler initialized

[ 3.128697] IR RC5(x) protocol handler initialized

[ 3.138393] IR RC6 protocol handler initialized

[ 3.146510] IR JVC protocol handler initialized

[ 3.154842] IR Sony protocol handler initialized

[ 3.163992] lirc_dev: IR Remote Control driver registered, major 251

[ 3.164043] Registered IR keymap rc-rc6-mce

[ 3.164417] input: Media Center Ed. eHome Infrared Remote Transceiver (0471:0815) as /devices/pci0000:00/0000:00:04.0/usb2/2-4/2-4:1.0/rc/rc0/input2

[ 3.164612] rc0: Media Center Ed. eHome Infrared Remote Transceiver (0471:0815) as /devices/pci0000:00/0000:00:04.0/usb2/2-4/2-4:1.0/rc/rc0

[ 3.164784] mceusb 2-4:1.0: Registered Philips eHome Infrared Transceiver on usb2:3

[ 3.164876] usbcore: registered new interface driver mceusb

[ 3.171896] rc rc0: lirc_dev: driver ir-lirc-codec (mceusb) registered at minor = 0

[ 3.171908] IR LIRC bridge handler initialized

[ 3.800889] Adding 1832956k swap on /dev/sda5. Priority:-1 extents:1 across:1832956k SS

[ 3.808929] type=1400 audit(1305980863.135:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=435 comm="apparmor_parser"

[ 3.810151] type=1400 audit(1305980863.135:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=435 comm="apparmor_parser"

[ 3.810946] type=1400 audit(1305980863.135:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=435 comm="apparmor_parser"

[ 3.812518] type=1400 audit(1305980863.139:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=479 comm="apparmor_parser"

[ 3.815427] type=1400 audit(1305980863.139:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=479 comm="apparmor_parser"

[ 3.816329] type=1400 audit(1305980863.143:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=479 comm="apparmor_parser"

[ 4.035243] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4

[ 4.181997] usbcore: registered new interface driver usbhid

[ 4.182011] usbhid: USB HID core driver

[ 4.226564] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro

[ 4.720478] HDA Intel 0000:00:08.0: power state changed by ACPI to D0

[ 4.720497] HDA Intel 0000:00:08.0: power state changed by ACPI to D0

[ 4.721183] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 20

[ 4.721224] HDA Intel 0000:00:08.0: PCI INT A -> Link[LAZA] -> GSI 20 (level, low) -> IRQ 20

[ 4.721236] hda_intel: Disable MSI for Nvidia chipset

[ 4.721336] HDA Intel 0000:00:08.0: setting latency timer to 64

[ 5.932044] hda-codec: no NID for mapping control Independent HP:0:0

[ 6.550191] ACPI: PCI Interrupt Link [LPMU] enabled at IRQ 23

[ 6.550206] nvidia 0000:00:03.5: PCI INT B -> Link[LPMU] -> GSI 23 (level, low) -> IRQ 23

[ 6.550719] ACPI: PCI Interrupt Link [sGRU] enabled at IRQ 22

[ 6.550729] nvidia 0000:01:00.0: PCI INT A -> Link[sGRU] -> GSI 22 (level, low) -> IRQ 22

[ 6.550744] nvidia 0000:01:00.0: setting latency timer to 64

[ 6.550754] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem

[ 6.551474] NVRM: loading NVIDIA UNIX x86 Kernel Module 270.41.06 Mon Apr 18 14:54:25 PDT 2011

[ 7.654812] input: Microsft Microsoft Wireless Desktop Receiver 3.1 as /devices/pci0000:00/0000:00:04.0/usb2/2-3/2-3:1.0/input/input3

[ 7.655235] microsoft 0003:045E:00F9.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsft Microsoft Wireless Desktop Receiver 3.1] on usb-0000:00:04.0-3/input0

[ 7.673085] microsoft 0003:045E:00F9.0002: fixing up Microsoft Wireless Receiver Model 1028 report descriptor

[ 7.697061] input: Microsft Microsoft Wireless Desktop Receiver 3.1 as /devices/pci0000:00/0000:00:04.0/usb2/2-3/2-3:1.1/input/input4

[ 7.698521] microsoft 0003:045E:00F9.0002: input,hidraw1: USB HID v1.11 Mouse [Microsft Microsoft Wireless Desktop Receiver 3.1] on usb-0000:00:04.0-3/input1

[ 7.809431] vesafb: framebuffer at 0xf7000000, mapped to 0xf8300000, using 1216k, total 1216k

[ 7.809446] vesafb: mode is 640x480x32, linelength=2560, pages=0

[ 7.809453] vesafb: scrolling: redraw

[ 7.809463] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0

[ 7.809933] Console: switching to colour frame buffer device 80x30

[ 7.809990] fb0: VESA VGA frame buffer device

[ 7.842769] type=1400 audit(1305980867.167:8): apparmor="STATUS" operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" pid=742 comm="apparmor_parser"

[ 7.843112] type=1400 audit(1305980867.167:9): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=743 comm="apparmor_parser"

[ 7.844764] type=1400 audit(1305980867.171:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=743 comm="apparmor_parser"

[ 7.845554] type=1400 audit(1305980867.171:11): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=743 comm="apparmor_parser"

[ 7.867185] type=1400 audit(1305980867.191:12): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=746 comm="apparmor_parser"

[ 7.868952] type=1400 audit(1305980867.195:13): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=746 comm="apparmor_parser"

[ 7.879799] type=1400 audit(1305980867.203:14): apparmor="STATUS" operation="profile_load" name="/usr/sbin/tcpdump" pid=751 comm="apparmor_parser"

[ 7.906785] type=1400 audit(1305980867.231:15): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=744 comm="apparmor_parser"

[ 7.911233] ppdev: user-space parallel port driver

[ 7.923934] type=1400 audit(1305980867.247:16): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer" pid=744 comm="apparmor_parser"

[ 7.941624] type=1400 audit(1305980867.267:17): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-thumbnailer" pid=744 comm="apparmor_parser"

[ 8.946965] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0

[ 13.235634] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0

[ 18.592024] eth0: no IPv6 routers present

[ 944.557757] exe (15179): /proc/15179/oom_adj is deprecated, please use /proc/15179/oom_score_adj instead.

rj@rj-desktop:~$ dmesg

 

[na upgrade naar ubuntu 11.04 geen geluid meer.]

Na een upgrade van ubuntu 10.04 naar 11.04 doet mijn geluid het niet meer over HDMI.In 10.04 deed ie het perfect maar ik kan het nu niet meer aan de praat krijgen op mijn ION 330 htpc.Ook de afstand bediening (het is een mce remote van microsoft)doet het niet meer. Iemand een idee hoe ik dit weer aan de praat krijg.

 

Gr R

[Vreemd probleem LG-Nas N2B1]

Ik heb een raar probleem met mijn LG-NAS .

Als ik hem uitzet en de volgende morgen weer opstart,dan begint ie torrents te downloaden (een stuk of 5 die ik 2 maanden geleden

eens gedownload heb.Ze staan al lang niet meer op de harde schijf

in de nas en de torrents heb ik ook al allang verwijderd.

Maar elke keer begint ie weer met die torrents te downloaden.

Wie weet hoe ik dit fenomeen kan oplossen.

 

Gr

[Popcorn Hour C-200 Beta firmware]

Er is weer een nieuwe firmware voor de C-200.

 

Gr

[strepen in scherm acer laptop.]

Op mijn computerscherm doet ie het perfect,dus de video kaart is goed.Dan blijft de flatcabel of het scherm over.

 

Gr

[strepen in scherm acer laptop.]

he bedankt daar had ik nog niet aan gedacht.

Zal het vandaag eens proberen.

 

Gr