-
Items
69 -
Registratiedatum
-
Laatst bezocht
Inhoudstype
Profielen
Forums
Store
Berichten die geplaatst zijn door kersen
-
-
http://www.file-upload.net/download-1387985/TDT_rev698_mod_PKT_beta3.0.zip.html
probeer deze link maar eens.
greetz Kersen
-
waar is deze te downloaden ?
aaf site is gesloten
greetz Kersen
-
bedankt allemaal.
Het is me nu wel gelukt. Kanalen lijst via de usb werkt hier.
Soms nog een groen scherm. Hopelijk bij de volgende editie een stabielere versie.
Greetz Kersen
-
probleem is opgelost, Van de newyear editie terug gegaan naar de kerst edition. Nu werkt het perfect.
Greetz Kersen
-
Dan zal ik wel nog iets fout hebben staan in mbox of cshare, nu aleen nog uitvinden wat he.
greetz
-
ik heb idd de flash versie. Maar helaas is me tot nu toe nog steeds niet gelukt om de kanalen te uploaden.
Dus nu heb ik de procedure gevolgd van Black64, en een swap aangemaakt op de usb stick. Dit is goed verlopen. De mappen staan nu op mijn usb stick. Echter niet de map settings.
Ik heb nu de volgende mappen op de usb
emu 755 rechten
etc 755 rechten
extensions 755 rechten
fonts 755 rechten
keys 755 rechten
lib 755 rechten
picon 755 rechten
skins 755 rechten
f 36 rechten
swapfile (bestand met 755 rechten)
Moet ik de var/swap/settings/ nu zelf aanmaken of in een andere map zetten ?
greetz Kersen
-
mbox downloaden onder plugins
je mbox.cfg en cwshare aanpassen.
We will try to explain here how to start with Mbox.
You can NOT reply to this topic.
Only the moderators can add or change here.
If there is something wrong or you want to add comments, please contact one of the moderators to do this.
This topic refers always to the latest version of Mbox. (we will try to keep it updated)
Ok, here we go.
To start Mbox you need to configure mbox.cfg first.
These parameters you must set before you can start Mbox:
D: { 0 }
//D: { x }
//x=0 -> disable
//x=1 -> enable dbox2 cw writing
//x=2 -> enable STAPI for IPBOX
//x=3 -> enable STAPI for Kathrein
T: { /tmp/ }
// T option -> where to store temp files ... (share.info,debug.txt ,etc.)
// T: { folder_path_to_files, example: T: { /tmp/ } }
K: { /var/keys/ }
// K option -> where is cwshare.cfg file
// K: { folder_path_to_files, example: K: { /var/keys/ } }
P: { /tmp/pmt.tmp }
// P option -> PMT location (Dont used with linux and windows)
// you must be tuned to channel so image can generate this file
// { /tmp/pmt.tmp } for resivers and images that create this file <- use this if you can
// { 1/tmp/camd.socket } for enigma 1
// { 2/tmp/camd.socket } for enigma 2
Now for the start of Mbox you need to know where the mbox.cfg path is.
The default path for mbox.cfg is /var/keys/
For other paths you must start mbox with path as argument!!!
For some receivers like Ipbox and Kathrein there is no /var/keys/ so you must start mbox always with arguments.
Example:
without arguments
./mbox or ./var/bin/mbox
with arguments
./mbox /data/keys/mbox.cfg or ./var/bin/mbox /data/keys/mbox.cfg
To STOP Mbox you need to create mbox.kill.
Put this mbox.kill in the temp dir of Mbox. T: path (look your settings in mbox.cfg)
Example T: { /tmp/ }: touch /tmp/mbox.kill
Other parameters of mbox.cfg that are interesting:
M: { 1 }
// M option -> Mode option
// M: { x }
// x=0 -> local mode no NET
// x=1 -> NET mode
// default 0
H: { 0 }
//H option -> C line priority over network cards
// H: { x }
// x=0 -> disabled -> newtwork cards has priority over your local cards
// x=1 -> enabled -> your local cards has priority over network cards
// default disabled
Z: { 12 } { 127.0.0.1 8000 }
// Z option -> control sending/writing current informations
// Z: { xy } { IP port }
// x=0 -> don't print time stamp (in console screen and in debug file)
// x=1 -> print time stamp ( .... )
// y=0 -> no writing/sending informations to debug file/destination IP
// y=1 -> send informations to destination IP but not in debug file
// y=2 -> write informations to debug file but don't send to destination IP
// y=3 -> write/send informations to debug file/destination IP
// IP port -> destination IP and UDP port where to send informations
Only debug file: Z: { 12 } { 127.0.0.1 8000 }
only send debug to IP: Z: { 11 } { 127.0.0.1 8000 }
Both file and IP: Z: { 13 } { 127.0.0.1 8000 }
L: { 1 }
// L option -> how mbox to menage virtual card(s) with level 0
// ( only for peer(s) who have and can reshare virtual cards but don't want to use LEVEL 0 card(s) for them self)
// L: { x }
// x=0 -> don't load any virtual cards with LEVEL 0, you can't use them for your self
// x=1 -> load all virtual cards with LEVEL 0 ,you will be using them for your self
// default 1
If you run Mbox on a server then you can't use level0 cards so you have to set:
L: { 0 }
About the cwshare.cfg:
If you don't use a brascet and you must set some other options after the brascet then don't leave it empty.
Put a zero in it so Mbox knows it's not used.
Example: C: { 127.0.0.1 15000 dummy dummy 01 02 03 04 05 06 07 08 09 10 11 12 13 14 } { 0 } { 0 }
When using Mbox and Newcs on the same box/server then Mbox can see those cards as local.
But you must make a connection ( C-line in cwshare.cfg) with IP 127.0.0.1.
Only then you will have these cards as local in your Mbox server.
About D line in cwshare.cfg file ...
Now you can set what provids boxids you want to reshare with another peer(s)
This is standard D line
=======================
D: { IP { port1 port2 { pass { level1 level2 }}}}
This is my new upgraded D line
===============================
D: { IP { port1 port2 { pass { level1 level2 }}}}
{ 0000 } { 0 } send filter
{ 0000 } { 0 } receive filter
D: { IP { port1 port2 { pass { level1 level2 }}}}
{ xxyy !!in hex!!!} { provid-boxid-boxid;provid;provid-boxid; ...!!in hex!!!} send filter
{ xxyy !!in hex!!!} { provid-boxid-boxid;provid;provid-boxid; ...!!in hex!!!} receive filter
for both brascets
xx -> 00 disabled
xx -> 01 allow only this cards for provid to be reshared received
xx -> 02 denied only this cards for provid to be reshared received
yy -> how much provids is in next brascet dont caculate boxids
1st example:
============
D: { IP { port1 port2 { pass { level1 level2 }}}}
{ 0102 } { 0001006A;0001006C-0A0A-0B0B; }
{ 0102 } { 00010080;00010081-0A0A-0B0B; }
{ 0102 } { 0001006A;0001006C-0A0A-0B0B; }
xx is 01 ,ALL cards for (0001006A) provid is SENT to peer AND cards with boxid 0A0A,0B0B for provid 0001006C, ALL others provids(cards) will NOT be sent!!
yy is 02 ,there is only 2 provids in next bracket dont caculate boxids
{ 0102 } { 00010080;00010081-0A0A-0B0B; }
xx is 01 ,ALL cards for (00010080) provid is RECEIVED from peer AND cards with boxid 0A0A,0B0B for provid 00010081, ALL others provids will be IGNORED!!
yy is 02 ,there is only 2 provids in next bracket dont caculate boxids
2nd example:
============
D: { IP { port1 port2 { pass { level1 level2 }}}}
{ 0202 } { 0001006A;0001006C-0A0A-0B0B; }
{ 0202 } { 00010080;00010081-0A0A-0B0B; }
{ 0202 } { 0001006A;0001006C-0A0A-0B0B; }
xx is 02 ,ALL cards for this (0001006A) provid is NOT sent to peer AND cards with boxid 0A0A,0B0B for provid 0001006C, ALL others provids(cards) are !!
yy is 02 ,there is only 2 provids in next bracket dont caculate boxids
{ 0202 } { 00010080;00010081-0A0A-0B0B; }
xx is 02 ,ALL cards for (00010080) provid is NOT RECEIVED from peer AND cards with boxid 0A0A,0B0B for provid 00010081, all others provids will be received!!
yy is 02 ,there is only 2 provids in next bracket dont caculate boxids
NOTICE: MBOX WILL NOT COMPLAIN IF YOU USE OLD D LINE STYLE !!!!!!!!!!!!!
Connecting to newcamd server program Newcs
==========================================
example:
C: { server_ip server_listening_port username password des_key } { x } { xxxxyyyyxxxyyyy;......}
C: { 127.0.0.1 15000 dummy dummy 01 02 03 04 05 06 07 08 09 10 11 12 13 14 } { 10 } { 0100006a:0100006B;}
[second brascet] -> { x } max. number ecms in buffer ,decimal !!!!!
[third brascet] { 0100006a:0100006B;} is used if you want to change caidprovid from what newcs detected to caidprovid to use with gboxx protocol so 0100006A will be 0100006B in gboxx protocol
Resending ECM(s) on timeout interval
====================================
O: { xxxx yyyy }
example:
O: { 4000 2000 }
4000 (4 seconds)-> resend current ecm on boxid if no dcw
2000 (2 seconds)-> wait 2 more seconds for dcw ,if no dcw on time resend ecm(s) to all boxid's
NDS system ->Resending ECM(s) on timeout interval
=================================================
N: { xxxx yyyy }
example:
N: { 400 200 }
default disabled...
Add more cards for CaidProvid
=============================
X+: { xxxxyyyy:zz;xxxxyyyy:zz; } // zz -> max. is 30 !!!!!
example:
X+: { 0100006A:15; }
With X+ active, for caidprovid:0100006A max. cards for use is 15.
About the 12000.list or the port.list:
You don't need the 12000.list file to run Mbox!!! Only if you want to use the forbidden/allow SIDs.
Now you must make file called "port.list" in K: path (look your settings in mbox.cfg)
"Port" is newcs listening port,so if newcs is listening on port 12000 ,file will be called 12000.list.
Pls use SID pids , CHIDs for Irdeto or G line, because now mbox send only one ECM and wait response from newcs before it send new ECM.
//this is for forbiden SID pids or Irdeto chids ..
//example
SF: { 04A0 } -> forbiden SID pid -> your card cant decrypt this channel
SF: { 0220 }
IF: { 0203 } -> forbiden Irdeto ChID -> your card cant decrypt this ChID
IF: { 0302 }
G: { 0100006A } -> dont list and reshare this provid from your card if card cant decrypt that, mbox will just flood newcs with bad ECMs for this provid.
//max forbiden SID pids or ChIDs is 150.
//max G lines is 15.
//OR to enable SID pids or Irdeto chids
//example
SA: { 04A0 } -> enable SID pid -> your card can decrypt this channel
SA: { 0220 }
IA: { 0203 } -> enable Irdeto ChID -> your card can decrypt this ChID
IA: { 0302 }
G: { 0100006A } -> dont list and reshare this provid from your card if card cant decrypt that, mbox will just flood newcs with bad ECMs for this provid.
//NOTE: YOU CANT MIX FORBIDEN AND ENABLED PIDS.
About the add.data file:
You don't need the add.data file to run Mbox!!!
The add.data file gives you the option to:
- change I,X,O,N line
- to delete running D line
- to add new D line(without filter rules)
- to resend "R" hello msg to all peers while mbox is running.
Write new values in "add.data" file and put it in folder from P: line. (look your settings in mbox.cfg)
NOTE: Max time to wait before changes take affect is 2 minutes, new values for I,X,O,N will NOT be saved in cwshare.cfg but new D or C line will be saved.
"add.data" file will be deleted after reading (read add.data.example) !
#D: { ip { port1 port2 { pass { level1 level 2 }}}} -> remove running D line
D: { ip { port1 port2 { pass { level1 level 2 }}}} -> add new D line without restarting mbox,new D line will be saved in cwshare.cfg
R ->Resend hello msg to all peers
X: { x } -> Change running X value
I: { x } -> Change running I value
O: { xxxx yyyy } -> Change running timeout intervals
N: { xxxx yyyy } -> Change running timeout intervals for NDS system
C: { server_ip server_listening_port username password des_key } { x } { xxxxyyyyxxxyyyy;......} -> add new C line
hopelijk heb je hier iets aan.
greetz
-
Wederom bedankt Paulci
ik ga er mee aan de slag
greetz
Geweldig hij laad de kanalen nu erin, maar alle favoriten zijn gewist ?
en nu ??? , een andere kanalen lijst proberen ??
greetz
-
en zo leren we iedere dag weer wat bij van elkaar. Thanls
weet je ook de preciese directory voor
service en bouqets bestanden
gebruikers bouqets bestanden
satellites.xml bestand
-
Met de originele firmware kon ik gemakkelijk de kanalenlijst update. Nu heb ik de newyear edition erop staan (enigma2), en krijg ik met geen mogelijkheid meer een nieuwe aangepaste kanalenlijst in mijn katy.
Verschillende opties en kanalenlijsten gebruikt (ook die van satman enigma2 lijst)
De volgende error krijg ik vaak in beeld
the remote server returned an error (550) file unavaiable (e.g) file not found, no acces)
Ik kan niet uploaden of downloaden (zowel in xp als in vista)
Wie kan me verder helpen ??
greetz Kersen
-
Met jullie hulp heb ik nu eindelijk mbox goed lopen op mijn kathrein.
Maar is het zo dat mbox maar 1 kanaal tegelijk kan coderen.
Het duurt namelijk er lang voordat ik beeld krijg op de gecodeerde kanalen. Op de fta kanalen heb ik gewoon een snelle zap snelheid.
Greetz Kersen
-
probleem is gelukkig opgelost. Is nu rechtstreeks verbonden met mijn dm. Het probleem zat denk ik toch in de poorten van de router.
Bedankt allemaal voor jullie hulp.
greetz Kersen
-
Ik zelf ben ook nog jong in de ervaringen van de kathrein.
En volgens mij kan de kathrein maar slecht 4 satelieten op dit moment aan. Canaal digitaal is ook met emuleren te ontvangen.(enige linux kennis vereist).Dit kan b.v. met mbox en sharing over het internet. Een handleiding zit vaak bij de betrefende image wat je erop wil zetten. Een originele handleiding kan je vinden op de duitse internet site. En met google kan je ook de engelse vertaling ervan vinden. Hieronder alvast de engelse handleiding van de originele ufs910
http://www.kathrein.de/en/sat/products/doc/9363095b.pdf
greetz Kersen
-
bedankt voor jullie antwoorden.
Ik begrijp dat ik met kbox of mbox eerst naar mijn pc moet sharen ? en ook met mijn db een map moet gaan aanmaken om te kunnen sharen van mijn db naar kathi ?
Is het niet mogelijk om rechtstreeks met kbox of mbox te connecten met mijn gbox server op mijn db ?
Ik heb 2 accounts lopen van no-ip.com
die van mijn db b.v (box1.no-ip.biz)
kathi (box2.no-ip.biz)
Maar ik kan ze niet met elkaar verbinden.
greetz
-
beste satmann
Bedankt voor je reactie. Dit is allemaal goed ingeteld.
Ik had dit ook al ondekt. Maar nog steeds blijkt er ergens nog iets fout te gaan.
De volgende melding is nog steeds van kracht in het menu netwerk test
lan (adapter integrated ethernet)
local (disconnected)
dhcp (disabled)
ip adress (confirmed)
nameserver (uncomfirmed)
vooral dat hij niet local ziet vind ik erg vreemd.
Met telnet en ftp kom ik wel op de box, en ik ben blij dat ik nu weet dat webif niet aanwezig is bij de de flash versie.
Verbinden naar mijn dreambox lukt mij nu ook niet, maar als ik inlog op kathrein kan ik wel pingen naar mijn dreambox, en anders om lukt mij ook. Ik gebruik trouwens kbox om te verbinden met gbox.
Ik snap er niets meer van.
help help help please
greetz Kersen
-
sorry je hebt gelijk.
Dit is echter een tik foutje van mij.
Mijn gate-way staat nu al op 192.168.1.254
Dit heb ik trouwens gewoon serieel kunnen doen met kcc
wat zou het dan kunnen zijn ??
-
Ik krijg het echt niet voor elkaar om mijn netwerk goed te laten lopen.
Ik gebruik nu image AAF NEW YEAR PACKAGE 2009, maar kan dus niet op web interface komen met b.v 192.168.1.66
mijn huidige instellingen zijn
ip katy : 192.168.1.66
ip rouet : 192.168.1.254
tcp 21 en 80
udp 8004
instellinegn in netwerk settings katy zijn
use interface yes
use dhcp mo
ip adress 192.168.1.66
netmask 255.255.255.0
use a gateway yes
gateway 192.168.1.66
primary dns 192.168.1.254
secondary dns 0.0.0.0
dan de netwerk test in katy geeft.
lan adapter integrated ethernet
local disconnected
dhcp disabled
ip adress confirmed
nameserver uncomfirmed
ik ben een newbie op gebied van de kathrein
wie zou me verder kunnen helpen please.
greetz kersen
TDT rev 698 mod PKT beta 3.0
in Overige merken
Geplaatst:
weet iemand of er ook een flash versie bestaat van deze release.
Ik heb de usb versie`s nog nooit aan de praat gekregen hier.
Of is er een mogelijkheid om de ze tar om te zetten naar een flash ?
greetz Kersen