[sasc-ng hulp gezocht (core dump)]

Lamko,

 

Ik heb versie 4495 van oscam geinstalleerd. Hij connect wel maar er gebeurd verder weinig en na enige tijd disconnect hij. Enig idee wat er verkeerd zou kunnen zijn? Ik heb de volgende configuratie:

 

 

global]

logfile = stdout

fallbacktimeout = 2500

cachedelay = 1

clientdyndns = 1

unlockparental = 1

nice = -1

preferlocalcards = 1

saveinithistory = 1

 

[newcamd]

port = 34000@0100:00006A

key = 0102030405060708091011121314

allowed = 127.0.0.1,192.168.0.0-192.168.255.255,xxx.xxx.0.0-xxx.xxx.255.255

keepalive = 1

mgclient = 0

 

[dvbapi]

enabled = 1

au = 1

boxtype = AZBox

user = local

ignore = 0622

pmt_mode = 0

 

[cccam]

port = 12001

reshare = 5

ignorereshare = 0

version = 2.1.4

updateinterval = 240

minimizecards = 0

keepconnected = 1

 

[webif]

httpport = 81

httprefresh = 5

httpallowed = 192.168.0.1-192.168.255.255

httphideidleclients = 0

httpreadonly = 0

httpsavefullcfg = 0

 

[reader]

label = canaldigitaal

enable = 1

protocol = mouse

device = /dev/ttyUSB0

services = canalnl,!canalnl

caid = 0100

detect = cd

mhz = 357

cardmhz = 357

ident = 0100:00006A,00006B,00006C,00006D

group = 1

emmcache = 1,3,2

lb_weight = 100

auprovid = 00006A

 

[account]

user = user1

pwd = password1

group = 1

monlevel = 2

au = canaldigitaal

services = myservices

caid = 0100

ident = 0100:00006A

keepalive = 0

 

[account]

user = user2

pwd = password2

group = 1

monlevel = 2

au = canaldigitaal

services = myservices

caid = 0100

ident = 0100:00006A

keepalive = 0

 

dit zijn de logs:

Code:

# ./sasc-ng --cam-budget -j 0:1 --cam-dir /usr/local/etc/Mar 16 10:04:58.593 : Version: 0.0.2-61975953edd0+Mar 16 10:04:58.593 CAM: initializing plugin: SoftCam (1.0.0pre-HG-61975953edd0+): A software emulated CAMMar 16 10:04:58.593 CAM(general.info): SC version 1.0.0pre-HG-61975953edd0+ initializing (VDR 1.6.0)Mar 16 10:04:58.593 CAM: starting plugin:Mar 16 10:04:58.593 CAM(general.info): SC version 1.0.0pre-HG-61975953edd0+ starting (VDR 1.6.0)Mar 16 10:04:58.594 CAM(core.load): ** Plugin config:Mar 16 10:04:58.594 CAM(core.load): ** Key updates (AU) are enabled (active CAIDs) (no prestart)Mar 16 10:04:58.594 CAM(core.load): ** Local systems DON'T take priority over cached remoteMar 16 10:04:58.594 CAM(core.load): ** Concurrent FF recordings are NOT allowedMar 16 10:04:58.594 CAM(core.load): ** Force transfermode with digital audioMar 16 10:04:58.594 CAM(core.load): ** ECM cache is set to enabledMar 16 10:04:58.594 CAM(core.load): ** ScCaps are 1 2 0 0 0 0 0 0 0 0Mar 16 10:04:58.594 CAM(general.info): loading cardclient config from /usr/local/etc//cardclient.confMar 16 10:04:58.594 CAM(cardclient.newcamd): now using protocol version 525 (cdLen=8)Mar 16 10:04:58.594 CAM(cardclient.core): hostname=XXX.XXX.XXX.XXX port=34000 emm=1 emmCaids 0000/0000Mar 16 10:04:58.594 CAM(cardclient.core): Newcamd: username=user2 password=password2 key=0102030405060708091011121314Mar 16 10:04:58.594 CAM(cardclient.core): client 'Newcamd' readyMar 16 10:04:58.596 CAM(core.net): connecting to XXX.XXX.XXX.XXX:34000/tcp (XXX.XXX.XXX.XXX)Mar 16 10:04:58.700 CAM(cardclient.login): Newcamd: CaID=0100 admin=1 srvUA=00000000XXXXXXXX provider 00006A/0000000000XXXXXX 000000/00000000XXXAXXAXMar 16 10:04:58.700 CAM(general.error): failed open /usr/local/etc//SoftCam.Key: No such file or directoryMar 16 10:04:58.700 CAM(general.error): failed open /usr/local/etc//smartcard.conf: No such file or directoryMar 16 10:04:58.700 CAM(general.error): failed open /usr/local/etc//cardslot.conf: No such file or directoryMar 16 10:04:58.700 CAM(general.error): failed open /usr/local/etc//override.conf: No such file or directoryMar 16 10:04:58.700 CAM(general.error): no keys loaded for softcam!Mar 16 10:04:58.700 CAM(core.load): ** registered systems:Mar 16 10:04:58.700 CAM(core.load): ** Cardclient        (pri -15)Mar 16 10:04:58.700 CAM(core.load): ** Conax             (pri -10)Mar 16 10:04:58.700 CAM(core.load): ** ConstCW           (pri -20)Mar 16 10:04:58.701 CAM(core.load): ** Cryptoworks       (pri -10)Mar 16 10:04:58.701 CAM(core.load): ** Irdeto            (pri -10)Mar 16 10:04:58.701 CAM(core.load): ** Irdeto2           (pri  -8)Mar 16 10:04:58.701 CAM(core.load): ** Nagra             (pri -10)Mar 16 10:04:58.701 CAM(core.load): ** Nagra2            (pri -10)Mar 16 10:04:58.701 CAM(core.load): ** Fake-NDS          (pri -12)Mar 16 10:04:58.701 CAM(core.load): ** SC-Conax          (pri  -5)Mar 16 10:04:58.701 CAM(core.load): ** SC-Cryptoworks    (pri  -5)Mar 16 10:04:58.701 CAM(core.load): ** SC-Irdeto         (pri  -5)Mar 16 10:04:58.701 CAM(core.load): ** SC-Nagra          (pri  -5)Mar 16 10:04:58.701 CAM(core.load): ** SC-Seca           (pri  -5)Mar 16 10:04:58.701 CAM(core.load): ** SC-Viaccess       (pri  -5)Mar 16 10:04:58.701 CAM(core.load): ** SC-VideoGuard2    (pri  -5)Mar 16 10:04:58.701 CAM(core.load): ** Seca              (pri -10)Mar 16 10:04:58.701 CAM(core.load): ** @SHL              (pri -10)Mar 16 10:04:58.701 CAM(core.load): ** Viaccess          (pri -10)Mar 16 10:04:59.707 demux: Starting thread on /dev/dvb/adapter1/demux1The thread scheduling parameters indicate:policy = 0priority = 0Mar 16 10:04:59.707 frontend: Starting thread on /dev/dvb/adapter1/frontend1The thread scheduling parameters indicate:policy = 0priority = 0Mar 16 10:04:59.707 dvr: Starting thread on /dev/dvb/adapter1/dvr1The thread scheduling parameters indicate:policy = 1priority = 99Mar 16 10:04:59.708 : Listening on port 5456Buffer has room, reading 2068 bytesReturning 2048Buffer has room, reading 2068 bytesReturning 2048Buffer has room, reading 2068 bytesReturning 2048Buffer has room, reading 2068 bytesReturning 2048Buffer has room, reading 2068 bytesReturning 2048Buffer has room, reading 2068 bytesReturning 2048Buffer has room, reading 2068 bytesReturning 2048Buffer has room, reading 2068 bytesReturning 2048Buffer has room, reading 2068 bytesReturning 2048Buffer has room, reading 2068 bytesReturning 2048Buffer has room, reading 2068 bytesReturning 2048Buffer has room, reading 2068 bytesReturning 2048Buffer has room, reading 2068 bytesReturning 2048Buffer has room, reading 2068 bytesReturning 2048Buffer has room, reading 2068 bytesReturning 2048Buffer has room, reading 2068 bytesReturning 2048Buffer has room, reading 2068 bytesReturning 2048Buffer has room, reading 2068 bytesReturning 2048Mar 16 10:06:59.632 CAM(core.net): idle timeout, disconnected XXX.XXX.XXX.XXX:34000

 

 

 

Code:

$ ./oscam -c ~/conf/Warning: keyword 'clientdyndns' in global section not recognizedOSCam compiled without DVB API support. Parameter enabled ignoredOSCam compiled without DVB API support. Parameter au ignoredOSCam compiled without DVB API support. Parameter boxtype ignoredOSCam compiled without DVB API support. Parameter user ignoredOSCam compiled without DVB API support. Parameter ignore ignoredOSCam compiled without DVB API support. Parameter pmt_mode ignored2011/03/16 10:04:42 B75376C0 s >> OSCam <<  cardserver started version 1.00-unstable_svn, build #4495 (i686-pc-linux)2011/03/16 10:04:42 B75376C0 s version=1.00-unstable_svn, build #4495, system=i686-pc-linux, nice=-12011/03/16 10:04:42 B75376C0 s client max. idle=120 sec, debug level=02011/03/16 10:04:42 B75376C0 s max. logsize=unlimited2011/03/16 10:04:42 B75376C0 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=1 ms2011/03/16 10:04:42 B75376C0 s auth size=49682011/03/16 10:04:42 B75376C0 s Cannot open file "/home/jchaarman/conf//oscam.services" (errno=2)2011/03/16 10:04:42 B75376C0 s userdb reloaded: 2 accounts loaded, 0 expired, 0 disabled2011/03/16 10:04:42 B75376C0 s signal handling initialized (type=sysv)2011/03/16 10:04:42 B75376C0 s can't open file "/home/jchaarman/conf//oscam.srvid" (err=2), no service-id's loaded2011/03/16 10:04:42 B75376C0 s can't open file "/home/jchaarman/conf//oscam.tiers" (err=2), no tier-id's loaded2011/03/16 10:04:42 B75376C0 s can't open file "/home/jchaarman/conf//oscam.provid" (err=2), no provids's loaded2011/03/16 10:04:42 B75376C0 s can't open file "/home/jchaarman/conf//oscam.ird" (errno=2) irdeto guessing not loaded2011/03/16 10:04:42 B75376C0 s monitor: disabled2011/03/16 10:04:42 B75376C0 s camd33: disabled2011/03/16 10:04:42 B75376C0 s camd35: disabled2011/03/16 10:04:42 B75376C0 s cs378x: disabled2011/03/16 10:04:42 B75376C0 s newcamd: initialized (fd=6, port=34000, crypted)2011/03/16 10:04:42 B75376C0 s CAID: 01002011/03/16 10:04:42 B75376C0 s provid #0: 00006A2011/03/16 10:04:42 B75376C0 s cccam: initialized (fd=7, port=12001, crypted)2011/03/16 10:04:42 B75376C0 s radegast: disabled2011/03/16 10:04:42 B75376C0 s http thread started2011/03/16 10:04:42 B75376C0 s creating thread for device /dev/ttyUSB02011/03/16 10:04:42 B7503280 h HTTP Server couldn't bind on port 81 (errno=13). Not starting HTTP!2011/03/16 10:04:42 B75376C0 s loadbalancer: can't read from file /tmp/.oscam/stat2011/03/16 10:04:42 B75376C0 s waiting for local card init2011/03/16 10:04:42 B74EA280 r reader thread started (thread=B74EA280, label=canaldigitaal, device=/dev/ttyUSB0, detect=cd, mhz=357, cardmhz=357)2011/03/16 10:04:44 B74EA280 r canaldigitaal card detected2011/03/16 10:04:49 B74EA280 r ATR: XX XX 11 00 01 40 96 70 70 0A 0E 6C XX XX 2011/03/16 10:04:50 B74EA280 r Maximum frequency for this card is formally 5 Mhz, clocking it to 3.57 Mhz2011/03/16 10:04:51 B74EA280 r type: SECA, caid: 0100, serial: XXXXXXXXX, card: Canal+ NL v10.02011/03/16 10:04:52 B74EA280 r [seca-reader] provider: 1, valid: 1, name: MANAGMENT, expiry date: 2011/05/102011/03/16 10:04:52 B74EA280 r [seca-reader] SA: XXXAXXAX2011/03/16 10:04:52 B74EA280 r [seca-reader] provider: 2, valid: 1, name: CANALDIGITAAL, expiry date: 2011/05/042011/03/16 10:04:52 B74EA280 r [seca-reader] SA: 00XXXXXX2011/03/16 10:04:52 B74EA280 r providers: 2 (0000,006A)2011/03/16 10:04:52 B74EA280 r [seca-reader] Using PIN 0000!2011/03/16 10:04:52 B74EA280 r [seca-reader] Can't disable parental lock. Wrong PIN? OSCam used 0000!2011/03/16 10:04:52 B74EA280 r [seca-reader] ready for requests2011/03/16 10:04:52 B74EA280 r found cardsystem2011/03/16 10:04:52 B74EA280 r [seca-reader] no PBM for provider 12011/03/16 10:04:52 B74EA280 r [seca-reader] PBM for provider 2: C2000000000000002011/03/16 10:04:52 B75376C0 s init for all local cards done2011/03/16 10:04:52 B75376C0 s anti cascading disabled2011/03/16 10:04:58 B7503280 c client connected to 34000 port2011/03/16 10:04:58 B7503280 c encrypted newcamd:34000-client XXX.XXX.XXX.XXX granted (user2, au=canaldigitaal)2011/03/16 10:04:58 B7503280 c user user2 authenticated successfully (generic)2011/03/16 10:04:58 B7503280 c AU enabled for user user2 on reader canaldigitaal2011/03/16 10:06:58 B7503280 c user2 disconnected  from XXX.XXX.XXX.XXX2011/03/16 10:06:58 B7503280 c thread B7503280 ended!

 

[sasc-ng hulp gezocht (core dump)]

Dank voor je snelle reactie

 

de TechnoTrend TT-connect S2-3650 CI ( http://linuxtv.org/wiki/index.php/TechnoTrend_TT-connect_S2-3650_CI )

 

Ik heb sasc-ng opnieuw gerecompiled zonder opties ( ./configure --dvb-dir=~/3650/s2-liplianin ) en nu start hij en kan ik de fta via sasc kijken.

 

Heb jij een suggestie over hoe ik kan testen hoe geencrypte kanalen werken?

 

 

[sasc-ng hulp gezocht (core dump)]

Ik heb de S2API drivers gecompiled op Kubuntu 1004 en krijg met szap & mplayer beeld. De sasc dvbloopback module en sasc-ng zelf (hg clone http://85.17.209.13:6100/sc) compilen maar bij het starten van sasc-ng krijg ik een coredump:

 

# ./sasc-ng --cam-budget -j 0:1

Mar 14 21:43:28.410 : Version: 0.0.2-61975953edd0+

Segmentation fault (core dumped)

 

In dmesg staat het volgende:

 

[ 5673.598290] DVB: registering new adapter (DVB-LOOPBACK)

[ 7144.034927] sasc-ng[20043]: segfault at 0 ip b7726e58 sp bfd7cb90 error 4 in libvdr-sc.so[b7708000+5a000]

 

Iemand een suggestie?

 

thx!