hn err

[Gast]

Hallo tijdens het patchen krijg ik steeds hnerr

Ik heb al diverse loaders geprobeerd maar het wil niet lukken!

Wanneer ik mijn humax5400 aanzet staat er h206 op het display maar in mijn status menu staat er h208 (dus gepatch).

Waar ligt het nu aan mijn loader? software ik heb winoak en hcc gebruikt.

Je ziet het ik kom er niet uit.

Wie kan mij helpen?

[Gast]

Hoi,

 

Hier is een error lijst.

Ik denk dat je de restore software van Teebee eens moet draaien, deze staat bij Humaxsupport.

 

Hoe dit precies werkt weet ik niet, maar in de info file staat dat het je humax weer kan herstellen.

 

Succes Fred. <img border="0" title="" alt="[Knipoog]" src="images/icons/wink.gif" />

 

HUMAX FIRMWARE

Download error Message and remedy

 

When you have any problem during downloading,you may see one of the following error code at the front panel display.

 

Error Code Meaning Remedy

E-HC/bC Incorrect header block(CRC-16) The software seems damaged while you receive from web site or e-mail.

Pls receive the software again and try to download

 

E-dC Incorrect data block(CRC-16) The software seems damaged while you receive from web site or e-mail.

Pls receive the software again and try to download

 

E-Hn/bF Invalid HDF version This error can be occured when you attempt to download Non-Superset STB software to Superset or Vice-Versa.Pls check the STB model and the software

 

E-Id Invalid system ID This error can be occured when you attempt to download F1 software to F1-CI. Pls check the STB model and the software

 

E-AC Incorrect application CRC-32 Download latest version of application S/W

 

E-ut UART RX/TX time out There is communication problem between source and target

 

1) Check whether the S/W is compressed or not and Check whether you use the proper download tool for the software

2) Reduce the download speed and try to download again

3) STB main power Off/On and try to download again

4) Reset the PC and try to download again

 

E-Ad Invalid address Humax made the hdf file with wrong address.Pls notify this error to us and wait until we release the proper software.

 

E-Ao Invalid offset address for upload(Odd offset) There was a mistake when we made hdf file from binary file.Pls let us know immediately and wait new release version

 

E-Ft Flash program time out The flash memory in STB seems damaged. Pls try to download one more time. If you fail agian,send us back to replace the flash memory device

 

E-It/Et EEPROM program time out The EEPROM in STB seems damaged.Pls try to download one more time.

If you fail again,replace the EEPROM device

 

E-FE Fail compare after flash write Flash memory is damaged.Return the main board(CPU Board)

E-HF Invalid HDF Format Humax made the hdf file with wrong version. Pls notify this error to us and wait until we release proper software

 

E-Fn Invalid flash device Flash memory is defected Need to change the flash memory so Pls return the Main Board

 

E-AS Incorrect application size Check the software version and STB hardware specification

Red banner error Message

 

These codes may appear on your screen in a red message banner. It displays the so called CAID used by the specific channel and can mean that you don't have legal rights to view this channel.

 

0100 Seca

0500 Viaccess

0602 Irdeto

0604 Nova (with Irdeto 2)

0604 also Zee TV

1702 PW Sat

1722 PW und MV Kabel (Betacrypt)

1762 ORF und PW Östereich (Betacrypt)

[Gast]

Hallo bedankt maar ik kan de firmware van teebee nergens vinden weet je nog waar die moet staan?

[Gast]

Hoi,

 

Bij Humaxsupport en satcity staat de file.

 

Goed lezen....

 

Succes Fred.

[Gast]

Ja het werkt ik had dus de betreffende files nodig tof en erg bedankt