Ga naar inhoud


Probleem met DVB-C met nftytool, newCS en sasc-ng

Gast Frans G.

Door Gast Frans G.
in Mediaspelers (hard- en software)

 Delen

Aanbevolen berichten

walinsky Vaker hier

walinsky

Geplaatst:
Geplaatst:

Loki,

 

je gebruikt exact dezelfde configuratie als wanneer je een dbox/dreambox als client zou hebben. Je newcs server mag natuurlijk ook gewoon op een dreambox draaien. Hier draait newcs 1.30 op een linux doos met een dreambox als client, en een mythtv (sasc-ng) client.

Er zijn hier genoeg topics te vinden waar een goede newcs config (met camkey/data) genoemd worden.

Link naar reactie
Delen op andere sites

Gast Frans G.

Gast Frans G.

Geplaatst:
Geplaatst:

Betreffende ongecodeerde zenders: wat ArChie zegt klopt precies. In MythTV kan ik de ongecodeerde zenders prima zien en opnemen. Het probleem zit echt in het decoderen.

 

Ik heb in mijn /var/log/messages wel de nodige bijzondere meldingen gevonden.

 

Om te beginnen staan er tientallen meldingen van dit soort. Voor mij niet bijster informatief. Is er iemand die dit kan duiden:

 

Code:
 Aug 21 09:15:49 suseopzolder kernel: 67440737095490394 != 184467440737490394 != 184467440737490394 != 184467440737095490394 != 1844674407370490394 != 184467440737095490394 != 184467440737095490394 != 1844674407370490394 != 184467440737095490394 != 1844674407370490394 != 18446744073490394 != 184467440737095490394 != 18446744073709551615)Aug 21 09:15:49 suseopzolder kernel: dvbloopback: Got wrong response (3226490394 != 18446744073709551615)Aug 21 09:16:00 suseopzolder kernel:last message repeated 2 timesAug 21 09:15:49 suseopzolder kernel: <490394 != 18446744073709490394 != 18446744073490394 != 1844674407370490394 != 184467440737095490394 != 1844674407370490394 != 184467440737095490394 != 184467440737095490394 != 1844674407370490394 != 184467440737095490394 != 1844674407370490394 != 18446744073490394 != 184467440737095490394 != 184467440737095490394 != 1844674407370490394 != 184467440737095490394 != 184467440737095490394 != 1844674407370490394 != 1844674407370490394 != 1844674407370490394 != 1844674407370490394 != 184467440737095490394 != 184467440737095490394 != 1844674407370490394 != 184467440737095490394 != 184467440737095490394 != 184467440490394 != 1844674407370490394 != 184467440737095490394 != 1844674407370490394 != 184467440737095490394 != 184467440737095490394 != 18446744073704490394 != 1844674407370955490394 != 184467440737095490394 != 18446744073704903490394 != 1844674407370955490394 != 184467440737095490394 != 184467440737095490394 != 1844674407370490394 != 184467440737095490394 != 1844674407370490394 != 184Aug 21 09:15:49 suseopzolder kernel: 67440737095490394 != 18446744073709490394 != 18446744073709490394 != 184467440737095490394 != 18446744073490394 != 18446744073490394 != 1844674407370955490394 != 18446744073709490394 != 18446744073709490394 != 1844674407370955490394 != 18446744073709490394 != 18446744073709490394 != 1844674407370490394 != 1844674407370490394 != 18446744073709490394 != 1844674407370955490394 != 18446744073709490394 != 18446744073709490394 != 1844674407370955490394 != 18446744073709490394 != 18446744073490394 != 184467440737490394 != 18446744073709490394 != 18446744073709490394 != 1844674407370955490394 != 18446744073709490394 != 18446744073709490394 != 184467440737095490394 != 18446744073490394 != 18446744073490394 != 1844674407370955490394 != 18446744073709490394 != 18446744073709490394 != 1844674407370955490394 != 18446744073709490394 != 18446744073709490394 != 1844674407370490394 != 1844674407490394 != 18446744073709490394 != 1844674407370955490394 != 18446744073709490394 != 18446744073709490394 !=

 

Vervolgens kom ik de volgende meldingen tegen:

Code:
Aug 21 09:53:46 suseopzolder sasc-ng: [16949] [general.info] SC version 0.8.7-Unknown initializingAug 21 09:53:46 suseopzolder sasc-ng: [16949] [general.info] SC version 0.8.7-Unknown startingAug 21 09:53:46 suseopzolder sasc-ng: [16949] [general.error] Failed to open file './sc_files/SoftCam.Key': No such file or directoryAug 21 09:53:46 suseopzolder sasc-ng: [16949] [general.error] no keys loaded for softcam!Aug 21 09:53:46 suseopzolder sasc-ng: [16949] [general.info] loading cardclient config from ./sc_files/cardclient.confAug 21 09:53:46 suseopzolder sasc-ng: [16949] [general.info] loading ca cache from ./sc_files/ca.cacheAug 21 09:53:46 suseopzolder sasc-ng: [16949] [general.warn] no smartcard interface defined!Aug 21 09:55:15 suseopzolder kernel: /root/dtv/aug2008/open-sasc-ng/fixes/open-sasc-ng/dvbloopback/module/dvb_loopback.c: Unregistering ca loopback devices

 

Mijn opmerkingen:

- Het versienummer van de sc-plugin is 0.8.7-Unknown. Vreemd, maar volgens mij geen probleem.

- Ik heb geen SoftCam.Key bestand, want ik lees de keys van de newCS-server. Dat klopt toch, of heb ik wel zo'n bestand nodig?

- De melding

Code:
 [general.warn] no smartcard interface defined!

vind ik vreemd. Is dat normaal? Is er iemand die dit werkend heeft en ook deze melding krijgt? Of moet ik hier iets aan doen?

 

Tot zover weer even.

 

Dank alvast voor jullie hulp!

Link naar reactie
Delen op andere sites
walinsky Vaker hier

walinsky

Geplaatst:
Geplaatst:

Frans,

 

om zeker te zijn dat je geen onnodige waarschuwingen krijgt, kun je er voor kiezen om de gevraagde bestanden te 'touch'en;

Ird-Beta.KID

Seca.KID

smartcard.conf

SoftCam.Key

Viaccess.KID

(dit als antwoord op je vraag over je SoftCam.Key bestand)

want je leest inderdaad de keys van de newCS-server.

 

 

... overigens; verifieer even het volgende (ik heb toevallig vandaag mijn newcs van 1.3 naar 1.62 geupgrade)

- heb je al eens gekeken of je sasc client een valide login krijgt op je newcs server ? (newcs ziet hem als vdr-sc)

- hoe staat je <listening-ip /> (als deze op 127.0.0.1 staat - zal je softcam daar ook moeten connecten; omdat ik zowel met myth als met een dreambox mijn kaart gebruik, moet ik daar een 192.168.###.### adres gebruiken)

 

Link naar reactie
Delen op andere sites
Gast Frans G.

Gast Frans G.

Geplaatst:
Geplaatst:

Dank voor je suggesties; ik heb het geprobeerd. Hier mijn ervaringen.

 

- Ik krijg nu minder foutmeldingen op niet-bestaande bestanden. Dat is mooi. De melding 'no smartcard interface defined' blijft helaas wel.

- Ik weet zeker dat sasc goed contact heeft met de newcs-server via het newcamd-protocol. Ik heb twee stukken logfile aan deze post gehangen. In die van newCS kun je zien dat er af en toe een ECM OK message terug gaat naar sasc-ng. Dat zie ik bij bepaalde zenders, terwijl andere een NOT OK geven. Ik concentreer me nu eerst maar even op de zenders waar ik een OK langs zie komen. In het log van sasc-ng zie ik geen duidelijke foutmeldingen. MythTV stopt met TV vertonen ('Er was een fout tijdens het vertonen van video.').

 

Hierbij de volledige logs:

 

newCS

Code:
[root@suseopzolder newcs-1.60]# ./newcs -nd -c /etc/newcs.xmlThis is NewCS 1.60 - the New CardServer by the Butter-team..Compiled on May 19 2008 at 20:58:16Reading Config file from /etc/newcs.xmlTCP-log password is enabled, set to: NewCSpwdTCP-log set to simple modelevel: normaltype: initoutput: console,tcplogger config: level 1 type 3 output 5Console log options: level 1 type 3TCP log options: level 1 type 3[ 16:57:23 ] [ Box detect ] Box type 1 (General Boxtype - PC compatible)[ 16:57:23 ] [ Config ] Value in <ipk> for device 0 (Phoenix Interface) is INVALID, skipping...[ 16:57:23 ] [ Config ] Value in <ucpk> for device 0 (Phoenix Interface) is INVALID, skipping...[ 16:57:23 ] [ Config ] Pincode for device 0 (Phoenix Interface): 0000[ 16:57:23 ] [ Config ] /dev/ttyS0 ECM priority: round[ 16:57:23 ] [ EMM Cache ] Initialising dynamic Cache[ 16:57:23 ] [ ECM Cache ] Initialising dynamic Cache[ 16:57:23 ] [ Loader ] Starting Telnet on port 1001[ 16:57:23 ] [ Loader ] Reader type 2 on node /dev/ttyS0[ 16:57:23 ] [ Phoenix ] Opening device /dev/ttyS0[ 16:57:23 ] [ Phoenix ] Setting Parity to: ODD[ 16:57:23 ] [ Phoenix ] Setting 2 Stop bits on node /dev/ttyS0[ 16:57:23 ] [ Phoenix ] Setting Baud to standard 9600[ 16:57:23 ] [ Phoenix ] Normal RESET on node /dev/ttyS0[ 16:57:25 ] [ Loader ] Unknown card[ 16:57:25 ] [ Loader ] Trying Irdeto (T=14)[ 16:57:25 ] [ Loader ] Reader type 2 on node /dev/ttyS0[ 16:57:25 ] [ Phoenix ] Opening device /dev/ttyS0[ 16:57:25 ] [ Phoenix ] Setting Parity to: ODD[ 16:57:25 ] [ Phoenix ] Setting 2 Stop bits on node /dev/ttyS0[ 16:57:25 ] [ Phoenix ] Setting Baud to custom 5713[ 16:57:25 ] [ Phoenix ] Normal RESET on node /dev/ttyS0[ 16:57:27 ] [ ATR ] T=14  1etu=175.01us  Guardtime:17etu  WWT:9600etu[ 16:57:27 ] [ ATR ] Historical bytes: I R D E T O   A C S   V 5 . 3[ 16:57:27 ] [ Loader ] Init Irdeto card[ 16:57:27 ] [ Phoenix ] Setting Parity to: NONE[ 16:57:27 ] [ Phoenix ] Setting 2 Stop bits on node /dev/ttyS0[ 16:57:27 ] [ Phoenix ] Setting Baud to custom 5713[ 16:57:30 ] [ Keyman ] Adding key 901B0B type 0 on Provider 000000 for caid 0602 ID=0[ 16:57:30 ] [ Keyman ] Adding key 4DE5D type 1 on Provider 000000 for caid 0602 ID=0[ 16:57:30 ] [ Keyman ] Skipping duplicate irdeto[ 16:57:30 ] [ Keyman ] Adding key 600 type 1 on Provider 000001 for caid 0602 ID=1[ 16:57:31 ] [ Keyman ] Skipping duplicate irdeto[ 16:57:31 ] [ Keyman ] Adding key FFFFFF type 1 on Provider 000002 for caid 0602 ID=2[ 16:57:31 ] [ Keyman ] Skipping duplicate irdeto[ 16:57:31 ] [ Keyman ] Adding key FFFFFF type 1 on Provider 000003 for caid 0602 ID=3[ 16:57:31 ] [ Loader ] Card 0602 on port /dev/ttyS0 ready[ 16:57:31 ] [ Loader ] Starting Newcamd Server on port 15000[ 16:57:31 ] [ Newcamd ] Newcamd thread Server started on port 15000[ 16:57:44 ] [ Newcamd:15000 ] User dummy logged in, client: VDR-SC[ 16:59:44 ] [ Newcamd:15000 ] User dummy logout[ 17:04:21 ] [ Newcamd:15000 ] User dummy logged in, client: VDR-SC[ 17:04:22 ] [ Newcamd ] ECM -> dummy (OK) SID 1F44[ 17:04:30 ] [ Newcamd ] ECM -> dummy (OK) SID 1F44[ 17:05:50 ] [ Newcamd ] ECM -> dummy (NOT OK) SID 0FA4[ 17:05:56 ] [ Newcamd ] ECM -> dummy (NOT OK) SID 0FA4[ 17:06:17 ] [ Newcamd ] ECM -> dummy (NOT OK) SID 0FA4[ 17:06:38 ] [ Newcamd ] ECM -> dummy (NOT OK) SID 0FA4[ 17:07:58 ] [ Newcamd ] ECM -> dummy (OK) SID 1F45[ 17:08:00 ] [ Newcamd ] ECM -> dummy (OK) SID 1F45[ 17:08:21 ] [ Newcamd ] ECM -> dummy (OK) SID 1F45[ 17:10:21 ] [ Newcamd:15000 ] User dummy logout

 

sasc-ng

 

Code:
[root@suseopzolder open-sasc-ng]# ./sasc-ng -j 0:1 --sid-fil 10 --cam-budgetAug 30 16:57:44.246 : Version: 0.0.2-13/13Aug 30 16:57:44.247 CAM: initializing plugin: SoftCam (0.8.7-Unknown): A software emulated CAMAug 30 16:57:44 [general.info] SC version 0.8.7-Unknown initializingAug 30 16:57:44.248 CAM: starting plugin:Aug 30 16:57:44 [general.info] SC version 0.8.7-Unknown startingAug 30 16:57:44 [core.load] ** Plugin config:Aug 30 16:57:44 [core.load] ** Key updates (AU) are enabled (active CAIDs) (no prestart)Aug 30 16:57:44 [core.load] ** Local systems DON'T take priority over cached remoteAug 30 16:57:44 [core.load] ** Concurrent FF recordings are NOT allowedAug 30 16:57:44 [core.load] ** Force transfermode with digital audioAug 30 16:57:44 [core.load] ** ScCaps are 1 2 0 0 0 0 0 0 0 0Aug 30 16:57:44 [core.load] ** Ignored CAIDs 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000Aug 30 16:57:44 [general.info] loading keys from ./sc_files/SoftCam.KeyAug 30 16:57:44 [core.load] loaded 0 keys from ./sc_files/SoftCam.KeyAug 30 16:57:44 [general.error] no keys loaded for softcam!Aug 30 16:57:44 [core.load] ** registered systems:Aug 30 16:57:44 [core.load] ** Cardclient        (pri -15)Aug 30 16:57:44 [core.load] ** Conax             (pri -10)Aug 30 16:57:44 [core.load] ** ConstCW           (pri -20)Aug 30 16:57:44 [core.load] ** Cryptoworks       (pri -10)Aug 30 16:57:44 [core.load] ** Irdeto            (pri -10)Aug 30 16:57:44 [core.load] ** Nagra             (pri -10)Aug 30 16:57:44 [core.load] ** Nagra2            (pri -10)Aug 30 16:57:44 [core.load] ** SC-Conax          (pri  -5)Aug 30 16:57:44 [core.load] ** SC-Cryptoworks    (pri  -5)Aug 30 16:57:44 [core.load] ** SC-Irdeto         (pri  -5)Aug 30 16:57:44 [core.load] ** SC-Nagra          (pri  -5)Aug 30 16:57:44 [core.load] ** SC-Seca           (pri  -5)Aug 30 16:57:44 [core.load] ** SC-Viaccess       (pri  -5)Aug 30 16:57:44 [core.load] ** SC-VideoGuard2    (pri  -5)Aug 30 16:57:44 [core.load] ** Seca              (pri -10)Aug 30 16:57:44 [core.load] ** @SHL              (pri -10)Aug 30 16:57:44 [core.load] ** Viaccess          (pri -10)Aug 30 16:57:44 [general.info] loading cardclient config from ./sc_files/cardclient.confAug 30 16:57:44 [cardclient.newcamd] now using protocol version 525 (cdLen=8)Aug 30 16:57:44 [cardclient.core] hostname=localhost port=15000 emm=1 emmCaids 0602/ffffAug 30 16:57:44 [cardclient.core] Newcamd: username=dummy password=dummy key=0102030405060708091011121314Aug 30 16:57:44 [core.net] netwatch upAug 30 16:57:44 [core.net] connecting to localhost:15000/tcp (127.0.0.1)Aug 30 16:57:44 [cardclient.login] Newcamd: CaID=0602 admin=1 srvUA=000000001B901B0B provider 000003/0000000003FFFFFF 000002/0000000002FFFFFF 000001/0000000001000600 000000/000000000004DE5DAug 30 16:57:44 [cardclient.core] client 'Newcamd' readyAug 30 16:57:44 [cardclient.core] created 1 client(s)Aug 30 16:57:44 [general.info] loading Irdeto card infos from ./sc_files/Ird-Beta.KIDAug 30 16:57:44 [core.load] loaded 0 Irdeto cards from ./sc_files/Ird-Beta.KIDAug 30 16:57:44 [general.info] loading Seca card infos from ./sc_files/Seca.KIDAug 30 16:57:44 [core.load] loaded 0 Seca cards from ./sc_files/Seca.KIDAug 30 16:57:44 [general.info] loading Viaccess card infos from ./sc_files/Viaccess.KIDAug 30 16:57:44 [core.load] loaded 0 Viaccess cards from ./sc_files/Viaccess.KIDAug 30 16:57:44 [general.info] loading smartcard data from ./sc_files/smartcard.confAug 30 16:57:44 [general.info] loading ca cache from ./sc_files/ca.cacheAug 30 16:57:44 [general.warn] no smartcard interface defined!Aug 30 16:57:45.290 frontend: Starting thread on /dev/dvb/adapter1/frontend1The thread scheduling parameters indicate:policy = 0priority = 0Aug 30 16:57:45.293 demux: Starting thread on /dev/dvb/adapter1/demux1The thread scheduling parameters indicate:policy = 0priority = 0Aug 30 16:57:45.313 dvr: Starting thread on /dev/dvb/adapter1/dvr1The thread scheduling parameters indicate:policy = 1priority = 99Aug 30 16:57:45.314 : Listening on port 5456Aug 30 16:59:12.789 CHANNEL: Tuning frontendAug 30 16:59:12.789 CSA: Got command(1): I idx: 0 pid: 0Aug 30 16:59:38.692 CSA: Removing csa for rb: 1Aug 30 16:59:38.692 CSA: Got command(1): I idx: 0 pid: 0Aug 30 16:59:44 [core.net] idle timeout, disconnected localhost:15000Aug 30 16:59:44 [core.net] netwatch downAug 30 17:03:53.475 CSA: Got command(1): I idx: 0 pid: 0Aug 30 17:03:53.475 CSA: Got command(1): I idx: 0 pid: 0Aug 30 17:03:53.566 CHANNEL: Tuning frontendAug 30 17:03:53.566 CHANNEL: Skipping cache reset since tuning matches last tuneAug 30 17:03:54.132 CSA: Got command(1): I idx: 0 pid: 0Aug 30 17:03:54.402 CSA: Got command(1): I idx: 0 pid: 0Aug 30 17:03:54.470 CHANNEL: Tuning frontendAug 30 17:03:54.470 CSA: Got command(1): I idx: 0 pid: 0Aug 30 17:03:55.034 CSA: Got command(1): I idx: 0 pid: 0Aug 30 17:03:55.038 CSA: Got command(1): I idx: 0 pid: 0Aug 30 17:03:55.101 CHANNEL: Tuning frontendAug 30 17:03:55.102 CHANNEL: Skipping cache reset since tuning matches last tuneAug 30 17:03:55.675 CSA: Got command(1): I idx: 0 pid: 0Aug 30 17:04:18.934 CHANNEL: Tuning frontendAug 30 17:04:18.934 CSA: Got command(1): I idx: 0 pid: 0Aug 30 17:04:20.774 CSA: Removing csa for rb: 1Aug 30 17:04:21 [core.pids] 0: now tuned to source 8000 transponder 1f44Aug 30 17:04:21.332 CAM: SC completed  Tune cmdAug 30 17:04:21 [core.pids] 0: update SID 8004 (zero=0 noshift=0)Aug 30 17:04:21 [core.pids] 0: pids typ5=0058 typ5=0059 typ5=005aAug 30 17:04:21 [core.pids] 0: SID=8004 zero=0 | sid=-/-/- zero=-/-/- idle=-/-/-Aug 30 17:04:21 [core.pids] 0: found handler for SID 8004 (0.1 idle=1 idx=1)Aug 30 17:04:21 [core.ecm] 0.1: setting new SID 8004Aug 30 17:04:21 [core.pids] 0.1: pids on entryAug 30 17:04:21 [core.pids] 0.1: pids after deleteAug 30 17:04:21 [core.pids] 0: descrambling pid 0058 on index 1Called cSascDvbDevice::SetCaPidAug 30 17:04:21.365 CSA: Got command(1): P idx: 1 pid: 88Aug 30 17:04:21 [core.pids] 0: descrambling pid 0059 on index 1Called cSascDvbDevice::SetCaPidAug 30 17:04:21.365 CSA: Got command(1): P idx: 1 pid: 89Aug 30 17:04:21 [core.pids] 0: descrambling pid 005a on index 1Called cSascDvbDevice::SetCaPidAug 30 17:04:21.365 CSA: Got command(1): P idx: 1 pid: 90Aug 30 17:04:21 [core.pids] 0.1: pids after add typ5=0058 typ5=0059 typ5=005aAug 30 17:04:21 [core.ecm] 0.1: is no longer idleAug 30 17:04:21.365 MSG: Got unprocessed message type: 1Aug 30 17:04:21 [core.ecm] 0.1: triggered SID -1/8004 idx -1/1 mode -1/0 -Aug 30 17:04:21 [core.ecm] from cache: system Cardclient (0602) id 0000 with ecm 32/80Aug 30 17:04:21 [core.ecm] 0.1: got CaDescriptors for SID 8004 (len=12)Aug 30 17:04:21 [core.ecm] 0.1: descriptor 06 02 e0 32Aug 30 17:04:21 [core.ecm] 0.1: found 0602 (Irdeto) id 0000 with ecm 32 (already present)Aug 30 17:04:21 [core.ecm] 0.1: descriptor 06 04 ef a0Aug 30 17:04:21 [core.ecm] 0.1: found 0604 (Irdeto) id 0000 with ecm fa0 (new)Aug 30 17:04:21 [core.ecm] 0.1: try system Irdeto (0602) id 0000 with ecm 32 (cached) (pri=-10)Aug 30 17:04:21 [irdeto.ecm] incomplete ECM structureAug 30 17:04:21 [core.au] 0: chain caid 0602 -> Irdeto(-10) Cardclient(-15) [0030-82/ff/00]Aug 30 17:04:21 [core.au] 0: chain caid 0604 -> Irdeto(-10) [0031-82/ff/00]Aug 30 17:04:21 [core.au] 0: starting chain 0602Aug 30 17:04:21 [core.net] netwatch upAug 30 17:04:21 [core.net] connecting to localhost:15000/tcp (127.0.0.1)Aug 30 17:04:21 [cardclient.login] Newcamd: CaID=0602 admin=1 srvUA=000000001B901B0B provider 000003/0000000003FFFFFF 000002/0000000002FFFFFF 000001/0000000001000600 000000/000000000004DE5DAug 30 17:04:21 [cardclient.newcamd] bad msgid 0001 != 0002Aug 30 17:04:21 [irdeto.ecm] incomplete ECM structureAug 30 17:04:21 [core.ecm] 0.1: try system Cardclient (0602) id 0000 with ecm 32 (cached) (pri=-15)Aug 30 17:04:21 [cardclient.core] cc-loopAug 30 17:04:21 [cardclient.core] now trying client Newcamd (localhost:15000)Called cSascDvbDevice::SetCaDescrAug 30 17:04:22.127 CSA: Got command(1): E idx: 1 pid: 0 key: 4ef1...4eCalled cSascDvbDevice::SetCaDescrAug 30 17:04:22.127 CSA: Got command(1): O idx: 1 pid: 0 key: 4360...4bAug 30 17:04:22 [core.ecm] 0.1: correct key foundAug 30 17:04:22.131 CSA: Creating csa for rb: 1Aug 30 17:04:22.334 CSA: Removing csa for rb: 1Aug 30 17:04:23.550 MSG: Got unprocessed message type: 1Aug 30 17:04:23.551 MSG: Got unprocessed message type: 1Aug 30 17:04:23.558 CSA: Creating csa for rb: 1Called cSascDvbDevice::SetCaDescrAug 30 17:04:24.287 CSA: Got command(1): E idx: 1 pid: 0 key: 4ef1...4eCalled cSascDvbDevice::SetCaDescrAug 30 17:04:24.287 CSA: Got command(1): O idx: 1 pid: 0 key: 4360...4bAug 30 17:04:46.261 CSA: Removing csa for rb: 1Aug 30 17:04:46 [core.pids] 0: update SID 8004 (zero=0 noshift=0)Aug 30 17:04:46 [core.pids] 0: pids typ5=0059 typ5=0058Aug 30 17:04:46 [core.pids] 0: SID=8004 zero=0 | sid=1/8004/0 zero=-/-/- idle=-/-/-Aug 30 17:04:46 [core.pids] 0: found handler for SID 8004 (0.1 idle=0 idx=1)Aug 30 17:04:46 [core.pids] 0.1: pids on entry typ5=0058 typ5=0059 typ5=005aAug 30 17:04:46 [core.pids] 0.1: pids after delete typ5=0058 typ5=0059Aug 30 17:04:46 [core.pids] 0.1: pids after add typ5=0058 typ5=0059Aug 30 17:04:46 [core.pids] 0: update SID 8004 (zero=0 noshift=0)Aug 30 17:04:46 [core.pids] 0: pids typ5=0058Aug 30 17:04:46 [core.pids] 0: SID=8004 zero=0 | sid=1/8004/0 zero=-/-/- idle=-/-/-Aug 30 17:04:46 [core.pids] 0: found handler for SID 8004 (0.1 idle=0 idx=1)Aug 30 17:04:46 [core.pids] 0.1: pids on entry typ5=0058 typ5=0059Aug 30 17:04:46 [core.pids] 0.1: pids after delete typ5=0058Aug 30 17:04:46 [core.pids] 0.1: pids after add typ5=0058Aug 30 17:04:46 [core.pids] 0: update SID 8004 (zero=0 noshift=1)Aug 30 17:04:46 [core.pids] 0: SID=8004 zero=0 | sid=1/8004/0 zero=-/-/- idle=-/-/-Aug 30 17:04:46 [core.pids] 0: found handler for SID 8004 (0.1 idle=0 idx=1)Aug 30 17:04:46 [core.pids] 0.1: pids on entry typ5=0058Aug 30 17:04:46 [core.pids] 0.1: pids after deleteAug 30 17:04:46 [core.pids] 0.1: pids after addAug 30 17:04:46 [core.ecm] 0.1: is idle nowAug 30 17:04:46 [core.ecm] 0.1: stopAug 30 17:04:46 [core.au] 0: stopping chain 0602Aug 30 17:04:46.284 CSA: Got command(1): I idx: 0 pid: 0Aug 30 17:04:46 [core.ecm] 0.1: triggered SID 8004/-1 idx 1/1 mode 3/0 syncAug 30 17:05:21 [core.auStats] EMM packet load average (1/4/10min)   48   12    4 pks/sAug 30 17:05:47.118 CHANNEL: Tuning frontendAug 30 17:05:47.118 CSA: Got command(1): I idx: 0 pid: 0Aug 30 17:05:49 [core.pids] 0: now tuned to source 8000 transponder fa4Aug 30 17:05:49.226 CAM: SC completed  Tune cmdAug 30 17:05:49 [core.pids] 0: update SID 4004 (zero=0 noshift=0)Aug 30 17:05:49 [core.pids] 0: pids typ5=03fc typ5=0424 typ5=1bdeAug 30 17:05:49 [core.pids] 0: SID=4004 zero=0 | sid=-/-/- zero=-/-/- idle=1/-1/1Aug 30 17:05:49 [core.pids] 0: found handler for SID 4004 (0.1 idle=1 idx=1)Aug 30 17:05:49 [core.ecm] 0.1: setting new SID 4004Aug 30 17:05:49 [core.pids] 0.1: pids on entryAug 30 17:05:49 [core.pids] 0.1: pids after deleteAug 30 17:05:49 [core.pids] 0: descrambling pid 03fc on index 1Called cSascDvbDevice::SetCaPidAug 30 17:05:49.227 CSA: Got command(1): P idx: 1 pid: 1020Aug 30 17:05:49 [core.pids] 0: descrambling pid 0424 on index 1Called cSascDvbDevice::SetCaPidAug 30 17:05:49.227 CSA: Got command(1): P idx: 1 pid: 1060Aug 30 17:05:49 [core.pids] 0: descrambling pid 1bde on index 1Called cSascDvbDevice::SetCaPidAug 30 17:05:49.227 CSA: Got command(1): P idx: 1 pid: 7134Aug 30 17:05:49 [core.pids] 0.1: pids after add typ5=03fc typ5=0424 typ5=1bdeAug 30 17:05:49 [core.ecm] 0.1: is no longer idleAug 30 17:05:49.227 MSG: Got unprocessed message type: 1Aug 30 17:05:49 [core.ecm] 0.1: triggered SID -1/4004 idx 1/1 mode -1/0 -Aug 30 17:05:49 [core.ecm] 0.1: got CaDescriptors for SID 4004 (len=12)Aug 30 17:05:49 [core.ecm] 0.1: descriptor 06 02 e0 38Aug 30 17:05:49 [core.ecm] 0.1: found 0602 (Irdeto) id 0000 with ecm 38 (new)Aug 30 17:05:49 [core.ecm] 0.1: descriptor 06 04 ef a5Aug 30 17:05:49 [core.ecm] 0.1: found 0604 (Irdeto) id 0000 with ecm fa5 (new)Aug 30 17:05:49 [core.ecm] 0.1: try system Irdeto (0602) id 0000 with ecm 38 (pri=-10)Aug 30 17:05:49 [core.au] 0: chain caid 0602 -> Irdeto(-10) Cardclient(-15) [0030-82/ff/00]Aug 30 17:05:49 [core.au] 0: chain caid 0604 -> Irdeto(-10) [0031-82/ff/00]Aug 30 17:05:49 [core.au] 0: starting chain 0602Aug 30 17:05:49 [irdeto.ecm] incomplete ECM structureAug 30 17:05:49 [irdeto.ecm] last message repeated 4 timesAug 30 17:05:49 [core.au] 0: starting chain 0604Aug 30 17:05:49 [core.ecm] 0.1: try system Irdeto (0604) id 0000 with ecm fa5 (pri=-10)Aug 30 17:05:49 [irdeto.ecm] incomplete ECM structureAug 30 17:05:49 [irdeto.ecm] last message repeated 4 timesAug 30 17:05:49 [core.ecm] 0.1: try system Cardclient (0602) id 0000 with ecm 38 (pri=-15)Aug 30 17:05:49 [cardclient.core] cc-loopAug 30 17:05:49 [cardclient.core] now trying client Newcamd (localhost:15000)Aug 30 17:05:50 [cardclient.ecm] Newcamd: card was not able to decode the channelAug 30 17:05:50 [cardclient.core] client Newcamd (localhost:15000) ECM failed (177 ms)Aug 30 17:05:50 [cardclient.core] cc-loopAug 30 17:05:50 [cardclient.core] now trying client Newcamd (localhost:15000)Aug 30 17:05:50 [cardclient.ecm] Newcamd: card was not able to decode the channelAug 30 17:05:50 [cardclient.core] client Newcamd (localhost:15000) ECM failed (1 ms)Aug 30 17:05:50 [cardclient.core] cc-loopAug 30 17:05:50 [cardclient.core] now trying client Newcamd (localhost:15000)Aug 30 17:05:50 [cardclient.ecm] Newcamd: card was not able to decode the channelAug 30 17:05:50 [cardclient.core] client Newcamd (localhost:15000) ECM failed (0 ms)Aug 30 17:05:50 [cardclient.core] cc-loopAug 30 17:05:50 [cardclient.core] now trying client Newcamd (localhost:15000)Aug 30 17:05:50 [cardclient.ecm] Newcamd: card was not able to decode the channelAug 30 17:05:50 [cardclient.core] client Newcamd (localhost:15000) ECM failed (0 ms)Aug 30 17:05:50 [cardclient.core] cc-loopAug 30 17:05:50 [cardclient.core] now trying client Newcamd (localhost:15000)Aug 30 17:05:50 [cardclient.ecm] Newcamd: card was not able to decode the channelAug 30 17:05:50 [cardclient.core] client Newcamd (localhost:15000) ECM failed (1 ms)Aug 30 17:05:50 [core.ecm] 0.1: got CaDescriptors for SID 4004 (len=12)Aug 30 17:05:50 [core.ecm] 0.1: descriptor 06 02 e0 38Aug 30 17:05:50 [core.ecm] 0.1: found 0602 (Irdeto) id 0000 with ecm 38 (already present)Aug 30 17:05:50 [core.ecm] 0.1: descriptor 06 04 ef a5Aug 30 17:05:50 [core.ecm] 0.1: found 0604 (Irdeto) id 0000 with ecm fa5 (already present)Aug 30 17:05:50 [core.ecm] 0.1: try system Irdeto (0602) id 0000 with ecm 38 (pri=-10)Aug 30 17:05:50 [irdeto.ecm] incomplete ECM structureAug 30 17:05:50 [irdeto.ecm] last message repeated 4 timesAug 30 17:05:50 [core.ecm] 0.1: try system Irdeto (0604) id 0000 with ecm fa5 (pri=-10)Aug 30 17:05:50 [irdeto.ecm] incomplete ECM structureAug 30 17:05:50 [irdeto.ecm] last message repeated 4 timesAug 30 17:05:50 [core.ecm] 0.1: try system Cardclient (0602) id 0000 with ecm 38 (pri=-15)Aug 30 17:05:50 [cardclient.core] cc-loopAug 30 17:05:50 [cardclient.core] now trying client Newcamd (localhost:15000)Aug 30 17:05:50 [cardclient.core] cc-loopAug 30 17:05:50 [cardclient.core] now trying client Newcamd (localhost:15000)Aug 30 17:05:50 [cardclient.core] cc-loopAug 30 17:05:50 [cardclient.core] now trying client Newcamd (localhost:15000)Aug 30 17:05:50 [cardclient.ecm] Newcamd: card was not able to decode the channelAug 30 17:05:50 [cardclient.core] client Newcamd (localhost:15000) ECM failed (1 ms)Aug 30 17:05:51 [cardclient.core] cc-loopAug 30 17:05:51 [cardclient.core] now trying client Newcamd (localhost:15000)Aug 30 17:05:51 [cardclient.core] cc-loopAug 30 17:05:51 [cardclient.core] now trying client Newcamd (localhost:15000)Aug 30 17:05:51 [core.ecm] 0.1: got CaDescriptors for SID 4004 (len=12)Aug 30 17:05:51 [core.ecm] 0.1: descriptor 06 02 e0 38Aug 30 17:05:51 [core.ecm] 0.1: found 0602 (Irdeto) id 0000 with ecm 38 (already present)Aug 30 17:05:51 [core.ecm] 0.1: descriptor 06 04 ef a5Aug 30 17:05:51 [core.ecm] 0.1: found 0604 (Irdeto) id 0000 with ecm fa5 (already present)Aug 30 17:05:51 [core.ecm] 0.1: try system Irdeto (0602) id 0000 with ecm 38 (pri=-10)Aug 30 17:05:55 [irdeto.ecm] incomplete ECM structureAug 30 17:05:55 [irdeto.ecm] last message repeated 4 timesAug 30 17:05:55 [core.ecm] 0.1: try system Irdeto (0604) id 0000 with ecm fa5 (pri=-10)Aug 30 17:05:55 [irdeto.ecm] incomplete ECM structureAug 30 17:05:56 [irdeto.ecm] last message repeated 4 timesAug 30 17:05:56 [core.ecm] 0.1: try system Cardclient (0602) id 0000 with ecm 38 (pri=-15)Aug 30 17:05:56 [cardclient.core] cc-loopAug 30 17:05:56 [cardclient.core] now trying client Newcamd (localhost:15000)Aug 30 17:05:56 [cardclient.ecm] Newcamd: card was not able to decode the channelAug 30 17:05:56 [cardclient.core] client Newcamd (localhost:15000) ECM failed (179 ms)Aug 30 17:05:56 [cardclient.core] cc-loopAug 30 17:05:56 [cardclient.core] now trying client Newcamd (localhost:15000)Aug 30 17:05:56 [cardclient.ecm] Newcamd: card was not able to decode the channelAug 30 17:05:56 [cardclient.core] client Newcamd (localhost:15000) ECM failed (0 ms)Aug 30 17:05:56 [cardclient.core] cc-loopAug 30 17:05:56 [cardclient.core] now trying client Newcamd (localhost:15000)Aug 30 17:05:56 [cardclient.ecm] Newcamd: card was not able to decode the channelAug 30 17:05:56 [cardclient.core] client Newcamd (localhost:15000) ECM failed (0 ms)Aug 30 17:05:56 [cardclient.core] cc-loopAug 30 17:05:56 [cardclient.core] now trying client Newcamd (localhost:15000)Aug 30 17:05:56 [cardclient.ecm] Newcamd: card was not able to decode the channelAug 30 17:05:56 [cardclient.core] client Newcamd (localhost:15000) ECM failed (1 ms)Aug 30 17:05:56 [cardclient.core] cc-loopAug 30 17:05:56 [cardclient.core] now trying client Newcamd (localhost:15000)Aug 30 17:05:56 [cardclient.ecm] Newcamd: card was not able to decode the channelAug 30 17:05:56 [cardclient.core] client Newcamd (localhost:15000) ECM failed (0 ms)Aug 30 17:05:56 [core.ecm] 0.1: got CaDescriptors for SID 4004 (len=12)Aug 30 17:05:56 [core.ecm] 0.1: descriptor 06 02 e0 38Aug 30 17:05:56 [core.ecm] 0.1: found 0602 (Irdeto) id 0000 with ecm 38 (already present)Aug 30 17:05:56 [core.ecm] 0.1: descriptor 06 04 ef a5Aug 30 17:05:56 [core.ecm] 0.1: found 0604 (Irdeto) id 0000 with ecm fa5 (already present)Aug 30 17:05:56 [core.ecm] 0.1: try system Irdeto (0602) id 0000 with ecm 38 (pri=-10)Aug 30 17:05:56 [core.ecm] 0.1: stopping message log until valid key is foundAug 30 17:06:16 [irdeto.ecm] incomplete ECM structureAug 30 17:06:17 [irdeto.ecm] last message repeated 9 timesAug 30 17:06:17 [cardclient.core] cc-loopAug 30 17:06:17 [cardclient.core] now trying client Newcamd (localhost:15000)Aug 30 17:06:17 [cardclient.ecm] Newcamd: card was not able to decode the channelAug 30 17:06:17 [cardclient.core] client Newcamd (localhost:15000) ECM failed (191 ms)Aug 30 17:06:17 [cardclient.core] cc-loopAug 30 17:06:17 [cardclient.core] now trying client Newcamd (localhost:15000)Aug 30 17:06:17 [cardclient.ecm] Newcamd: card was not able to decode the channelAug 30 17:06:17 [cardclient.core] client Newcamd (localhost:15000) ECM failed (1 ms)Aug 30 17:06:17 [cardclient.core] cc-loopAug 30 17:06:17 [cardclient.core] now trying client Newcamd (localhost:15000)Aug 30 17:06:17 [cardclient.ecm] Newcamd: card was not able to decode the channelAug 30 17:06:17 [cardclient.core] client Newcamd (localhost:15000) ECM failed (0 ms)Aug 30 17:06:17 [cardclient.core] cc-loopAug 30 17:06:17 [cardclient.core] now trying client Newcamd (localhost:15000)Aug 30 17:06:17 [cardclient.ecm] Newcamd: card was not able to decode the channelAug 30 17:06:17 [cardclient.core] client Newcamd (localhost:15000) ECM failed (0 ms)Aug 30 17:06:17 [cardclient.core] cc-loopAug 30 17:06:17 [cardclient.core] now trying client Newcamd (localhost:15000)Aug 30 17:06:17 [cardclient.ecm] Newcamd: card was not able to decode the channelAug 30 17:06:17 [cardclient.core] client Newcamd (localhost:15000) ECM failed (0 ms)Aug 30 17:06:21 [core.auStats] EMM packet load average (1/4/10min)    9   14    5 pks/sAug 30 17:06:37 [irdeto.ecm] incomplete ECM structureAug 30 17:06:38 [irdeto.ecm] last message repeated 9 timesAug 30 17:06:38 [cardclient.core] cc-loopAug 30 17:06:38 [cardclient.core] now trying client Newcamd (localhost:15000)Aug 30 17:06:38 [cardclient.ecm] Newcamd: card was not able to decode the channelAug 30 17:06:38 [cardclient.core] client Newcamd (localhost:15000) ECM failed (376 ms)Aug 30 17:06:38 [cardclient.core] cc-loopAug 30 17:06:38 [cardclient.core] now trying client Newcamd (localhost:15000)Aug 30 17:06:38 [cardclient.ecm] Newcamd: card was not able to decode the channelAug 30 17:06:38 [cardclient.core] client Newcamd (localhost:15000) ECM failed (0 ms)Aug 30 17:06:38 [cardclient.core] cc-loopAug 30 17:06:38 [cardclient.core] now trying client Newcamd (localhost:15000)Aug 30 17:06:38 [cardclient.ecm] Newcamd: card was not able to decode the channelAug 30 17:06:38 [cardclient.core] client Newcamd (localhost:15000) ECM failed (1 ms)Aug 30 17:06:38 [cardclient.core] cc-loopAug 30 17:06:38 [cardclient.core] now trying client Newcamd (localhost:15000)Aug 30 17:06:38 [cardclient.ecm] Newcamd: card was not able to decode the channelAug 30 17:06:38 [cardclient.core] client Newcamd (localhost:15000) ECM failed (0 ms)Aug 30 17:06:38 [cardclient.core] cc-loopAug 30 17:06:38 [cardclient.core] now trying client Newcamd (localhost:15000)Aug 30 17:06:38 [cardclient.ecm] Newcamd: card was not able to decode the channelAug 30 17:06:38 [cardclient.core] client Newcamd (localhost:15000) ECM failed (0 ms)Aug 30 17:06:50.310 CSA: Removing csa for rb: 1Aug 30 17:06:50 [core.pids] 0: update SID 4004 (zero=0 noshift=0)Aug 30 17:06:50 [core.pids] 0: pids typ5=0424 typ5=03fcAug 30 17:06:50 [core.pids] 0: SID=4004 zero=0 | sid=1/4004/0 zero=-/-/- idle=-/-/-Aug 30 17:06:50 [core.pids] 0: found handler for SID 4004 (0.1 idle=0 idx=1)Aug 30 17:06:50 [core.pids] 0.1: pids on entry typ5=03fc typ5=0424 typ5=1bdeAug 30 17:06:50 [core.pids] 0.1: pids after delete typ5=03fc typ5=0424Aug 30 17:06:50 [core.pids] 0.1: pids after add typ5=03fc typ5=0424Aug 30 17:06:50 [core.pids] 0: update SID 4004 (zero=0 noshift=0)Aug 30 17:06:50 [core.pids] 0: pids typ5=03fcAug 30 17:06:50 [core.pids] 0: SID=4004 zero=0 | sid=1/4004/0 zero=-/-/- idle=-/-/-Aug 30 17:06:50 [core.pids] 0: found handler for SID 4004 (0.1 idle=0 idx=1)Aug 30 17:06:50 [core.pids] 0.1: pids on entry typ5=03fc typ5=0424Aug 30 17:06:50 [core.pids] 0.1: pids after delete typ5=03fcAug 30 17:06:50 [core.pids] 0.1: pids after add typ5=03fcAug 30 17:06:50 [core.pids] 0: update SID 4004 (zero=0 noshift=1)Aug 30 17:06:50 [core.pids] 0: SID=4004 zero=0 | sid=1/4004/0 zero=-/-/- idle=-/-/-Aug 30 17:06:50 [core.pids] 0: found handler for SID 4004 (0.1 idle=0 idx=1)Aug 30 17:06:50 [core.pids] 0.1: pids on entry typ5=03fcAug 30 17:06:50 [core.pids] 0.1: pids after deleteAug 30 17:06:50 [core.pids] 0.1: pids after addAug 30 17:06:50 [core.ecm] 0.1: is idle nowAug 30 17:06:50 [core.ecm] 0.1: stopAug 30 17:06:50 [core.au] 0: stopping chain 0602Aug 30 17:06:50 [core.au] 0: stopping chain 0604Aug 30 17:06:50.343 CSA: Got command(1): I idx: 0 pid: 0Aug 30 17:06:50 [core.ecm] 0.1: triggered SID 4004/-1 idx 1/1 mode 3/0 -Aug 30 17:07:03.005 CHANNEL: Tuning frontendAug 30 17:07:03.005 CSA: Got command(1): I idx: 0 pid: 0Aug 30 17:07:05.092 MSG: Got unprocessed message type: 1Aug 30 17:07:05.092 MSG: Got unprocessed message type: 1Aug 30 17:07:05.192 CSA: Removing csa for rb: 1Aug 30 17:07:06.389 MSG: Got unprocessed message type: 1Aug 30 17:07:06.390 MSG: Got unprocessed message type: 1Aug 30 17:07:21 [core.auStats] EMM packet load average (1/4/10min)  279   84   33 pks/sAug 30 17:07:38.571 CSA: Removing csa for rb: 1Aug 30 17:07:38.581 CHANNEL: Tuning frontendAug 30 17:07:38.581 CSA: Got command(1): I idx: 0 pid: 0Aug 30 17:07:40.907 CSA: Removing csa for rb: 1Aug 30 17:07:42.067 MSG: Got unprocessed message type: 1Aug 30 17:07:42.067 MSG: Got unprocessed message type: 1Aug 30 17:07:55.220 CSA: Removing csa for rb: 1Aug 30 17:07:55.240 CHANNEL: Tuning frontendAug 30 17:07:55.241 CSA: Got command(1): I idx: 0 pid: 0Aug 30 17:07:57 [core.pids] 0: now tuned to source 8000 transponder 1f45Aug 30 17:07:57.540 CAM: SC completed  Tune cmdAug 30 17:07:57 [core.pids] 0: update SID 8005 (zero=0 noshift=0)Aug 30 17:07:57 [core.pids] 0: pids typ5=0024 typ5=0025 typ5=00c2Aug 30 17:07:57 [core.pids] 0: SID=8005 zero=0 | sid=-/-/- zero=-/-/- idle=1/-1/1Aug 30 17:07:57 [core.pids] 0: found handler for SID 8005 (0.1 idle=1 idx=1)Aug 30 17:07:57 [core.ecm] 0.1: setting new SID 8005Aug 30 17:07:57 [core.pids] 0.1: pids on entryAug 30 17:07:57 [core.pids] 0.1: pids after deleteAug 30 17:07:57 [core.pids] 0: descrambling pid 0024 on index 1Called cSascDvbDevice::SetCaPidAug 30 17:07:57.540 CSA: Got command(1): P idx: 1 pid: 36Aug 30 17:07:57 [core.pids] 0: descrambling pid 0025 on index 1Called cSascDvbDevice::SetCaPidAug 30 17:07:57.540 CSA: Got command(1): P idx: 1 pid: 37Aug 30 17:07:57 [core.pids] 0: descrambling pid 00c2 on index 1Called cSascDvbDevice::SetCaPidAug 30 17:07:57.540 CSA: Got command(1): P idx: 1 pid: 194Aug 30 17:07:57 [core.pids] 0.1: pids after add typ5=0024 typ5=0025 typ5=00c2Aug 30 17:07:57 [core.ecm] 0.1: is no longer idleAug 30 17:07:57.540 MSG: Got unprocessed message type: 1Aug 30 17:07:57 [core.ecm] 0.1: triggered SID -1/8005 idx 1/1 mode -1/0 -Aug 30 17:07:57 [core.ecm] 0.1: got CaDescriptors for SID 8005 (len=12)Aug 30 17:07:57 [core.ecm] 0.1: descriptor 06 02 e0 35Aug 30 17:07:57 [core.ecm] 0.1: found 0602 (Irdeto) id 0000 with ecm 35 (new)Aug 30 17:07:57 [core.ecm] 0.1: descriptor 06 04 ef a3Aug 30 17:07:57 [core.ecm] 0.1: found 0604 (Irdeto) id 0000 with ecm fa3 (new)Aug 30 17:07:57 [core.ecm] 0.1: try system Irdeto (0602) id 0000 with ecm 35 (pri=-10)Aug 30 17:07:57 [irdeto.ecm] incomplete ECM structureAug 30 17:07:57 [core.au] 0: chain caid 0602 -> Irdeto(-10) Cardclient(-15) [0030-82/ff/00]Aug 30 17:07:57 [core.au] 0: chain caid 0604 -> Irdeto(-10) [0031-82/ff/00]Aug 30 17:07:57 [core.au] 0: starting chain 0602Aug 30 17:07:57 [irdeto.ecm] incomplete ECM structureAug 30 17:07:57 [core.au] 0: starting chain 0604Aug 30 17:07:57 [core.ecm] 0.1: try system Irdeto (0604) id 0000 with ecm fa3 (pri=-10)Aug 30 17:07:57 [irdeto.ecm] incomplete ECM structureAug 30 17:07:58 [irdeto.ecm] last message repeated 4 timesAug 30 17:07:58 [core.ecm] 0.1: try system Cardclient (0602) id 0000 with ecm 35 (pri=-15)Aug 30 17:07:58 [cardclient.core] cc-loopAug 30 17:07:58 [cardclient.core] now trying client Newcamd (localhost:15000)Called cSascDvbDevice::SetCaDescrAug 30 17:07:58.522 CSA: Got command(1): E idx: 1 pid: 0 key: 4ef1...4eCalled cSascDvbDevice::SetCaDescrAug 30 17:07:58.522 CSA: Got command(1): O idx: 1 pid: 0 key: 4360...4bAug 30 17:07:58 [core.ecm] cache add prgId=8005 source=8000 transponder=1f45 ecm=35/80Aug 30 17:07:58.544 CSA: Creating csa for rb: 1Aug 30 17:07:58 [core.load] saved cache to fileAug 30 17:07:58 [core.ecm] 0.1: correct key foundAug 30 17:07:58.750 CSA: Removing csa for rb: 1Aug 30 17:07:59.919 MSG: Got unprocessed message type: 1Aug 30 17:07:59.919 MSG: Got unprocessed message type: 1Aug 30 17:07:59.924 CSA: Creating csa for rb: 1Called cSascDvbDevice::SetCaDescrAug 30 17:08:00.677 CSA: Got command(1): E idx: 1 pid: 0 key: 4ef1...4eCalled cSascDvbDevice::SetCaDescrAug 30 17:08:00.677 CSA: Got command(1): O idx: 1 pid: 0 key: 4360...4bAug 30 17:08:23.053 CSA: Removing csa for rb: 1Aug 30 17:08:23 [core.pids] 0: update SID 8005 (zero=0 noshift=0)Aug 30 17:08:23 [core.pids] 0: pids typ5=0025 typ5=0024Aug 30 17:08:23 [core.pids] 0: SID=8005 zero=0 | sid=1/8005/0 zero=-/-/- idle=-/-/-Aug 30 17:08:23 [core.pids] 0: found handler for SID 8005 (0.1 idle=0 idx=1)Aug 30 17:08:23 [core.pids] 0.1: pids on entry typ5=0024 typ5=0025 typ5=00c2Aug 30 17:08:23 [core.pids] 0.1: pids after delete typ5=0024 typ5=0025Aug 30 17:08:23 [core.pids] 0.1: pids after add typ5=0024 typ5=0025Aug 30 17:08:23 [core.pids] 0: update SID 8005 (zero=0 noshift=0)Aug 30 17:08:23 [core.pids] 0: pids typ5=0024Aug 30 17:08:23 [core.pids] 0: SID=8005 zero=0 | sid=1/8005/0 zero=-/-/- idle=-/-/-Aug 30 17:08:23 [core.pids] 0: found handler for SID 8005 (0.1 idle=0 idx=1)Aug 30 17:08:23 [core.pids] 0.1: pids on entry typ5=0024 typ5=0025Aug 30 17:08:23 [core.pids] 0.1: pids after delete typ5=0024Aug 30 17:08:23 [core.pids] 0.1: pids after add typ5=0024Aug 30 17:08:23 [core.pids] 0: update SID 8005 (zero=0 noshift=1)Aug 30 17:08:23 [core.pids] 0: SID=8005 zero=0 | sid=1/8005/0 zero=-/-/- idle=-/-/-Aug 30 17:08:23 [core.pids] 0: found handler for SID 8005 (0.1 idle=0 idx=1)Aug 30 17:08:23 [core.pids] 0.1: pids on entry typ5=0024Aug 30 17:08:23 [core.pids] 0.1: pids after deleteAug 30 17:08:23 [core.pids] 0.1: pids after addAug 30 17:08:23 [core.ecm] 0.1: is idle nowAug 30 17:08:23 [core.ecm] 0.1: stopAug 30 17:08:23 [core.au] 0: stopping chain 0602Aug 30 17:08:23 [core.au] 0: stopping chain 0604Aug 30 17:08:23.068 CSA: Got command(1): I idx: 0 pid: 0Aug 30 17:08:23 [core.ecm] 0.1: triggered SID 8005/-1 idx 1/1 mode 3/0 syncAug 30 17:09:21 [core.auStats] EMM packet load average (1/4/10min)  127  104   46 pks/sAug 30 17:10:21 [core.net] idle timeout, disconnected localhost:15000Aug 30 17:10:21 [core.net] netwatch down

 

Link naar reactie
Delen op andere sites

Maak een account aan of log in om te reageren

Je moet een lid zijn om een reactie te kunnen achterlaten

Account aanmaken

Registreer voor een nieuwe account in onze community. Het is erg gemakkelijk!

Registreer een nieuwe account

Inloggen

Heb je reeds een account? Log hier in.

Nu inloggen
 Delen
Ga naar topic overzicht

  • Wie is er online   0 leden

    • Er zijn geen geregistreerde gebruikers deze pagina aan het bekijken
×
×
  • Nieuwe aanmaken...