usb 2.0 pendrive of CF+usb reader

[Gast]

Vindt ik ook hoor..deze manier werkt wel maar is niet voor mij weggelegd..Vindt het niet echt DE oplossing.Al die handelingen !

Ik wacht met smart naar de oplossing van DREAM..Zonder veel poespas moeten doen.

 

[Gast]

@Wranglerz

 

Nee dat werkt niet als je de hd op slave zet samen met de cf dan ziet hij de hd niet meer ;-(

[wranglerz]

Op duits board gelezen :

 

 

CR hat folgendes geschrieben::

mit nem CF müsste es gehen. die werden doch als "festplatte" erkannt, oder ?

 

Ja da gehts perfekt, CF taucht als HD Master auf, die festplatte kann man dann slave jumpern, man muss dann nur die rcS im jeweiligem image noch ändern, von Code:

mount /dev/ide/host0/bus0/target0/lun0/part1 /hdd/

auf Code:

mount /dev/ide/host0/bus0/target1/lun0/part1 /hdd/

 

dann hat man beides

 

reicht es eigentlich, in der rcS von imgonUSB über dem usbmount nur das fb.o modul zu laden, und sonst nichts ? ist zwar nicht sauber, wenn man den fb nicht rauswerfen kann. aber wenns dann funktioniert ???!!

 

Wie weet ?? <img src="/ubbthreads/images/graemlins/confused.gif" alt="" /> <img src="/ubbthreads/images/graemlins/laugh.gif" alt="" />

[Ronaldd]

Kan iemand die WEL een CF flash erin heeft en GEEN hdd even de dmesg output, na een reboot als file uploaden. Als iedereen, die dit bericht leest, wel een hdd erin heeft dan haal ik mijn hdd er wel even uit om deze messages te krijgen.

 

Ronald

[rongogo]

@ ronald

Hierzo zonder hdd en usb cardreader alleen cf in db.:

 

~ > dmesg

Linux version 2.4.20 (ghost@client) (gcc version 3.2.1) #1 Mon Jun 9 01:38:12 CE

ST 2003

On node 0 totalpages: 8192

zone(0): 8192 pages.

zone(1): 0 pages.

zone(2): 0 pages.

Kernel command line: console=null root=/dev/mtdblock0 ro rootfstype=cramfs

Console: colour dummy device 80x25

Calibrating delay loop... 251.49 BogoMIPS

Memory: 29796k available (1892k kernel code, 592k data, 92k init, 0k highmem)

Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)

Inode cache hash table entries: 2048 (order: 2, 16384 bytes)

Mount-cache hash table entries: 512 (order: 0, 4096 bytes)

Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)

Page-cache hash table entries: 8192 (order: 3, 32768 bytes)

POSIX conformance testing by UNIFIX

PCI: Probing PCI hardware

Linux NET4.0 for Linux 2.4

Based upon Swansea University Computer Society NET3.039

Initializing RT netlink socket

OCP uart ver 1.6.2 init complete

Starting kswapd

Journalled Block Device driver loaded

devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)

devfs: boot_options: 0x1

JFFS2 version 2.1. © 2001 Red Hat, Inc., designed by Axis Communications AB.

i2c-core.o: i2c core module

i2c-dev.o: i2c /dev entries driver module

i2c-core.o: driver i2c-dev dummy driver registered.

i2c-proc.o version 2.6.1 (20010825)

pty: 256 Unix98 ptys configured

Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI en

abled

ttyS00 at 0xe0040000 (irq = 20) is a 16550A

ttyS01 at 0xe0000000 (irq = 21) is a 16550A

ttyS02 at 0xe00e0000 (irq = 31) is a 16550A

Uniform Multi-Platform E-IDE driver Revision: 6.31

ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx

IBM IDE ocp driver version 2.2

ide_redwood: waiting for drive ready......Drive spun up

hda: SAMSUNG CF/ATA, ATA DISK drive

Unhandled interrupt 19, disabled

hda: set_drive_speed_status: status=0x51 { DriveReady SeekComplete Error }

hda: set_drive_speed_status: error=0x01 { AddrMarkNotFound }, CHS=0/0/1

ide0: Drive 0 didn't accept speed setting. Oh, well.

ide0 at 0xc307d1f8-0xc307d1ff,0xc307d1f6 on irq 25

hda: not ready for 48 bit yet... force 28bit LBA

hda: 251904 sectors (129 MB) w/1KiB Cache, CHS=492/16/32

Partition check:

/dev/ide/host0/bus0/target0/lun0: unknown partition table

loop: loaded (max 8 devices)

smc91111.c:v1.0saa 08/22/01 by Daris A Nevil (dnevil@snmc.com)

eth0: SMC91C11xFD(r:1) at 0xc3083300 IRQ:28

MEM:8192b NOWAIT:0 ADDR 00:09:34:00:07:97

SCSI subsystem driver Revision: 1.00

kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2

kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2

kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2

dreambox: flash mapping: 800000 at 7f800000

0: offset=0x0,size=0x20000,blocks=64

disable flash VPP

Creating 6 MTD partitions on "DreamBOX rev3+":

0x00000000-0x00600000 : "DreamBOX cramfs"

0x00600000-0x007c0000 : "DreamBOX jffs2"

0x007c0000-0x00800000 : "DreamBOX OpenBIOS"

0x00000000-0x007c0000 : "DreamBOX (w/o bootloader)"

0x00000000-0x00800000 : "DreamBOX (w/ bootloader)"

0x00120000-0x00600000 : "DreamBOX SquashedFS"

usb.c: registered new driver usbdevfs

usb.c: registered new driver hub

usb-ohci.c: USB OHCI at membase 0xc3888000, IRQ 18

usb-ohci.c: usb-ocp, builtin

usb.c: new USB bus registered, assigned bus number 1

hub.c: USB hub found

hub.c: 2 ports detected

usb.c: registered new driver hiddev

usb.c: registered new driver hid

hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <vojtech@suse.cz>

hid-core.c: USB HID support drivers

Initializing USB Mass Storage driver...

usb.c: registered new driver usb-storage

USB Mass Storage support registered.

mice: PS/2 mouse device common for all mice

IBM On-chip iic (i2c) algorithm module 2002.30.04

iic_ibmocp_init: IBM on-chip iic adapter module

i2c-dev.o: Registered 'IBM OCP IIC adapter' as minor 0

i2c-core.o: adapter IBM OCP IIC adapter registered as adapter 0.

i2c-dev.o: Registered 'IBM OCP IIC adapter' as minor 1

i2c-core.o: adapter IBM OCP IIC adapter registered as adapter 1.

NET4: Linux TCP/IP 1.0 for NET4.0

IP Protocols: ICMP, UDP, TCP, IGMP

IP: routing cache hash table of 512 buckets, 4Kbytes

TCP: Hash tables configured (established 2048 bind 4096)

NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.

VFS: Mounted root (cramfs filesystem) readonly.

Mounted devfs on /dev

Freeing unused kernel memory: 92k init

Warning: unable to open an initial console.

fb: loaded

dummycon (0)<3>fbcon_setup: No support for fontwidth 8

fbcon_setup: type 0 (aux 0, depth 8) not supported

Console: switching to colour frame buffer device 90x36

pfb: fb0: Pallas frame buffer device

i2c-core.o: driver DreamBOX frontprocessor registered.

i2c-core.o: client [fp] registered to adapter [iBM OCP IIC adapter](pos. 0).

fp: attaching fp at 0xee to adapter IBM OCP IIC adapter

error occured: 43

incomplete xfer

nack

event: init ...

CICCR:00800088

core: Loaded IBM STB04xxx core driver

write 1 event's ...

registering device.

demux: inited

xp0_clk_stop

[XP1] Init

[XP1] 896KBytes used for Queues

i2c-core.o: driver stv0299 DVB demodulator registered.

i2c-core.o: client [stv0299] registered to adapter [iBM OCP IIC adapter](pos. 1)

.

registering frontend...

enable continuous tone

already got one.

i2c-core.o: driver Mitel tuner driver registered.

i2c-core.o: client [Dreambox Tuner Driver] registered to adapter [iBM OCP IIC ad

apter](pos. 2).

lcd.o: LCD driver (KS0713) module

i2c-core.o: driver DreamBOX AV-Switch registered.

i2c-core.o: client [avs] registered to adapter [iBM OCP IIC adapter](pos. 3).

avs: attaching avs at 0x94 to adapter IBM OCP IIC adapter

error occured: 43

incomplete xfer

nack

sdev: Loading sdev module

INT:8

enable_irq(8) unbalanced

INT:16

enable_irq(16) unbalanced

VFS: Disk change detected on device 03:00

/dev/ide/host0/bus0/target0/lun0: unknown partition table

VFS: Disk change detected on device 03:00

/dev/ide/host0/bus0/target0/lun0: unknown partition table

VFS: Disk change detected on device 03:00

/dev/ide/host0/bus0/target0/lun0: unknown partition table

VFS: Disk change detected on device 03:00

/dev/ide/host0/bus0/target0/lun0: unknown partition table

VFS: Disk change detected on device 03:00

/dev/ide/host0/bus0/target0/lun0: unknown partition table

VFS: Disk change detected on device 03:00

/dev/ide/host0/bus0/target0/lun0: unknown partition table

VFS: Disk change detected on device 03:00

/dev/ide/host0/bus0/target0/lun0: unknown partition table

VFS: Disk change detected on device 03:00

/dev/ide/host0/bus0/target0/lun0: unknown partition table

/dev/ide/host0/bus0/target0/lun0: unknown partition table

/dev/ide/host0/bus0/target0/lun0: unknown partition table

hda: task_no_data_intr: status=0x51 { DriveReady SeekComplete Error }

hda: task_no_data_intr: error=0x01 { AddrMarkNotFound }, LBAsect=0, sector=0

eth0:PHY remote fault detected

dummycon (0)<3>fbcon_setup: No support for fontwidth 8

fbcon_setup: type 0 (aux 0, depth 8) not supported

set event: 00000009

ci-open

[DENC] set mode to FBAS

[AVS] FBLK:0

set_vsw1:5

[DENC] set mode to FBAS

[AVS] FBLK:0

[AVS] FNC:2

[DENC] disable WSS

[AVS] FNC:2

disable continuous tone

(0)commited command sent

(0)commited command sent

(0)commited command sent

enable continuous tone

VIDEO_PLAY / VIDEO_CONTINUE, state 0 0

xp0_clk_start

open id:0

open id:0

driver free

card present

open id:1

open id:1

driver free

card present

overriding freq

overriding ETU

open id:0

open id:0

driver free

card present

open id:1

open id:1

driver free

card present

~ >

 

ROnGOGO

[hemertje]

dom vraagje misschien?

 

maar wat is een CF?

 

kwartje valt ff niet met die euro's <img src="/ubbthreads/images/graemlins/grin.gif" alt="" />

[Hotbird]

CF = Compact Flash kaart.

[hemertje]

ligt dus toch aan de euro's! <img src="/ubbthreads/images/graemlins/biggthumpup.gif" alt="" />

 

Thx

[Gast]

@Ronaldd

 

Goedemorgen, Heb je al een idee of je het aan de praat krijgt. Ben gewoon even nieuwsgierig.

 

pr.dag.

 

gr.

[Ronaldd]

Ten eerste rongogo bedankt voor de dump.

 

Poster, verwacht er niet te veel van.

 

Wat ik wil gaan proberen is om de linux kernel de opdracht te geven om 1 van de twee ide controlers, (als er 2 zijn, weet dat nl niet zeker), te forceren naar ide1. Als ik een 'cat /proc/ioports' doe, dan zie ik 2 maal ide0 op 2 verschillende addressen.

 

~ > cat /proc/ioports

c307d1f6-c307d1f6 : ide0 # Deze is denk ik voor hdd

c307d1f8-c307d1ff : ide0 # Deze is denk ik voor CF

c3083300-c308330f : eth0

 

In linux zou je met het boot parameter 'ide1=c307d1f6,c307d1f6' oid de ene ide controler moeten kunnen forceren naar ide1 en als dat lukt, dan zullen er in /dev ook 2 entries komen en kunnen beide devices gemount worden.

 

Dit is echter theory. Het is wel vaker zo dat theoretische dingen in de praktijk niet werken.

 

Ronald