rotewerken

16 februari 2019

Heb je voorbeeld configs hiervan? Of wellicht een link maar iets bruikbaars? Want wat ik heb gevonden, werkt niet...

16 februari 2019

Wellicht weten @Codx, @Mikisiku hier iets op?..

15 februari 2019

Hij doet wat!

Ik zag eerst geen ttyUSB0 device. Die zie ik nu wel. Ik heb die eens in de config gezet ipv de ttyAMA0.

Nu krijg ik dit. Maar, nog steeds geen entitlements.

in mijn config staat:

ident                         = 0606:AAAAAA

Dat heb ik uit een online voorbeeld gehaald.

Die AAAAA moet ik vervangen, maar voor wat?

Log:

-------------------------------------------------------------------------------
>> OSCam <<  cardserver log switched at Fri Feb 15 22:08:42 2019
-------------------------------------------------------------------------------
2019/02/15 22:08:42 00000000 s >> OSCam << cardserver log switched, version 1.20_svn, build r11492 (arm-linux-gnueabihf)
2019/02/15 22:08:42 00000000 s     (main) System name    = Linux
2019/02/15 22:08:42 00000000 s     (main) Host name      = tvheadend
2019/02/15 22:08:42 00000000 s     (main) Release        = 4.14.78-4-osmc
2019/02/15 22:08:42 00000000 s     (main) Version        = #1 SMP PREEMPT Wed Dec 12 17:58:11 UTC 2018
2019/02/15 22:08:42 00000000 s     (main) Machine        = armv7l
2019/02/15 22:08:42 00000000 s     (main) creating pidfile /var/run/oscam.pid with pid 18139
2019/02/15 22:08:42 00000000 s   (config) userdb reloaded: 4 accounts loaded, 0 expired, 0 disabled
2019/02/15 22:08:42 00000000 s     (main) signal handling initialized
2019/02/15 22:08:42 00000000 s      (net) newcamd: initialized (fd=5, port=34000)
2019/02/15 22:08:42 00000000 s      (net) -> CAID: 0606 PROVID: 000000
2019/02/15 22:08:42 00000000 s   (reader) ziggosc [mouse] creating thread for device /dev/ttyUSB0
2019/02/15 22:08:42 00000000 s     (stat) loadbalancer: could not open /tmp/.oscam/stat for reading (errno=2 No such file or directory)
2019/02/15 22:08:42 00000000 s     (main) waiting for local card init
2019/02/15 22:08:42 5B2C745C h    (webif) webif: decompressed 178898 bytes back into 441024 bytes
2019/02/15 22:08:42 5B2C745C h    (webif) HTTP Server running. ip=0.0.0.0 port=8888
2019/02/15 22:08:42 42CAD9F4 r   (reader) ziggosc [mouse] Buffers readed  0 bytes total time_us 75136
2019/02/15 22:08:42 42CAD9F4 r   (reader) ziggosc [mouse] Flush readed byte Nr 1 value 3b time_us 3306
2019/02/15 22:08:42 42CAD9F4 r   (reader) ziggosc [mouse] Flush readed byte Nr 2 value 9f time_us 8806
2019/02/15 22:08:42 42CAD9F4 r   (reader) ziggosc [mouse] Flush readed byte Nr 3 value 21 time_us 84
2019/02/15 22:08:42 42CAD9F4 r   (reader) ziggosc [mouse] Flush readed byte Nr 4 value 0e time_us 1288
2019/02/15 22:08:42 42CAD9F4 r   (reader) ziggosc [mouse] Flush readed byte Nr 5 value 49 time_us 1319
2019/02/15 22:08:42 42CAD9F4 r   (reader) ziggosc [mouse] Flush readed byte Nr 6 value 52 time_us 1350
2019/02/15 22:08:42 42CAD9F4 r   (reader) ziggosc [mouse] Flush readed byte Nr 7 value 44 time_us 1316
2019/02/15 22:08:42 42CAD9F4 r   (reader) ziggosc [mouse] Flush readed byte Nr 8 value 45 time_us 88
2019/02/15 22:08:42 42CAD9F4 r   (reader) ziggosc [mouse] Flush readed byte Nr 9 value 54 time_us 1468
2019/02/15 22:08:42 42CAD9F4 r   (reader) ziggosc [mouse] Flush readed byte Nr 10 value 4f time_us 1329
2019/02/15 22:08:42 42CAD9F4 r   (reader) ziggosc [mouse] Flush readed byte Nr 11 value 20 time_us 1325
2019/02/15 22:08:42 42CAD9F4 r   (reader) ziggosc [mouse] Flush readed byte Nr 12 value 41 time_us 1335
2019/02/15 22:08:42 42CAD9F4 r   (reader) ziggosc [mouse] Flush readed byte Nr 13 value 43 time_us 89
2019/02/15 22:08:42 42CAD9F4 r   (reader) ziggosc [mouse] Flush readed byte Nr 14 value 53 time_us 1339
2019/02/15 22:08:42 42CAD9F4 r   (reader) ziggosc [mouse] Flush readed byte Nr 15 value 20 time_us 1344
2019/02/15 22:08:42 42CAD9F4 r   (reader) ziggosc [mouse] Flush readed byte Nr 16 value 56 time_us 1333
2019/02/15 22:08:42 42CAD9F4 r   (reader) ziggosc [mouse] Flush readed byte Nr 17 value 37 time_us 1348
2019/02/15 22:08:42 42CAD9F4 r   (reader) ziggosc [mouse] Flush readed byte Nr 18 value 2e time_us 79
2019/02/15 22:08:42 42CAD9F4 r   (reader) ziggosc [mouse] Flush readed byte Nr 19 value 30 time_us 1342
2019/02/15 22:08:42 42CAD9F4 r   (reader) ziggosc [mouse] Flush readed byte Nr 20 value 9f time_us 1342
2019/02/15 22:08:42 42CAD9F4 r   (reader) ziggosc [mouse] Buffers readed  20 bytes total time_us 107210
2019/02/15 22:08:42 42CAD9F4 r   (reader) ziggosc [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=600, cardmhz=600)
2019/02/15 22:08:43 42CAD9F4 r   (reader) ziggosc [mouse] card detected
2019/02/15 22:08:43 42CAD9F4 r   (reader) ziggosc [mouse] Buffers readed  0 bytes total time_us 75132
2019/02/15 22:08:44 42CAD9F4 r   (reader) ziggosc [mouse] ATR: XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX 
2019/02/15 22:08:44 42CAD9F4 r   (reader) ziggosc [mouse] Buffers readed  0 bytes total time_us 75133
2019/02/15 22:08:45 42CAD9F4 r   (reader) ziggosc [mouse] detect irdeto card
2019/02/15 22:08:45 42CAD9F4 r   (reader) ziggosc [mouse] Irdeto SC 70 version 2 revision 0, patch level 1
2019/02/15 22:08:45 42CAD9F4 r   (reader) ziggosc [mouse] caid: 0606, acs: 0.06, country code: NLD
2019/02/15 22:08:45 42CAD9F4 r   (reader) ziggosc [mouse] providers: 4, ascii serial: ##########, hex serial: ######, hex base: ##
2019/02/15 22:08:49 42CAD9F4 r   (reader) ziggosc [mouse] active providers: 4 (ffffff,ffffff,ffffff,ffffff)
2019/02/15 22:08:49 42CAD9F4 r   (reader) ziggosc [mouse] found card system irdeto
2019/02/15 22:08:49 42CAD9F4 r   (reader) ziggosc [irdeto] THIS WAS A SUCCESSFUL START ATTEMPT No  1 out of max alloted of 1
2019/02/15 22:08:54 42CAD9F4 r   (reader) ziggosc [irdeto] ready for requests
2019/02/15 22:08:55 00000000 s     (main) init for all local cards done
2019/02/15 22:08:55 00000000 s (emmcache) loaded 0 emmcache records from /tmp/.oscam/oscam.emmcache in 0 ms
2019/02/15 22:08:55 00000000 s (emmcache) loaded 0 emmstat records from /tmp/.oscam/oscam.emmstat in 0 ms
2019/02/15 22:08:55 00000000 s (anticasc) anti cascading disabled
2019/02/15 22:08:55 0D115A34 c   (client) plain dvbapi-client granted (anonymous, au=off)
2019/02/15 22:08:55 0D115A34 c   (dvbapi) dvbapi channelcache loaded from /usr/local/etc/oscam.ccache
2019/02/15 22:08:55 0D115A34 c   (dvbapi) Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1 maximum amount of possible filters is 32 (oscam limit is 32)

15 februari 2019

37 minuten geleden zei luisteraar:
kan ook zijn dat je niet alle usb serial modules hebt.

aangezien raspberry gebaseerd is op ubuntu kan je proberen met de volgende opdracht de missing modules te installeren met risico van mislopen 😏
sudo apt-get install linux-image-extra-virtual

resulteert in

root@tvheadend:~# sudo apt-get install linux-image-extra-virtual
Reading package lists... Done
Building dependency tree       
Reading state information... Done
E: Unable to locate package linux-image-extra-virtual

15 februari 2019

Bus 001 Device 006: ID 15f4:0131 HanfTek
      iProduct 2 dvbt2
      iSerial 0
Bus 001 Device 012: ID 0403:6001 Future Technology Devices International, Ltd FT232 USB-Serial (UART) IC
      iProduct 0
      iSerial 0
Bus 001 Device 004: ID 05e3:0608 Genesys Logic, Inc. Hub
      iProduct 1 USB2.0 Hub
      iSerial 0
Bus 001 Device 005: ID 0781:5583 SanDisk Corp.
      iProduct 2 Ultra Fit
      iSerial 3 4C530001011009101472
Bus 001 Device 007: ID 0424:7800 Standard Microsystems Corp.
      iProduct 0
      iSerial 0
Bus 001 Device 003: ID 0424:2514 Standard Microsystems Corp. USB 2.0 Hub
      iProduct 0
      iSerial 0
Bus 001 Device 002: ID 0424:2514 Standard Microsystems Corp. USB 2.0 Hub
      iProduct 0
      iSerial 0
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
      iProduct 2 DWC OTG Controller
      iSerial 1 3f980000.usb

15 februari 2019

root@tvheadend:~# free
              total        used        free      shared  buff/cache   available
Mem:         764720      105856      461596       19568      197268      587072
Swap:             0           0           0

15 februari 2019

Het is een raspberry pi 3b+ met USB installed base

dus boot op de sd

rest op de USB

15 februari 2019

Ik heb inmiddels Smargo card readers mogen ontvangen.

Hij herkent hem als ttyAMA0. Ik krijg onderstaande log.

Dit kreeg ik ook met de vorige kaart lezer... Volgens Ziggo (en de Ziggo selfcare) zijn beide kaarten die ik geprobeerd heb gewoon geactiveerd.

heb ze ook al eens omgedraaid in de lezer...

ik vermoed dat m'n config niet goed is. Ik verwacht dus dat ie een kaart ziet en me op zijn minst output geeft over het kaartnummer...

etc

Kan iemand een 0606 voorbeeld config plaatsen?

-------------------------------------------------------------------------------
>> OSCam <<  cardserver log switched at Fri Feb 15 17:48:47 2019
-------------------------------------------------------------------------------
2019/02/15 17:48:47 00000000 s >> OSCam << cardserver log switched, version 1.20_svn, build r11492 (arm-linux-gnueabihf)
2019/02/15 17:48:47 00000000 s     (main) System name    = Linux
2019/02/15 17:48:47 00000000 s     (main) Host name      = tvheadend
2019/02/15 17:48:47 00000000 s     (main) Release        = 4.14.78-4-osmc
2019/02/15 17:48:47 00000000 s     (main) Version        = #1 SMP PREEMPT Wed Dec 12 17:58:11 UTC 2018
2019/02/15 17:48:47 00000000 s     (main) Machine        = armv7l
2019/02/15 17:48:47 00000000 s     (main) creating pidfile /var/run/oscam.pid with pid 1554
2019/02/15 17:48:47 00000000 s   (config) userdb reloaded: 4 accounts loaded, 0 expired, 0 disabled
2019/02/15 17:48:47 00000000 s     (main) signal handling initialized
2019/02/15 17:48:47 00000000 s      (net) newcamd: initialized (fd=5, port=34000)
2019/02/15 17:48:47 00000000 s      (net) -> CAID: 0606 PROVID: 000000
2019/02/15 17:48:47 00000000 s   (reader) ziggosc [mouse] creating thread for device /dev/ttyAMA0
2019/02/15 17:48:47 00000000 s     (stat) loadbalancer: could not open /tmp/.oscam/stat for reading (errno=2 No such file or directory)
2019/02/15 17:48:47 00000000 s     (main) waiting for local card init
2019/02/15 17:48:47 0E1CFB66 h    (webif) webif: decompressed 178898 bytes back into 441024 bytes
2019/02/15 17:48:47 0E1CFB66 h    (webif) HTTP Server running. ip=0.0.0.0 port=8888
2019/02/15 17:48:47 1C82F814 r   (reader) ziggosc [mouse] Buffers readed  0 bytes total time_us 75131
2019/02/15 17:48:47 1C82F814 r   (reader) ziggosc [mouse] Buffers readed  0 bytes total time_us 75128
2019/02/15 17:48:47 1C82F814 r   (reader) ziggosc [mouse] Reader initialized (device=/dev/ttyAMA0, detect=cd, mhz=600, cardmhz=600)
2019/02/15 17:48:48 1C82F814 r   (reader) ziggosc [mouse] card detected
2019/02/15 17:48:48 1C82F814 r   (reader) ziggosc [mouse] Buffers readed  0 bytes total time_us 75126
2019/02/15 17:48:49 1C82F814 r   (reader) ziggosc [mouse] Buffers readed  0 bytes total time_us 75075
2019/02/15 17:48:50 1C82F814 r   (reader) ziggosc [mouse] Buffers readed  0 bytes total time_us 75128
2019/02/15 17:48:51 1C82F814 r   (reader) ziggosc [mouse] Error activating card.
2019/02/15 17:48:52 1C82F814 r   (reader) ziggosc [mouse] Buffers readed  0 bytes total time_us 75127
2019/02/15 17:48:53 1C82F814 r   (reader) ziggosc [mouse] Buffers readed  0 bytes total time_us 75124
2019/02/15 17:48:54 1C82F814 r   (reader) ziggosc [mouse] Buffers readed  0 bytes total time_us 75129
2019/02/15 17:48:55 1C82F814 r   (reader) ziggosc [mouse] Error activating card.
2019/02/15 17:48:56 1C82F814 r   (reader) ziggosc [mouse] Buffers readed  0 bytes total time_us 75129
2019/02/15 17:48:57 1C82F814 r   (reader) ziggosc [mouse] Buffers readed  0 bytes total time_us 75125
2019/02/15 17:48:59 1C82F814 r        (-) -- Skipped 1 duplicated log lines --

9 februari 2019

Kan iemand me dan een persoonlijk bericht sturen?

9 februari 2019

Heeft iemand een tip? Op welke webshop kan ik die Argolis Smargo het best bestellen?

3 februari 2019

41 minuten geleden zei Mimisiku:

Ik heb hier nog 3 oude V1 versies...

Wat wil je er voor hebben? Heb er 2 nodig...

3 februari 2019

Nogmaals... welke smargo raad je aan 🙂

3 februari 2019

Ja. Raspberry Pi 3b+

Wat heb je gevonden dan?

3 februari 2019

Ja... maar... geinige is dus dat ie ALLEEN die output geeft bij ttyAMA0 en niet ttyUSB0.

waarom?

3 februari 2019

Ik merk trouwens, dat als ik /dev/ttyAMA0 gebruik, en dan i.c.m. *atr = *, dan krijg ik wel een output. Met of zonder kaart overigens.

Gebruik ik /dev/ttyUSB0, ook met *atr =*, gebeurd er niks...

Hier is met ttyAMA0 en atr

2019/02/03 02:19:29 147E5809 h    (webif) HTTP Server running. ip=0.0.0.0 port=8888
2019/02/03 02:19:29 31EC510E r   (reader) ziggosc [mouse] Buffers readed  0 bytes total time_us 75130
2019/02/03 02:19:29 31EC510E r   (reader) ziggosc [mouse] Reader initialized (device=/dev/ttyAMA0, detect=cd, mhz=600, cardmhz=600)
2019/02/03 02:19:30 31EC510E r   (reader) ziggosc [mouse] card detected
2019/02/03 02:19:30 31EC510E r   (reader) ziggosc [mouse] Using ATR from reader config
2019/02/03 02:19:30 31EC510E r   (reader) ziggosc [mouse] ATR: 3B 9F 21 0E 49 52 44 45 54 4F 20 41 43 53 20 56 37 2E 30 9F
2019/02/03 02:19:31 31EC510E r   (reader) ziggosc [mouse] detect irdeto card
2019/02/03 02:19:31 31EC510E r   (reader) ziggosc [mouse] ERROR: not ready to write, timeout=2 ms
2019/02/03 02:19:31 31EC510E r   (reader) ziggosc [mouse] Timeout in IO_Serial_WaitToWrite, delay=0 us, timeout=2232 us
2019/02/03 02:19:31 31EC510E r   (reader) ziggosc [mouse] Warning: needed try nr 2, next ECM has some delay
2019/02/03 02:19:31 31EC510E r   (reader) ziggosc [mouse] ERROR: not ready to write, timeout=2 ms
2019/02/03 02:19:31 31EC510E r   (reader) ziggosc [mouse] Timeout in IO_Serial_WaitToWrite, delay=0 us, timeout=2232 us
2019/02/03 02:19:31 31EC510E r   (reader) ziggosc [mouse] ERROR: not ready to write, timeout=2 ms
2019/02/03 02:19:31 31EC510E r   (reader) ziggosc [mouse] Timeout in IO_Serial_WaitToWrite, delay=0 us, timeout=2232 us
2019/02/03 02:19:31 31EC510E r   (reader) ziggosc [mouse] Warning: needed try nr 2, next ECM has some delay
2019/02/03 02:19:31 31EC510E r   (reader) ziggosc [mouse] ERROR: not ready to write, timeout=2 ms
2019/02/03 02:19:31 31EC510E r   (reader) ziggosc [mouse] Timeout in IO_Serial_WaitToWrite, delay=0 us, timeout=2232 us
2019/02/03 02:19:31 31EC510E r   (reader) ziggosc [mouse] card system not supported
2019/02/03 02:19:31 31EC510E r   (reader) ziggosc [mouse] Normal mode failed, reverting to Deprecated Mode
2019/02/03 02:19:31 31EC510E r   (reader) ziggosc [mouse] Using ATR from reader config
2019/02/03 02:19:31 31EC510E r   (reader) ziggosc [mouse] ATR: 3B 9F 21 0E 49 52 44 45 54 4F 20 41 43 53 20 56 37 2E 30 9F
2019/02/03 02:19:32 31EC510E r   (reader) ziggosc [mouse] detect irdeto card
2019/02/03 02:19:32 31EC510E r   (reader) ziggosc [mouse] ERROR: not ready to write, timeout=1 ms
2019/02/03 02:19:32 31EC510E r   (reader) ziggosc [mouse] Timeout in IO_Serial_WaitToWrite, delay=0 us, timeout=1488 us
2019/02/03 02:19:32 31EC510E r   (reader) ziggosc [mouse] Warning: needed try nr 2, next ECM has some delay
2019/02/03 02:19:32 31EC510E r   (reader) ziggosc [mouse] ERROR: not ready to write, timeout=1 ms
2019/02/03 02:19:32 31EC510E r   (reader) ziggosc [mouse] Timeout in IO_Serial_WaitToWrite, delay=0 us, timeout=1488 us
2019/02/03 02:19:32 31EC510E r   (reader) ziggosc [mouse] ERROR: not ready to write, timeout=2 ms
2019/02/03 02:19:32 31EC510E r   (reader) ziggosc [mouse] Timeout in IO_Serial_WaitToWrite, delay=0 us, timeout=1488 us
2019/02/03 02:19:32 31EC510E r   (reader) ziggosc [mouse] Warning: needed try nr 2, next ECM has some delay
2019/02/03 02:19:32 31EC510E r   (reader) ziggosc [mouse] ERROR: not ready to write, timeout=1 ms
2019/02/03 02:19:32 31EC510E r   (reader) ziggosc [mouse] Timeout in IO_Serial_WaitToWrite, delay=0 us, timeout=1488 us
2019/02/03 02:19:32 31EC510E r   (reader) ziggosc [mouse] card system not supported
2019/02/03 02:19:32 31EC510E r   (reader) ziggosc [mouse] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2019/02/03 02:19:32 31EC510E r   (reader) ziggosc [mouse] card initializing error
2019/02/03 02:19:33 00000000 s     (main) init for all local cards done
2019/02/03 02:19:33 00000000 s (emmcache) loaded 0 emmcache records from /tmp/.oscam/oscam.emmcache in 0 ms
2019/02/03 02:19:33 00000000 s (emmcache) loaded 0 emmstat records from /tmp/.oscam/oscam.emmstat in 0 ms
2019/02/03 02:19:33 00000000 s (anticasc) anti cascading disabled
2019/02/03 02:19:33 06BCC452 c   (client) plain dvbapi-client granted (anonymous, au=off)
2019/02/03 02:19:33 06BCC452 c   (dvbapi) dvbapi channelcache loaded from /usr/local/etc/oscam.ccache
2019/02/03 02:19:33 06BCC452 c   (dvbapi) Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1 maximum amount of possible filters is 32 (oscam limit is 32)

3 februari 2019

2 februari 2019

Welke zou je aanbevelen?

2 februari 2019

dit is geinig: ik heb de kaart er gewoon eens UIT gehaald.

krijg ik nog steeds "card detected" en "error activating card"

2 februari 2019

Ik heb wat zitten klooien. Op MOUSE mode en 5V mode, kwam ik er op eens achter dat ttyUSB0 errors gaf. Hij was plots weg. Ik zag toen een ttyAMA0.

Die in de config gezet. Nu krijg ik dit:

-------------------------------------------------------------------------------
>> OSCam <<  cardserver log switched at Sun Feb  3 00:16:54 2019
-------------------------------------------------------------------------------
2019/02/03 00:16:54 00000000 s >> OSCam << cardserver log switched, version 1.20_svn, build r11478 (arm-linux-gnueabihf)
2019/02/03 00:16:54 00000000 s     (main) System name    = Linux
2019/02/03 00:16:54 00000000 s     (main) Host name      = tvheadend
2019/02/03 00:16:54 00000000 s     (main) Release        = 4.14.78-4-osmc
2019/02/03 00:16:54 00000000 s     (main) Version        = #1 SMP PREEMPT Wed Dec 12 17:58:11 UTC 2018
2019/02/03 00:16:54 00000000 s     (main) Machine        = armv7l
2019/02/03 00:16:54 00000000 s     (main) creating pidfile /var/run/oscam.pid with pid 2655
2019/02/03 00:16:54 00000000 s   (config) userdb reloaded: 4 accounts loaded, 0 expired, 0 disabled
2019/02/03 00:16:54 00000000 s     (main) signal handling initialized
2019/02/03 00:16:54 00000000 s      (net) monitor: initialized (fd=5, port=988)
2019/02/03 00:16:54 00000000 s      (net) newcamd: initialized (fd=6, port=9001)
2019/02/03 00:16:54 00000000 s      (net) -> CAID: 0606 PROVID: 000000
2019/02/03 00:16:54 00000000 s   (reader) ziggosc [mouse] creating thread for device /dev/ttyAMA0
2019/02/03 00:16:54 00000000 s     (main) waiting for local card init
2019/02/03 00:16:54 43BD977E h    (webif) webif: decompressed 178748 bytes back into 440288 bytes
2019/02/03 00:16:54 43BD977E h    (webif) HTTP Server running. ip=0.0.0.0 port=8888
2019/02/03 00:16:54 5E975B4B r   (reader) ziggosc [mouse] Buffers readed  0 bytes total time_us 75124
2019/02/03 00:16:54 5E975B4B r   (reader) ziggosc [mouse] Buffers readed  0 bytes total time_us 75147
2019/02/03 00:16:54 5E975B4B r   (reader) ziggosc [mouse] Reader initialized (device=/dev/ttyAMA0, detect=cd, mhz=600, cardmhz=600)
2019/02/03 00:16:55 5E975B4B r   (reader) ziggosc [mouse] card detected
2019/02/03 00:16:55 5E975B4B r   (reader) ziggosc [mouse] Buffers readed  0 bytes total time_us 75128
2019/02/03 00:16:56 5E975B4B r   (reader) ziggosc [mouse] Buffers readed  0 bytes total time_us 75127
2019/02/03 00:16:58 5E975B4B r        (-) -- Skipped 1 duplicated log lines --
2019/02/03 00:16:58 5E975B4B r   (reader) ziggosc [mouse] Error activating card.
2019/02/03 00:16:59 5E975B4B r   (reader) ziggosc [mouse] Buffers readed  0 bytes total time_us 75131
2019/02/03 00:17:00 5E975B4B r   (reader) ziggosc [mouse] Buffers readed  0 bytes total time_us 75133
2019/02/03 00:17:01 5E975B4B r   (reader) ziggosc [mouse] Buffers readed  0 bytes total time_us 75137
2019/02/03 00:17:02 5E975B4B r   (reader) ziggosc [mouse] Error activating card.
2019/02/03 00:17:03 5E975B4B r   (reader) ziggosc [mouse] Buffers readed  0 bytes total time_us 75122
2019/02/03 00:17:04 5E975B4B r   (reader) ziggosc [mouse] Buffers readed  0 bytes total time_us 75124
2019/02/03 00:17:05 5E975B4B r   (reader) ziggosc [mouse] Buffers readed  0 bytes total time_us 75132
2019/02/03 00:17:06 5E975B4B r   (reader) ziggosc [mouse] Error activating card.
2019/02/03 00:17:07 5E975B4B r   (reader) ziggosc [mouse] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2019/02/03 00:17:07 5E975B4B r   (reader) ziggosc [mouse] card initializing error
2019/02/03 00:17:07 00000000 s     (main) init for all local cards done
2019/02/03 00:17:07 00000000 s (emmcache) loaded 0 emmcache records from /tmp/.oscam/oscam.emmcache in 0 ms
2019/02/03 00:17:07 00000000 s (emmcache) loaded 0 emmstat records from /tmp/.oscam/oscam.emmstat in 0 ms
2019/02/03 00:17:07 00000000 s (anticasc) anti cascading disabled
2019/02/03 00:17:07 6DF7EC95 c   (client) plain dvbapi-client granted (anonymous, au=off)
2019/02/03 00:17:07 6DF7EC95 c   (dvbapi) dvbapi channelcache loaded from /usr/local/etc/oscam.ccache
2019/02/03 00:17:07 6DF7EC95 c   (dvbapi) Using TCP listen socket, API forced to DVBAPIv3 (0), userconfig boxtype: 11
2019/02/03 00:17:07 20501A8D c  (newcamd) client connected to 9001 port
2019/02/03 00:17:07 4876D427 c        (-) -- Skipped 1 duplicated log lines --
2019/02/03 00:17:07 4876D427 c   (client) anonymous disconnected from 127.0.0.1
2019/02/03 00:17:07 20501A8D c   (client) encrypted newcamd:9001-client 127.0.0.1 granted (user1, au=off)
2019/02/03 00:17:07 20501A8D c  (newcamd) user user1 authenticated successfully (Tvheadend)
2019/02/03 00:17:07 20501A8D c  (newcamd) AU disabled for user user1

Hoe activeer ik die kaart? Enkel en alleen in de HUMAX van Ziggo?

En zo ja, wat moet ik dan doen? Er in steken, op laten starten, thats it?

2 februari 2019

Op de advertentie staat overigens dat dit ook een Smargo card reader is...

2 februari 2019

Welke cardreaders beveel je aan? Ik heb overigens een gratis antwoordnummer als je overtollige troep wilt opsturen 😉

Dit vind ik trouwens in dmesg:

[ 7.685985] usbcore: registered new interface driver ftdi_sio
[ 7.686060] usbserial: USB Serial support registered for FTDI USB Serial Device
[ 7.686217] ftdi_sio 1-1.2:1.0: FTDI USB Serial Device converter detected
[ 7.686362] usb 1-1.2: Detected FT232RL
[ 7.691949] usb 1-1.2: FTDI USB Serial Device converter now attached to ttyUSB0
[ 7.763342] sd 0:0:0:0: Attached scsi generic sg0 type 0

[    7.685985] usbcore: registered new interface driver ftdi_sio
[    7.686060] usbserial: USB Serial support registered for FTDI USB Serial Device
[    7.686217] ftdi_sio 1-1.2:1.0: FTDI USB Serial Device converter detected
[    7.686362] usb 1-1.2: Detected FT232RL
[    7.691949] usb 1-1.2: FTDI USB Serial Device converter now attached to ttyUSB0
[    7.763342] sd 0:0:0:0: Attached scsi generic sg0 type 0

dat sg0 device... is dat niet wat?

2 februari 2019

Ha, ik deze vrieskou?... 😉

Ik vraag me af waar die 3.3V / 5V switch voor is.

Staat nu op 3.3V

kan het kwaad om die om te zetten?

2 februari 2019

32 minuten geleden zei Mimisiku:

Waar woont de TS helemaal.... Heb ik nog een stuk of 3 Smargo's liggen...

Maastricht

2 februari 2019

Die reader heeft ook een 3.3 of 5V switch

wellicht moet daar iets mee?

2 februari 2019

Vraag: wordt de kaart ook gelezen als tvheadend dat niet doet?

ik doel dus op oscam initialisatie, bij boot

Inloggen

rotewerken

Items

Registratiedatum

Laatst bezocht

Inhoudstype

Profielen

Forums

Store

Berichten die geplaatst zijn door rotewerken

OSCAM en nieuwe (2019) Ziggo smartcard

OSCAM en nieuwe (2019) Ziggo smartcard

OSCAM en nieuwe (2019) Ziggo smartcard

OSCAM en nieuwe (2019) Ziggo smartcard

OSCAM en nieuwe (2019) Ziggo smartcard

OSCAM en nieuwe (2019) Ziggo smartcard

OSCAM en nieuwe (2019) Ziggo smartcard

OSCAM en nieuwe (2019) Ziggo smartcard

OSCAM en nieuwe (2019) Ziggo smartcard

OSCAM en nieuwe (2019) Ziggo smartcard

OSCAM en nieuwe (2019) Ziggo smartcard

OSCAM en nieuwe (2019) Ziggo smartcard

OSCAM en nieuwe (2019) Ziggo smartcard

OSCAM en nieuwe (2019) Ziggo smartcard

OSCAM en nieuwe (2019) Ziggo smartcard

OSCAM en nieuwe (2019) Ziggo smartcard

OSCAM en nieuwe (2019) Ziggo smartcard

OSCAM en nieuwe (2019) Ziggo smartcard

OSCAM en nieuwe (2019) Ziggo smartcard

OSCAM en nieuwe (2019) Ziggo smartcard

OSCAM en nieuwe (2019) Ziggo smartcard

OSCAM en nieuwe (2019) Ziggo smartcard

OSCAM en nieuwe (2019) Ziggo smartcard

OSCAM en nieuwe (2019) Ziggo smartcard

OSCAM en nieuwe (2019) Ziggo smartcard

Overig

Activiteit