Ga naar inhoud


Vogelaar

Lid
 Bekijk profiel  Bekijk hun activiteit

  • Items

    431

  • Registratiedatum

  • Laatst bezocht

  • Dagen gewonnen

    3

 Inhoudstype 

Berichten die geplaatst zijn door Vogelaar

    wce1.15

    in Overige merken

    Geplaatst:

    WCE is een proggie dat op een pc of laptop een codering emuleerd.

    Je verbind de pc of laptop via de seriele poort met een season interface met je humax.

    Die season interface is een soort kaart die je in de interne irdeto slot van je humax stopt.

    Je heb dus geen aparte CI Cams nodig.(kan wel)

    In je humax moet je wel bij TOH-- config --Caid preselect-- op cas 1 zetten

    Dit is in het kort hoe het werkt

    Nieuwe versies WCE

    in CI, CI+, (soft)cams en smartcards

    Geplaatst:

    WCE 1.15

     

    Sky italy 0070 works <img src="/ubbthreads/images/graemlins/smile.gif" alt="" />

     

    A big THANK YOU to our italian friends that helped with

    the algo and to those that did the translations to english.

    If it where not for them this version would not have been possible

    and we would still have black screens <img src="/ubbthreads/images/graemlins/frown.gif" alt="" />)

     

    Modifications to seca code, various bugs fixed.

     

    /Gunnar

     

    [color:"red"] volgende keer in het nederlands of een vertaling erbij zetten graag.niet iedereen is de engelse taal machtig.and this is a dutch board <img src="/ubbthreads/images/graemlins/wink.gif" alt="" /> [/color]

    620603-wce115.zip

    nieuwe firmware van TOH-HOT

    in Overige merken

    Geplaatst:

    Staat in de readme

     

    You can choice your preferred channel on Power On

    Access to Parser Module without crash

    Qme Module ToH20 full included...

    ...may be cause crash on some channels

    Time Align Module by QME5400 included...

    ...set current time on current service without move motor

    Access to Antenna's menu directly

    One Touch for Favourites Section

    Info about HoT version plugged

    Other...

    Heb de macrotable in de bijlage gezet.

    617195-Macro_Table_by_M@X1970_v3[1].5HoT.zip

    humax toolbox 1.18

    in Overige merken

    Geplaatst:

    En weer een nieuwe versie van Humax Toolbox 1.21 By MrDude

     

    What's new?

     

    Firmware Tools:

    Humax Uploader 1.5 - (Used To upload New Firmware to your Humax)-(With Help files+ HOT emu firmware file).

    Background Patcher 2.1 - (Use this to Change the Background on your Humax Firmware)

    Humax Icon Patcher 1.3 - (Use this to change the Icons on your Humax Firmware)

    Humax Macro Editor 1.5 - (Make your own macro keys and the upload them with Humax Uploader 1.5)

    HDF Tool GUI Pro1.1.2 build 79 – (Unpack your firmware, modify it, then repack with this tool) (NOT for beginners)

    Humax Location Finder1.0.3 Build 43 - (Use this for comparing raw files from unpacked firmware) (Developers tool)

    HBuilder.exe, HDeBuilder.exe, MIPSDis.exe, HB_HDB_UserGuide.pdf – (Firmware Development Tools)

    Humfont 1.2 – (Lets you edit the font from the firmware raw files)

     

     

    Key Downloader’s:

    Nagra Fishing (Use this to download the latest nagra keys - requires an Internet connection)

    Downloader 2.7 (Use this to download the latest Keys - requires an Internet connection)

     

    Card Editors/Programs:

    Multiprog 1.61 (use this with an Elvis programmer to program your cards)

    Picbined 1.82 (This is Funcard, Silvercard (Ds9) and WCE hex key editor)

    Fun Key Edit1.41 (Use this for making Hex files for your Funcards)

    The Mighty Bosom 1.8.4 (The latest editor for Titanium cards Hex)

     

    STB Key Editors:

    DSR 9500 EMU Ed30/1 (Upload new keys to your Humax with this tool)

    DSR 9500 EMU Edit (Lets you convert normal fun6in1 files to use with Dsr9500EmuEd)

    Humax 5400 Eeprom Editor (HEE - can be used to program a funcard inside your humax card slot - requires a Null modem cable)

     

    Card Emulators:

    WCE 1.13 (latest smart card emulator - capable of emulating all know cracked encryptions - requires a Season interface)

    Emulatorek 10a (Smart card emulator - capable of emulating all know cracked encryptions except seca 2 - requires a season interface)

    Wallbanger3.99 (Smart card emulator - capable of emulating all know cracked encryptions except seca 2, Conax and MEMC - requires a season Interface)

     

    Channel Editors:

    XOak 1.17 (use to save, edit and upload channels to your humax - allows you to save your antenna positions)

    Humbox 4.1 (use to save, edit and upload channels to your humax - more stable than Xoak, but does not allow you to save antenna Positions)

     

    Hex Tools:

    SwapBinHex (lets you convert between bin and hex files)

    Hex 2 Dat 1.3 (Convert Hex files to Dat files - Use this for making dat files for WCE)

     

    STB Tools:

    PMC Tool (New PMC tool to Edit and Upload new PMC tables to your Humax - requires a null modem cable)

    Pmct2Csv 1.0 (Lets you edit your HDF files to CSV format)

    Humax System ID (If you have corrupted your humax system ID or want to change it - you can repair or change it with this tool)

    Card Server 1.5 beta 3.2 (For users with original cards - allows you to share with a friend - Requires an Internet connection)

    Humax Remote Control 2.5 (If you have lost or broken your Remote for your Humax - you can control it with this tool - requires a Null Modem cable)

     

    This Interface also contains a Weblinks Page that you can edit yourself.

     

    Disclaimer

    Remember this toolbox is not to be used to watch Sat TV without a subscription - this toolbox only acts as an interface so you can launch

    All your favourite applications for the humax easily and does away with the need to install each item individually.

    Please don't post stupid questions on satdudez about not being able to watch this or that – Do NOT mess around with the settings, (apart From the comport settings), everything is set up so it will work already in your humax using comport 1 - do not mess around with baud Rates or anything else - or you will not get your appz working properly. If you have a problem running WCE for example - try pulling the season interface out the humax and then re-inserting it or turn the humax off at the wall to reset the internal cam (If pressing 0+ rcl fails).

     

    Download here:

    http://www.dudewarez.pwp.blueyonder.co.uk/downloads/HumaxToolbox.zip

     

    Denk eraan dat je de oude versie van toolbox eerst verwijderd.

    .bin bestanden...?

    in Overige merken

    Geplaatst:

    Die moet je rechtstreeks in de emu zetten.

    Dat doe je met het proggie DSR9500 emu ed3.0

    Zorg er wel voor dat je humax aanstaat als je de .bin file erin zet. Als die daar mee klaar is, moet je de humax even op standby zetten en weer aan omdat dan pas de .bin in de emu wordt weg geschreven.

    humax toolbox 1.18

    in Overige merken

    Geplaatst:

    Nieuwe versie van toolbox 1.20

    Hier te downloaden

     

    http://www.dudewarez.pwp.blueyonder.co.uk/downloads/HumaxToolbox.zip

     

    Humax Toolbox 1.20 By MrDude

     

    What's new ?

     

    Firmware Tools:

    Humax Uploader 1.5 - Used To upload New Firmware to your Humax (With Help files+ HOT emu the firmware file).

    Background Patcher 2.1 - Use this to Change the Background on your Humax Firmware

    Humax Icon Patcher 1.3 - Use this to change the Icons on your Humax Firmware

    Humax Macro Editor 1.5 - Make Your own macro keys and the upload them with Humax Uploader 1.5

    HDF Tool GUI Pro1.1.0 build 71 - Unpack your firmware, modify it, then repack with this tool (NOT for beginers)

    Humax Location Finder1.0.3 Build 43 - Use this for comparing raw files from unpacked firmware (Developers tool)

    HBuilder.exe, HDeBuilder.exe, MIPSDis.exe, HB_HDB_UserGuide.pdf - Firmware Development Tools

     

    Key Downloaders:

    Nagra Fishing (Use this to download the latest nagra keys - requires an Internet connection)

    Downloader 2.7 (Use this to download The latest Keys - requires an Internet connection)

     

    Card Editors/Programs:

    Multiprog 1.61 (use this with an Elvis programmer to program your cards)

    Picbined 1.82 (This is Funcard,Silvercard(Ds9) and WCE hex key editor+ Hot 1.2/3 Raw module editor)

    Fun Key Edit1.41 (Use this for making Hex files for your Funcards)

    The Mighty Bosom 1.8.4 (The latest editor for Titanium cards Hex)

     

    STB Key Editors

    DSR 9500 EMU Ed30/1 (Upload new keys to your Humax with this tool)

    DSR 9500 EMU Edit (Lets you convert normal fun6in1 files to use with Dsr9500EmuEd)

    Humax 5400 Eeprom Editor (HEE - can be used to program a funcard inside your humax card slot - requires a Null modem cable)

     

    Card Emulators:

    WCE 1.13 (latest smart card emulator - capable of emulating all know cracked encryptions - requires a season interface)

    Emulatorek 10a (Smart card emulator - capable of emulating all know cracked encryptions except seca 2 - requires a season interface)

    Wallbanger3.99 (Smart card emulator - capable of emulating all know cracked encryptions except seca 2, Conax and MEMC - requires a season interface)

     

    Channel Editors:

    XOak 1.17 (use to save, edit and upload channels to your humax - allows you to save your antenna positions)

    Humbox 4.1 (use to save, edit and upload channels to your humax - more stable than Xoak, but does not allow you to save antenna positions)

     

    Hex Tools:

    SwapBinHex (lets you convert between bin and hex files)

    Hex 2 Dat 1.3 (Convert Hex files to Dat files - Use this for making dat files for WCE 1.10)

     

    STB Tools:

    PMC Tool (New PMC tool to Edit and Upload new PMC tables to your Humax - requires a null modem cable)

    PMC Edit ToH 2.0 (Edit and Upload new PMC tables to your Humax - requires a null modem cable)

    Pmct2Csv 1.0 (Lets you edit your HDF files to CSV format)

    Humax System ID (If you have corrupted your humax system ID or want to change it - you can repair or change it with this tool)

    Card Server 1.5 beta 3.2 (For users with original cards - allows you to share with a friend - Requires an Internet connection)

    Humax Remote Control 2.5 ( If you have lost or Broken your Remote for your Humax - you can control it with this tool - requires a Null modem cable)

    wavefrontier T90 instellingen

    in Schotelpark

    Geplaatst:

    Heb vandaag een wavefrontier T90 geplaatst, en ik moet zeggen met die sheet van holles was het HEEL erg simpel.

    Bij elke LNB die ik in de T90 hing was het gelijk BINGO.

    Klein beetje fijntunen en dat was het.

     

    Dus HOLLES hartelijk bedankt voor dat perfecte stuk software.

    Humax 5400 Cleaner

    in Overige merken

    Geplaatst:

    This is to restore your Humax5400 back to the original state, removing all patches and channel settings in one file - This file is only valid for a stb with the following.

     

    Loader - H2.08 (0016.0600) - DO NOT USE ON ANY OTHER MODEL

     

    If you want to restore back to factory defaults - this is the only file that will clear all known TOH-HOT patches and channel settings / keys and put all original firmware/loader back on.

     

    All files have been modified with All byte values in hex 00 - apart from the original humax raw files.

     

    by MrDude.

     

    Kan het zelf niet testen heb een andere loader versie(1.37)

     

    LET OP gebruik dit alleen als je Loader H2.08 (0016.0600)in je humax heb zitten

    607302-5400Cleaner.zip

    Nieuwe versies WCE

    in CI, CI+, (soft)cams en smartcards

    Geplaatst:

    Opmerking van de maker van WCE 1.13

     

    1.13 is not a released version, it's an intermediate debug-session file still in progress trying to solve a seca problem on xsat 310 receiver..and that problem isn't solved yet, so 1.13 is no improvement over 1.12, and the possibility of it containg more bugs than 1.12 is HIGH

     

    Dus nog maar ff met 1.12 verder stoeien.

×
×
  • Nieuwe aanmaken...