Extreem veel EMM's sinds 20/09/09

[Sateetje]

Is het meer mensen opgevallen dat bij Ziggo de EMM's nu extreem vaak verstuurd worden:

 

[ 20:08:54 ] [ Irdeto ] Card AU on reader 0 (Ziggo (COM1)) was not successfull

[ 20:08:54 ] [ Irdeto ] emmok: 0 data00:C0 providerID:00

[ 20:08:54 ] [ Irdeto ] Card AU on reader 0 (Ziggo (COM1)) was not successfull

[ 20:08:54 ] [ Irdeto ] emmok: 0 data00:02 providerID:00

[ 20:08:56 ] [ Irdeto ] Card AU on reader 0 (Ziggo (COM1)) was successfull

[ 20:08:56 ] [ Irdeto ] emmok: 1 data00:02 providerID:00

[ 20:08:56 ] [ Irdeto ] Card AU on reader 0 (Ziggo (COM1)) was not successfull

[ 20:08:56 ] [ Irdeto ] emmok: 0 data00:C0 providerID:00

[ 20:08:56 ] [ Irdeto ] Card AU on reader 0 (Ziggo (COM1)) was not successfull

[ 20:08:56 ] [ Irdeto ] emmok: 0 data00:C0 providerID:00

[ 20:09:01 ] [ Irdeto ] Card AU on reader 0 (Ziggo (COM1)) was not successfull

[ 20:09:01 ] [ Irdeto ] emmok: 0 data00:C0 providerID:00

 

Waarom zouden ze dit doen? Het was al veel, maar nu echt inmens

[Rigolo]

ik denk om softcam's zoals NewCS en CCcam te frustreren?

 

Mijn NewCS trekt het nog wel, maar het geheugen gebruik van NewCS is niet helemaal ideaal blijkbaar, waardoor langzaam mijn geheugen begint vol te lopen. En als deze helemaal volloopt wordt NewCS gekilled.

 

 

[DRG]

NewCS 1.61 en hoger heeft een speciale C0 blocker

 

Ik zou zeggen doen... err inschakelen

[dream-on]

is er ook zoiets voor CCcam?

heb de config eens doorgelezen, er zijn verschillende emm instellinstellingen, maar welke de juiste is.......?

[DRG]

las net een stukje waarbij de het hadden over de GA blocken, hierin zitten ook de C0's alleen zou dan ook de maandelijkse update van de smartcard geblockt worden.

of dit ook bij Ziggo het geval is weet ik niet.

 

[dream-on]

vlgs mij moet de ziggo kaart elke paar minuten worden geupdate.

of vergis is me nu sterk?

[DRG]

volgens mij was die interval 40 minuten (emm), de keyupdate voor het beeld is 25 seconde(ecm).

( je kan alle EMM's blocken en dan weet je het direct )

 

De EMM updates zijn er in 3 gradaties wat ik zo lees.

 

configure what EMM blocker you want. Add as many as readers you have attached

# default is blocking nothing

#

# B: /dev/sci0 01

# 00 - nothing

# 01 - sa blocked

# 02 - ua blocked

# 04 - ga blocked

 

[dream-on]

ja dat las ik ook. Maar waarvoor dient nu wat?

in de cfg staan 4 blokken:

1:

# configure what EMM blocker you want. Add as many as readers you have attached

# default is blocking nothing

#

# B: /dev/sci0 01

# 00 - nothing

# 01 - sa blocked

# 02 - ua blocked

# 04 - ga blocked

# and sum of for combinations

#

#examples

#

#B: /dev/tts/0 07

#B: /dev/sci0 01

 

2:

# disable all local EMM readers

# saves lots of CPU, but you won't get any updates anymore

# (unless you get updates from your clients)

#

# default: no

#

#DISABLE EMM : yes

 

3:

# with this setting you can

# allow a client on two hops away

# to send the updates to the cardserver

#

# default : no

#

#EXTRA EMM LEVEL : yes

 

4.

# with this setting you can

# configure how many emm listeners are started.

# for example use 2 when recording

# and viewing different systems and both need constant updates

#

# default : 1

#

#EMM THREADS : 1

 

blok 1 weet ik niet wat wat is...

Blok 2 heb ik getest, hij telt gewoon verder (dus emm's lopen op).

Blok 3 en 4 lijkt me niet zinvol..

[Sateetje]

Ook traag zappen in originele ontvanger?!?

 

Wat zijn die gasten aan het doen?

 

Ze gaan helemaal los daar (2 systemen die de kaart updaten):

 

[ 20:53:01 ] [ Irdeto ] Card AU on reader 0 (Ziggo on COM1) was not successfull

[ 20:53:01 ] [ Irdeto ] emmok: 0 data00:D8

[ 20:53:01 ] [ Irdeto ] Card AU on reader 0 (Ziggo on COM1) was not successfull

[ 20:53:01 ] [ Irdeto ] emmok: 0 data00:C8

[ 20:53:02 ] [ Irdeto ] Card AU on reader 0 (Ziggo on COM1) was not successfull

[ 20:53:02 ] [ Irdeto ] emmok: 0 data00:E0

[ 20:53:02 ] [ Irdeto ] Card AU on reader 0 (Ziggo on COM1) was not successfull

[ 20:53:02 ] [ Irdeto ] emmok: 0 data00:C0

[ 20:53:02 ] [ Irdeto ] Card AU on reader 0 (Ziggo on COM1) was not successfull

[ 20:53:02 ] [ Irdeto ] emmok: 0 data00:E0

[ 20:53:02 ] [ Irdeto ] Card AU on reader 0 (Ziggo on COM1) was not successfull

[ 20:53:02 ] [ Irdeto ] emmok: 0 data00:C0

[ 20:53:02 ] [ Irdeto ] Card AU on reader 0 (Ziggo on COM1) was not successfull

[ 20:53:02 ] [ Irdeto ] emmok: 0 data00:C8

[ 20:53:03 ] [ Irdeto ] Card AU on reader 0 (Ziggo on COM1) was not successfull

[ 20:53:03 ] [ Irdeto ] emmok: 0 data00:C8

[ 20:53:03 ] [ Irdeto ] Card AU on reader 0 (Ziggo on COM1) was not successfull

[ 20:53:03 ] [ Irdeto ] emmok: 0 data00:D8

[ 20:53:03 ] [ Irdeto ] Card AU on reader 0 (Ziggo on COM1) was not successfull

[ 20:53:03 ] [ Irdeto ] emmok: 0 data00:D8

[ 20:53:03 ] [ Irdeto ] Card AU on reader 0 (Ziggo on COM1) was successfull

[ 20:53:03 ] [ Irdeto ] emmok: 1 data00:02

[ 20:53:03 ] [ Irdeto ] Card AU on reader 0 (Ziggo on COM1) was not successfull

[ 20:53:03 ] [ Irdeto ] emmok: 0 data00:C8

[ 20:53:04 ] [ Irdeto ] Card AU on reader 0 (Ziggo on COM1) was not successfull

[ 20:53:04 ] [ Irdeto ] emmok: 0 data00:E0

[ 20:53:04 ] [ Irdeto ] Card AU on reader 0 (Ziggo on COM1) was not successfull

[ 20:53:04 ] [ Irdeto ] emmok: 0 data00:E0

[ 20:53:04 ] [ Irdeto ] Card AU on reader 0 (Ziggo on COM1) was not successfull

[ 20:53:04 ] [ Irdeto ] emmok: 0 data00:C0

[ 20:53:04 ] [ Irdeto ] Card AU on reader 0 (Ziggo on COM1) was not successfull

[ 20:53:04 ] [ Irdeto ] emmok: 0 data00:C0

[ 20:53:05 ] [ Irdeto ] Card AU on reader 0 (Ziggo on COM1) was not successfull

[ 20:53:05 ] [ Irdeto ] emmok: 0 data00:C8

[ 20:53:05 ] [ Irdeto ] Card AU on reader 0 (Ziggo on COM1) was not successfull

[ 20:53:05 ] [ Irdeto ] emmok: 0 data00:C8

[ 20:53:05 ] [ Irdeto ] Card AU on reader 0 (Ziggo on COM1) was not successfull

[ 20:53:05 ] [ Irdeto ] emmok: 0 data00:D8

[ 20:53:05 ] [ Irdeto ] Card AU on reader 0 (Ziggo on COM1) was not successfull

[ 20:53:05 ] [ Irdeto ] emmok: 0 data00:D8

[ 20:53:05 ] [ Irdeto ] Card AU on reader 0 (Ziggo on COM1) was not successfull

[ 20:53:05 ] [ Irdeto ] emmok: 0 data00:D8

 

[Catastrofus]

 

Gaat nu (vandaag) eigenlijk wel weer goed, althans beter dan gisteren.

 

Gert.

 

[DRG]

ik zie precies hetzelfde... ik heb newcs tussen de smartcard en CCcam gezet om iig de C0's te kunnen blocken..

 

zouden ze alle kabelnetten (@home,Casema enz)gekoppeld hebben aan 1 coderingssysteem ?

 

[ 16:04:29 ] [ Irdeto ] emmok: 0 data00:D8 providerID:30

[ 16:04:30 ] [ Irdeto ] Card AU on reader 0 (Phoenix S0) was not successfull

[ 16:04:30 ] [ Irdeto ] emmok: 0 data00:D8 providerID:30

[ 16:04:30 ] [ Irdeto ] Card AU on reader 0 (Phoenix S0) was not successfull

[ 16:04:30 ] [ Irdeto ] emmok: 0 data00:E0 providerID:00

[ 16:04:30 ] [ Irdeto ] Card AU on reader 0 (Phoenix S0) was not successfull

[ 16:04:30 ] [ Irdeto ] emmok: 0 data00:E0 providerID:00

[ 16:04:32 ] [ Irdeto ] Card AU on reader 0 (Phoenix S0) was not successfull

[ 16:04:32 ] [ Irdeto ] emmok: 0 data00:C0 providerID:00

[ 16:04:32 ] [ Irdeto ] Card AU on reader 0 (Phoenix S0) was not successfull

[ 16:04:32 ] [ Irdeto ] emmok: 0 data00:C0 providerID:00

[ 16:04:32 ] [ Irdeto ] Card AU on reader 0 (Phoenix S0) was not successfull

[ 16:04:32 ] [ Irdeto ] emmok: 0 data00:C8 providerID:10

[ 16:04:33 ] [ Irdeto ] Card AU on reader 0 (Phoenix S0) was not successfull

[ 16:04:33 ] [ Irdeto ] emmok: 0 data00:C8 providerID:10

[ 16:04:33 ] [ Irdeto ] Card AU on reader 0 (Phoenix S0) was not successfull

[ 16:04:33 ] [ Irdeto ] emmok: 0 data00:D8 providerID:30

[ 16:04:33 ] [ Irdeto ] Card AU on reader 0 (Phoenix S0) was not successfull

[ 16:04:33 ] [ Irdeto ] emmok: 0 data00:D8 providerID:30

[ 16:04:33 ] [ Irdeto ] Card AU on reader 0 (Phoenix S0) was not successfull

[ 16:04:33 ] [ Irdeto ] emmok: 0 data00:E0 providerID:00

[ 16:04:34 ] [ Irdeto ] Card AU on reader 0 (Phoenix S0) was not successfull

 

[MrScratch]

Moet je daar iets van merken? Ik heb met mijn dm500c en dm7025c nog niets opgemerkt. Beiden maken contact met cccam op de 7025. Ik moet wel zeggen dat ik nog niet in logs ofzo heb gekeken.

[Jassy]

Sinds dat jullie dit probleem melden begint hier de gecertificeerde Samsung 850PVR ongelofelijk te steigeren. Opnames zijn niet meer te bekijken doordat het beeld telkens verspringt. Soms enkele seconden, soms wel een half uur vooruit! Ook het zappen gaat vreselijk langzaam.

 

De thread is hier te lezen

[DRG]

kijk maar eens in de webinterface van CCcam, je zult zien dat er meer EMM's (kaartupdates) zijn dan ECM's (beelddecodering)

normaal http://boxipadres:16001

 

Code:

+---------+---------------+------------+------------+-----------+---------------+--------+----------------------+| Username| Host          | Connected  | Idle time  | ECM       | EMM           | Version| Last used share      |+---------+---------------+------------+------------+-----------+---------------+--------+----------------------+|dm800    |192.168.1.100  |01d 16:36:23|00d 00:00:21|6009 (5986)|300816 (300659)|2.1.2   | Nederland 2 (ok)     |+---------+---------------+------------+------------+-----------+---------------+--------+----------------------+

 

[JeWeetWelWie]

Bij mij is er eigenlijk niet bijzonders aan de hand.

 

Kijk maar naar mijn log.

*************************************************************

[ 19:47:47 ] [ Loader ] Starting Newcamd Server on port XXXX

[ 19:47:47 ] [ NewCS ] Ready to GO!

/var # [ 19:47:47 ] [ Newcamd:XXXX ] User box33 logged in, client: Mgcamd

[ 19:47:47 ] [ Newcamd:XXXX ] User box58 logged in, client: Generic

[ 19:47:48 ] [ Newcamd:XXXX ] User box17 logged in, client: Mgcamd

[ 19:47:49 ] [ Newcamd ] ECM -> box58 (OK)

[ 19:47:51 ] [ Newcamd ] ECM -> box17 (NOT OK)

[ 19:47:52 ] [ Newcamd ] ECM -> box17 (OK)

[ 19:48:07 ] [ Newcamd ] ECM -> box58 (OK)

[ 19:48:08 ] [ Newcamd ] ECM -> box17 (OK)

[ 19:48:28 ] [ Newcamd ] ECM -> box58 (OK)

[ 19:48:29 ] [ Newcamd ] ECM -> box17 (OK)

[ 19:48:44 ] [ Newcamd ] ECM -> box33 (NOT OK)

[ 19:48:44 ] [ Newcamd ] ECM -> box33 (OK)

[ 19:48:49 ] [ Newcamd ] ECM -> box33 (OK)

[ 19:48:49 ] [ Newcamd ] ECM -> box58 (OK)

[ 19:48:50 ] [ Newcamd ] ECM -> box17 (OK)

[ 19:49:10 ] [ Newcamd ] ECM -> box33 (OK)

[ 19:49:10 ] [ Newcamd ] ECM -> box58 (OK)

[ 19:49:11 ] [ Newcamd ] ECM -> box17 (OK)

[ 19:49:31 ] [ Newcamd ] ECM -> box33 (OK)

[ 19:49:31 ] [ Newcamd ] ECM -> box58 (OK)

[ 19:49:32 ] [ Newcamd ] ECM -> box17 (OK)

[ 19:49:46 ] [ Newcamd ] ECM -> box33 (OK)

[ 19:49:52 ] [ Newcamd ] ECM -> box58 (OK)

[ 19:49:52 ] [ Newcamd ] ECM -> box33 (OK)

[ 19:49:53 ] [ Newcamd ] ECM -> box17 (OK)

[ 19:50:13 ] [ Newcamd ] ECM -> box58 (OK)

[ 19:50:13 ] [ Newcamd ] ECM -> box33 (OK)

[ 19:50:14 ] [ Newcamd ] ECM -> box17 (OK)

[ 19:50:34 ] [ Newcamd ] ECM -> box58 (OK)

[ 19:50:34 ] [ Newcamd ] ECM -> box33 (OK)

[ 19:50:35 ] [ Newcamd ] ECM -> box17 (OK)

[ 19:50:55 ] [ Newcamd ] ECM -> box58 (OK)

[ 19:50:55 ] [ Newcamd ] ECM -> box33 (OK)

[ 19:50:56 ] [ Newcamd ] ECM -> box17 (OK)

[ 19:51:16 ] [ Newcamd ] ECM -> box58 (OK)

[ 19:51:16 ] [ Newcamd ] ECM -> box33 (OK)

[ 19:51:17 ] [ Newcamd ] ECM -> box17 (OK)

*************************************************************

 

Box 17 en 58 draaien bij mij thuis in het oude Multikabel gebied en box33 draait in het Casema gebied.

 

Gewoon ongeveer iedere 21 seconden een puls.

 

Ik hoop dat ze hier niet beginnen.