Ga naar inhoud

beeld bevriest random


 Delen
Volgers 2

Aanbevolen berichten

nieuwe oscam installatie

tuner is HomeRun via TVHeadend op nas

Cardreader is via Raspberry Pi (buster) met oscam

Kaartlezer is TBS3102 5 Crystal Smartmouse. Schakelaars staan op 5V / Phoenix / 3.579MHz / 6MHz.

Provider = Zigo, 5555 voor alle HD zenders

In TvHeadend met kodi kan ik alle zenders bekijken, alleen alle gecodeerde zenders stoppen na een random tijd. De overige FTA werken allen wel goed.

 

oscam.version

Unix starttime: 1610014229
Starttime:      07.01.2021 11:10:29
Version:        oscam-1.20_svn-r11678
Compiler:       arm-linux-gnueabihf
Box type:       generic (generic)
PID:            895
TempDir:        /tmp/.oscam
GBox tmp_dir:   not defined using: /tmp/.oscam
ConfigDir:      /usr/local/etc/
WebifPort:      8888

Web interface support:                   yes
LiveLog support:                         yes
jQuery support intern:                   yes
Touch interface support:                 no
SSL support:                             no
DVB API support:                         yes
DVB API with AZBOX support:              no
DVB API with MCA support:                no
DVB API with COOLAPI support:            no
DVB API with COOLAPI2 support:           no
DVB API with STAPI support:              no
DVB API with STAPI5 support:             no
DVB API with NEUTRINO support:           no
DVB API read-sdt charsets:               yes
Irdeto guessing:                         yes
Anti-cascading support:                  yes
Debug mode:                              yes
Monitor:                                 yes
Loadbalancing support:                   yes
Cache exchange support:                  no
Cache exchange AIO support:              no
CW Cycle Check support:                  no
LCD support:                             no
LED support:                             no
Clockfix with realtime clock:            no
IPv6 support:                            no

camd 3.3x:                               no
camd 3.5 UDP:                            yes
camd 3.5 TCP:                            yes
newcamd:                                 yes
CCcam:                                   yes
CCcam share:                             yes
gbox:                                    yes
radegast:                                no
scam:                                    yes
serial:                                  no
constant CW:                             no
Pandora:                                 no
ghttp:                                   no

Reader support:                          yes

Nagra:                                   yes
Nagra Merlin:                            yes
Irdeto:                                  yes
Conax:                                   yes
Cryptoworks:                             no - no EMM support!
Seca:                                    yes
Viaccess:                                yes
NDS Videoguard:                          yes
DRE Crypt:                               yes
TONGFANG:                                yes
Bulcrypt:                                yes
Griffin:                                 yes
DGCrypt:                                 yes

cardreader_phoenix:                      yes
cardreader_drecas:                       no
cardreader_internal_azbox:               no
cardreader_internal_coolapi:             no
cardreader_internal_coolapi2:            no
cardreader_internal_sci:                 yes
cardreader_sc8in1:                       no
cardreader_mp35:                         yes
cardreader_smargo:                       yes
cardreader_pcsc:                         yes
cardreader_smartreader:                  yes
cardreader_db2com:                       no
cardreader_stapi:                        no
cardreader_stapi5:                       no
cardreader_stinger:                      yes

oscam.conf

# oscam.conf generated automatically by Streamboard OSCAM 1.20_svn SVN r11678
# Read more: https://svn.streamboard.tv/oscam/trunk/Distribution/doc/txt/oscam.conf.txt

[global]
logfile                       = /var/log/oscam/oscam.log
nice                          = 1
usrfile                       = /var/log/oscam/oscamuser.log
cwlogdir                      = /var/log/oscam/cw

[newcamd]
port                          = 5754@0604:000000
key                           = 000102030405060708090A0B0C0D

[dvbapi]
enabled                       = 1
au                            = 1
pmt_mode                      = 0
request_mode                  = 1
user                          = dvbapiuser
boxtype                       = pc

[monitor]
port                          = 988
aulow                         = 120
monlevel                      = 1

[webif]
httpport                      = 8888
httpuser                      = admin
httppwd                       = <knip>
httpallowed                   = 127.0.0.1,192.168.0.0-192.168.255.255,10.0.0.0-10.255.255.255,172.16.0.0-172.31.255.255,255.255.255.255
aulow                         = 120

oscam.server

# oscam.server generated automatically by Streamboard OSCAM 1.20_svn SVN r11678
# Read more: https://svn.streamboard.tv/oscam/trunk/Distribution/doc/txt/oscam.server.txt

[reader]
label       = ZiggoSCR
description = Ziggo smartcard
protocol    = mouse
autospeed   = 1
device      = /dev/serial/by-id/usb-FTDI_FT232R_USB_UART_AQ00EEFA-if00-port0

boxkey      = <knip>
rsakey     = <knip>
detect     = cd
cardmhz    = 600
#mhz        = 600

#caid       = 0604
ident      = 0604:000000
chid       = 0604:<provider>,000B,0384,FFE0,7FFE,7FFD,FF8D

group      = 1
emmcache   = 1,3,2,0

auprovid   = 000604

#blockemm-unknown = 1
#blockemm-g       = 1
dropbadcws        = 1

oscam.user

# oscam.user generated automatically by Streamboard OSCAM 1.20_svn SVN r11678
# Read more: https://svn.streamboard.tv/oscam/trunk/Distribution/doc/txt/oscam.user.txt

[account]
user                          = tvh1
pwd                           = password1
au                            = ZiggoSCR
group                         = 1

[account]
disabled                      = 1
user                          = tvh2
pwd                           = password2
au                            = ZiggoSCR
group                         = 1

[account]
disabled                      = 1
user                          = tvh3
pwd                           = password3
au                            = ZiggoSCR
group                         = 1

[account]
disabled                      = 1
user                          = tvh4
pwd                           = password4
au                            = ZiggoSCR
group                         = 1

[account]
user                          = dvbapiuser
caid                          = 0604
au                            = ZiggoSCR
group                         = 1
ident                         = 0604:<provider>

oscam.srvid en oscam.srvid2 zijn leeg

Log na een herstart, 1x van kanaal veranderd en bij de 1e freeze

2021/01/07 12:28:49 00000000 s     (main) System name    = Linux
2021/01/07 12:28:49 00000000 s     (main) Host name      = raspberrypi
2021/01/07 12:28:49 00000000 s     (main) Release        = 5.4.79-v7l+
2021/01/07 12:28:49 00000000 s     (main) Version        = #1373 SMP Mon Nov 23 13:27:40 GMT 2020
2021/01/07 12:28:49 00000000 s     (main) Machine        = armv7l
2021/01/07 12:28:49 00000000 s     (main) creating pidfile /tmp/.oscam/oscam.pid with pid 27948
2021/01/07 12:28:49 00000000 s   (config) services reloaded: 0 services freed, 12 services loaded, rejected 0
2021/01/07 12:28:49 00000000 s   (config) userdb reloaded: 5 accounts loaded, 0 expired, 3 disabled
2021/01/07 12:28:49 00000000 s     (main) signal handling initialized
2021/01/07 12:28:49 00000000 s      (net) monitor: initialized (fd=6, port=988)
2021/01/07 12:28:49 00000000 s      (net) newcamd: initialized (fd=7, port=5754)
2021/01/07 12:28:49 00000000 s      (net) -> CAID: 0604 PROVID: 000000
2021/01/07 12:28:49 00000000 s   (reader) ZiggoSCR [mouse] creating thread for device /dev/serial/by-id/usb-FTDI_FT232R_USB_UART_AQ00EEFA-if00-port0
2021/01/07 12:28:49 00000000 s     (main) waiting for local card init
2021/01/07 12:28:49 67D0E15B h    (webif) webif: decompressed 167071 bytes back into 411060 bytes
2021/01/07 12:28:49 67D0E15B h    (webif) HTTP Server running. ip=0.0.0.0 port=8888
2021/01/07 12:28:49 3314E59F r   (reader) ZiggoSCR [mouse] Reader initialized (device=/dev/serial/by-id/usb-FTDI_FT232R_USB_UART_AQ00EEFA-if00-port0, detect=cd, mhz=357, cardmhz=600)
2021/01/07 12:28:50 3314E59F r   (reader) ZiggoSCR [mouse] card detected
2021/01/07 12:28:51 3314E59F r   (reader) ZiggoSCR [mouse] ATR: 3B 9F 21 0E 49 52 44 45 54 4F 20 41 43 53 20 56 35 2E 38 95 
2021/01/07 12:28:52 3314E59F r   (reader) ZiggoSCR [mouse] detect irdeto card
2021/01/07 12:28:53 3314E59F r   (reader) ZiggoSCR [mouse] Irdeto SC 58 version 21 revision 1, patch level e
2021/01/07 12:28:53 3314E59F r   (reader) ZiggoSCR [mouse] caid: 0604, acs: 0.05, country code: NLD
2021/01/07 12:28:53 3314E59F r   (reader) ZiggoSCR [mouse] providers: 4, ascii serial: ##########, hex serial: ######, hex base: ##
2021/01/07 12:28:56 3314E59F r   (reader) ZiggoSCR [mouse] active providers: 4 (<provider>,ffffff,ffffff,ffffff)
2021/01/07 12:28:56 3314E59F r   (reader) ZiggoSCR [mouse] found card system irdeto
2021/01/07 12:28:56 3314E59F r   (reader) ZiggoSCR [irdeto] THIS WAS A SUCCESSFUL START ATTEMPT No  1 out of max allotted of 1
2021/01/07 12:28:57 3314E59F r   (reader) ZiggoSCR [irdeto] entitlements for provider: 1, id: <provider>
2021/01/07 12:28:57 00000000   >> OSCam << cardserver log switched, version 1.20_svn, build r11678 (arm-linux-gnueabihf)
2021/01/07 12:28:57 3314E59F r   (reader) ZiggoSCR [irdeto] chid: 000B, date: 2021/01/05 - 2021/07/25
2021/01/07 12:28:57 3314E59F r   (reader) ZiggoSCR [irdeto] chid: 0384, date: 2021/01/06 - 2021/07/25
2021/01/07 12:28:57 3314E59F r   (reader) ZiggoSCR [irdeto] chid: FFE0, date: 2021/01/05 - 2021/02/05
2021/01/07 12:28:57 3314E59F r   (reader) ZiggoSCR [irdeto] chid: 7FFE, date: 2015/08/10 - 2015/09/09
2021/01/07 12:28:57 3314E59F r   (reader) ZiggoSCR [irdeto] chid: 7FFD, date: 2021/01/06 - 2021/01/16
2021/01/07 12:28:57 3314E59F r   (reader) ZiggoSCR [irdeto] chid: FFD8, date: 2021/01/06 - 2021/07/25
2021/01/07 12:28:58 3314E59F r   (reader) ZiggoSCR [irdeto] Warning: needed try nr 2, next ECM has some delay
2021/01/07 12:28:59 00000000 s     (main) init for all local cards done
2021/01/07 12:28:59 00000000 s (emmcache) loaded 0 emmcache records from /tmp/.oscam/oscam.emmcache in 0 ms
2021/01/07 12:28:59 00000000 s (emmcache) loaded 0 emmstat records from /tmp/.oscam/oscam.emmstat in 0 ms
2021/01/07 12:28:59 00000000 s (anticasc) anti cascading disabled
2021/01/07 12:28:59 4383F3F1 c  (newcamd) client connected to 5754 port
2021/01/07 12:28:59 6DFC9662 c   (client) plain dvbapi-client granted (dvbapiuser, au=on (1 reader))
2021/01/07 12:28:59 4383F3F1 c   (client) anonymous disconnected from 192.168.x.x
2021/01/07 12:28:59 6DFC9662 c   (dvbapi) dvbapi channelcache loaded from /usr/local/etc/oscam.ccache
2021/01/07 12:28:59 6DFC9662 c   (dvbapi) Using /tmp/camd.socket listen socket, API forced to DVBAPIv3 (0), userconfig boxtype: 11
2021/01/07 12:29:00 36C2BDA6 c  (newcamd) client connected to 5754 port
2021/01/07 12:29:00 36C2BDA6 c   (client) encrypted newcamd:5754-client 192.168.x.x granted (tvh1, au=on (1 reader))
2021/01/07 12:29:00 36C2BDA6 c  (newcamd) user tvh1 authenticated successfully (Tvheadend)
2021/01/07 12:29:00 36C2BDA6 c  (newcamd) AU enabled for user tvh1 on reader ZiggoSCR
2021/01/07 12:29:07 3314E59F r   (reader) ZiggoSCR [irdeto] Warning: needed try nr 2, next ECM has some delay
2021/01/07 12:29:11 36C2BDA6 c      (ecm) tvh1 (0604@000000/000B/4C05/44:FA387BCAE853240357723A056722EEF1): timeout (5000 ms) by ZiggoSCR
2021/01/07 12:29:11 36C2BDA6 c      (ecm) tvh1 (0604@000000/270E/4C05/44:7974DF14965FEC833C983495C04552C2): rejected group (0 ms) (no matching reader)
2021/01/07 12:29:16 3314E59F r   (reader) ZiggoSCR [irdeto] tvh1 emmtype=global, len=43 (hex: 0x2B), cnt=0: written (12198 ms)
2021/01/07 12:29:31 3314E59F r   (reader) ZiggoSCR [irdeto] Warning: needed try nr 2, next ECM has some delay
2021/01/07 12:29:31 36C2BDA6 c      (ecm) tvh1 (0604@000000/000B/4C05/44:7D06CEB6444A9D41A0DE2318466A4B73): timeout (5000 ms) by ZiggoSCR
2021/01/07 12:29:34 3314E59F r   (reader) ZiggoSCR [irdeto] tvh1 emmtype=global, len=43 (hex: 0x2B), cnt=0: written (8330 ms)
2021/01/07 12:29:46 36C2BDA6 c      (ecm) tvh1 (0604@000000/270E/4C06/44:6DFAA0BF8AA02FD367D618E7742C1BCA): rejected group (0 ms) (no matching reader)
2021/01/07 12:29:47 36C2BDA6 c      (ecm) tvh1 (0604@000000/270E/4C06/44:CC74A83547E9D2AAB2763853F295387D): rejected group (0 ms) (no matching reader)
2021/01/07 12:29:48 3314E59F r   (reader) ZiggoSCR [irdeto] Warning: needed try nr 2, next ECM has some delay
2021/01/07 12:29:49 36C2BDA6 c      (ecm) tvh1 (0604@000000/000B/4C06/44:6C9CB1242A7D3C298B5EBC3B3DF00D7F): found (3414 ms) by ZiggoSCR
2021/01/07 12:29:49 36C2BDA6 c      (ecm) tvh1 (0604@000000/270E/4C05/44:6BAD6D4CC571723B841C16DEDDA91FA5): rejected group (0 ms) (no matching reader)
2021/01/07 12:29:49 36C2BDA6 c      (ecm) tvh1 (0604@000000/000B/4C06/44:8D7F32A82E25DF523D759F77DCB8C970): found (2859 ms) by ZiggoSCR
2021/01/07 12:29:49 36C2BDA6 c      (ecm) tvh1 (0604@000000/000B/4C05/44:9B107B7D0B722D6FA642BB54D3130719): found (1890 ms) by ZiggoSCR
2021/01/07 12:30:06 3314E59F r   (reader) ZiggoSCR [irdeto] Warning: needed try nr 2, next ECM has some delay
2021/01/07 12:30:08 3314E59F r   (reader) ZiggoSCR [irdeto] tvh1 emmtype=global, len=43 (hex: 0x2B), cnt=0: written (3720 ms)
2021/01/07 12:30:11 36C2BDA6 c      (ecm) tvh1 (0604@000000/000B/4C05/44:2CF337A1E0E00FFF0A6100B77BD7417A): timeout (5000 ms) by ZiggoSCR
2021/01/07 12:30:11 36C2BDA6 c      (ecm) tvh1 (0604@000000/270E/4C05/44:D9ED765613E6CDAD404351BD9E514CBA): rejected group (0 ms) (no matching reader)
2021/01/07 12:30:12 3314E59F r   (reader) ZiggoSCR [irdeto] Warning: needed try nr 2, next ECM has some dela

beeld heb ik random voor 1 minuut of 3 seconden... niet stabiel. Wat kan ik nog aanpassen om het stabiel te krijgen.

 

in de log zie ik deze: (reader) ZiggoSCR [irdeto] Warning: needed try nr 2, next ECM has some delay. Kan er niet acher komen wat dit betekend.

 

aangepast door Barneby
Link naar bericht
Delen op andere sites
  • 3 weken later...

Dit is mijn config en werkt goed, vermoedelijk heb je een probleem met init en chid en rsa key..

 

 

 

[reader]
label                         = Ziggo-kaart
description                   = Ziggo-kaart
protocol                      = internal
device                        = /dev/sci1
caid                          = 0604
boxkey                        = 1122334455667788
rsakey                        =  benkende ziggo key
fix07                         = 0
readtiers                     = 0
detect                        = cd
detect_seca_nagra_tunneled_card= 0
mhz                           = 450
cardmhz                       = 2700
group                         = 1
emmcache                      = 1,1,15,0
cccreshare                    = 1
ccchop                        = 2
read_old_classes              = 0

 

aangepast door Phoenixx
Link naar bericht
Delen op andere sites

Maak een account aan of log in om te reageren

Je moet een lid zijn om een reactie te kunnen achterlaten

Account aanmaken

Registreer voor een nieuwe account in onze community. Het is erg gemakkelijk!

Registreer een nieuwe account

Inloggen

Heb je reeds een account? Log hier in.

Nu inloggen
 Delen
  • Wie is er online   0 leden

    Er zijn geen geregistreerde gebruikers deze pagina aan het bekijken

×
×
  • Nieuwe aanmaken...

Belangrijke informatie

Lees alvorens je verder gaat onze Gebruiksvoorwaarden en Privacybeleid. We hebben cookies geplaatst op je toestel om deze website voor jou beter te kunnen maken. Je kunt de cookie instellingen aanpassen, anders gaan we er van uit dat het goed is om verder te gaan.