Gast Geplaatst: 6 juni 2003 Geplaatst: 6 juni 2003 hallo, weet iemand of heeft iemand al een module,(magic of joker of allcam) draaien in een nokia 9902 de nokia heeft een aston 1.05 module maar de goldcard werkt niet meer de originele canal plus kaart wel,maar als hij er straks er mee ophoud weet iemand dan iets met en of ander module bedankt alvast
Bigfoot Geplaatst: 6 juni 2003 Geplaatst: 6 juni 2003 Enig soldeerwerk is wel vereist met die Nokia heb ik zo begrepen!
Gast Geplaatst: 6 juni 2003 Geplaatst: 6 juni 2003 o ja hoezo? heb jij ervaring met de nokia 9902 dan,want ikzelf heb een humax maar de nokia is van mijn vader en normaal doe ik altijd bij hem een goldcard in de nokia maar zoals ik heb begrepen kun je met de goldcard ook niks meer en er staat niet veel van de nokia 9902 op de boarden groetjes
Bigfoot Geplaatst: 6 juni 2003 Geplaatst: 6 juni 2003 Kijk maar es hier ! <img src="/ubbthreads/images/graemlins/xyxthumbs.gif" alt="" /> Citaat: Nokia 9800 & 9902 CI Interface Modification On 9800 and 9902 there is a problem, the cam is not recognized all time at bootup, and few peoples have reported that the Joker and ICECrypt (BLACK) modules may be destroyed at power-up. After few investigations on PCMCIA socket, it apears that when you put your STB in standby the 5V is shuted down, but few data lines remains actives. With this hardware modification to the STB the cam is recognized at 100%, and this solve the potential cam crash ( The eeprom corrupted because the power is removed on the cam with data lines actives ). This modification keep the c.i. interface power under ( at 4.3V ) during standby, and remove spikes at power on. NOKIA 9800S You can conect from welding marked as "RC56" -------------------------------------------------------------------------------- Some peoples have also reported problems to flash the Joker and ICECrypt (BLACK) on 9800 and 9902. Excepted this problem the Joker work really good on these STB, zapping faster and more stable. This modification can also help with MM + Clones and old type Irdeto Freecam, NO more catastrophic results ( freeze, hang, missing channels... ).
Tonskidutch Geplaatst: 6 juni 2003 Geplaatst: 6 juni 2003 Nokia 9800 & 9902 CI Interface Modification wijziging van het CI On 9800 and 9902 there is a problem, the cam is not recognized all time at bootup, and few peoples have reported that the Joker and ICECrypt (BLACK) modules may be destroyed at power-up. Op een 9800 en de 9202 bestaat een probleem dat de ci-module niet wordt herkent bij reboot / herstart. Zelfs hebben sommigen gemeld dat een Jokercam of Icecrypt werden gemold bij de start van de receiver After few investigations on PCMCIA socket, it apears that when you put your STB in standby the 5V is shuted down, but few data lines remains actives. Na enkele onderzoekingen van het pcmcia interface (het CI-schachtje) bleek dat de normale 5 Volt spanning kompleet wegvalt en enkel een paar contacten wel actief blijven. With this hardware modification to the STB the cam is recognized at 100%, and this solve the potential cam crash ( The eeprom corrupted because the power is removed on the cam with data lines actives ). Met deze aanbevolen wijziging van je hardware wordt de CI-module volledig herkend en voorkomt potentiele ci-moduul blokkeringen. (je eeprom in de module wordt niet meer gecorrumpeerd door het verlies van alle contacten welke nodig zijn) This modification keep the c.i. interface power under ( at 4.3V ) during standby, and remove spikes at power on. Some peoples have also reported problems to flash the Joker and ICECrypt (BLACK) on 9800 and 9902. Deze modificatie / wijziging voorkomt tevens problemen bij het laden van firmware van bijvoorbeeld een Joker en Icecrypt Cam middels een Nokia 9800 en 9202 (reported betekend hier, het is gemeld door diverse lui) Excepted this problem the Joker work really good on these STB, zapping faster and more stable. Uitgezonderd van deze problemen van voorheen werken de Jokers en soortgelijke nu goed op die twee type Nokia receivers... This modification can also help with MM + Clones and old type Irdeto Freecam, NO more catastrophic results ( freeze, hang, missing channels... ). Deze wijziging in de hardware helpt ook bij de problematiek van bevriezen van het beeld en komplete hangers van je receiver met gebruikmaking van een MM of MMclone of Freecam van het oude type... Als toegift.. een receiver moet op een bepaalde spanning en met specifieke signalen de CI- Module in leven houden. Indien daar een software of hardware matige fout bij optreedt ontregelt dat een juiste werking... Dat bepaalde receivers hier last van hebben is hardware afhankelijk, MAAR er zijn ook receivers die volledig afhankelijk zijn van de software update van een fabrikant welke zelfs doelbewust de time-synchronisation en contacten tussen CI-module en Receiver kan beinvloeden....> SPREEK een grijze CAM kan weigeren <.... dit ter lering ende vermaak <img src="/ubbthreads/images/graemlins/grin.gif" alt="" /> zoals Lambic zou zeggen... Space Base Oliver Koletzki, Frida Darko
Gast Geplaatst: 6 juni 2003 Geplaatst: 6 juni 2003 nou mag ik je hel erg bedanken voor de uitleg en voral de vertaling ik snap het nu bedankt <img src="/ubbthreads/images/graemlins/xyxthumbs.gif" alt="" /> <img src="/ubbthreads/images/graemlins/biggthumpup.gif" alt="" /> <img src="/ubbthreads/images/graemlins/xyxthumbs.gif" alt="" /> <img src="/ubbthreads/images/graemlins/biggthumpup.gif" alt="" />
Aanbevolen berichten
Maak een account aan of log in om te reageren
Je moet een lid zijn om een reactie te kunnen achterlaten
Account aanmaken
Registreer voor een nieuwe account in onze community. Het is erg gemakkelijk!
Registreer een nieuwe accountInloggen
Heb je reeds een account? Log hier in.
Nu inloggen