[all] NewCS 1.50

[EaS]

... is zojuist verschenen.

 

De changelog:

 

v.1.50

 

• Fix to reconize newest NDS cards.
• Added more functions to the WEB-console.
• Fixed stats functions on WEB-console.
• First betatest of Chameleon P2P-network (look at pt.1).
• First release of Feynman opensource client-server protocol (look at pt.2).
• Updated ezxml to latest version, it IS more sensitive for errors in xml (use a xml validator if needed).
• Removed WEB-console from win32 (win32 is a limited version, without feynman, chameleon and web-console).
• The Axis Eltrax SDK is sadly broken, support for this Arch will hopefully be back in the next release.

 

Beschikbaar voor de volgende type CPU architecturen: ppc, mips, x86, x86-64, SuperH & ARM.

 

Download link:

http://www.dreamboxworld.com/dbw/newcs.htm

[Beeper]

Heeft iemand deze versie al aan de praat?

 

met de overgang van Pli Flubber naar Iolite, ook over naar deze versie,

 

Krijg mijn kaartjes echter niet aan de praat.

 

Heb de volledige versie gedowned, gebruik de SCI config, maar kan niet eens kaartinformatie opvragen.

 

Een werkende config is welkom

 

<newCSconfig>

<readers name="SCI">

<device>

<name>Lower Cardreader</name>

<type>sci</type>

<mhz>600</mhz>

<node>/dev/sci0</node>

<parity>odd</parity>

<reset>normal</reset>

<export>Yes</export>

<enabled>Yes</enabled>

<blocksa>No</blocksa>

<blockua>No</blockua>

<blockga>No</blockga>

<!-- <boxkey>0000000000</boxkey> -->

<!-- <rsa>0000000000</rsa> -->

<irdeto-camkey>0000000000000000</irdeto-camkey>

<irdeto-camkey-data>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</irdeto-camkey-data>

<crypto-special>No</crypto-special>

<ipk>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</ipk>

<ucpk>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</ucpk>

<PTShandshake>No</PTShandshake>

<carddetect>yes</carddetect>

<newcamd_port>10000</newcamd_port>

<autosid>Yes</autosid>

<Seca-PPV>no</Seca-PPV>

<pincode>0000</pincode>

<priority>fifo</priority>

</device>

<device>

<name>Upper Cardreader</name>

<type>sci</type>

<mhz>600</mhz>

<node>/dev/sci1</node>

<parity>odd</parity>

<reset>normal</reset>

<export>Yes</export>

<enabled>Yes</enabled>

<blocksa>No</blocksa>

<blockua>No</blockua>

<blockga>No</blockga>

<!-- <boxkey>0000000000</boxkey> -->

<!-- <rsa>0000000000</rsa> -->

<irdeto-camkey>0000000000000000</irdeto-camkey>

<irdeto-camkey-data>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</irdeto-camkey-data>

<crypto-special>No</crypto-special>

<ipk>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</ipk>

<ucpk>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</ucpk>

<PTShandshake>No</PTShandshake>

<carddetect>yes</carddetect>

<newcamd_port>10001</newcamd_port>

<autosid>Yes</autosid>

<Seca-PPV>no</Seca-PPV>

<pincode>0000</pincode>

<priority>fifo</priority>

</device>

</readers>

<radegastserver>

<enabled>No</enabled>

<port>16000</port>

<allow>

<hostname>localhost</hostname>

</allow>

</radegastserver>

<cache>

<emm>20</emm>

<ecm>-1</ecm>

</cache>

<debug>

<password>NewCSpwd</password>

<level>normal</level>

<type>init</type>

<output>console,tcp</output>

<console_options>normal,init</console_options>

<tcp_port>1001</tcp_port>

<tcp_options>normal,init</tcp_options>

</debug>

<newcamdserver>

<enabled>Yes</enabled>

<name>newcs</name>

<deskey>01 02 03 04 05 06 07 08 09 10 11 12 13 14</deskey>

<user>

<name>local</name>

<password>local</password>

<hostname>localhost</hostname>

<port>12000</port>

<au>on</au>

<sidoverride>off</sidoverride>

<spider>No</spider>

<rate>2</rate>

</user>

</newcamdserver>

</newCSconfig>

 

 

Wie helpt ? <img src="/forums/images/graemlins/xyxthumbs.gif" alt="" />

[Roodkapke]

Even een oude config erin zetten.

Voor zover ik weet zit er in de config alleen een verwijzing naar externe readers.

De interne readers van de dreambox komen er niet in voor....

[Beeper]

Ik heb de oude config geprobeerd, maar geen soulaas.

 

Heb daarna de nieuwe config file aangepast zodat de interne readers worden gebruikt ( dit is mijns inziens noodzakelijk omdat er anders geen TCP poort aan de readers hangt.

 

Als ik nu in Iolite kaartinfo opvraag dan zie ik als respons alleen:

 

Password:*

Password:

 

Verder niets.

 

Mijn config:

<?xml version="1.0"?>

<!--

 

For setup-issues, look in readme.txt!

If there are other troubles, try different forums or irc channels around <img src="/forums/images/graemlins/blush.gif" alt="" />)

 

The configfile are NOT case-sensitive, and shouldnt care about dos/unix cr/lf.

-->

 

<newCSconfig>

<globals>

<!-- valid value for listening-ip are:

IPv4 adress of local interface. -->

<listening-ip>127.0.0.1</listening-ip>

 

<!-- valid value for certificate are:

Full path to your certificate file. -->

<certificate>/var/tuxbox/config/newcs.pem</certificate>

</globals>

<readers name="SCI">

<device>

<name>Lower Cardreader</name>

<type>sci</type>

<mhz>600</mhz>

<node>/dev/sci0</node>

<parity>odd</parity>

<reset>normal</reset>

<export>Yes</export>

<enabled>Yes</enabled>

<blocksa>No</blocksa>

<blockua>No</blockua>

<blockga>No</blockga>

<!-- <boxkey>0000000000</boxkey> -->

<!-- <rsa>0000000000</rsa> -->

<irdeto-camkey>0000000000000000</irdeto-camkey>

<irdeto-camkey-data>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</irdeto-camkey-data>

<crypto-special>No</crypto-special>

<ipk>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</ipk>

<ucpk>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</ucpk>

<PTShandshake>No</PTShandshake>

<carddetect>yes</carddetect>

<newcamd_port>15000</newcamd_port>

<autosid>Yes</autosid>

<Seca-PPV>no</Seca-PPV>

<pincode>0000</pincode>

<priority>fifo</priority>

</device>

<device>

<name>Upper Cardreader</name>

<type>sci</type>

<mhz>600</mhz>

<node>/dev/sci1</node>

<parity>odd</parity>

<reset>normal</reset>

<export>Yes</export>

<enabled>Yes</enabled>

<blocksa>No</blocksa>

<blockua>No</blockua>

<blockga>No</blockga>

<!-- <boxkey>0000000000</boxkey> -->

<!-- <rsa>0000000000</rsa> -->

<irdeto-camkey>0000000000000000</irdeto-camkey>

<irdeto-camkey-data>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</irdeto-camkey-data>

<crypto-special>No</crypto-special>

<ipk>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</ipk>

<ucpk>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</ucpk>

<PTShandshake>No</PTShandshake>

<carddetect>yes</carddetect>

<newcamd_port>15000</newcamd_port>

<autosid>Yes</autosid>

<Seca-PPV>no</Seca-PPV>

<pincode>0000</pincode>

<priority>fifo</priority>

</device>

</readers>

<radegastserver>

<!-- valid value for enable are:

Yes, No - Enable or Disable radegast server. -->

<enabled>No</enabled>

 

<!-- valid value for port are:

0,65535 - Which port to listen for incomming connections. -->

<port>10001</port>

 

<allow>

<!-- valid value for hostname are:

all, IP-address or DNS-name. -->

<hostname>localhost</hostname>

</allow>

</radegastserver>

<cache>

<!-- valid value for emm are:

0-255 - Number of EMM's to cache. -->

<emm>20</emm>

 

<!-- valid value for ecm are:

0-255 - Number of ECM's to cache.

-1 - Dynamic ECM Cache. -->

<ecm>-1</ecm>

</cache>

<httpd>

<server> <!-- Port to accept connections on -->

<port>8080</port>

<enabled>No</enabled>

</server>

<user>

<!-- valid value for userfile are:

Any username you'd like - Used for browser to logon (its case sensitive). -->

<name>newcs</name>

 

<!-- valid value for password are:

Any password you'd like - Used for browser to logon (its case sensitive). -->

<password>newcs</password>

 

<!-- valid value for accesslevel are:

admin, stats - Define what rights the user has in the web-console -->

<accesslevel>admin</accesslevel>

</user>

</httpd>

<debug>

<!-- valid value for password:

Max 25 characters and minimum 8, this is case-sensitive. -->

<password>NewCSpwd</password>

 

<!-- valid value for mode:

simple, advanced - Set TCP-Console to advanced mode to get access to

potentially dangerous features.-->

<mode>simple</mode>

 

<!-- valid value for level are:

normal, verbose, spam - How extensive debug should be. -->

<level>normal</level>

 

<!-- valid value for type are:

Init, general, ecm, emm, net, all - Section of debug that should be displayed. -->

<type>init</type>

 

<!-- valid value for output are:

Console, udp, tcp, file, all - Where to show debug. -->

<output>console,tcp</output>

 

<!-- console_options are so you can set own loglevel/type for console-logger:

Should hold level and type-tags like above. -->

<console_options>normal,init</console_options>

 

<!-- valid value for logfile are:

Path and filename - Where to write debug logs if file or all is chosed in output. -->

<logfile>/hdd/newcs.txt</logfile>

 

<!-- file_options are so you can set own loglevel/type for file-logger:

Should hold level and type-tags like above. -->

<file_options>spam,all</file_options>

 

<!-- valid value for udp_host are:

IP-address or DNS-name - Where to send debug if udp or all is chosed in output. -->

<udp_host>192.168.1.10</udp_host>

 

<!-- valid value for udp_port are:

0,65535 - Which port to send the udp packets. -->

<udp_port>1000</udp_port>

 

<!-- udp_options are so you can set own loglevel/type for udp-logger:

Should hold level and type-tags like above. -->

<udp_options>normal,init</udp_options>

 

<!-- valid value for tcp_port are:

0,65535 - Which port to listen for incomming tcp connections. -->

<tcp_port>1001</tcp_port>

 

<!-- tcp_options are so you can set own loglevel/type for tcp-logger:

Should hold level and type-tags like above. -->

<tcp_options>normal,init</tcp_options>

</debug>

<newcamdserver>

<!-- valid value for enabled are:

Yes, No - Enable or Disable newcamd server. -->

<enabled>Yes</enabled>

 

<!-- valid value for name are:

Any name - Used to identify server to remote clients,

if the remote client isnt newcamd, this field have no purpouse. -->

<name>Cardserver</name>

 

<!-- valid value for deskey are:

any 14x2 numbers - Used to encrypt the communication between

the client and the server. -->

<deskey>01 02 03 04 05 06 07 08 09 10 11 12 13 14</deskey>

 

<!-- Notes about users:

The first user doesnt have au without beeing it set to on (unlike newcamd cardserver).

You can add as many user-sections as you want, just put them under eachother. -->

<user>

<!-- valid value for userfile are:

Any username you'd like - Used for client to logon (its case sensitive). -->

<name>local</name>

 

<!-- valid value for password are:

Any password you'd like - Used for client to logon (its case sensitive). -->

<password>local</password>

 

<!-- valid value for hostname are:

IP-address or DNS-name - Used for reverse login to the client. -->

<hostname>127.0.0.1</hostname>

 

<!-- valid value for port are:

0-65535 - Which port reverse login to the client. -->

<port>12000</port>

 

<!-- valid value for au are:

On,Off - Wheather the client are allowed to send EMM to the server. -->

<au>on</au>

 

<!-- valid value for sidoverride are:

On,Off - Wheather the client are allowed to override the SID-filter. -->

<sidoverride>off</sidoverride>

 

<!-- valid value for readers are device name,

if one <allow> present, other readers will be disabled! -->

<readers>

<allow>Lower Cardreader</allow>

</readers>

 

<!-- valid value for spider are:

Yes,No - Wheather the client are allowed to be newcamd Cardspider. -->

<spider>No</spider>

 

<!-- valid value for rate are:

1-60 - number of seconds between each ecm -->

<rate>2</rate>

 

<!-- valid value for status are:

access, banned - If its set as banned, user wont be able to logon. -->

<status>access</status>

</user>

<user>

<name>root</name>

<password>dreambox</password>

<au>on</au>

<status>access</status>

</user>

</newcamdserver>

<chameleon>

<server>

<!-- valid value for tcp_port are:

0,65535 - Which port to listen for incomming tcp connections. -->

<port>1234</port>

<!-- enable or disable the server, valid values are yes/no -->

<enabled>no</enabled>

</server>

<peer> <!-- Connect to remote Chamelon server with the below credentials -->

<hostname>localhost</hostname>

<!-- valid value for tcp_port are:

0,65535 - Which port to listen for incomming tcp connections. -->

<port>1234</port>

<!-- valid value for userfile are:

Any username you'd like - Used for client to logon (its case sensitive). -->

<name>myname</name>

<!-- valid value for password are:

Any password you'd like - Used for client to logon (its case sensitive). -->

<password>mypassword</password>

<!-- Not yet implemented, this will be how chameleon will connect to more than one network -->

<realm>myShares</realm>

</peer>

<user>

<!-- valid value for userfile are:

Any username you'd like - Used for client to logon (its case sensitive). -->

<name>myname</name>

<!-- valid value for password are:

Any password you'd like - Used for client to logon (its case sensitive). -->

<password>mypassword</password>

<!-- Not yet implemented, this will be how chameleon will connect to more than one network -->

<realm>myrealm</realm>

</user>

</chameleon>

<feynman>

<server>

<!-- valid value for tcp_port are:

0,65535 - Which port to listen for incomming tcp connections. -->

<port>12345</port>

<!-- enable or disable the server, valid values are yes/no -->

<enabled>no</enabled>

</server>

<user>

<!-- valid value for userfile are:

Any username you'd like - Used for client to logon (its case sensitive). -->

<name>myname</name>

<!-- valid value for password are:

Any password you'd like - Used for client to logon (its case sensitive). -->

<password>mypassword</password>

<!-- valid value for au are:

On,Off - Wheather the server will be allowed to send card details to the client. -->

<au>

<ua>on</ua>

<sa>on</sa>

</au>

</user>

</feynman>

</newCSconfig>

[salem999]

hoi,

alleen maar de volgende ertussen voegen , en je kun alles zien vriend

ik heb hier geen password gezet daarom biy inlogin gewoon op inlogin klikken en je bent in zoals de foto, of je kunt je eigen password geven als je dat wil.

 

<httpd>

<server>

<port>8080</port>

<enabled>yes</enabled>

</server>

<user>

<name></name>

<password></password>

<accesslevel>admin</accesslevel>

</user>

</httpd>

 

 

 

groeten

salem

[Tonskidutch]

ik las elders:

foutje in prorocol

 

<name>blabla</name>

moet zijn

<username>blabla</username>

 

cheers

[Mike Philippens]

Die geweldige 'new & improved' versie 1.50 heeft heel fijn mijn newcs.xml geleegd... Ik heb 't draaien op een Ubuntu server en nadat ik iets via de webinterface heb aangepast, vond ie het blijkbaar erg hard nodig om mijn config file maar leeg te maken. Kan ik alles weer intikken en vooral die webinterface maar niet meer gebruiken om iets even snel aan te willen passen...

 

grrrrr...ik haat dit soort grapjes...

[Beeper]

@Salem999:

 

Ik heb de config gegevens aangepast, maar helaas geen pagina via de PC.

Heb de HTTP authenticatie in de settings nog geprobeerd maar ook dit maakt geen verschil voor de kaartinfo. Het is alsof de server gewoon niet start. Via de gele toets kaartinfo opvragen geeft een regel met informatie, maar niets over de kaarten zelf.

 

@Tonskidutch:

Ik kan niet vinden waar de aanpassing gemaakt moet worden. heb de configfiles van dreemboxwereld site gehaald, die zou toch recent moeten zijn?

 

Helaas geen oplossing. Kan ik nog een query op het een of ander doen zodat ik meer informatie kan aanleveren ?

 

Goede jaarwisseling aan allen !

[Beeper]

Zie net dat er een nieuwe Iolite uit is, zal deze eens proberen.

Tot nader bericht ;-)

[djkoelkast]

Ik heb deze op een Debian server draaien en werkt op zich perfect, alleen zodra er 2 dreamboxen tegelijk zijn aangesloten krijg ik af en toe deze melding:

 

des_decrypt: bad checksum ?

 

hij doet het verder wel zonder problemen, maar wat zou dit kunnen zijn?

Dit bericht zie ik in het terminal venster waar ik newcs heb opgestart. Dat laat ik even open tot ik klaar ben met testen. Vanavond even kijken wat ie met 3 dreamboxen gaat doen, maar da's puur voor de test, ik heb aan 2 genoeg (huiskamer + slaapkamer)

[djkoelkast]

Met 3 boxen had ik het ook.

Iemand een idee wat dit is en of het erg is?