Ga naar inhoud


[ALL] CCcam.prio bestand


Alfi

Aanbevolen berichten

Aangezien ik nog niet veel van caids, cids en weet ik wat allemaal meer begrijp, doe de vraag hier maar. Ik heb 2 boxen in huis, in beiden een c+ kaartje en in de dreambox beneden nog een tvv. In CCcam heeft de box beneden met de twee kaarten een simpele F regel, de box boven een C regel. Werkt allemaal als een tierelier. Maar... De box boven gebruikt om de e.o.a. reden de c+ kaart beneden i.p.v. zijn eigen locale kaart confused.

 

Nu kan dat aangepast worden in CCcam.cfg, maar ik wil dit eigenlijk doen d.m.v. een CCcam.prio file zodat ik, wanneer nodig, toch de kaart beneden gebruik.

 

Helaas snap ik er niet genoeg van om dat werkend te krijgen en veel goede documentatie kan ik er ook niet over vinden. De uitleg hierover in CCcam.cfg is voor mij zelfs nog te specialistisch. Is hier iemand die me het e.e.a. duidelijk kan uitleggen?

 

Alvast bedankt,

 

Alfi

DM800 - OpenPLi - CCcam 2.1.4 - Wavefield T55

 

 

 

Link naar reactie
Delen op andere sites


je kunt wel

 

P: 0100:00006a #

erbij zetten maar weet niet of dat helpt.

je kunt ook in je cccam.cfg je C+ blokken

 

100:6a:0

 

maan dan zie je dus dat die niet meer binnen komt,

maar als het pakket van de andere kaart groter is zal

je daardoor dus weer minder beeld hebben.

 

ik weet het niet op dit moment ik zal eens zoeken

vind het ook wel interressant hier gebeurt het volgens mij ook,

dat er op andere kaart word gekeken.

 

succes

 

 

 

Dm 7020 Dm800 HD Venton HD Haupage Skystar 2

en altijd online.

 

Viasat 19.2, 23.5, 28.2 en 13.

 

Link naar reactie
Delen op andere sites

Ikzelf geef de voorkeur aan het aanpassen van de cfg, omdat hier meer mee mogelijk is.

Zeker als het gaat om toestellen die door jeugdigen gebruikt worden.

Een tijdslot in bouwen, of bepaalde zenders blokkeren, dit kan vrij simpel in de cfg.

grtz arie

_________________________________________________________________________

Dreambox8000(Sat/Sat/Cab/Ter)+2Tb-SATA \ 800HD(sat) ; 500HD+1Tb=>eSATA \ Clark_Tech ET9000 \ alles met open-PLi

Link naar reactie
Delen op andere sites

Ik word hier zo moe van....in plaats van twee zgn leuke opmerkingen te plaatsen is iedereen te beroerd om even de inhoud te kopieren uit de standaard config file die bij iedere nieuwe pack van cccam zit. Daar staat het nl in.....maar dat wisten jullie zeker ook al.....

 

 

######################################################################

# friends #

######################################################################

# syntax for to add a friend user to CCcam with the max up hops limit (default = 5)

# sharing of emus (default = 1), allow emm (default = 1), and optional

# downshare limits per share (default = no limits) and optional

# downshare limits per share based on caid:id:sid

# and optional timeslots in which share is valid (to block channels on box of children after 19:00 for instance)

# if no timeslot is defined 24 hrs a day is used

# emus are shared only one level down, even if no limits given

#

# max username length 20

# password length 'unlimited'

#

#F: <username> <password> <uphops> <shareemus> <allowemm> ( { caid:id(:downhops), caid:id(:downhops), ... } { caid:id:sid, caid:id:sid, ... } { begintime-endtime, ... } ) hostname/ip address

#

# example:

#

# F: user1 pass1

#

# user1 gets all our shares at max 5 hops from us

# (our local cards + max five hops away). He can share down to his own

# clients. He also receive emu shares (if he has 'yes' behind his C: entry),

# and is allowed to send us emm.

#

# F: user2 pass2 0 1 0 { 0100:000080, 0622:000000:1, 0500:000000:2 }

#

# user2 gets only our local cards but no 0100:000080.

# and our 0622:000000 cards only for himself (1 hop down),

# and 0500 cards for himself plus one additional hop down.

# He also gets our emus, and is NOT allowed to send us emm (updates).

#

# F: user3 pass3 5 0 1 { 0:0:3, 0100:000080:1 }

#

# user3 gets all cards at a maximum of 5 hops away from us,

# and get's to share them down two further levels beyond his own level.

# But he is not allowed to share 0100:000080 down to other users.

# He gets no emus from us, and he is allowed to send us emm.

#

# F: user4 pass4 5 0 1 { 0:0:3, 0100:000080:1 } { 0100:000080:15df }

#

# user4 gets all cards at a maximum of 5 hops away from us,

# and get's to share them down two further levels beyond his own level.

# But he is not allowed to share 0100:000080 down to other users.

# He gets no emus from us, and he is allowed to send us emm.

# He is also not allowed to view channel 0100:000080:15df

#

# F: user4 pass4 5 0 1 { } { } { 12:00-17:00, 19:00-20:00 }

#

# user4 gets all cards at a maximum of 5 hops away from us,

# and get's to share them down two further levels beyond his own level.

# the share is only valid between 12:00 and 17:00 and between 19:00 and 20:00

# outside these hours the share will not give cw's to the client

#

#

# F: user5 pass5 5 1 1 { } { } { } 192.168.1.1

#

# user5 gets all cards at a maximum of 5 hops away from us

# user5 is only allowed to connect from the host 192.168.1.1

#

 

---------------------------------------------------------

DM500S(2x),DM7020,DM800..3x 8-poorts Diseqc Switch, T90 Wavefrontier 9E,13E,19E,23E,28E...Triax 80cm op 30W

Link naar reactie
Delen op andere sites

  • 2 jaren later...
Origineel bericht van: mybrain
Ik word hier zo moe van....in plaats van twee zgn leuke opmerkingen te plaatsen is iedereen te beroerd om even de inhoud te kopieren uit de standaard config file die bij iedere nieuwe pack van cccam zit. Daar staat het nl in.....maar dat wisten jullie zeker ook al.....


######################################################################
# friends #
######################################################################
# syntax for to add a friend user to CCcam with the max up hops limit (default = 5)
# sharing of emus (default = 1), allow emm (default = 1), and optional
# downshare limits per share (default = no limits) and optional
# downshare limits per share based on caid:id:sid
# and optional timeslots in which share is valid (to block channels on box of children after 19:00 for instance)
# if no timeslot is defined 24 hrs a day is used
# emus are shared only one level down, even if no limits given
#
# max username length 20
# password length 'unlimited'
#
#F: <username> <password> <uphops> <shareemus> <allowemm> ( { caid:id(:downhops), caid:id(:downhops), ... } { caid:id:sid, caid:id:sid, ... } { begintime-endtime, ... } ) hostname/ip address
#
# example:
#
# F: user1 pass1
#
# user1 gets all our shares at max 5 hops from us
# (our local cards + max five hops away). He can share down to his own
# clients. He also receive emu shares (if he has 'yes' behind his C: entry),
# and is allowed to send us emm.
#
# F: user2 pass2 0 1 0 { 0100:000080, 0622:000000:1, 0500:000000:2 }
#
# user2 gets only our local cards but no 0100:000080.
# and our 0622:000000 cards only for himself (1 hop down),
# and 0500 cards for himself plus one additional hop down.
# He also gets our emus, and is NOT allowed to send us emm (updates).
#
# F: user3 pass3 5 0 1 { 0:0:3, 0100:000080:1 }
#
# user3 gets all cards at a maximum of 5 hops away from us,
# and get's to share them down two further levels beyond his own level.
# But he is not allowed to share 0100:000080 down to other users.
# He gets no emus from us, and he is allowed to send us emm.
#
# F: user4 pass4 5 0 1 { 0:0:3, 0100:000080:1 } { 0100:000080:15df }
#
# user4 gets all cards at a maximum of 5 hops away from us,
# and get's to share them down two further levels beyond his own level.
# But he is not allowed to share 0100:000080 down to other users.
# He gets no emus from us, and he is allowed to send us emm.
# He is also not allowed to view channel 0100:000080:15df
#
# F: user4 pass4 5 0 1 { } { } { 12:00-17:00, 19:00-20:00 }
#
# user4 gets all cards at a maximum of 5 hops away from us,
# and get's to share them down two further levels beyond his own level.
# the share is only valid between 12:00 and 17:00 and between 19:00 and 20:00
# outside these hours the share will not give cw's to the client
#
#
# F: user5 pass5 5 1 1 { } { } { } 192.168.1.1
#
# user5 gets all cards at a maximum of 5 hops away from us
# user5 is only allowed to connect from the host 192.168.1.1
#


Hier word ik nou zoooooooooooo moe van...

ET10000
DM7020HD

Linux laptop en Linux zelfbouw NAS

Link naar reactie
Delen op andere sites

Maak een account aan of log in om te reageren

Je moet een lid zijn om een reactie te kunnen achterlaten

Account aanmaken

Registreer voor een nieuwe account in onze community. Het is erg gemakkelijk!

Registreer een nieuwe account

Inloggen

Heb je reeds een account? Log hier in.

Nu inloggen
  • Wie is er online   0 leden

    • Er zijn geen geregistreerde gebruikers deze pagina aan het bekijken
×
×
  • Nieuwe aanmaken...