Ga naar inhoud


OSCAM en nieuwe (2019) Ziggo smartcard

rotewerken

Door rotewerken
in OSCam

 Delen

Aanbevolen berichten

rotewerken Vaker hier

rotewerken

Geplaatst:
Geplaatst:

Ik probeer mijn Raspberry's aan de gang te krijgen met OSCAM en TV-Headend.

TV-Headend werkt. Ik krijg zenders binnen, ik kan NED1-3 probleemloos kijken.

OSCAM krijg ik moeilijk aan de gang. Alles is geinstalleerd en werkt, maar... hij geeft "no entitlements" aan.

 

Mijn config is als volgt:

 

oscam.conf 

[global]
nice = -1
WaitForCards = 1
logfile = /var/log/oscam/oscam.log
nice = -1
maxlogsize = 1024
preferlocalcards = 1

[newcamd]
key = 000102030405060708090A0B0C0D
port = 9001@0606:AAAAAA
keepalive = 1

[monitor]
port = 988
aulow = 120
monlevel = 4

[dvbapi]
enabled = 1
au = 1
pmt_mode = 0
user = dvbapiuser
boxtype = pc
listen_port = 9090

[webif]
httpport = 8888
httpuser = kodi
httppwd = kodi
httprefresh = 15
httpallowed = 127.0.0.1,192.168.3.1-192.168.3.254,192.168.101.1-192.168.101.30
aulow = 120

 

oscam.server

  

[reader]
label    = ziggosc
protocol = mouse
detect   = CD
device   = /dev/ttyUSB0
cardmhz  = 600
mhz      = 600
boxkey   = 1122334455667788
rsakey   = 3C8633AAC0D367533DEC7BB2EEEDEB8CA3ADA52E58B99BB34672783277A1DAAC3B6106AD0909774E031B2A6E30195B437683AD0FC599B87D08CEA47BE1B6C76A
group    = 1
emmcache = 1,3,2
caid     = 0606
ident    = 0606:AAAAAA
auprovid = AAAAAA
needsemmfirst = 1

dit zijn eigenlijk voorbeeld configs die ik op internet gevonden heb.

 

Ik begrijp dat ik "AAAAAA" moet aanpassen naar een waarde die specifiek voor mijn kaart is. Ergens heb ik gelezen dat, als ik de kaart in de kaartlezer stop, hij zal zeggen "kaart gedetecteerd met AAAAAA". 

Het vreemde is dat, wanneer ik dit doe, de live-log niks weer geeft.

Enkel dit: 

2019/01/26 21:27:20 14F7D92A r        (-) -- Skipped 1 duplicated log lines --
2019/01/26 21:27:20 14F7D92A r   (reader) ziggosc [mouse] Buffers readed  0 bytes total time_us 75138
2019/01/26 21:27:21 14F7D92A r   (reader) ziggosc [mouse] Error activating card.
2019/01/26 21:27:21 14F7D92A r   (reader) ziggosc [mouse] Buffers readed  0 bytes total time_us 75146
2019/01/26 21:27:23 14F7D92A r   (reader) ziggosc [mouse] Buffers readed  0 bytes total time_us 75141
2019/01/26 21:27:24 14F7D92A r   (reader) ziggosc [mouse] Buffers readed  0 bytes total time_us 75140
2019/01/26 21:27:25 14F7D92A r   (reader) ziggosc [mouse] Error activating card.
2019/01/26 21:27:25 14F7D92A r   (reader) ziggosc [mouse] Buffers readed  0 bytes total time_us 75138
2019/01/26 21:27:27 14F7D92A r   (reader) ziggosc [mouse] Buffers readed  0 bytes total time_us 75192
2019/01/26 21:27:28 14F7D92A r   (reader) ziggosc [mouse] Buffers readed  0 bytes total time_us 75216
2019/01/26 21:27:29 14F7D92A r   (reader) ziggosc [mouse] Error activating card.
2019/01/26 21:27:29 14F7D92A r   (reader) ziggosc [mouse] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2019/01/26 21:27:29 14F7D92A r   (reader) ziggosc [mouse] card initializing error
2019/01/26 21:29:53 14F7D92A r   (reader) ziggosc [mouse] card detected
2019/01/26 21:29:53 14F7D92A r   (reader) ziggosc [mouse] Buffers readed  0 bytes total time_us 75139
2019/01/26 21:29:55 14F7D92A r   (reader) ziggosc [mouse] Buffers readed  0 bytes total time_us 75146
2019/01/26 21:29:56 14F7D92A r   (reader) ziggosc [mouse] Buffers readed  0 bytes total time_us 75148
2019/01/26 21:29:57 14F7D92A r   (reader) ziggosc [mouse] Error activating card.
2019/01/26 21:29:57 14F7D92A r   (reader) ziggosc [mouse] Buffers readed  0 bytes total time_us 75224
2019/01/26 21:29:59 14F7D92A r   (reader) ziggosc [mouse] Buffers readed  0 bytes total time_us 75140
2019/01/26 21:30:00 14F7D92A r   (reader) ziggosc [mouse] Buffers readed  0 bytes total time_us 75150
2019/01/26 21:30:01 14F7D92A r   (reader) ziggosc [mouse] Error activating card.
2019/01/26 21:30:01 14F7D92A r   (reader) ziggosc [mouse] Buffers readed  0 bytes total time_us 75247
2019/01/26 21:30:03 14F7D92A r   (reader) ziggosc [mouse] Buffers readed  0 bytes total time_us 75142
2019/01/26 21:30:04 14F7D92A r   (reader) ziggosc [mouse] Buffers readed  0 bytes total time_us 75144
2019/01/26 21:30:05 14F7D92A r   (reader) ziggosc [mouse] Error activating card.
2019/01/26 21:30:05 14F7D92A r   (reader) ziggosc [mouse] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2019/01/26 21:30:05 14F7D92A r   (reader) ziggosc [mouse] card initializing error

 

Mijn vraag nu is, welke stappen moet ik nog doorlopen, en hoe doe ik dat?

Ik heb deze kaart lezer: PHOENIX CARD READER

de switches staan op PHOENIX en 3.3V. Dat dingetje wat je er in prikt, is de 6.0000 variant.

 

Link naar reactie
Delen op andere sites

  • Reacties 124
  • Aangemaakt
  • Laatste reactie

Beste reacties in dit topic

Populaire dagen

Beste reacties in dit topic

Populaire dagen

Populaire berichten

bas.t
bas.t

@rotewerken: waar heb je die HOWTO geplaatst? Ik kan hem niet vinden.  

Geplaatste afbeeldingen

Mimisiku Superster

Mimisiku

Geplaatst:
Geplaatst:

Geen ervaring met een TV Headend.. De nieuwe Ziggo kaart (CAID 0606) werkt via een correcte dvbapi.. Dus oscam.dvbapi 0606:000000

De nieuwe kaart heeft de 'truc' om alle ECM's terug te sturen via CHID 000000 ongeacht de daadwerkelijke CHID van het kanaal wat je kijkt. Voor de standaard zenders is dat 00000B en 000384... 

Raspberry Pi 3B+ Argolis Triple Reader Kaartserver + Smargo

Vu+ Zero 4K DVB-S2X, Vu+ Zero 4K DVB-C/T2, DM525 Combo, DM920 UHD

VU+Ultimo4K BTE,  DM-Three UHD, Ziggo, HD+, TV-Vlaanderen, ORF, TiVuSAT, Fransat, SRG

5°W, 0.8°W, 4.8°E, 9°E, 13°E,19.2°E, 23.5°E, 28.2°E. Triax 88 en Wavefrontier

 

Link naar reactie
Delen op andere sites
Mimisiku Superster

Mimisiku

Geplaatst:
Geplaatst:

Je kaart word in eerste instantie niet eens gelezen dus eerst met de hardware aan de slag. De Irdetokaarten móeten op 6 Mhz draaien. Je Phoenix kaartlezer móet dus in 6 Mhz gezet worden! Mijn Phoenix geheugen is gedateerd, maar ik dacht dat die 'mouse' protocol dingen alleen op 3.57 Mhz draaiden. Als je een Live-Log post moet je wel zorgen dat je dat vanaf het begin doet. Ik kan nu niets zien wat er bij de initialisatie gebeurd.

Raspberry Pi 3B+ Argolis Triple Reader Kaartserver + Smargo

Vu+ Zero 4K DVB-S2X, Vu+ Zero 4K DVB-C/T2, DM525 Combo, DM920 UHD

VU+Ultimo4K BTE,  DM-Three UHD, Ziggo, HD+, TV-Vlaanderen, ORF, TiVuSAT, Fransat, SRG

5°W, 0.8°W, 4.8°E, 9°E, 13°E,19.2°E, 23.5°E, 28.2°E. Triax 88 en Wavefrontier

 

Link naar reactie
Delen op andere sites
Mimisiku Superster

Mimisiku

Geplaatst:
Geplaatst:

Wat een lelijk brolding zeg! Ziet er wel heel amateuristisch uit. Hij moet voor 6 Mhz wel in de SmartMouse mode staan.. Waarom niet gewoon een simpele Smargo?

Raspberry Pi 3B+ Argolis Triple Reader Kaartserver + Smargo

Vu+ Zero 4K DVB-S2X, Vu+ Zero 4K DVB-C/T2, DM525 Combo, DM920 UHD

VU+Ultimo4K BTE,  DM-Three UHD, Ziggo, HD+, TV-Vlaanderen, ORF, TiVuSAT, Fransat, SRG

5°W, 0.8°W, 4.8°E, 9°E, 13°E,19.2°E, 23.5°E, 28.2°E. Triax 88 en Wavefrontier

 

Link naar reactie
Delen op andere sites
rotewerken Vaker hier

rotewerken

Geplaatst:
  • Auteur
Geplaatst:

Ik heb hem omgezet.

Ik krijg nu in de logs dit: 2019/02/02 18:04:33 2CE9A323 c  (newcamd) no valid PROVID(s) found in CAID for user 'user1' 

2019/02/02 18:04:33 2CE9A323 c  (newcamd) no valid PROVID(s) found in CAID for user 'user1'

 

Hoe kom ik achter het juiste PROVIDER ID?, dus 606:XXXXXX

Link naar reactie
Delen op andere sites
Codx Superster

Codx

Geplaatst:
Geplaatst:

Laat eerst is een nieuwe oscam log zien,  ik neem aan dat de kaart al in een officiele box geactiveerd is?

SCHOTEL: 1,2 Mtr 50E-55W / 60cm Astra 19/23 / Airspy R2 SDR 24-1800 Mhz
RECEIVERS: Dreambox 920 UHD/DM8000/800SE / VU+ Ultimo 4K Sat & Kabel & T2 / Rpi2 ADS-B FlightFeeder

IPTV:  KPN Glas (AoN) 1 Gbit & IPTV Arris VIP5202 / Android 4K IPTV box / Kodi & Netflix / 100+ TB Storage

Link naar reactie
Delen op andere sites
Codx Superster

Codx

Geplaatst:
Geplaatst:

ok laat die oscam.log even opnieuw zien, dan kunnen we inschatten waar het probleem zit.   Sowieso de Ident is denk ik niet goed..

SCHOTEL: 1,2 Mtr 50E-55W / 60cm Astra 19/23 / Airspy R2 SDR 24-1800 Mhz
RECEIVERS: Dreambox 920 UHD/DM8000/800SE / VU+ Ultimo 4K Sat & Kabel & T2 / Rpi2 ADS-B FlightFeeder

IPTV:  KPN Glas (AoN) 1 Gbit & IPTV Arris VIP5202 / Android 4K IPTV box / Kodi & Netflix / 100+ TB Storage

Link naar reactie
Delen op andere sites
Mimisiku Superster

Mimisiku

Geplaatst:
Geplaatst: (aangepast)

Ik mag hopen dat je het hier hebt over een Oranje smartcard met 'Irdeto' erop. Hopelijk geen witte kaart want dan heb je een Nagra kaart te pakken en die gaat niet met OScam tenzij je de gelukkige bent met een boxkey, rsakey..

 

De CAID is 0606 en niet 606 (Irdeto), Nagra is 1801

 

aangepast door Mimisiku

Raspberry Pi 3B+ Argolis Triple Reader Kaartserver + Smargo

Vu+ Zero 4K DVB-S2X, Vu+ Zero 4K DVB-C/T2, DM525 Combo, DM920 UHD

VU+Ultimo4K BTE,  DM-Three UHD, Ziggo, HD+, TV-Vlaanderen, ORF, TiVuSAT, Fransat, SRG

5°W, 0.8°W, 4.8°E, 9°E, 13°E,19.2°E, 23.5°E, 28.2°E. Triax 88 en Wavefrontier

 

Link naar reactie
Delen op andere sites
Mimisiku Superster

Mimisiku

Geplaatst:
Geplaatst:

Pfffffft. Gelukkig... Anders was het wel een klein dramaatje geweest....

Raspberry Pi 3B+ Argolis Triple Reader Kaartserver + Smargo

Vu+ Zero 4K DVB-S2X, Vu+ Zero 4K DVB-C/T2, DM525 Combo, DM920 UHD

VU+Ultimo4K BTE,  DM-Three UHD, Ziggo, HD+, TV-Vlaanderen, ORF, TiVuSAT, Fransat, SRG

5°W, 0.8°W, 4.8°E, 9°E, 13°E,19.2°E, 23.5°E, 28.2°E. Triax 88 en Wavefrontier

 

Link naar reactie
Delen op andere sites
rotewerken Vaker hier

rotewerken

Geplaatst:
  • Auteur
Geplaatst:

-------------------------------------------------------------------------------
>> OSCam <<  cardserver log switched at Sat Feb  2 20:49:19 2019
-------------------------------------------------------------------------------
2019/02/02 20:49:19 00000000 s >> OSCam << cardserver log switched, version 1.20_svn, build r11478 (arm-linux-gnueabihf)
2019/02/02 20:49:19 00000000 s     (main) System name    = Linux
2019/02/02 20:49:19 00000000 s     (main) Host name      = tvheadend
2019/02/02 20:49:19 00000000 s     (main) Release        = 4.14.78-4-osmc
2019/02/02 20:49:19 00000000 s     (main) Version        = #1 SMP PREEMPT Wed Dec 12 17:58:11 UTC 2018
2019/02/02 20:49:19 00000000 s     (main) Machine        = armv7l
2019/02/02 20:49:19 00000000 s     (main) creating pidfile /var/run/oscam.pid with pid 15009
2019/02/02 20:49:19 00000000 s   (config) userdb reloaded: 4 accounts loaded, 0 expired, 0 disabled
2019/02/02 20:49:19 00000000 s     (main) signal handling initialized
2019/02/02 20:49:19 00000000 s      (net) monitor: initialized (fd=5, port=988)
2019/02/02 20:49:19 00000000 s      (net) newcamd: initialized (fd=6, port=9001)
2019/02/02 20:49:19 00000000 s      (net) -> CAID: 0606 PROVID: 000000
2019/02/02 20:49:19 00000000 s   (reader) ziggosc [mouse] creating thread for device /dev/ttyUSB0
2019/02/02 20:49:19 00000000 s     (main) waiting for local card init
2019/02/02 20:49:19 41F31EC4 h    (webif) webif: decompressed 178748 bytes back into 440288 bytes
2019/02/02 20:49:19 41F31EC4 h    (webif) HTTP Server running. ip=0.0.0.0 port=8888
2019/02/02 20:49:19 0D968779 r   (reader) ziggosc [mouse] Flush readed byte Nr 1 value 3b time_us 14290
2019/02/02 20:49:19 0D968779 r   (reader) ziggosc [mouse] Flush readed byte Nr 2 value 9f time_us 22
2019/02/02 20:49:19 0D968779 r   (reader) ziggosc [mouse] Flush readed byte Nr 3 value 21 time_us 21
2019/02/02 20:49:19 0D968779 r   (reader) ziggosc [mouse] Flush readed byte Nr 4 value 0e time_us 20
2019/02/02 20:49:19 0D968779 r   (reader) ziggosc [mouse] Flush readed byte Nr 5 value 49 time_us 21
2019/02/02 20:49:19 0D968779 r   (reader) ziggosc [mouse] Flush readed byte Nr 6 value 52 time_us 1915
2019/02/02 20:49:19 0D968779 r   (reader) ziggosc [mouse] Flush readed byte Nr 7 value 44 time_us 21
2019/02/02 20:49:19 0D968779 r   (reader) ziggosc [mouse] Flush readed byte Nr 8 value 45 time_us 14910
2019/02/02 20:49:19 0D968779 r   (reader) ziggosc [mouse] Flush readed byte Nr 9 value 54 time_us 21
2019/02/02 20:49:19 0D968779 r   (reader) ziggosc [mouse] Flush readed byte Nr 10 value 4f time_us 21
2019/02/02 20:49:19 0D968779 r   (reader) ziggosc [mouse] Flush readed byte Nr 11 value 20 time_us 20
2019/02/02 20:49:19 0D968779 r   (reader) ziggosc [mouse] Flush readed byte Nr 12 value 41 time_us 20
2019/02/02 20:49:19 0D968779 r   (reader) ziggosc [mouse] Flush readed byte Nr 13 value 43 time_us 20
2019/02/02 20:49:19 0D968779 r   (reader) ziggosc [mouse] Flush readed byte Nr 14 value 53 time_us 20
2019/02/02 20:49:19 0D968779 r   (reader) ziggosc [mouse] Flush readed byte Nr 15 value 20 time_us 20
2019/02/02 20:49:19 0D968779 r   (reader) ziggosc [mouse] Flush readed byte Nr 16 value 56 time_us 20
2019/02/02 20:49:19 0D968779 r   (reader) ziggosc [mouse] Flush readed byte Nr 17 value 37 time_us 20
2019/02/02 20:49:19 0D968779 r   (reader) ziggosc [mouse] Flush readed byte Nr 18 value 2e time_us 19
2019/02/02 20:49:19 0D968779 r   (reader) ziggosc [mouse] Flush readed byte Nr 19 value 30 time_us 20
2019/02/02 20:49:19 0D968779 r   (reader) ziggosc [mouse] Flush readed byte Nr 20 value 9f time_us 20
2019/02/02 20:49:19 0D968779 r   (reader) ziggosc [mouse] Buffers readed  20 bytes total time_us 108729
2019/02/02 20:49:19 0D968779 r   (reader) ziggosc [mouse] Buffers readed  0 bytes total time_us 75124
2019/02/02 20:49:19 0D968779 r   (reader) ziggosc [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=600, cardmhz=600)
2019/02/02 20:49:21 00000000 s     (main) init for all local cards done
2019/02/02 20:49:21 00000000 s (emmcache) loaded 0 emmcache records from /tmp/.oscam/oscam.emmcache in 0 ms
2019/02/02 20:49:21 00000000 s (emmcache) loaded 0 emmstat records from /tmp/.oscam/oscam.emmstat in 0 ms
2019/02/02 20:49:21 00000000 s (anticasc) anti cascading disabled
2019/02/02 20:49:21 4948AA91 c   (client) plain dvbapi-client granted (anonymous, au=off)
2019/02/02 20:49:21 27FB8D06 c  (newcamd) client connected to 9001 port
2019/02/02 20:49:21 4948AA91 c   (dvbapi) dvbapi channelcache loaded from /usr/local/etc/oscam.ccache
2019/02/02 20:49:21 4948AA91 c   (dvbapi) Using TCP listen socket, API forced to DVBAPIv3 (0), userconfig boxtype: 11
2019/02/02 20:49:21 27FB8D06 c   (client) encrypted newcamd:9001-client 127.0.0.1 granted (user1, au=off)
2019/02/02 20:49:21 27FB8D06 c  (newcamd) user user1 authenticated successfully (Tvheadend)
2019/02/02 20:49:21 27FB8D06 c  (newcamd) AU disabled for user user1
2019/02/02 20:49:21 27FB8D06 c  (newcamd) no valid PROVID(s) found in CAID for user 'user1'
2019/02/02 20:49:21 27FB8D06 c   (client) user1 disconnected from 127.0.0.1
2019/02/02 20:49:24 08174F02 c  (newcamd) client connected to 9001 port
2019/02/02 20:49:24 08174F02 c   (client) encrypted newcamd:9001-client 127.0.0.1 granted (user1, au=off)
2019/02/02 20:49:24 08174F02 c  (newcamd) user user1 authenticated successfully (Tvheadend)
2019/02/02 20:49:24 08174F02 c  (newcamd) AU disabled for user user1
2019/02/02 20:49:24 08174F02 c  (newcamd) no valid PROVID(s) found in CAID for user 'user1'
2019/02/02 20:49:24 08174F02 c   (client) user1 disconnected from 127.0.0.1
2019/02/02 20:49:27 6664ECDB c  (newcamd) client connected to 9001 port
2019/02/02 20:49:27 6664ECDB c   (client) encrypted newcamd:9001-client 127.0.0.1 granted (user1, au=off)
2019/02/02 20:49:27 6664ECDB c  (newcamd) user user1 authenticated successfully (Tvheadend)
2019/02/02 20:49:27 6664ECDB c  (newcamd) AU disabled for user user1
2019/02/02 20:49:27 6664ECDB c  (newcamd) no valid PROVID(s) found in CAID for user 'user1'
2019/02/02 20:49:27 6664ECDB c   (client) user1 disconnected from 127.0.0.1
2019/02/02 20:49:30 30E81120 c  (newcamd) client connected to 9001 port
2019/02/02 20:49:30 30E81120 c   (client) encrypted newcamd:9001-client 127.0.0.1 granted (user1, au=off)
2019/02/02 20:49:30 30E81120 c  (newcamd) user user1 authenticated successfully (Tvheadend)
2019/02/02 20:49:30 30E81120 c  (newcamd) AU disabled for user user1
2019/02/02 20:49:30 30E81120 c  (newcamd) no valid PROVID(s) found in CAID for user 'user1'
2019/02/02 20:49:30 30E81120 c   (client) user1 disconnected from 127.0.0.1
2019/02/02 20:49:33 7C984E60 c  (newcamd) client connected to 9001 port
2019/02/02 20:49:33 7C984E60 c   (client) encrypted newcamd:9001-client 127.0.0.1 granted (user1, au=off)
2019/02/02 20:49:33 7C984E60 c  (newcamd) user user1 authenticated successfully (Tvheadend)
2019/02/02 20:49:33 7C984E60 c  (newcamd) AU disabled for user user1
2019/02/02 20:49:33 7C984E60 c  (newcamd) no valid PROVID(s) found in CAID for user 'user1'
2019/02/02 20:49:33 7C984E60 c   (client) user1 disconnected from 127.0.0.1
2019/02/02 20:49:36 048DFEDE c  (newcamd) client connected to 9001 port
2019/02/02 20:49:36 048DFEDE c   (client) encrypted newcamd:9001-client 127.0.0.1 granted (user1, au=off)
2019/02/02 20:49:36 048DFEDE c  (newcamd) user user1 authenticated successfully (Tvheadend)
2019/02/02 20:49:36 048DFEDE c  (newcamd) AU disabled for user user1
2019/02/02 20:49:36 048DFEDE c  (newcamd) no valid PROVID(s) found in CAID for user 'user1'
2019/02/02 20:49:36 048DFEDE c   (client) user1 disconnected from 127.0.0.1
2019/02/02 20:49:39 1EA74C2F c  (newcamd) client connected to 9001 port
2019/02/02 20:49:39 1EA74C2F c   (client) encrypted newcamd:9001-client 127.0.0.1 granted (user1, au=off)
2019/02/02 20:49:39 1EA74C2F c  (newcamd) user user1 authenticated successfully (Tvheadend)
2019/02/02 20:49:39 1EA74C2F c  (newcamd) AU disabled for user user1
2019/02/02 20:49:39 1EA74C2F c  (newcamd) no valid PROVID(s) found in CAID for user 'user1'
2019/02/02 20:49:39 1EA74C2F c   (client) user1 disconnected from 127.0.0.1
2019/02/02 20:49:42 0B92ED13 c  (newcamd) client connected to 9001 port
2019/02/02 20:49:42 0B92ED13 c   (client) encrypted newcamd:9001-client 127.0.0.1 granted (user1, au=off)
2019/02/02 20:49:42 0B92ED13 c  (newcamd) user user1 authenticated successfully (Tvheadend)
2019/02/02 20:49:42 0B92ED13 c  (newcamd) AU disabled for user user1
2019/02/02 20:49:42 0B92ED13 c  (newcamd) no valid PROVID(s) found in CAID for user 'user1'
2019/02/02 20:49:42 0B92ED13 c   (client) user1 disconnected from 127.0.0.1
2019/02/02 20:49:45 4BCA1ECE c  (newcamd) client connected to 9001 port
2019/02/02 20:49:45 4BCA1ECE c   (client) encrypted newcamd:9001-client 127.0.0.1 granted (user1, au=off)
2019/02/02 20:49:45 4BCA1ECE c  (newcamd) user user1 authenticated successfully (Tvheadend)
2019/02/02 20:49:45 4BCA1ECE c  (newcamd) AU disabled for user user1
2019/02/02 20:49:45 4BCA1ECE c  (newcamd) no valid PROVID(s) found in CAID for user 'user1'
2019/02/02 20:49:45 4BCA1ECE c   (client) user1 disconnected from 127.0.0.1 

-------------------------------------------------------------------------------
>> OSCam <<  cardserver log switched at Sat Feb  2 20:49:19 2019
-------------------------------------------------------------------------------
2019/02/02 20:49:19 00000000 s >> OSCam << cardserver log switched, version 1.20_svn, build r11478 (arm-linux-gnueabihf)
2019/02/02 20:49:19 00000000 s     (main) System name    = Linux
2019/02/02 20:49:19 00000000 s     (main) Host name      = tvheadend
2019/02/02 20:49:19 00000000 s     (main) Release        = 4.14.78-4-osmc
2019/02/02 20:49:19 00000000 s     (main) Version        = #1 SMP PREEMPT Wed Dec 12 17:58:11 UTC 2018
2019/02/02 20:49:19 00000000 s     (main) Machine        = armv7l
2019/02/02 20:49:19 00000000 s     (main) creating pidfile /var/run/oscam.pid with pid 15009
2019/02/02 20:49:19 00000000 s   (config) userdb reloaded: 4 accounts loaded, 0 expired, 0 disabled
2019/02/02 20:49:19 00000000 s     (main) signal handling initialized
2019/02/02 20:49:19 00000000 s      (net) monitor: initialized (fd=5, port=988)
2019/02/02 20:49:19 00000000 s      (net) newcamd: initialized (fd=6, port=9001)
2019/02/02 20:49:19 00000000 s      (net) -> CAID: 0606 PROVID: 000000
2019/02/02 20:49:19 00000000 s   (reader) ziggosc [mouse] creating thread for device /dev/ttyUSB0
2019/02/02 20:49:19 00000000 s     (main) waiting for local card init
2019/02/02 20:49:19 41F31EC4 h    (webif) webif: decompressed 178748 bytes back into 440288 bytes
2019/02/02 20:49:19 41F31EC4 h    (webif) HTTP Server running. ip=0.0.0.0 port=8888
2019/02/02 20:49:19 0D968779 r   (reader) ziggosc [mouse] Flush readed byte Nr 1 value 3b time_us 14290
2019/02/02 20:49:19 0D968779 r   (reader) ziggosc [mouse] Flush readed byte Nr 2 value 9f time_us 22
2019/02/02 20:49:19 0D968779 r   (reader) ziggosc [mouse] Flush readed byte Nr 3 value 21 time_us 21
2019/02/02 20:49:19 0D968779 r   (reader) ziggosc [mouse] Flush readed byte Nr 4 value 0e time_us 20
2019/02/02 20:49:19 0D968779 r   (reader) ziggosc [mouse] Flush readed byte Nr 5 value 49 time_us 21
2019/02/02 20:49:19 0D968779 r   (reader) ziggosc [mouse] Flush readed byte Nr 6 value 52 time_us 1915
2019/02/02 20:49:19 0D968779 r   (reader) ziggosc [mouse] Flush readed byte Nr 7 value 44 time_us 21
2019/02/02 20:49:19 0D968779 r   (reader) ziggosc [mouse] Flush readed byte Nr 8 value 45 time_us 14910
2019/02/02 20:49:19 0D968779 r   (reader) ziggosc [mouse] Flush readed byte Nr 9 value 54 time_us 21
2019/02/02 20:49:19 0D968779 r   (reader) ziggosc [mouse] Flush readed byte Nr 10 value 4f time_us 21
2019/02/02 20:49:19 0D968779 r   (reader) ziggosc [mouse] Flush readed byte Nr 11 value 20 time_us 20
2019/02/02 20:49:19 0D968779 r   (reader) ziggosc [mouse] Flush readed byte Nr 12 value 41 time_us 20
2019/02/02 20:49:19 0D968779 r   (reader) ziggosc [mouse] Flush readed byte Nr 13 value 43 time_us 20
2019/02/02 20:49:19 0D968779 r   (reader) ziggosc [mouse] Flush readed byte Nr 14 value 53 time_us 20
2019/02/02 20:49:19 0D968779 r   (reader) ziggosc [mouse] Flush readed byte Nr 15 value 20 time_us 20
2019/02/02 20:49:19 0D968779 r   (reader) ziggosc [mouse] Flush readed byte Nr 16 value 56 time_us 20
2019/02/02 20:49:19 0D968779 r   (reader) ziggosc [mouse] Flush readed byte Nr 17 value 37 time_us 20
2019/02/02 20:49:19 0D968779 r   (reader) ziggosc [mouse] Flush readed byte Nr 18 value 2e time_us 19
2019/02/02 20:49:19 0D968779 r   (reader) ziggosc [mouse] Flush readed byte Nr 19 value 30 time_us 20
2019/02/02 20:49:19 0D968779 r   (reader) ziggosc [mouse] Flush readed byte Nr 20 value 9f time_us 20
2019/02/02 20:49:19 0D968779 r   (reader) ziggosc [mouse] Buffers readed  20 bytes total time_us 108729
2019/02/02 20:49:19 0D968779 r   (reader) ziggosc [mouse] Buffers readed  0 bytes total time_us 75124
2019/02/02 20:49:19 0D968779 r   (reader) ziggosc [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=600, cardmhz=600)
2019/02/02 20:49:21 00000000 s     (main) init for all local cards done
2019/02/02 20:49:21 00000000 s (emmcache) loaded 0 emmcache records from /tmp/.oscam/oscam.emmcache in 0 ms
2019/02/02 20:49:21 00000000 s (emmcache) loaded 0 emmstat records from /tmp/.oscam/oscam.emmstat in 0 ms
2019/02/02 20:49:21 00000000 s (anticasc) anti cascading disabled
2019/02/02 20:49:21 4948AA91 c   (client) plain dvbapi-client granted (anonymous, au=off)
2019/02/02 20:49:21 27FB8D06 c  (newcamd) client connected to 9001 port
2019/02/02 20:49:21 4948AA91 c   (dvbapi) dvbapi channelcache loaded from /usr/local/etc/oscam.ccache
2019/02/02 20:49:21 4948AA91 c   (dvbapi) Using TCP listen socket, API forced to DVBAPIv3 (0), userconfig boxtype: 11
2019/02/02 20:49:21 27FB8D06 c   (client) encrypted newcamd:9001-client 127.0.0.1 granted (user1, au=off)
2019/02/02 20:49:21 27FB8D06 c  (newcamd) user user1 authenticated successfully (Tvheadend)
2019/02/02 20:49:21 27FB8D06 c  (newcamd) AU disabled for user user1
2019/02/02 20:49:21 27FB8D06 c  (newcamd) no valid PROVID(s) found in CAID for user 'user1'
2019/02/02 20:49:21 27FB8D06 c   (client) user1 disconnected from 127.0.0.1
2019/02/02 20:49:24 08174F02 c  (newcamd) client connected to 9001 port
2019/02/02 20:49:24 08174F02 c   (client) encrypted newcamd:9001-client 127.0.0.1 granted (user1, au=off)
2019/02/02 20:49:24 08174F02 c  (newcamd) user user1 authenticated successfully (Tvheadend)
2019/02/02 20:49:24 08174F02 c  (newcamd) AU disabled for user user1
2019/02/02 20:49:24 08174F02 c  (newcamd) no valid PROVID(s) found in CAID for user 'user1'
2019/02/02 20:49:24 08174F02 c   (client) user1 disconnected from 127.0.0.1
2019/02/02 20:49:27 6664ECDB c  (newcamd) client connected to 9001 port
2019/02/02 20:49:27 6664ECDB c   (client) encrypted newcamd:9001-client 127.0.0.1 granted (user1, au=off)
2019/02/02 20:49:27 6664ECDB c  (newcamd) user user1 authenticated successfully (Tvheadend)
2019/02/02 20:49:27 6664ECDB c  (newcamd) AU disabled for user user1
2019/02/02 20:49:27 6664ECDB c  (newcamd) no valid PROVID(s) found in CAID for user 'user1'
2019/02/02 20:49:27 6664ECDB c   (client) user1 disconnected from 127.0.0.1
2019/02/02 20:49:30 30E81120 c  (newcamd) client connected to 9001 port
2019/02/02 20:49:30 30E81120 c   (client) encrypted newcamd:9001-client 127.0.0.1 granted (user1, au=off)
2019/02/02 20:49:30 30E81120 c  (newcamd) user user1 authenticated successfully (Tvheadend)
2019/02/02 20:49:30 30E81120 c  (newcamd) AU disabled for user user1
2019/02/02 20:49:30 30E81120 c  (newcamd) no valid PROVID(s) found in CAID for user 'user1'
2019/02/02 20:49:30 30E81120 c   (client) user1 disconnected from 127.0.0.1
2019/02/02 20:49:33 7C984E60 c  (newcamd) client connected to 9001 port
2019/02/02 20:49:33 7C984E60 c   (client) encrypted newcamd:9001-client 127.0.0.1 granted (user1, au=off)
2019/02/02 20:49:33 7C984E60 c  (newcamd) user user1 authenticated successfully (Tvheadend)
2019/02/02 20:49:33 7C984E60 c  (newcamd) AU disabled for user user1
2019/02/02 20:49:33 7C984E60 c  (newcamd) no valid PROVID(s) found in CAID for user 'user1'
2019/02/02 20:49:33 7C984E60 c   (client) user1 disconnected from 127.0.0.1
2019/02/02 20:49:36 048DFEDE c  (newcamd) client connected to 9001 port
2019/02/02 20:49:36 048DFEDE c   (client) encrypted newcamd:9001-client 127.0.0.1 granted (user1, au=off)
2019/02/02 20:49:36 048DFEDE c  (newcamd) user user1 authenticated successfully (Tvheadend)
2019/02/02 20:49:36 048DFEDE c  (newcamd) AU disabled for user user1
2019/02/02 20:49:36 048DFEDE c  (newcamd) no valid PROVID(s) found in CAID for user 'user1'
2019/02/02 20:49:36 048DFEDE c   (client) user1 disconnected from 127.0.0.1
2019/02/02 20:49:39 1EA74C2F c  (newcamd) client connected to 9001 port
2019/02/02 20:49:39 1EA74C2F c   (client) encrypted newcamd:9001-client 127.0.0.1 granted (user1, au=off)
2019/02/02 20:49:39 1EA74C2F c  (newcamd) user user1 authenticated successfully (Tvheadend)
2019/02/02 20:49:39 1EA74C2F c  (newcamd) AU disabled for user user1
2019/02/02 20:49:39 1EA74C2F c  (newcamd) no valid PROVID(s) found in CAID for user 'user1'
2019/02/02 20:49:39 1EA74C2F c   (client) user1 disconnected from 127.0.0.1
2019/02/02 20:49:42 0B92ED13 c  (newcamd) client connected to 9001 port
2019/02/02 20:49:42 0B92ED13 c   (client) encrypted newcamd:9001-client 127.0.0.1 granted (user1, au=off)
2019/02/02 20:49:42 0B92ED13 c  (newcamd) user user1 authenticated successfully (Tvheadend)
2019/02/02 20:49:42 0B92ED13 c  (newcamd) AU disabled for user user1
2019/02/02 20:49:42 0B92ED13 c  (newcamd) no valid PROVID(s) found in CAID for user 'user1'
2019/02/02 20:49:42 0B92ED13 c   (client) user1 disconnected from 127.0.0.1
2019/02/02 20:49:45 4BCA1ECE c  (newcamd) client connected to 9001 port
2019/02/02 20:49:45 4BCA1ECE c   (client) encrypted newcamd:9001-client 127.0.0.1 granted (user1, au=off)
2019/02/02 20:49:45 4BCA1ECE c  (newcamd) user user1 authenticated successfully (Tvheadend)
2019/02/02 20:49:45 4BCA1ECE c  (newcamd) AU disabled for user user1
2019/02/02 20:49:45 4BCA1ECE c  (newcamd) no valid PROVID(s) found in CAID for user 'user1'
2019/02/02 20:49:45 4BCA1ECE c   (client) user1 disconnected from 127.0.0.1

 

Link naar reactie
Delen op andere sites
Codx Superster

Codx

Geplaatst:
Geplaatst: (aangepast)

Kaart wordt nog steeds niet gelezen, dat moet je eerst oplossen. 

aangepast door Codx

SCHOTEL: 1,2 Mtr 50E-55W / 60cm Astra 19/23 / Airspy R2 SDR 24-1800 Mhz
RECEIVERS: Dreambox 920 UHD/DM8000/800SE / VU+ Ultimo 4K Sat & Kabel & T2 / Rpi2 ADS-B FlightFeeder

IPTV:  KPN Glas (AoN) 1 Gbit & IPTV Arris VIP5202 / Android 4K IPTV box / Kodi & Netflix / 100+ TB Storage

Link naar reactie
Delen op andere sites

Maak een account aan of log in om te reageren

Je moet een lid zijn om een reactie te kunnen achterlaten

Account aanmaken

Registreer voor een nieuwe account in onze community. Het is erg gemakkelijk!

Registreer een nieuwe account

Inloggen

Heb je reeds een account? Log hier in.

Nu inloggen
 Delen
Ga naar topic overzicht

  • Wie is er online   0 leden

    • Er zijn geen geregistreerde gebruikers deze pagina aan het bekijken
×
×
  • Nieuwe aanmaken...