Cccam clients laten connecten op een OSCAM server

[maarten007]

beste mensen

 

ik ben aan het hobby-en met een oscam server

ik zou graag willen weten hoe een oscam.conf eruit zou moeten zien om cccam clients direct daarop te laten inloggen

 

mijn oscam.server ziet er zo uit 

 

[reader]

label = xxxxx

protocol = cccam

device = /dev/ttyUSB1

autospeed = 0

caid = xxxx

boxkey = xxxxxxxxxxxxxxx

rsakey = xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

detect = cd

mhz = 600

cardmhz = 2700

ident = xxxx:000000

group = 1

dropbadcws = 1 

 

 

[lucsch]

Neem een kijkje hier:

www.sat4all.com/forums/topic/319997-oscam-als-cccam-server

[muppet]

Kom je er niet uit dan horen wij het wel

[maarten007]

ik ben weer een stuk verder. maar ik heb nog geen beeld.

ik loop aan tegen de meldingen - oscam no matching reader rejected group

 

server :

[reader]

label = a

enable = 1

protocol = mouse

device = /dev/ttyUSB0

autospeed = 0

 

caid = xxxx

boxkey = 

rsakey =

detect = cd

mhz = 600

cardmhz = 2700

ident = 0604:000000

group = 1

dropbadcws = 1 

 

 

conf:

[global]

# Prozess

nice                        = -10

pidfile                     = /tmp/oscam.pid

# Logging

logfile                     = stdout

disablelog                  = 0

maxlogsize                  = 256

usrfile                     = /tmp/oscam_user.log

disableuserfile             = 0

usrfileflag                 = 1

 

 

[monitor]

port                        = 15990

#nocrypt                     = 127.0.0.1,192.168.0.0-192.168.0.255 # "No entry for other IP's!"

aulow                       = 30

hideclient_to               = 0

monlevel                    = 4

 

 

[webif]

httpport = 8888

httpuser = root

httppwd = root

httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255

 

[cccam]

port = 11021

version = 2.2.1

reshare = 3

reshare_mode = 4

ignorereshare = 0

minimizecards = 0

keepconnected = 1

nodeid = 0a0b0c0d0e0f1215

 

 

 

user :

[account]

user = dvbapiau

pwd =

disabled = 0

group = 1

au = 1

 

[account]

user = DM-8000

pwd = dreambox

disabled = 0

uniq = 3

sleep = 0

monlevel = 0

cccmaxhops = 10

cccreshare = 1

cccignorereshare = 1

keepalive = 1

group = 1

[mebo870]

ik had ook een vraag, heeft het enig voordeel om als CCcam cliënt te connectoren op een Oscam ten opzichte van CCcam naar CCcam

Gelden dan de voorwaarden of parameters van Oscam of die van CCcam.

[muppet]

Cccam is al 2 jaar niet geüpdatet oscam word regelmatig geupdat probeer daarom zoveel mogelijk oscam te gebruiken.

[lucsch]

@Maarten,

Kan je de log van oscam bij het opstarten hier kunnen posten?

Ik heb het vermoeden dat de frequentie te hoog is, maar dat zou te zien zijn in de log.

[maarten007]

@lucsch

 

 

11        0 s >> OSCam <<  cardserver started, version 1.20-unstable_svn, build r10769 (x86_64-redhat-linux)

12:38:11        0 s     (main) System name    = Linux

12:38:11        0 s     (main) Host name      = localhost.localdomain

12:38:11        0 s     (main) Release        = 2.6.41.10-3.fc15.x86_64

12:38:11        0 s     (main) Version        = #1 SMP Mon Jan 23 15:46:37 UTC 2012

12:38:11        0 s     (main) Machine        = x86_64

12:38:11        0 s     (main) creating pidfile /tmp/oscam.pid with pid 29226

12:38:11        0 s   (config) services reloaded: 0 services freed, 12 services loaded, rejected 0

12:38:11        0 s   (config) userdb reloaded: 4 accounts loaded, 0 expired, 0 disabled

12:38:11        0 s     (main) signal handling initialized

12:38:11        0 s   (config) 10 provid's loaded

12:38:11        0 s      (net) monitor: initialized (fd=5, port=15990)

12:38:11        0 s      (net) cccam: initialized (fd=6, port=11021)

12:38:11        0 s   (reader) Ziggo [mouse] creating thread for device /dev/ttyUSB19

12:38:11        0 s     (stat) loadbalancer: could not open /tmp/.oscam/stat for reading (errno=2 No such file or directory)

12:38:11        0 s     (main) waiting for local card init

12:38:11 AC0008C0 h    (webif) webif: decompressed 162945 bytes back into 389048 bytes

12:38:11 AC0008C0 h    (webif) HTTP Server running. ip=0.0.0.0 port=8888

12:38:11  197B950 r   (reader) Ziggo [mouse] Buffers readed  0 bytes total time_us 75097

12:38:11  197B950 r   (reader) Ziggo [mouse] Flush readed byte Nr 1 value 3b time_us 3636

12:38:11  197B950 r   (reader) Ziggo [mouse] Flush readed byte Nr 2 value 9f time_us 1136

12:38:11  197B950 r   (reader) Ziggo [mouse] Flush readed byte Nr 3 value 21 time_us 1085

12:38:11  197B950 r   (reader) Ziggo [mouse] Flush readed byte Nr 4 value 0e time_us 1110

12:38:11  197B950 r   (reader) Ziggo [mouse] Flush readed byte Nr 5 value 49 time_us 1112

12:38:11  197B950 r   (reader) Ziggo [mouse] Flush readed byte Nr 6 value 52 time_us 1110

12:38:11  197B950 r   (reader) Ziggo [mouse] Flush readed byte Nr 7 value 44 time_us 1112

12:38:11  197B950 r   (reader) Ziggo [mouse] Flush readed byte Nr 8 value 45 time_us 1130

12:38:11  197B950 r   (reader) Ziggo [mouse] Flush readed byte Nr 9 value 54 time_us 1222

12:38:11  197B950 r   (reader) Ziggo [mouse] Flush readed byte Nr 10 value 4f time_us 1109

12:38:11  197B950 r   (reader) Ziggo [mouse] Flush readed byte Nr 11 value 20 time_us 1113

12:38:11  197B950 r   (reader) Ziggo [mouse] Flush readed byte Nr 12 value 41 time_us 1114

12:38:11  197B950 r   (reader) Ziggo [mouse] Flush readed byte Nr 13 value 43 time_us 1109

12:38:11  197B950 r   (reader) Ziggo [mouse] Flush readed byte Nr 14 value 53 time_us 1113

12:38:11  197B950 r   (reader) Ziggo [mouse] Flush readed byte Nr 15 value 20 time_us 1126

12:38:11  197B950 r   (reader) Ziggo [mouse] Flush readed byte Nr 16 value 56 time_us 1098

12:38:11  197B950 r   (reader) Ziggo [mouse] Flush readed byte Nr 17 value 35 time_us 1113

12:38:11  197B950 r   (reader) Ziggo [mouse] Flush readed byte Nr 18 value 2e time_us 1112

12:38:11  197B950 r   (reader) Ziggo [mouse] Flush readed byte Nr 19 value 38 time_us 1238

12:38:11  197B950 r   (reader) Ziggo [mouse] Flush readed byte Nr 20 value 95 time_us 1112

12:38:11  197B950 r   (reader) Ziggo [mouse] Buffers readed  20 bytes total time_us 100369

12:38:11  197B950 r   (reader) Ziggo [mouse] Reader initialized (device=/dev/ttyUSB19, detect=cd, pll max=27.00 MHz, wanted mhz=6.00 MHz)

12:38:11  197B950 r   (reader) Ziggo [mouse] Reader sci internal, detected box type: generic

12:38:12  197B950 r   (reader) Ziggo [mouse] card detected

12:38:12  197B950 r   (reader) Ziggo [mouse] Buffers readed  0 bytes total time_us 75095

12:38:13  197B950 r   (reader) Ziggo [mouse] ATR: 3B 9F 21 0E 49 52 44 45 54 4F 20 41 43 53 20 56 35 2E 38 95

12:38:13  197B950 r   (reader) Ziggo [mouse] Init card protocol T14, FI=2, F=558, D=1, N=0

12:38:13  197B950 r   (reader) Ziggo [mouse] Calculated work ETU is 103.33 us reader mhz = 540

12:38:1312:39:16  197DE50 c      (ecm) DM-8000 (0604@000000/000B/4C05/44:C64A8995B4BE4C11CB3F6340E4CD0B75): rejected group (0 ms) (no matching reader)

12:39:16  197DE50 c      (ecm) DM-8000 (0604@000000/270E/4C05/44:FCCFB305F71346B1CB21A4BC938155ED): rejected group (0 ms) (no matching reader)

12:39:36  197DE50 c      (ecm) DM-8000 (0604@000000/000B/4C05/44:D2BC32FDF86C33EBE2436D637734DE91): rejected group (0 ms) (no matching reader)

12:39:36  197DE50 c      (ecm) DM-8000 (0604@000000/270E/4C05/44:38717AF4742DE56ACE38690AF3CC87E0): rejected group (0 ms) (no matching reader)

12:39:56  197DE50 c      (ecm) DM-8000 (0604@000000/000B/4C05/44:FDCAF62FF9BF55D45F964D0A09146AC6): rejected group (0 ms) (no matching reader)

12:39:56  197DE50 c      (ecm) DM-8000 (0604@000000/270E/4C05/44:420D666BC7889028CE0688C6610F189E): rejected group (0 ms) (no matching reader)

17 juni 2015 aangepast door maarten007

[lucsch]

@Maarten,

Welke cardreader gebruik je?

[maarten007]

@Maarten,

Welke cardreader gebruik je?

smartreader smargo , die blauwe

[lucsch]

@Maarten,

Dan moet je in oscam.server het protocol wijzigen.

Ik heb:

 

[reader]

label                         = ziggo

description                   = Ziggo reader

protocol                      = smartreader

device                        = Serial:Reader 152

caid                          = 0604

boxkey                        = xxxxx

rsakey                        = xxxxxxxx

detect                        = cd

mhz                           = 600

cardmhz                       = 600

group                         = 1

emmcache                      = 1,1,2

auprovid                      = 000604

 

Ook zou je moeten kijken of je een programma list_smargo kunt vinden, zodat je device op de juiste manier kunt invullen.

[maarten007]

@lucsch

 

ik heb protocol = smargo . Het werkt nu

 

Dank je voor je hulp