dm8000hd Oscam configureren

[CB1]

Ik wou dit deleten uit het ci topic maar kan niet.

Kan het beter hier vragen denk ik.

Ben bezig om oscam aan de praat te krijgen met een ziggo irdeto kaart.

Oscam ziet de kaart wel intern maar ik krijg geen beeld.

Ik gebruik normaal CCcam en gaat 100% maar ik wil oscam wat beter leren kennen.ű

Wie kan mij helpen.

 

Gr Cb1

[theparasol]

probeer eens:

 

oscam.server

 

[reader]

label = ziggo

protocol = internal

detect = CD

device = /dev/sci0

group = 1

emmcache = 1,3,2

caid = 0604

rsakey = 3C8633AAC0D367533DEC7BB2EEEDEB8CA3ADA52E58B99BB34672783277A1DAAC3B6106AD0909774E031B2A6E30195B437683AD0FC599B87D08CEA47BE1B6C

boxkey = 112233445566778899aabbccddeeff

[theparasol]

Dit kun je ook nog proberen:

 

[reader]

label = ziggo

protocol = internal

device = /dev/sci0

caid = 0604

force_irdeto = 1

[CB1]

Heb allebei geprobeerd maar krijg deze melding

 

2011/12/05 20:05:52 0 ziggo card detected

2011/12/05 20:05:55 554500 r ATR: 3B 9F 21 0E 49 52 44 45 54 4F 20 41 43 53 20 56 35 2E 37 9A

2011/12/05 20:05:56 554500 r Maximum frequency for this card is formally 6 Mhz, clocking it to 6.00 Mhz

2011/12/05 20:05:57 554500 r detect irdeto card

2011/12/05 20:05:57 554500 r Irdeto SC 57 version 12 revision 1, patch level e

2011/12/05 20:05:57 554500 r caid: 0604, acs: 6.08, country code: NLD

2011/12/05 20:05:57 554500 r providers: 4, ascii serial: xxxxxxxxxx, hex serial: xxxxxx, hex base: xx

2011/12/05 20:06:00 554500 r WARNING: For Irdeto cards you will have to set 'cardmhz = 600' in oscam.server

2011/12/05 20:06:00 554500 r active providers: 4 (070271,007800,007800,007800)

2011/12/05 20:06:00 554500 r found cardsystem irdeto

2011/12/05 20:06:00 554500 r entitlements for provider: 1, id: 070271

2011/12/05 20:06:00 554500 r chid: FFE0, date: 2005/09/21 - 2005/10/21

2011/12/05 20:06:00 554500 r chid: 01F4, date: 2005/09/15 - 2005/10/15

2011/12/05 20:06:00 554500 r chid: 01FE, date: 2005/09/15 - 2005/10/15

2011/12/05 20:06:00 554500 r chid: 0008, date: 2005/06/01 - 2005/07/01

2011/12/05 20:06:00 554500 r chid: 000B, date: 2005/09/21 - 2005/10/21

2011/12/05 20:06:01 554500 r chid: 0025, date: 2005/09/15 - 2005/10/15

2011/12/05 20:06:01 554500 r chid: 0027, date: 2005/09/15 - 2005/10/15

2011/12/05 20:06:01 554500 r chid: 0028, date: 2005/09/15 - 2005/10/15

2011/12/05 20:06:01 554500 r chid: 0384, date: 2005/09/21 - 2005/10/21

2011/12/05 20:06:01 554500 r chid: 0009, date: 2005/09/15 - 2005/10/15

2011/12/05 20:06:07 554500 r [irdeto-reader] ready for requests

2011/12/05 20:06:11 0 s init for all local cards done

2011/12/05 20:06:11 0 s anti cascading disabled

2011/12/05 20:06:11 559BF8 c plain dvbapi-client granted (anonymous, au=off)

2011/12/05 20:06:11 559BF8 c dvbapi: can't open priority file /etc/tuxbox/config/oscam-experimental/oscam.dvbapi

2011/12/05 20:06:12 559BF8 c dvbapi: [ADD PID 0] CAID: 0604 ECM_PID: 138C PROVID: 000000

2011/12/05 20:06:12 559BF8 c dvbapi: new program number: 2AFC (0604:2AFC unknown)

2011/12/05 20:06:13 559BF8 c dvbapi: Found 2 IRDETO ECM CHIDs

2011/12/05 20:06:13 559BF8 c dvbapi: trying irdeto chid index: 1

2011/12/05 20:06:13 559BF8 c anonymous (0604&000000/2AFC/44:D267): rejected group (0 ms) (0 of 0) (no matching reader)

2011/12/05 20:06:13 559BF8 c anonymous (0604&000000/2AFC/44:2DC1): rejected group (0 ms) (0 of 0) (no matching reader)

[quattro]

In de log staat dat cardmhz = 600 toegevoegd moet worden aan je reader. (zal het probleem niet zijn, maar

toch...)

AU staat uit, AU = 1 toevoegen aan oscam.Conf en AU = Ziggo in oscam.user.

 

Kun je de complete inhoud van de config files eens posten? Welke oscam build gebruik je?

[CB1]

oscam.server

 

 

[reader]

label = ziggo

protocol = internal

detect = CD

device = /dev/sci0

cardmhz = 600

group = 1

emmcache = 1,3,2

caid = 0604

AU = 1

rsakey = 3C8633AAC0D367533DEC7BB2EEEDEB8CA3ADA52E58B99BB34672783277A1DAAC3B6106AD0909774E031B2A6E30195B437683AD0FC599B87D08CEA47BE1B6C

boxkey = 112233445566778899aabbccddeeff

 

oscam.user

 

 

[account]

user = dvbapiau

pwd =

disabled = 0

group = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19

# put all reader groups otherwise you not have ecm from the non included group.

uniq = 3

monlevel = 0

au = ziggo

 

config

 

 

# oscam.conf generated automatically by Streamboard OSCAM 1.00-svn build #5630

# Read more: http://streamboard.gmc.to/oscam/browser/trunk/Distribution/doc/txt/oscam.conf.txt

 

[global]

disablelog = 1

disableuserfile = 1

#logfile = /media/usb/oscam/oscam.log

# first create the needed directory's and see if there is usb stick, cf or hdd

#usrfile = /media/usb/oscam/user.log

# first create the needed directory's and see if there is usb stick ,cf or hdd

#cwlogdir = /media/usb/oscam

# first create the needed directory's and see if there is usb stick ,cf or hdd

#emmlogdir = /media/usb/

# first create the needed directory's and see if there is usb stick ,cf or hdd

usrfileflag = 0

clienttimeout = 5

fallbacktimeout = 2500

serialreadertimeout = 1500

clientmaxidle = 120

dropdups = 1

failbantimE = 0

bindwait = 120

nice = -1

maxlogsize = 10

waitforcards = 1

waitforcards_extra_delay = 3000

preferlocalcards = 1

saveinithistory = 1

readerrestartseconds = 5

lb_mode = 1

lb_save = 0

lb_nbest_readers = 1

lb_nfb_readers = 1

lb_reopen_mode = 1

lb_reopen_seconds = 6

lb_retrylimit = 1600

 

[monitor]

port = 16500

monlevel = 4

nocrypt = 127.0.0.1,192.168.0.0-192.168.255.255,10.0.0.0-10.255.255.255

 

[webif]

httpport = 16200

httpuser = 1

httppwd = 2

httprefresh = 20

httpallowed = 0.0.0.0-255.255.255.255

httphideidleclients = 0

httpreadonly = 0

 

[cccam]

port = 12000

version = 2.2.1

reshare = 3

reshare_mode = 4

ignorereshare = 0

minimizecards = 0

keepconnected = 1

nodeid = 0a0b0c0d0e0f1215

 

[dvbapi]

enabled = 1

au = ziggo

user = dvbapiau

boxtype = dreambox

request_mode = 1

 

Ik gebruik de oscam 1.20

Deze is als het goed is de nieuwste

[CB1]

Log

 

2011/12/05 20:51:33 55C9E0 h HTTP Server listening on port 16200

2011/12/05 20:51:33 0 s loadbalancer: can't read from file /tmp/.oscam/stat

2011/12/05 20:51:33 0 s waiting for local card init

2011/12/05 20:51:33 55E160 r reader ziggo initialized (device=/dev/sci0, detect=cd, mhz=357, cardmhz=600)

2011/12/05 20:51:34 0 ziggo card detected

2011/12/05 20:51:36 55E160 r ATR: 3B 9F 21 0E 49 52 44 45 54 4F 20 41 43 53 20 56 35 2E 37 9A

2011/12/05 20:51:37 55E160 r Maximum frequency for this card is formally 6 Mhz, clocking it to 6.00 Mhz

2011/12/05 20:51:38 55E160 r detect irdeto card

2011/12/05 20:51:39 55E160 r Irdeto SC 57 version 12 revision 1, patch level e

2011/12/05 20:51:39 55E160 r caid: 0604, acs: 6.08, country code: NLD

2011/12/05 20:51:39 55E160 r providers: 4, ascii serial: xxxxxxxxxx, hex serial: xxxxxx, hex base: xx

2011/12/05 20:51:42 55E160 r active providers: 4 (070271,007800,007800,007800)

2011/12/05 20:51:42 55E160 r found cardsystem irdeto

2011/12/05 20:51:42 55E160 r entitlements for provider: 1, id: 070271

2011/12/05 20:51:42 55E160 r chid: FFE0, date: 2005/09/21 - 2005/10/21

2011/12/05 20:51:42 55E160 r chid: 01F4, date: 2005/09/15 - 2005/10/15

2011/12/05 20:51:42 55E160 r chid: 01FE, date: 2005/09/15 - 2005/10/15

2011/12/05 20:51:42 55E160 r chid: 0008, date: 2005/06/01 - 2005/07/01

2011/12/05 20:51:42 55E160 r chid: 000B, date: 2005/09/21 - 2005/10/21

2011/12/05 20:51:42 55E160 r chid: 0025, date: 2005/09/15 - 2005/10/15

2011/12/05 20:51:42 55E160 r chid: 0027, date: 2005/09/15 - 2005/10/15

2011/12/05 20:51:42 55E160 r chid: 0028, date: 2005/09/15 - 2005/10/15

2011/12/05 20:51:42 55E160 r chid: 0384, date: 2005/09/21 - 2005/10/21

2011/12/05 20:51:42 55E160 r chid: 0009, date: 2005/09/15 - 2005/10/15

2011/12/05 20:51:49 55E160 r [irdeto-reader] ready for requests

2011/12/05 20:51:52 0 s init for all local cards done

2011/12/05 20:51:52 0 s anti cascading disabled

2011/12/05 20:51:52 561CE0 c plain dvbapi-client granted (dvbapiau, au=on (1 reader))

2011/12/05 20:51:52 561CE0 c dvbapi: 2 entries read from oscam.dvbapi

2011/12/05 20:51:54 561CE0 c dvbapi: [ADD PID 0] CAID: 0604 ECM_PID: 138C PROVID: 000000

2011/12/05 20:51:54 561CE0 c dvbapi: new program number: 2AFC (0604:2AFC unknown)

2011/12/05 20:51:54 561CE0 c dvbapi: Found 2 IRDETO ECM CHIDs

2011/12/05 20:51:55 55E160 r Error processing ecm for caid 0604, srvid 2AFC (servicename: 0604:2AFC unknown) on reader ziggo.

2011/12/05 20:51:55 561CE0 c housekeeping lb stats thread started

2011/12/05 20:51:55 561CE0 c dvbapi: trying irdeto chid index: 1

2011/12/05 20:51:55 561CE0 c dvbapiau (0604&000000/2AFC/44:748A): not found (338 ms) by ziggo (ziggo irdeto_do_cmd [8] 9d 0

2011/12/05 20:51:55 55E160 r Error processing ecm for caid 0604, srvid 2AFC (servicename: 0604:2AFC unknown) on reader ziggo.

2011/12/05 20:51:55 561CE0 c dvbapiau (0604&000000/2AFC/44:264E): not found (281 ms) by ziggo (ziggo irdeto_do_cmd [2] 90 0

2011/12/05 20:52:19 561CE0 c dvbapi: trying irdeto chid index: 1

2011/12/05 20:52:19 561CE0 c dvbapiau (0604&000000/2AFC/44:304D): rejected group (0 ms) (no matching reader)

2011/12/05 20:52:19 561CE0 c dvbapiau (0604&000000/2AFC/44:6E08): rejected group (1 ms) (no matching reader)

2011/12/05 20:52:44 561CE0 c dvbapi: trying irdeto chid index: 1

2011/12/05 20:52:44 561CE0 c dvbapiau (0604&000000/2AFC/44:4B01): rejected group (0 ms) (no matching reader)

2011/12/05 20:52:44 561CE0 c dvbapiau (0604&000000/2AFC/44:2877): rejected group (0 ms) (no matching reader)

 

Meer als dit komt er niet voorbij helaas

[quattro]

oeps foutje van mij, AU omgedraaid in oscam.conf en oscam.user, maar blijkbaar krijg je hier geen foutmeldingen door.

Verder denk ik dat je het makkelijkste met zo kort mogelijke config files start. (alles wat er niet staat kan ook geen fouten veroorzaken!!!)

 

Probeer het volgende eens:

 

oscam.conf:

 

[global]

nice = -1

preferlocalcards = 1

lb_mode = 0

 

[dvbapi]

enabled = 1

au = 1

boxtype = dreambox

user = dvbapiau

request_mode = 1

 

[webif]

httpport = 16200

httpuser = 1

httppwd = 2

httpallowed = 0.0.0.0-255.255.255.255

 

Oscam.server

[reader]

label = ziggo

protocol = internal

device = /dev/sci0

detect = cd

cardmhz = 500

ident = 0604:000000

group = 1

emmcache = 1,3,2

 

Oscam.user

[account]

user = dvbapiau

group = 1

au = ziggo

[CB1]

Dit heb ik zo overgenomen en krijg dit als resultaat.

 

2011/12/05 21:32:44 55CC98 r WARNING: For Irdeto cards you will have to set 'cardmhz = 600' in oscam.server

2011/12/05 21:32:44 55CC98 r active providers: 4 (070271,007800,007800,007800)

2011/12/05 21:32:44 55CC98 r found cardsystem irdeto

2011/12/05 21:32:44 55CC98 r entitlements for provider: 1, id: 070271

2011/12/05 21:32:44 55CC98 r chid: FFE0, date: 2005/09/21 - 2005/10/21

2011/12/05 21:32:44 55CC98 r chid: 01F4, date: 2005/09/15 - 2005/10/15

2011/12/05 21:32:44 55CC98 r chid: 01FE, date: 2005/09/15 - 2005/10/15

2011/12/05 21:32:44 55CC98 r chid: 0008, date: 2005/06/01 - 2005/07/01

2011/12/05 21:32:44 55CC98 r chid: 000B, date: 2005/09/21 - 2005/10/21

2011/12/05 21:32:44 55CC98 r chid: 0025, date: 2005/09/15 - 2005/10/15

2011/12/05 21:32:44 55CC98 r chid: 0027, date: 2005/09/15 - 2005/10/15

2011/12/05 21:32:44 55CC98 r chid: 0028, date: 2005/09/15 - 2005/10/15

2011/12/05 21:32:44 55CC98 r chid: 0384, date: 2005/09/21 - 2005/10/21

2011/12/05 21:32:45 55CC98 r chid: 0009, date: 2005/09/15 - 2005/10/15

2011/12/05 21:32:51 55CC98 r [irdeto-reader] ready for requests

2011/12/05 21:32:52 0 s init for all local cards done

2011/12/05 21:32:52 0 s anti cascading disabled

2011/12/05 21:32:52 55FA80 c plain dvbapi-client granted (dvbapiau, au=on (1 reader))

2011/12/05 21:32:52 55FA80 c dvbapi: 2 entries read from oscam.dvbapi

2011/12/05 21:32:56 55FA80 c dvbapi: [ADD PID 0] CAID: 0604 ECM_PID: 138C PROVID: 000000

2011/12/05 21:32:56 55FA80 c dvbapi: new program number: 2AFC (0604:2AFC unknown)

2011/12/05 21:32:56 55FA80 c dvbapi: Found 2 IRDETO ECM CHIDs

2011/12/05 21:32:57 55CC98 r Error processing ecm for caid 0604, srvid 2AFC (servicename: 0604:2AFC unknown) on reader ziggo.

2011/12/05 21:32:57 55FA80 c dvbapi: trying irdeto chid index: 1

2011/12/05 21:32:57 55FA80 c dvbapiau (0604&000000/2AFC/44:7C8E): not found (339 ms) by ziggo (ziggo irdeto_do_cmd [8] 9d 0

2011/12/05 21:32:58 55CC98 r Error processing ecm for caid 0604, srvid 2AFC (servicename: 0604:2AFC unknown) on reader ziggo.

2011/12/05 21:32:58 55FA80 c dvbapiau (0604&000000/2AFC/44:2070): not found (285 ms) by ziggo (ziggo irdeto_do_cmd [2] 90 0

2011/12/05 21:33:09 55CC98 r Error processing ecm for caid 0604, srvid 2AFC (servicename: 0604:2AFC unknown) on reader ziggo.

2011/12/05 21:33:09 55FA80 c dvbapi: trying irdeto chid index: 1

2011/12/05 21:33:09 55FA80 c dvbapiau (0604&000000/2AFC/44:4664): not found (339 ms) by ziggo (ziggo irdeto_do_cmd [8] 9d 0

2011/12/05 21:33:10 55CC98 r Error processing ecm for caid 0604, srvid 2AFC (servicename: 0604:2AFC unknown) on reader ziggo.

2011/12/05 21:33:10 55FA80 c dvbapiau (0604&000000/2AFC/44:2946): not found (286 ms) by ziggo (ziggo irdeto_do_cmd [2] 90 0

2011/12/05 21:33:34 55CC98 r Error processing ecm for caid 0604, srvid 2AFC (servicename: 0604:2AFC unknown) on reader ziggo.

2011/12/05 21:33:34 55FA80 c dvbapi: trying irdeto chid index: 1

2011/12/05 21:33:34 55FA80 c dvbapiau (0604&000000/2AFC/44:D13B): not found (337 ms) by ziggo (ziggo irdeto_do_cmd [8] 9d 0

2011/12/05 21:33:35 55CC98 r Error processing ecm for caid 0604, srvid 2AFC (servicename: 0604:2AFC unknown) on reader ziggo.

2011/12/05 21:33:35 55FA80 c dvbapiau (0604&000000/2AFC/44:5438): not found (282 ms) by ziggo (ziggo irdeto_do_cmd [2] 90 0

 

Dit is direct na de regel met de serial

[quattro]

2 entries read from oscam.dvbapi

 

hoe ziet je oscam.dvbapi file er uit?

[CB1]

Ik heb die net na jou bericht aangepast.

Dit is de log

 

2011/12/05 21:58:58 55B608 r WARNING: For Irdeto cards you will have to set 'cardmhz = 600' in oscam.server

2011/12/05 21:58:59 55B608 r active providers: 4 (070271,007800,007800,007800)

2011/12/05 21:58:59 55B608 r found cardsystem irdeto

2011/12/05 21:58:59 55B608 r entitlements for provider: 1, id: 070271

2011/12/05 21:58:59 55B608 r chid: FFE0, date: 2005/09/21 - 2005/10/21

2011/12/05 21:58:59 55B608 r chid: 01F4, date: 2005/09/15 - 2005/10/15

2011/12/05 21:58:59 55B608 r chid: 01FE, date: 2005/09/22 - 2005/10/22

2011/12/05 21:58:59 55B608 r chid: 0008, date: 2005/06/01 - 2005/07/01

2011/12/05 21:58:59 55B608 r chid: 000B, date: 2005/09/21 - 2005/10/21

2011/12/05 21:58:59 55B608 r chid: 0025, date: 2005/09/15 - 2005/10/15

2011/12/05 21:58:59 55B608 r chid: 0027, date: 2005/09/15 - 2005/10/15

2011/12/05 21:58:59 55B608 r chid: 0028, date: 2005/09/15 - 2005/10/15

2011/12/05 21:58:59 55B608 r chid: 0384, date: 2005/09/21 - 2005/10/21

2011/12/05 21:58:59 55B608 r chid: 0009, date: 2005/09/15 - 2005/10/15

2011/12/05 21:59:06 55B608 r [irdeto-reader] ready for requests

2011/12/05 21:59:07 0 s init for all local cards done

2011/12/05 21:59:07 0 s anti cascading disabled

2011/12/05 21:59:07 560728 c plain dvbapi-client granted (dvbapiau, au=on (1 reader))

2011/12/05 21:59:07 560728 c dvbapi: 2 entries read from oscam.dvbapi

2011/12/05 21:59:11 560728 c dvbapi: [ADD PID 0] CAID: 0604 ECM_PID: 138C PROVID: 000000

2011/12/05 21:59:11 560728 c dvbapi: new program number: 2AFC (0604:2AFC unknown)

2011/12/05 21:59:11 560728 c dvbapi: Found 2 IRDETO ECM CHIDs

2011/12/05 21:59:12 55B608 r Error processing ecm for caid 0604, srvid 2AFC (servicename: 0604:2AFC unknown) on reader ziggo.

2011/12/05 21:59:12 560728 c dvbapi: trying irdeto chid index: 1

2011/12/05 21:59:12 560728 c dvbapiau (0604&000000/2AFC/44:9702): not found (338 ms) by ziggo (ziggo irdeto_do_cmd [8] 9d 0

2011/12/05 21:59:12 55B608 r Error processing ecm for caid 0604, srvid 2AFC (servicename: 0604:2AFC unknown) on reader ziggo.

2011/12/05 21:59:12 560728 c dvbapiau (0604&000000/2AFC/44:A44A): not found (281 ms) by ziggo (ziggo irdeto_do_cmd [2] 90 0

2011/12/05 21:59:24 55B608 r Error processing ecm for caid 0604, srvid 2AFC (servicename: 0604:2AFC unknown) on reader ziggo.

2011/12/05 21:59:24 560728 c dvbapi: trying irdeto chid index: 1

2011/12/05 21:59:24 560728 c dvbapiau (0604&000000/2AFC/44:B91C): not found (337 ms) by ziggo (ziggo irdeto_do_cmd [8] 9d 0

2011/12/05 21:59:25 55B608 r Error processing ecm for caid 0604, srvid 2AFC (servicename: 0604:2AFC unknown) on reader ziggo.

2011/12/05 21:59:25 560728 c dvbapiau (0604&000000/2AFC/44:75C5): not found (282 ms) by ziggo (ziggo irdeto_do_cmd [2] 90 0

 

En dit de oscam.dvbapi

 

#

# dvbapi configuration

#

# types:

# P - Priority

# format:

# P: <caid>:[<provider>]:[<srvid>]:[<ecmpid>]

# I - Ignore

# format:

# I: <caid>:[<provider>]:[<srvid>]:[<ecmpid>]

# M - Map

# format:

# M: <caid>:[<provider>]:[<srvid>]:[<ecmpid>] <target caid>:[<target provider>]

# D - Delay

# format:

# D: <caid>:[<provider>]:[<srvid>]:[<ecmpid>] <delay (ms)>

#

#

#

#p: 0500:023800 # prioritize 0500 with provider 023800

#P: :::1BCD # prioritize ecm stream with pid 1BCD on any channel

#P: 1722 # prioritize 1722

#P: 1830::EF75 # prioritize 1830 on channel EF75 only

#M: 1830 1830:003411 # map caid 1830 always to provider 003411

#D: 1702 200 # wait 200ms before writing cw on caid 1702

#I: :002000 # ignore provider 002000 on every channel

#I: 0 # ignore every caid that was not handled before

# These dvbapi settings works fine for CDS NL / BE, for other cards see oscam wiki on pli forum or oscam wiki on streamboard forum.

 

#I: 0100 #ignore all old seca providers

#I: 0500 #ignore viaccess

I: 0622 #ignore old irdeto

#M: 0604:000000 0604:000000 #map NL nagracaid 1817:00006A to seca 0100:00006A

#M: 1818:00006C 0100:00006C #map BE nagracaid 1818:00006C to seca 0100:00006C

P: 0604:000000 #Prio NL 0604

#P: 1818:00006C #Prio BE 1818

[theparasol]

Cardmhz moet beslist 600 zijn. Welke versie van oscam gebruik je eigenlijk?

[CB1]

zoals al eerder hierboven de 1.20 (nieuwste) maar op het moment dat ik dit schrijf ben ik al met 1.10 aan het stoeien maar doet hetzelfde.

Ik heb dit in de server config staan wat mhz betreft

 

mhz = 600

cardmhz = 600

Hij ziet de kaart ook ziet hij wat voor kanaal ik probeer te decoderen maar simpel geen beeld.

Als ik op CCcam schakel is er direct beeld.

Maar ik wil dit ook op oscam voor elkaar hebben.

Ik ga net zolang door eer ik beeld heb.

Ik heb bij mijn zoon en 2 dochters ook dm staan.

Die kijken weer naar beneden.

Als ik beneden Cccam draai dan ben ik wel in staat om bij hun oscam te draaien en beeld te krijgen.

Maar simpelweg leest hij de interne kaart niet.

Er is dus geen heel erge haast bij maar ik wil ook dit aan de praat hebben.

Ik probeer alles te snappen wat er in de config files staat maar dit gaat nog niet van harte.

Zoals ik er nu tegenaan kijk is de dvbapi een user die reader ziggo moet gaan gebruiken wat de interne reader is.

[CB1]

Voor zover je er wat aan hebt,

Dit komt er uit de versie 1.10rc

 

2011/12/05 23:52:21 2B0594B0 r active providers: 4 (070271,007800,007800,007800)

2011/12/05 23:52:21 2B0594B0 r found cardsystem irdeto

2011/12/05 23:52:21 2B0594B0 r entitlements for provider: 1, id: 070271

2011/12/05 23:52:21 2B0594B0 r chid: FFE0, date: 2005/09/21 - 2005/10/21

2011/12/05 23:52:21 2B0594B0 r chid: 01F4, date: 2005/09/15 - 2005/10/15

2011/12/05 23:52:21 2B0594B0 r chid: 01FE, date: 2005/09/22 - 2005/10/22

2011/12/05 23:52:21 2B0594B0 r chid: 0008, date: 2005/06/01 - 2005/07/01

2011/12/05 23:52:21 2B0594B0 r chid: 000B, date: 2005/09/21 - 2005/10/21

2011/12/05 23:52:21 2B0594B0 r chid: 0025, date: 2005/09/15 - 2005/10/15

2011/12/05 23:52:21 2B0594B0 r chid: 0027, date: 2005/09/15 - 2005/10/15

2011/12/05 23:52:21 2B0594B0 r chid: 0028, date: 2005/09/15 - 2005/10/15

2011/12/05 23:52:21 2B0594B0 r chid: 0384, date: 2005/09/21 - 2005/10/21

2011/12/05 23:52:22 2B0594B0 r chid: 0009, date: 2005/09/15 - 2005/10/15

2011/12/05 23:52:28 2B0594B0 r [irdeto-reader] ready for requests

2011/12/05 23:52:31 2AAC7480 s init for all local cards done

2011/12/05 23:52:31 2AAC7480 s anti cascading disabled

2011/12/05 23:52:31 2B1694B0 c plain dvbapi-client granted (dvbapiau, au=on (1 reader))

2011/12/05 23:52:31 2B1694B0 c dvbapi: 7 entries read from oscam.dvbapi

2011/12/05 23:52:34 2B1694B0 c dvbapi: [ADD PID 0] CAID: 0604 ECM_PID: 138C PROVID: 000000

2011/12/05 23:52:34 2B1694B0 c dvbapi: new program number: 2AFC (0604:2AFC unknown)

2011/12/05 23:52:34 2B1694B0 c dvbapi: Found 2 IRDETO ECM CHIDs

2011/12/05 23:52:34 2B0594B0 r Error processing ecm for caid 0604, srvid 2AFC (servicename: 0604:2AFC unknown) on reader ziggo.

2011/12/05 23:52:34 2B1694B0 c housekeeping lb stats thread started

2011/12/05 23:52:34 2B1694B0 c dvbapi: try pids again #1

2011/12/05 23:52:34 2B1694B0 c dvbapiau (0604&000000/2AFC/44:006C): not found (336 ms) by ziggo (of 1 avail 1) (ziggo irdeto_do_cmd [8] 9d 0

2011/12/05 23:52:35 2B1694B0 c dvbapi: trying irdeto chid index: 1

2011/12/05 23:52:35 2B1694B0 c dvbapiau (0604&000000/2AFC/44:006C): not found (0 ms) by ziggo (of 1 avail 1)

2011/12/05 23:52:35 2B0594B0 r Error processing ecm for caid 0604, srvid 2AFC (servicename: 0604:2AFC unknown) on reader ziggo.

2011/12/05 23:52:35 2B1694B0 c dvbapi: try pids again #2

2011/12/05 23:52:35 2B1694B0 c dvbapiau (0604&000000/2AFC/44:E480): not found (280 ms) by ziggo (of 1 avail 1) (ziggo irdeto_do_cmd [2] 90 0

2011/12/05 23:52:36 2B1694B0 c dvbapi: trying irdeto chid index: 1

2011/12/05 23:52:36 2B1694B0 c dvbapiau (0604&000000/2AFC/44:006C): not found (0 ms) by ziggo (of 1 avail 1)

2011/12/05 23:52:36 2B1694B0 c dvbapi: try pids again #3

2011/12/05 23:52:36 2B1694B0 c dvbapi: can't decode channel

2011/12/05 23:52:36 2B1694B0 c dvbapiau (0604&000000/2AFC/44:E480): not found (0 ms) by ziggo (of 1 avail 1)

[theparasol]

Ik twijfel heel erg aan je verhaal, want vanaf 1.20 rev 5800 moet de datum van entitlements Ziggo card correct zijn en dat strookt niet met jouw geposte loggings.

Zolang dat niet correct is kun je het wel schudden. Controleer aub zorgvuldig of je werkelijk met versie van oscam draait waarmee je denkt te draaien.

 

Post eens de log output van de cli:

 

killall oscam

 

oscam

 

(oscam kan ook ietsje anders heten, check het met ps -a)