Nieuwe tv vlaanderen kaart (3maand oud) werkt niet met oscam en smargo

emmel · 26 februari 2015

Hallo!

Zou het kunnen dat de nieuwe kaart van tv vlaanderen niet werkt met oscam en triple reader?

Ik krijg telkens not found op mijn kaart! als ik hem in een ontvanger steek werkt het wel.. Ik snap er niets van.

dit is mijn output van oscam :

2015/02/26 17:06:45 2664D90 c (dvbapi) Demuxer 0 added new ecmpid 0 CAID: 1818 ECM_PID: 0776 PROVID: 00006C
2015/02/26 17:06:45 2664D90 c (dvbapi) Demuxer 0 added new ecmpid 1 CAID: 1819 ECM_PID: 0794 PROVID: 00006D
2015/02/26 17:06:45 2664D90 c (dvbapi) Demuxer 0 added new ecmpid 2 CAID: 0100 ECM_PID: 0776 PROVID: 00006C
2015/02/26 17:06:45 2664D90 c (dvbapi) Demuxer 0 added new ecmpid 3 CAID: 0100 ECM_PID: 0794 PROVID: 00006D
2015/02/26 17:06:45 2664D90 c (dvbapi) Demuxer 0 added new ecmpid 4 CAID: 0500 ECM_PID: 0C26 PROVID: 051900
2015/02/26 17:06:45 2664D90 c (dvbapi) Demuxer 0 added new ecmpid 5 CAID: 0500 ECM_PID: 0CEE PROVID: 051900
2015/02/26 17:06:45 2664D90 c (dvbapi) Demuxer 0 added stream to ecmpid 2 CAID: 0100 ECM_PID: 0776 PROVID: 00006C
2015/02/26 17:06:45 2664D90 c (dvbapi) Demuxer 0 added stream to ecmpid 3 CAID: 0100 ECM_PID: 0794 PROVID: 00006D
2015/02/26 17:06:45 2664D90 c (dvbapi) Demuxer 0 added stream to ecmpid 4 CAID: 0500 ECM_PID: 0C26 PROVID: 051900
2015/02/26 17:06:45 2664D90 c (dvbapi) Demuxer 0 added stream to ecmpid 5 CAID: 0500 ECM_PID: 0CEE PROVID: 051900
2015/02/26 17:06:45 2664D90 c (dvbapi) Demuxer 0 found 6 ECMpids and 3 STREAMpids in PMT
2015/02/26 17:06:45 2664D90 c (dvbapi) Demuxer 0 receiver wants to demux srvid 320A on adapter 0000 camask 0001 index 0000 pmtpid 0000
2015/02/26 17:06:45 2664D90 c (dvbapi) Demuxer 0 new program number: 320A (1818:320A unknown) [pmt_list_management 3]
2015/02/26 17:06:45 2664D90 c (dvbapi) Demuxer 0 trying to descramble PID 2 CAID 0100 PROVID 00006C ECMPID 0776 ANY CHID PMTPID 0000 VPID 01FE
2015/02/26 17:06:45 2664D90 c (ecm) anonymous (0100&00006C/5C00/320A/64:B03A5117B51E1EE63A8B0C8DA683AFB9): not found (302 ms) by TVVlaanderen (fake 96 00 ecm)
2015/02/26 17:06:46 2664D90 c (dvbapi) Demuxer 0 restarting decodingrequests after 0 ms with 1 enabled and 5 disabled ecmpids!
2015/02/26 17:06:46 2664D90 c (dvbapi) Demuxer 0 trying to descramble PID 2 CAID 0100 PROVID 00006C ECMPID 0776 ANY CHID PMTPID 0000 VPID 01FE
2015/02/26 17:06:46 2664D90 c (ecm) anonymous (0100&00006C/5C00/320A/64:B03A5117B51E1EE63A8B0C8DA683AFB9): not found (1 ms) by TVVlaanderen
2015/02/26 17:06:46 2664D90 c (dvbapi) Demuxer 0 restarting decodingrequests after 0 ms with 1 enabled and 5 disabled ecmpids!
2015/02/26 17:06:46 2664D90 c (dvbapi) Demuxer 0 trying to descramble PID 2 CAID 0100 PROVID 00006C ECMPID 0776 ANY CHID PMTPID 0000 VPID 01FE
2015/02/26 17:06:47 2664D90 c (ecm) anonymous (0100&00006C/5C00/320A/64:886A95BAB9C968151E975F0AC7643E0B): not found (302 ms) by TVVlaanderen (fake 96 00 ecm)
2015/02/26 17:06:47 2664D90 c (dvbapi) Demuxer 0 restarting decodingrequests after 0 ms with 1 enabled and 5 disabled ecmpids!
2015/02/26 17:06:47 2664D90 c (dvbapi) Demuxer 0 trying to descramble PID 2 CAID 0100 PROVID 00006C ECMPID 0776 ANY CHID PMTPID 0000 VPID 01FE
2015/02/26 17:06:47 2664D90 c (ecm) anonymous (0100&00006C/5C00/320A/64:886A95BAB9C968151E975F0AC7643E0B): not found (1 ms) by TVVlaanderen
2015/02/26 17:06:48 2664D90 c (dvbapi) Demuxer 0 restarting decodingrequests after 0 ms with 1 enabled and 5 disabled ecmpids!
2015/02/26 17:06:48 2664D90 c (dvbapi) Demuxer 0 trying to descramble PID 2 CAID 0100 PROVID 00006C ECMPID 0776 ANY CHID PMTPID 0000 VPID 01FE
2015/02/26 17:06:48 2664D90 c (ecm) anonymous (0100&00006C/5C00/320A/64:886A95BAB9C968151E975F0AC7643E0B): not found (1 ms) by TVVlaanderen
2015/02/26 17:06:48 2664D90 c (dvbapi) Demuxer 0 restarting decodingrequests after 0 ms with 1 enabled and 5 disabled ecmpids!
2015/02/26 17:06:48 2664D90 c (dvbapi) Demuxer 0 trying to descramble PID 2 CAID 0100 PROVID 00006C ECMPID 0776 ANY CHID PMTPID 0000 VPID 01FE
2015/02/26 17:06:49 2664D90 c (ecm) anonymous (0100&00006C/5C00/320A/64:886A95BAB9C968151E975F0AC7643E0B): not found (1 ms) by TVVlaanderen
2015/02/26 17:06:49 2664D90 c (dvbapi) Demuxer 0 restarting decodingrequests after 0 ms with 1 enabled and 5 disabled ecmpids!
2015/02/26 17:06:49 2664D90 c (dvbapi) Demuxer 0 trying to descramble PID 2 CAID 0100 PROVID 00006C ECMPID 0776 ANY CHID PMTPID 0000 VPID 01FE
2015/02/26 17:06:49 2664D90 c (ecm) anonymous (0100&00006C/5C00/320A/64:886A95BAB9C968151E975F0AC7643E0B): not found (1 ms) by TVVlaanderen
2015/02/26 17:06:49 2664D90 c (dvbapi) Demuxer 0 restarting decodingrequests after 0 ms with 1 enabled and 5 disabled ecmpids!
2015/02/26 17:06:49 2664D90 c (dvbapi) Demuxer 0 trying to descramble PID 2 CAID 0100 PROVID 00006C ECMPID 0776 ANY CHID PMTPID 0000 VPID 01FE
2015/02/26 17:06:50 2664D90 c (ecm) anonymous (0100&00006C/5C00/320A/64:886A95BAB9C968151E975F0AC7643E0B): not found (1 ms) by TVVlaanderen
2015/02/26 17:06:50 2664D90 c (dvbapi) Demuxer 0 restarting decodingrequests after 0 ms with 1 enabled and 5 disabled ecmpids!
2015/02/26 17:06:50 2664D90 c (dvbapi) Demuxer 0 trying to descramble PID 2 CAID 0100 PROVID 00006C ECMPID 0776 ANY CHID PMTPID 0000 VPID 01FE
2015/02/26 17:06:50 2664D90 c (ecm) anonymous (0100&00006C/5C00/320A/64:886A95BAB9C968151E975F0AC7643E0B): not found (1 ms) by TVVlaanderen
2015/02/26 17:06:51 2664D90 c (dvbapi) Demuxer 0 restarting decodingrequests after 0 ms with 1 enabled and 5 disabled ecmpids!
2015/02/26 17:06:51 2664D90 c (dvbapi) Demuxer 0 trying to descramble PID 2 CAID 0100 PROVID 00006C ECMPID 0776 ANY CHID PMTPID 0000 VPID 01FE
2015/02/26 17:06:51 2664D90 c (ecm) anonymous (0100&00006C/5C00/320A/64:886A95BAB9C968151E975F0AC7643E0B): not found (1 ms) by TVVlaanderen
2015/02/26 17:06:51 2664D90 c (dvbapi) Demuxer 0 restarting decodingrequests after 0 ms with 1 enabled and 5 disabled ecmpids!
2015/02/26 17:06:51 2664D90 c (dvbapi) Demuxer 0 trying to descramble PID 2 CAID 0100 PROVID 00006C ECMPID 0776 ANY CHID PMTPID 0000 VPID 01FE
2015/02/26 17:06:52 2664D90 c (ecm) anonymous (0100&00006C/5C00/320A/64:886A95BAB9C968151E975F0AC7643E0B): not found (303 ms) by TVVlaanderen (fake 96 00 ecm)

wie kan mij helpen?

emmel · 26 februari 2015

hier mijn reader config:

[reader]
label                         = TVVlaanderen
protocol                      = mouse
device                        = /dev/ttyUSB0
caid                          = 0100
detect                        = cd
mhz                           = 480
cardmhz                       = 480
ident                         = 0100:00006C
group                         = 2
emmcache                      = 1,1,15
lb_weight                     = 1000
ratelimitecm                  = 4
ratelimitseconds              = 10
ecmunique                     = 1
srvidholdseconds              = 2

26 februari 2015

Daar ga je de mist is.. Protocol = Mouse moet zijn: Protocol = Smargo of SmartReader.. Mhz =600 en Cardmhz=600

emmel · 26 februari 2015

heb het net aangepast naar smargo, maar blijft hetzelfde... mijn kaart wordt nochtans herkend...

zie hier de output:

2015/02/26 18:51:54 26650D0 c (client) plain dvbapi-client granted (anonymous, au=off)
2015/02/26 18:51:54 26650D0 c (dvbapi) dvbapi channelcache loaded from /usr/local/etc/oscam.ccache
2015/02/26 18:51:54 26650D0 c (dvbapi) Using /tmp/camd.socket listen socket, API forced to DVBAPIv3 (0), userconfig boxtype: 11
2015/02/26 18:51:54 C0008C0 h (webif) webif: decompressed 159505 bytes back into 381344 bytes
2015/02/26 18:51:54 C0008C0 h (webif) HTTP Server running. ip=0.0.0.0 port=8888
2015/02/26 18:51:54 2664910 r (reader) TVVlaanderen [smargo] Buffers readed 0 bytes total time_us 75343
2015/02/26 18:51:54 2664910 r (reader) TVVlaanderen [smargo] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz= AUTO, cardmhz=600)
2015/02/26 18:51:55 2664910 r (reader) TVVlaanderen [smargo] card detected
2015/02/26 18:51:57 2664910 r (reader) TVVlaanderen [smargo] ATR: 3B F7 11 00 01 40 96 70 70 0A 0E 6C B6 D6
2015/02/26 18:51:57 2664910 r (reader) TVVlaanderen [smargo] Init card protocol T0, FI=1, F=372, D=1, N=1
2015/02/26 18:51:57 2664910 r (reader) TVVlaanderen [smargo] Calculated work ETU is 69.66 us reader mhz = 534
2015/02/26 18:51:57 2664910 r (reader) TVVlaanderen [smargo] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 5.34 MHz (specified in reader->mhz)
2015/02/26 18:51:58 2664910 r (reader) TVVlaanderen [smargo] detect seca/nagra tunneled card
2015/02/26 18:52:00 2664910 r (reader) TVVlaanderen [smargo] Nagra layer found
2015/02/26 18:52:00 2664910 r (reader) TVVlaanderen [smargo] Rom revision: DNASP400 RevI4A
2015/02/26 18:52:02 2664910 r (reader) TVVlaanderen [smargo] type: SECA, caid: 0100, serial: #########, card: Mediaguard v10.0
2015/02/26 18:52:02 2664910 r (reader) TVVlaanderen [smargo] Using PIN 0000!
2015/02/26 18:52:02 2664910 r (reader) TVVlaanderen [smargo] Can't disable parental lock. Wrong PIN? OSCam used 0000!
2015/02/26 18:52:02 2664910 r (reader) TVVlaanderen [smargo] found card system seca
2015/02/26 18:52:02 2664910 r (reader) TVVlaanderen [seca] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2015/02/26 18:52:02 2664910 r (reader) TVVlaanderen [seca] Request provider 1
2015/02/26 18:52:02 2664910 r (reader) TVVlaanderen [seca] provider 1: 0000, valid: 1, name: MANAGEMENT, expiry date: 2015/04/20
2015/02/26 18:52:02 2664910 r (reader) TVVlaanderen [seca] SA: ########
2015/02/26 18:52:02 2664910 r (reader) TVVlaanderen [seca] PBM for provider 1: 799008201c000
2015/02/26 18:52:02 2664910 r (reader) TVVlaanderen [seca] Request provider 2
2015/02/26 18:52:02 2664910 r (reader) TVVlaanderen [seca] provider 2: 006C, valid: 1, name: TV VLAANDEREN, expiry date: 2015/04/26
2015/02/26 18:52:02 2664910 r (reader) TVVlaanderen [seca] SA: ########
2015/02/26 18:52:03 2664910 r (reader) TVVlaanderen [seca] PBM for provider 2: 8200000000000000
2015/02/26 18:52:19 26650D0 c (dvbapi) Demuxer 0 added new ecmpid 0 CAID: 1818 ECM_PID: 0776 PROVID: 00006C
2015/02/26 18:52:19 26650D0 c (dvbapi) Demuxer 0 added new ecmpid 1 CAID: 1819 ECM_PID: 0794 PROVID: 00006D
2015/02/26 18:52:19 26650D0 c (dvbapi) Demuxer 0 added new ecmpid 2 CAID: 0100 ECM_PID: 0776 PROVID: 00006C
2015/02/26 18:52:19 26650D0 c (dvbapi) Demuxer 0 added new ecmpid 3 CAID: 0100 ECM_PID: 0794 PROVID: 00006D
2015/02/26 18:52:19 26650D0 c (dvbapi) Demuxer 0 added new ecmpid 4 CAID: 0500 ECM_PID: 0C26 PROVID: 051900
2015/02/26 18:52:19 26650D0 c (dvbapi) Demuxer 0 added new ecmpid 5 CAID: 0500 ECM_PID: 0CEE PROVID: 051900
2015/02/26 18:52:19 26650D0 c (dvbapi) Demuxer 0 added stream to ecmpid 2 CAID: 0100 ECM_PID: 0776 PROVID: 00006C
2015/02/26 18:52:19 26650D0 c (dvbapi) Demuxer 0 added stream to ecmpid 3 CAID: 0100 ECM_PID: 0794 PROVID: 00006D
2015/02/26 18:52:19 26650D0 c (dvbapi) Demuxer 0 added stream to ecmpid 4 CAID: 0500 ECM_PID: 0C26 PROVID: 051900
2015/02/26 18:52:19 26650D0 c (dvbapi) Demuxer 0 added stream to ecmpid 5 CAID: 0500 ECM_PID: 0CEE PROVID: 051900
2015/02/26 18:52:19 26650D0 c (dvbapi) Demuxer 0 found 6 ECMpids and 3 STREAMpids in PMT
2015/02/26 18:52:19 26650D0 c (dvbapi) Demuxer 0 receiver wants to demux srvid 320A on adapter 0000 camask 0001 index 0000 pmtpid 0000
2015/02/26 18:52:19 26650D0 c (dvbapi) Demuxer 0 new program number: 320A (1818:320A unknown) [pmt_list_management 3]
2015/02/26 18:52:19 26650D0 c (dvbapi) Demuxer 0 trying to descramble PID 2 CAID 0100 PROVID 00006C ECMPID 0776 ANY CHID PMTPID 0000 VPID 01FE
2015/02/26 18:52:20 26650D0 c (ecm) anonymous (0100&00006C/5C00/320A/64:619646707DBA15A5496BC813B1404699): not found (265 ms) by TVVlaanderen (fake 96 00 ecm)
2015/02/26 18:52:20 26650D0 c (dvbapi) Demuxer 0 restarting decodingrequests after 0 ms with 1 enabled and 5 disabled ecmpids!
2015/02/26 18:52:20 26650D0 c (dvbapi) Demuxer 0 trying to descramble PID 2 CAID 0100 PROVID 00006C ECMPID 0776 ANY CHID PMTPID 0000 VPID 01FE
2015/02/26 18:52:20 26650D0 c (ecm) anonymous (0100&00006C/5C00/320A/64:619646707DBA15A5496BC813B1404699): not found (1 ms) by TVVlaanderen
2015/02/26 18:52:20 26650D0 c (dvbapi) Demuxer 0 restarting decodingrequests after 0 ms with 1 enabled and 5 disabled ecmpids!
2015/02/26 18:52:20 26650D0 c (dvbapi) Demuxer 0 trying to descramble PID 2 CAID 0100 PROVID 00006C ECMPID 0776 ANY CHID PMTPID 0000 VPID 01FE
2015/02/26 18:52:21 26650D0 c (ecm) anonymous (0100&00006C/5C00/320A/64:619646707DBA15A5496BC813B1404699): not found (1 ms) by TVVlaanderen
2015/02/26 18:52:21 26650D0 c (dvbapi) Demuxer 0 restarting decodingrequests after 0 ms with 1 enabled and 5 disabled ecmpids!
2015/02/26 18:52:21 26650D0 c (dvbapi) Demuxer 0 trying to descramble PID 2 CAID 0100 PROVID 00006C ECMPID 0776 ANY CHID PMTPID 0000 VPID 01FE
2015/02/26 18:52:21 26650D0 c (ecm) anonymous (0100&00006C/5C00/320A/64:619646707DBA15A5496BC813B1404699): not found (1 ms) by TVVlaanderen

26 februari 2015

Pin code '0000'? PIN controle aangezet in OSCam config?

sattv4iedereen · 26 februari 2015

Mijn kennis is miniem, maar ik zie volgend:

2015/02/26 18:51:54 26650D0 c (client) plain dvbapi-client granted (anonymous, au=off)

Wil dit laatste niet zeggen, dat de kaart geen update's krijgt, en dus misschien verouderde gegevens heeft?

emmel · 26 februari 2015

pin code heb ik nu uitgezet.. die foutmelding is weg nu, maar nog steeds hetzelfde..

@sattvvooriedereen moet ik iets met die au doen dan?

26 februari 2015

Er zit een fout in je OSCam config. Misschien handig om je config hier compleet te posten. Dvbapi lijkt niet goed te zijn. Boxtype =11? Wat voor box bezit je...

emmel · 26 februari 2015

hi, ik gebruik linux met mumudvb om te streamen

dit zijn mijn configs:

[global]
logfile                       = /var/log/oscam/oscam.log
logduplicatelines             = 1
disableuserfile               = 0
nice                          = -1
maxlogsize                    = 200
waitforcards                  = 0
dropdups                      = 1
usrfile                       = /var/log/oscam/oscamuser.log
cwlogdir                      = /var/log/oscam/cw.log
emmlogdir                     = /var/log/oscam/emm.log
lb_save                       = 300
lb_nbest_readers              = 2
lb_stat_cleanup               = 100
failbantime                   = 5
failbancount                  = 10

[cccam]
port                          = 12000
nodeid                        = 507229D210631464
version                       = 2.3.0
reshare                       = 1
ignorereshare                 = 1
stealth                       = 1
keepconnected                 = 0

[dvbapi]
enabled                       = 1
au                            = 1
request_mode                  = 1
user                          = mumudvb
boxtype                       = pc

[webif]
httpport                      = 8888
httpuser                      = root
httppwd                       = root
httpallowed                   = 0.0.0.0-255.255.255.255

[account]
user                          = mumudvb
caid                          = 0100
au                            = 1
group                         = 1

[reader]
label                         = TVVlaanderen
protocol                      = smargo
device                        = /dev/ttyUSB0
caid                          = 0100
detect                        = cd
mhz                           = 600
cardmhz                       = 600
ident                         = 0100:00006C
group                         = 1
emmcache                      = 1,1,15,0
lb_weight                     = 1000
ratelimitecm                  = 4
ratelimittime                 = 0
ecmunique                     = 1
srvidholdtime                 = 0

26 februari 2015

Ratelimittime is fout, srvidholdtime is fout... Alle Loadbalance items eruit halen....

emmel · 26 februari 2015

ok alles van loadbalance er uit.. nog steeds hetzelfde, moet er iets bij oscam.dvbapi staan, of mag dit leeg blijven?

26 februari 2015

Mag leeg blijven...

27 februari 2015

als je er PLi op heb zou die het gewoon moeten doen anders laat iemand wie pli heeft ff deze uploaden. ben momenteel aan het werk.

ps heb hem toch nog gevonden.

[reader]
label = lower_card
enable = 1
protocol = internal
device = /dev/sci0
detect = cd
group = 1
emmcache = 1,3,15
audisabled = 0
mhz = 357
cardmhz = 2700
ratelimitecm = 4
ratelimittime = 9000
srvidholdtime = 2000
ecmunique = 1

[reader]
label = upper_card
enable = 1
protocol = internal
device = /dev/sci1
detect = cd
group = 1
emmcache = 1,3,15
audisabled = 0
mhz = 357
cardmhz = 2700
ratelimitecm = 4
ratelimittime = 9000
srvidholdtime = 2000
ecmunique = 1

27 februari 2015 aangepast door Cobus R

27 februari 2015

Post even je hele OSCam config.. Denk dat er iets niet communiceert... Of download mijn configuratie en pas deze aan op de jouwe..

emmel · 5 oktober 2015

het probleem was dus een defecte triple reader..

Inloggen

Nieuwe tv vlaanderen kaart (3maand oud) werkt niet met oscam en smargo

Aanbevolen berichten

emmel

emmel

Gast Mimisiku

emmel

Gast Mimisiku

sattv4iedereen

emmel

Gast Mimisiku

emmel

Gast Mimisiku

emmel

Gast Mimisiku

Gast Cobus R

Gast Mimisiku

emmel

Maak een account aan of log in om te reageren

Account aanmaken

Inloggen

Wie is er online 0 leden

Gerelateerde inhoud

OScam binaries 1 2

Nieuwe SRG kaart, van versie 5.0 naar 7.0 - Oscam werkt niet meer 1 2

OScam builds Mimisiku 1 2

oscam.user CHID = 0100:001b90,001b91,001b95,0017d7,0051da,005276,005278,00527c,005280,005282,005286,005287,0052da,005221,005226 werkt niet

TiVuSAT ervaring 1 2 3 4 10

Synology NAS 1 2

OSCAM - TVHeadend en KabelNoord

Overig

Activiteit