Ga naar inhoud

Nieuwe tv vlaanderen kaart (3maand oud) werkt niet met oscam en smargo

emmel

Door emmel
in CI, CI+, (soft)cams en smartcards

 Delen
Ga naar oplossing Opgelost door emmel,

Aanbevolen berichten

emmel Vaker hier

emmel

Geplaatst:
Geplaatst:

Hallo!

 

Zou het kunnen dat de nieuwe kaart van tv vlaanderen niet werkt met oscam en triple reader?

Ik krijg telkens not found op mijn kaart! als ik hem in een ontvanger steek werkt het wel.. Ik snap er niets van.

dit is mijn output van oscam :

 

  • 2015/02/26 17:06:45 2664D90 c (dvbapi) Demuxer 0 added new ecmpid 0 CAID: 1818 ECM_PID: 0776 PROVID: 00006C
  • 2015/02/26 17:06:45 2664D90 c (dvbapi) Demuxer 0 added new ecmpid 1 CAID: 1819 ECM_PID: 0794 PROVID: 00006D
  • 2015/02/26 17:06:45 2664D90 c (dvbapi) Demuxer 0 added new ecmpid 2 CAID: 0100 ECM_PID: 0776 PROVID: 00006C
  • 2015/02/26 17:06:45 2664D90 c (dvbapi) Demuxer 0 added new ecmpid 3 CAID: 0100 ECM_PID: 0794 PROVID: 00006D
  • 2015/02/26 17:06:45 2664D90 c (dvbapi) Demuxer 0 added new ecmpid 4 CAID: 0500 ECM_PID: 0C26 PROVID: 051900
  • 2015/02/26 17:06:45 2664D90 c (dvbapi) Demuxer 0 added new ecmpid 5 CAID: 0500 ECM_PID: 0CEE PROVID: 051900
  • 2015/02/26 17:06:45 2664D90 c (dvbapi) Demuxer 0 added stream to ecmpid 2 CAID: 0100 ECM_PID: 0776 PROVID: 00006C
  • 2015/02/26 17:06:45 2664D90 c (dvbapi) Demuxer 0 added stream to ecmpid 3 CAID: 0100 ECM_PID: 0794 PROVID: 00006D
  • 2015/02/26 17:06:45 2664D90 c (dvbapi) Demuxer 0 added stream to ecmpid 4 CAID: 0500 ECM_PID: 0C26 PROVID: 051900
  • 2015/02/26 17:06:45 2664D90 c (dvbapi) Demuxer 0 added stream to ecmpid 5 CAID: 0500 ECM_PID: 0CEE PROVID: 051900
  • 2015/02/26 17:06:45 2664D90 c (dvbapi) Demuxer 0 found 6 ECMpids and 3 STREAMpids in PMT
  • 2015/02/26 17:06:45 2664D90 c (dvbapi) Demuxer 0 receiver wants to demux srvid 320A on adapter 0000 camask 0001 index 0000 pmtpid 0000
  • 2015/02/26 17:06:45 2664D90 c (dvbapi) Demuxer 0 new program number: 320A (1818:320A unknown) [pmt_list_management 3]
  • 2015/02/26 17:06:45 2664D90 c (dvbapi) Demuxer 0 trying to descramble PID 2 CAID 0100 PROVID 00006C ECMPID 0776 ANY CHID PMTPID 0000 VPID 01FE
  • 2015/02/26 17:06:45 2664D90 c (ecm) anonymous (0100&00006C/5C00/320A/64:B03A5117B51E1EE63A8B0C8DA683AFB9): not found (302 ms) by TVVlaanderen (fake 96 00 ecm)
  • 2015/02/26 17:06:46 2664D90 c (dvbapi) Demuxer 0 restarting decodingrequests after 0 ms with 1 enabled and 5 disabled ecmpids!
  • 2015/02/26 17:06:46 2664D90 c (dvbapi) Demuxer 0 trying to descramble PID 2 CAID 0100 PROVID 00006C ECMPID 0776 ANY CHID PMTPID 0000 VPID 01FE
  • 2015/02/26 17:06:46 2664D90 c (ecm) anonymous (0100&00006C/5C00/320A/64:B03A5117B51E1EE63A8B0C8DA683AFB9): not found (1 ms) by TVVlaanderen
  • 2015/02/26 17:06:46 2664D90 c (dvbapi) Demuxer 0 restarting decodingrequests after 0 ms with 1 enabled and 5 disabled ecmpids!
  • 2015/02/26 17:06:46 2664D90 c (dvbapi) Demuxer 0 trying to descramble PID 2 CAID 0100 PROVID 00006C ECMPID 0776 ANY CHID PMTPID 0000 VPID 01FE
  • 2015/02/26 17:06:47 2664D90 c (ecm) anonymous (0100&00006C/5C00/320A/64:886A95BAB9C968151E975F0AC7643E0B): not found (302 ms) by TVVlaanderen (fake 96 00 ecm)
  • 2015/02/26 17:06:47 2664D90 c (dvbapi) Demuxer 0 restarting decodingrequests after 0 ms with 1 enabled and 5 disabled ecmpids!
  • 2015/02/26 17:06:47 2664D90 c (dvbapi) Demuxer 0 trying to descramble PID 2 CAID 0100 PROVID 00006C ECMPID 0776 ANY CHID PMTPID 0000 VPID 01FE
  • 2015/02/26 17:06:47 2664D90 c (ecm) anonymous (0100&00006C/5C00/320A/64:886A95BAB9C968151E975F0AC7643E0B): not found (1 ms) by TVVlaanderen
  • 2015/02/26 17:06:48 2664D90 c (dvbapi) Demuxer 0 restarting decodingrequests after 0 ms with 1 enabled and 5 disabled ecmpids!
  • 2015/02/26 17:06:48 2664D90 c (dvbapi) Demuxer 0 trying to descramble PID 2 CAID 0100 PROVID 00006C ECMPID 0776 ANY CHID PMTPID 0000 VPID 01FE
  • 2015/02/26 17:06:48 2664D90 c (ecm) anonymous (0100&00006C/5C00/320A/64:886A95BAB9C968151E975F0AC7643E0B): not found (1 ms) by TVVlaanderen
  • 2015/02/26 17:06:48 2664D90 c (dvbapi) Demuxer 0 restarting decodingrequests after 0 ms with 1 enabled and 5 disabled ecmpids!
  • 2015/02/26 17:06:48 2664D90 c (dvbapi) Demuxer 0 trying to descramble PID 2 CAID 0100 PROVID 00006C ECMPID 0776 ANY CHID PMTPID 0000 VPID 01FE
  • 2015/02/26 17:06:49 2664D90 c (ecm) anonymous (0100&00006C/5C00/320A/64:886A95BAB9C968151E975F0AC7643E0B): not found (1 ms) by TVVlaanderen
  • 2015/02/26 17:06:49 2664D90 c (dvbapi) Demuxer 0 restarting decodingrequests after 0 ms with 1 enabled and 5 disabled ecmpids!
  • 2015/02/26 17:06:49 2664D90 c (dvbapi) Demuxer 0 trying to descramble PID 2 CAID 0100 PROVID 00006C ECMPID 0776 ANY CHID PMTPID 0000 VPID 01FE
  • 2015/02/26 17:06:49 2664D90 c (ecm) anonymous (0100&00006C/5C00/320A/64:886A95BAB9C968151E975F0AC7643E0B): not found (1 ms) by TVVlaanderen
  • 2015/02/26 17:06:49 2664D90 c (dvbapi) Demuxer 0 restarting decodingrequests after 0 ms with 1 enabled and 5 disabled ecmpids!
  • 2015/02/26 17:06:49 2664D90 c (dvbapi) Demuxer 0 trying to descramble PID 2 CAID 0100 PROVID 00006C ECMPID 0776 ANY CHID PMTPID 0000 VPID 01FE
  • 2015/02/26 17:06:50 2664D90 c (ecm) anonymous (0100&00006C/5C00/320A/64:886A95BAB9C968151E975F0AC7643E0B): not found (1 ms) by TVVlaanderen
  • 2015/02/26 17:06:50 2664D90 c (dvbapi) Demuxer 0 restarting decodingrequests after 0 ms with 1 enabled and 5 disabled ecmpids!
  • 2015/02/26 17:06:50 2664D90 c (dvbapi) Demuxer 0 trying to descramble PID 2 CAID 0100 PROVID 00006C ECMPID 0776 ANY CHID PMTPID 0000 VPID 01FE
  • 2015/02/26 17:06:50 2664D90 c (ecm) anonymous (0100&00006C/5C00/320A/64:886A95BAB9C968151E975F0AC7643E0B): not found (1 ms) by TVVlaanderen
  • 2015/02/26 17:06:51 2664D90 c (dvbapi) Demuxer 0 restarting decodingrequests after 0 ms with 1 enabled and 5 disabled ecmpids!
  • 2015/02/26 17:06:51 2664D90 c (dvbapi) Demuxer 0 trying to descramble PID 2 CAID 0100 PROVID 00006C ECMPID 0776 ANY CHID PMTPID 0000 VPID 01FE
  • 2015/02/26 17:06:51 2664D90 c (ecm) anonymous (0100&00006C/5C00/320A/64:886A95BAB9C968151E975F0AC7643E0B): not found (1 ms) by TVVlaanderen
  • 2015/02/26 17:06:51 2664D90 c (dvbapi) Demuxer 0 restarting decodingrequests after 0 ms with 1 enabled and 5 disabled ecmpids!
  • 2015/02/26 17:06:51 2664D90 c (dvbapi) Demuxer 0 trying to descramble PID 2 CAID 0100 PROVID 00006C ECMPID 0776 ANY CHID PMTPID 0000 VPID 01FE
  • 2015/02/26 17:06:52 2664D90 c (ecm) anonymous (0100&00006C/5C00/320A/64:886A95BAB9C968151E975F0AC7643E0B): not found (303 ms) by TVVlaanderen (fake 96 00 ecm)

 

wie kan mij helpen?

 

emmel Vaker hier

emmel

Geplaatst:
  • Auteur
Geplaatst:

hier mijn reader config:

[reader]
label                         = TVVlaanderen
protocol                      = mouse
device                        = /dev/ttyUSB0
caid                          = 0100
detect                        = cd
mhz                           = 480
cardmhz                       = 480
ident                         = 0100:00006C
group                         = 2
emmcache                      = 1,1,15
lb_weight                     = 1000
ratelimitecm                  = 4
ratelimitseconds              = 10
ecmunique                     = 1
srvidholdseconds              = 2

Gast Mimisiku

Gast Mimisiku

Geplaatst:
Geplaatst:

Daar ga je de mist is.. Protocol = Mouse moet zijn: Protocol = Smargo of SmartReader.. Mhz =600 en Cardmhz=600

emmel Vaker hier

emmel

Geplaatst:
  • Auteur
Geplaatst:

heb het net aangepast naar smargo, maar blijft hetzelfde... mijn kaart wordt nochtans herkend...

zie hier de output:

 

  • 2015/02/26 18:51:54 26650D0 c (client) plain dvbapi-client granted (anonymous, au=off)
  • 2015/02/26 18:51:54 26650D0 c (dvbapi) dvbapi channelcache loaded from /usr/local/etc/oscam.ccache
  • 2015/02/26 18:51:54 26650D0 c (dvbapi) Using /tmp/camd.socket listen socket, API forced to DVBAPIv3 (0), userconfig boxtype: 11
  • 2015/02/26 18:51:54 C0008C0 h (webif) webif: decompressed 159505 bytes back into 381344 bytes
  • 2015/02/26 18:51:54 C0008C0 h (webif) HTTP Server running. ip=0.0.0.0 port=8888
  • 2015/02/26 18:51:54 2664910 r (reader) TVVlaanderen [smargo] Buffers readed 0 bytes total time_us 75343
  • 2015/02/26 18:51:54 2664910 r (reader) TVVlaanderen [smargo] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz= AUTO, cardmhz=600)
  • 2015/02/26 18:51:55 2664910 r (reader) TVVlaanderen [smargo] card detected
  • 2015/02/26 18:51:57 2664910 r (reader) TVVlaanderen [smargo] ATR: 3B F7 11 00 01 40 96 70 70 0A 0E 6C B6 D6
  • 2015/02/26 18:51:57 2664910 r (reader) TVVlaanderen [smargo] Init card protocol T0, FI=1, F=372, D=1, N=1
  • 2015/02/26 18:51:57 2664910 r (reader) TVVlaanderen [smargo] Calculated work ETU is 69.66 us reader mhz = 534
  • 2015/02/26 18:51:57 2664910 r (reader) TVVlaanderen [smargo] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 5.34 MHz (specified in reader->mhz)
  • 2015/02/26 18:51:58 2664910 r (reader) TVVlaanderen [smargo] detect seca/nagra tunneled card
  • 2015/02/26 18:52:00 2664910 r (reader) TVVlaanderen [smargo] Nagra layer found
  • 2015/02/26 18:52:00 2664910 r (reader) TVVlaanderen [smargo] Rom revision: DNASP400 RevI4A
  • 2015/02/26 18:52:02 2664910 r (reader) TVVlaanderen [smargo] type: SECA, caid: 0100, serial: #########, card: Mediaguard v10.0
  • 2015/02/26 18:52:02 2664910 r (reader) TVVlaanderen [smargo] Using PIN 0000!
  • 2015/02/26 18:52:02 2664910 r (reader) TVVlaanderen [smargo] Can't disable parental lock. Wrong PIN? OSCam used 0000!
  • 2015/02/26 18:52:02 2664910 r (reader) TVVlaanderen [smargo] found card system seca
  • 2015/02/26 18:52:02 2664910 r (reader) TVVlaanderen [seca] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
  • 2015/02/26 18:52:02 2664910 r (reader) TVVlaanderen [seca] Request provider 1
  • 2015/02/26 18:52:02 2664910 r (reader) TVVlaanderen [seca] provider 1: 0000, valid: 1, name: MANAGEMENT, expiry date: 2015/04/20
  • 2015/02/26 18:52:02 2664910 r (reader) TVVlaanderen [seca] SA: ########
  • 2015/02/26 18:52:02 2664910 r (reader) TVVlaanderen [seca] PBM for provider 1: 799008201c000
  • 2015/02/26 18:52:02 2664910 r (reader) TVVlaanderen [seca] Request provider 2
  • 2015/02/26 18:52:02 2664910 r (reader) TVVlaanderen [seca] provider 2: 006C, valid: 1, name: TV VLAANDEREN, expiry date: 2015/04/26
  • 2015/02/26 18:52:02 2664910 r (reader) TVVlaanderen [seca] SA: ########
  • 2015/02/26 18:52:03 2664910 r (reader) TVVlaanderen [seca] PBM for provider 2: 8200000000000000
  • 2015/02/26 18:52:19 26650D0 c (dvbapi) Demuxer 0 added new ecmpid 0 CAID: 1818 ECM_PID: 0776 PROVID: 00006C
  • 2015/02/26 18:52:19 26650D0 c (dvbapi) Demuxer 0 added new ecmpid 1 CAID: 1819 ECM_PID: 0794 PROVID: 00006D
  • 2015/02/26 18:52:19 26650D0 c (dvbapi) Demuxer 0 added new ecmpid 2 CAID: 0100 ECM_PID: 0776 PROVID: 00006C
  • 2015/02/26 18:52:19 26650D0 c (dvbapi) Demuxer 0 added new ecmpid 3 CAID: 0100 ECM_PID: 0794 PROVID: 00006D
  • 2015/02/26 18:52:19 26650D0 c (dvbapi) Demuxer 0 added new ecmpid 4 CAID: 0500 ECM_PID: 0C26 PROVID: 051900
  • 2015/02/26 18:52:19 26650D0 c (dvbapi) Demuxer 0 added new ecmpid 5 CAID: 0500 ECM_PID: 0CEE PROVID: 051900
  • 2015/02/26 18:52:19 26650D0 c (dvbapi) Demuxer 0 added stream to ecmpid 2 CAID: 0100 ECM_PID: 0776 PROVID: 00006C
  • 2015/02/26 18:52:19 26650D0 c (dvbapi) Demuxer 0 added stream to ecmpid 3 CAID: 0100 ECM_PID: 0794 PROVID: 00006D
  • 2015/02/26 18:52:19 26650D0 c (dvbapi) Demuxer 0 added stream to ecmpid 4 CAID: 0500 ECM_PID: 0C26 PROVID: 051900
  • 2015/02/26 18:52:19 26650D0 c (dvbapi) Demuxer 0 added stream to ecmpid 5 CAID: 0500 ECM_PID: 0CEE PROVID: 051900
  • 2015/02/26 18:52:19 26650D0 c (dvbapi) Demuxer 0 found 6 ECMpids and 3 STREAMpids in PMT
  • 2015/02/26 18:52:19 26650D0 c (dvbapi) Demuxer 0 receiver wants to demux srvid 320A on adapter 0000 camask 0001 index 0000 pmtpid 0000
  • 2015/02/26 18:52:19 26650D0 c (dvbapi) Demuxer 0 new program number: 320A (1818:320A unknown) [pmt_list_management 3]
  • 2015/02/26 18:52:19 26650D0 c (dvbapi) Demuxer 0 trying to descramble PID 2 CAID 0100 PROVID 00006C ECMPID 0776 ANY CHID PMTPID 0000 VPID 01FE
  • 2015/02/26 18:52:20 26650D0 c (ecm) anonymous (0100&00006C/5C00/320A/64:619646707DBA15A5496BC813B1404699): not found (265 ms) by TVVlaanderen (fake 96 00 ecm)
  • 2015/02/26 18:52:20 26650D0 c (dvbapi) Demuxer 0 restarting decodingrequests after 0 ms with 1 enabled and 5 disabled ecmpids!
  • 2015/02/26 18:52:20 26650D0 c (dvbapi) Demuxer 0 trying to descramble PID 2 CAID 0100 PROVID 00006C ECMPID 0776 ANY CHID PMTPID 0000 VPID 01FE
  • 2015/02/26 18:52:20 26650D0 c (ecm) anonymous (0100&00006C/5C00/320A/64:619646707DBA15A5496BC813B1404699): not found (1 ms) by TVVlaanderen
  • 2015/02/26 18:52:20 26650D0 c (dvbapi) Demuxer 0 restarting decodingrequests after 0 ms with 1 enabled and 5 disabled ecmpids!
  • 2015/02/26 18:52:20 26650D0 c (dvbapi) Demuxer 0 trying to descramble PID 2 CAID 0100 PROVID 00006C ECMPID 0776 ANY CHID PMTPID 0000 VPID 01FE
  • 2015/02/26 18:52:21 26650D0 c (ecm) anonymous (0100&00006C/5C00/320A/64:619646707DBA15A5496BC813B1404699): not found (1 ms) by TVVlaanderen
  • 2015/02/26 18:52:21 26650D0 c (dvbapi) Demuxer 0 restarting decodingrequests after 0 ms with 1 enabled and 5 disabled ecmpids!
  • 2015/02/26 18:52:21 26650D0 c (dvbapi) Demuxer 0 trying to descramble PID 2 CAID 0100 PROVID 00006C ECMPID 0776 ANY CHID PMTPID 0000 VPID 01FE
  • 2015/02/26 18:52:21 26650D0 c (ecm) anonymous (0100&00006C/5C00/320A/64:619646707DBA15A5496BC813B1404699): not found (1 ms) by TVVlaanderen
Gast Mimisiku

Gast Mimisiku

Geplaatst:
Geplaatst:

Pin code '0000'? PIN controle aangezet in OSCam config?

sattv4iedereen Superster

sattv4iedereen

Geplaatst:
Geplaatst:

Mijn kennis is miniem, maar ik zie volgend:

 

  • 2015/02/26 18:51:54 26650D0 c (client) plain dvbapi-client granted (anonymous, au=off)

Wil dit laatste niet zeggen, dat de kaart geen update's krijgt, en dus misschien verouderde gegevens heeft?

Ontvangst van de astra 3 satelliet met een selfsat h50D via de vu zero 4K.cd multiroom  pakket met mz 102 en een vu uno 4k dvb-c fbc tuner met ci+ tv met een kaartje( telenet ). Gigablue bijgekomen voor sat en kabel.Informatie die ik geef, gaat over de Belgische situatie, tenzij anders vermeld|

Gast Mimisiku

Gast Mimisiku

Geplaatst:
Geplaatst:

Er zit een fout in je OSCam config. Misschien handig om je config hier compleet te posten. Dvbapi lijkt niet goed te zijn. Boxtype =11? Wat voor box bezit je...

emmel Vaker hier

emmel

Geplaatst:
  • Auteur
Geplaatst:

hi, ik gebruik linux met mumudvb om te streamen

dit zijn mijn configs:

 

[global]
logfile                       = /var/log/oscam/oscam.log
logduplicatelines             = 1
disableuserfile               = 0
nice                          = -1
maxlogsize                    = 200
waitforcards                  = 0
dropdups                      = 1
usrfile                       = /var/log/oscam/oscamuser.log
cwlogdir                      = /var/log/oscam/cw.log
emmlogdir                     = /var/log/oscam/emm.log
lb_save                       = 300
lb_nbest_readers              = 2
lb_stat_cleanup               = 100
failbantime                   = 5
failbancount                  = 10


[cccam]
port                          = 12000
nodeid                        = 507229D210631464
version                       = 2.3.0
reshare                       = 1
ignorereshare                 = 1
stealth                       = 1
keepconnected                 = 0

[dvbapi]
enabled                       = 1
au                            = 1
request_mode                  = 1
user                          = mumudvb
boxtype                       = pc

[webif]
httpport                      = 8888
httpuser                      = root
httppwd                       = root
httpallowed                   = 0.0.0.0-255.255.255.255

 

[account]
user                          = mumudvb
caid                          = 0100
au                            = 1
group                         = 1

 

[reader]
label                         = TVVlaanderen
protocol                      = smargo
device                        = /dev/ttyUSB0
caid                          = 0100
detect                        = cd
mhz                           = 600
cardmhz                       = 600
ident                         = 0100:00006C
group                         = 1
emmcache                      = 1,1,15,0
lb_weight                     = 1000
ratelimitecm                  = 4
ratelimittime                 = 0
ecmunique                     = 1
srvidholdtime                 = 0
 

Gast Mimisiku

Gast Mimisiku

Geplaatst:
Geplaatst:

Ratelimittime is fout, srvidholdtime is fout... Alle Loadbalance items eruit halen....

Gast Cobus R

Gast Cobus R

Geplaatst:
Geplaatst: (aangepast)

als je er PLi op heb zou die het gewoon moeten doen anders laat iemand wie pli heeft ff deze uploaden. ben momenteel aan het werk.

 

ps heb hem toch nog gevonden.

 

 

[reader]
label                         = lower_card
enable                        = 1
protocol                      = internal
device                        = /dev/sci0
detect                        = cd
group                         = 1
emmcache                      = 1,3,15
audisabled                    = 0
mhz                           = 357
cardmhz                       = 2700
ratelimitecm                  = 4
ratelimittime                 = 9000
srvidholdtime                 = 2000
ecmunique                     = 1


[reader]
label                         = upper_card
enable                        = 1
protocol                      = internal
device                        = /dev/sci1
detect                        = cd
group                         = 1
emmcache                      = 1,3,15
audisabled                    = 0
mhz                           = 357
cardmhz                       = 2700
ratelimitecm                  = 4
ratelimittime                 = 9000
srvidholdtime                 = 2000
ecmunique                     = 1

aangepast door Cobus R
Gast Mimisiku

Gast Mimisiku

Geplaatst:
Geplaatst:

Post even je hele OSCam config.. Denk dat er iets niet communiceert... Of download mijn configuratie en pas deze aan op de jouwe..

  • 7 maanden later...

Maak een account aan of log in om te reageren

Je moet een lid zijn om een reactie te kunnen achterlaten

Account aanmaken

Registreer voor een nieuwe account in onze community. Het is erg gemakkelijk!

Registreer een nieuwe account

Inloggen

Heb je reeds een account? Log hier in.

Nu inloggen
 Delen
Ga naar onderwerp-overzicht

  • Wie is er online   0 leden

    • Er zijn geen geregistreerde gebruikers deze pagina aan het bekijken
×
×
  • Nieuwe aanmaken...