Ga naar inhoud


NSLU2 en OsCam


Aanbevolen berichten

gelukt zo te zien met deze handleiding en de handleiding te vinden op de site:

 

DM800 dreambox installation with PLI Iolite/Jade
1: Enter the download menu
2: Search for USBtoSerial drivers
3: Download
4: Reboot
5: Plug in the smartreader
6: Insert your card. Make sure the chip on the card faces the same direction as the lights on the reader.
7: Done

 

http://www.maxdigital.nl/?action=pagina&id=2&id2=3&id3=7

 

thnx voor de feedback

 

ps mijn versie was 7.6?????

VU+ DUO | ET9000 | Qnap TS-459pro+ | Qnap TS-239pro | HDI Dune prime 3.0 | WRT320N | AXIS 210 | AXIS 1031w |

Link naar reactie
Delen op andere sites


  • Reacties 39
  • Aangemaakt
  • Laatste reactie

Beste reacties in dit topic

Beste reacties in dit topic

Dat draait,

 

Ik las wel dat smargo 1.4 niet werkt onder CCcam 2.1.4. weten jullie hier iets vanaf?

 

Nu enkel nog de configuratie in orde maken,

 

de server instellingen zien er als volgt uit maar weet niet of dit correct is.

 

[reader]
label						 = smargo-Seca
description				   = Smargo Carte Seca
protocol					  = smartreader
device					    = Serial:Reader 156
detect					    = cd
mhz						   = 480
cardmhz					   = 357
group						 = 2
caid						  = 0100
emmcache					  = 1,3,2
#ecmcache					  = 1
~

VU+ DUO | ET9000 | Qnap TS-459pro+ | Qnap TS-239pro | HDI Dune prime 3.0 | WRT320N | AXIS 210 | AXIS 1031w |

Link naar reactie
Delen op andere sites

[reader]

 

label = canaldigitaal

 

enable = 1

 

protocol = mouse

 

device = /dev/ttyUSB0

 

caid = 0100

 

detect = cd

 

mhz = 357

 

cardmhz = 357

 

group = 1

 

emmcache = 1,3,2

 

 

 

Oscam cofig

 

 

# for more info about configuration possibilities look at the docs in

 

# /usr/oscam/doc

 

#

 

# pls. leave settings of this section as they are unless you know what you are doing

 

[global]

 

nice = -1

 

clienttimeout = 6

 

fallbacktimeout = 5

 

clientmaxIdle = 120

 

bindwait = 120

 

resolvedelay = 30

 

logfile = /tmp/oscam.log

 

usrfile = /tmp/oscam-user.log

 

pidfile = /tmp/run/oscam.pid

 

maxlogsize = 512

 

waitforcards = 1

 

saveinithistory = 1

 

# settings for monitorsoftware (micromon), disabled by default because using webif

 

# hideclinet_to and appendchaninfo are also used for webif, enabled

 

[monitor]

 

#Port = 1176

 

#aulow = 120

 

#monlevel = 4

 

hideclient_to = 15

 

appendchaninfo = 1

 

# settings for webif, change for your needs

 

# when removing httpuser and httppwd to access webif without user/pwd,

 

# make sure to limit access only to devices in Lan with parameter httpallowed

 

[webif]

 

httpport = 1180 ( of een andere poort )

 

httpuser = root

 

httppwd = 12345 (of een ander wachtwoord )

 

httprefresh = 10

 

httphideidleclients = 1

 

httpallowed = 192.168.0.1-192.168.0.254,192.168.1.1-192.168.1.254,192.168.178.1-192.168.178.254

 

# settings for newcamd-clients, change for your needs

 

[newcamd]

 

#key = 0102030405060708091011121314

 

#port = 10001@1702:000000

 

#port = 10002@1830:000000

 

#port = 10003@0d05:000004

 

#port = 10004@0d95:000004

 

# settings for camd3-clients, change for your needs

 

[cs357x]

 

#Port = 24110

 

# settings for cccam-clients, change for your needs

 

[cccam]

 

port = 1001 ( of een andere poort )

 

reshare = 1

 

forward_origin_card = 0

 

ignorereshare = 0

 

version = 2.1.4

 

minimizecards = 0

 

keepconnected = 1

 

stealth = 0

 

reshare_mode = 0

 

updateinterval = 240

aangepast door bertuss
Link naar reactie
Delen op andere sites

Bertus,

 

wederom bedankt, ik ga dit vanmiddag testen.

 

Hoe moet ik uiteindelijk de client hierop connecten en op basis van oscam stable??? of cccam, en met welke config?

 

thnx

VU+ DUO | ET9000 | Qnap TS-459pro+ | Qnap TS-239pro | HDI Dune prime 3.0 | WRT320N | AXIS 210 | AXIS 1031w |

Link naar reactie
Delen op andere sites

Als je nu geen USB cardreader hebt, zou je dan ook een mapping kunnen maken van een DM7000 of DM500 of DM800.

 

Dus mijn kaart zit in een dreambox, en de cardreader share ik als cardreader, en dan een mapping zoals het net is, dat de kaart rechtstreeks aangesloten is op het kastje.

 

ZOALS protocol = mouse maar dan niet aangesloten, maar share.

Dreambox 7000S & 500 & 800 - Maxtor 80GB en Samsung 500GB - USBstick Swap - schotel 80 & 110cm - Moteck SG2100 - lnb titanium 0,2 db & duo lnb - openPLI - Satje07 settings - cccam 2.1.4

Link naar reactie
Delen op andere sites

Gezien de ontwikkelingen bij CCcam wil ik graag volledig van CCcam af.

 

Als ik een user aanmaak (oscam.user) op de client moet ik dit bestand dan gewoon in de map var/etc zetten en op de client de plugin oscam.stable installeren?

 

Ik heb het heel even met CCcam geprobeerd en had 2 seconden beeld en toen voel hij weer weg, vast iets in de config maar ik ben nog alles aan het uitvogelen.

 

thnx alvast.

VU+ DUO | ET9000 | Qnap TS-459pro+ | Qnap TS-239pro | HDI Dune prime 3.0 | WRT320N | AXIS 210 | AXIS 1031w |

Link naar reactie
Delen op andere sites

  • 10 maanden later...

Hallo,

 

Ik heb ook een poging gedaan om Bertuss zijn Image op mijn NSLU te krijgen, maar helaas bleef het Ready lampje rood/groen knipperen.

Mijn eerste firmware was openslug, deze had ik vervangen door orginele firmware. Nadien de NSLU opnieuw geflashed met "Bertuss" maar helaas het lampje bleef knipperen.

Weet iemand raad? Misschien wil bertuss zijn huidige image posten zodat ik deze kan testen.

 

Alvast bedankt,

 

Dreambox

Link naar reactie
Delen op andere sites

Maak een account aan of log in om te reageren

Je moet een lid zijn om een reactie te kunnen achterlaten

Account aanmaken

Registreer voor een nieuwe account in onze community. Het is erg gemakkelijk!

Registreer een nieuwe account

Inloggen

Heb je reeds een account? Log hier in.

Nu inloggen
×
×
  • Nieuwe aanmaken...